Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/arm/mach-omap2
History
Jean Pihet 58cda884ec OMAP3 SDRC: add support for 2 SDRAM chip selects 
Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2
SDRAM parts connected to the SDRC.

This patch adds the following:
- add a new argument of type omap_sdrc_params struct*
to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params
- adapted the OMAP boards files to the new prototype of
omap2_init_common_hw
- add the SDRC 2nd CS registers offsets defines
- adapt the sram sleep code to configure the SDRC for the 2nd CS

Note: If the 2nd param to omap2_init_common_hw is NULL, then the
parameters are not programmed into the SDRC CS1 registers

Tested on 3430 SDP and Beagleboard rev C2 and B5, with
suspend/resume and frequency changes (cpufreq).

Signed-off-by: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-07-24 19:43:25 -06:00
..
board-2430sdp.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
board-3430sdp.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
board-4430sdp.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
board-apollon.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
board-generic.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
board-h4.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
board-ldp.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
board-omap3beagle.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
board-omap3evm.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
board-omap3pandora.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
board-overo.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
board-rx51-peripherals.c OMAP3: RX51: Use OneNAND sync read / write 2009-06-23 13:30:25 +03:00
board-rx51.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
board-zoom-debugboard.c ARM: OMAP3: Add support for OMAP3 Zoom2 board 2009-05-28 14:04:04 -07:00
board-zoom2.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
clock.c OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons 2009-06-19 19:09:32 -06:00
clock.h [ARM] omap: add support for bypassing DPLLs 2009-02-19 17:28:30 +00:00
clock24xx.c Merge branch 'omap-clock-upstream' of git://git.pwsan.com/linux-2.6 into for-next 2009-05-26 14:41:35 -07:00
clock24xx.h ARM: OMAP2/3: Remove OMAP_CM_REGADDR 2009-05-25 11:26:46 -07:00
clock34xx.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
clock34xx.h OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init 2009-05-28 10:59:07 -07:00
clockdomain.c [ARM] omap: ensure that failing power domain lookups produce errors 2009-02-23 14:55:34 +00:00
clockdomains.h OMAP3: PM: D2D clockdomain supports SW supervised transitions 2009-05-28 10:59:08 -07:00
cm-regbits-24xx.h [ARM] OMAP2 PRCM: clean up CM_IDLEST bits 2009-02-08 17:50:37 +00:00
cm-regbits-34xx.h OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init 2009-05-28 10:59:07 -07:00
cm.h ARM: OMAP2/3: Remove OMAP_CM_REGADDR 2009-05-25 11:26:46 -07:00
control.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
devices.c ARM: OMAP2: Fix SPI driver failure on 2420 when running multi-omap config 2009-05-12 11:20:30 -07:00
gpmc-onenand.c OMAP2/3: gpmc-onenand: correct use of async timings 2009-06-23 13:30:24 +03:00
gpmc-smc91x.c ARM: OMAP2/3: Add generic smc91x support when connected to GPMC 2009-05-28 13:23:52 -07:00
gpmc.c ARM: OMAP4: Add minimal support for omap4 2009-05-28 14:16:04 -07:00
id.c OMAP2/3: Add omap_type() for determining GP/EMU/HS 2009-06-23 13:30:23 +03:00
io.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
iommu2.c omap iommu: omap2 architecture specific functions 2009-05-05 14:52:39 +03:00
irq.c OMAP: Add new function to check wether there is irq pending 2009-05-28 10:59:04 -07:00
Kconfig ARM: OMAP4: Add support for 4430 SDP 2009-05-28 14:16:05 -07:00
mailbox.c OMAP2/3: omap mailbox: platform_get_irq() error ignored 2009-06-23 13:30:22 +03:00
Makefile ARM: OMAP4: SMP: Enable SMP support for OMAP4430 2009-06-09 13:04:06 +05:30
Makefile.boot [ARM] 3145/1: OMAP 3a/5: Add support for omap24xx 2005-11-10 14:26:51 +00:00
mcbsp.c [ARM] omap: mcbsp: convert to use fck/ick clocks directly 2009-02-08 17:50:19 +00:00
mmc-twl4030.c OMAP2/3: mmc-twl4030: use correct controller in twl_mmc23_set_power 2009-06-23 13:30:22 +03:00
mmc-twl4030.h ARM: OMAP3: mmc-twl4030 uses regulator framework 2009-05-28 14:04:03 -07:00
mux.c ARM: OMAP3: Add more GPIO mux options 2009-03-23 18:51:21 -07:00
omap-headsmp.S ARM: OMAP4: SMP: Add OMAP4430 SMP board files 2009-06-09 13:03:50 +05:30
omap-smp.c ARM: OMAP4: SMP: Add OMAP4430 SMP board files 2009-06-09 13:03:50 +05:30
omap3-iommu.c omap iommu: add MPU_BRIDGE_IOMMU for tidspbridge migration 2009-05-22 10:17:02 +03:00
pm-debug.c OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
pm.h OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
pm24xx.c OMAP3: PM: UART: disable clocks when idle and off-mode support 2009-05-28 10:59:06 -07:00
pm34xx.c OMAP3: PM: prevent module wakeups from waking IVA2 2009-05-28 10:59:10 -07:00
powerdomain.c OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons 2009-06-19 19:09:32 -06:00
powerdomains.h [ARM] OMAP3 powerdomains: make USBTLL SAR only available on ES3.1 and beyond 2009-02-23 14:52:51 +00:00
powerdomains24xx.h ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains 2008-08-19 11:08:42 +03:00
powerdomains34xx.h [ARM] OMAP3 powerdomains: make USBTLL SAR only available on ES3.1 and beyond 2009-02-23 14:52:51 +00:00
prcm-common.h OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
prcm.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
prm-regbits-24xx.h ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains 2008-08-19 11:08:42 +03:00
prm-regbits-34xx.h ARM: OMAP3: Fix HW SAVEANDRESTORE shift define 2009-05-16 08:28:17 -07:00
prm.h OMAP3: PM: prevent module wakeups from waking IVA2 2009-05-28 10:59:10 -07:00
sdram-micron-mt46h32m32lf-6.h ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6, v2 2009-05-28 14:03:59 -07:00
sdram-qimonda-hyb18m512160af-6.h ARM: OMAP3: SDRC: add timing data for Qimonda HYB18M512160AF-6 2009-05-28 14:03:59 -07:00
sdrc.c OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
sdrc.h [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
sdrc2xxx.c ARM: OMAP2/3: Remove OMAP_PRM_REGADDR and OMAP2_PRM_BASE 2009-05-25 11:26:42 -07:00
serial.c Merge branch 'omap4' into for-next 2009-05-28 15:45:14 -07:00
sleep24xx.S OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
sleep34xx.S OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
sram34xx.S OMAP3 SDRC: add support for 2 SDRAM chip selects 2009-07-24 19:43:25 -06:00
sram242x.S ARM: OMAP2/3: Remove OMAP_PRM_REGADDR and OMAP2_PRM_BASE 2009-05-25 11:26:42 -07:00
sram243x.S ARM: OMAP2/3: Remove OMAP_PRM_REGADDR and OMAP2_PRM_BASE 2009-05-25 11:26:42 -07:00
timer-gp.c ARM: OMAP4: SMP: Add mpu timer support for OMAP4430 2009-06-09 13:03:59 +05:30
timer-mpu.c ARM: OMAP4: SMP: Add mpu timer support for OMAP4430 2009-06-09 13:03:59 +05:30
usb-musb.c OMAP3: PM: Ensure MUSB block can idle when driver not loaded 2009-05-28 10:59:09 -07:00
usb-tusb6010.c ARM: OMAP2: Fix tusb6010 init error and compilation warning 2009-05-12 11:20:02 -07:00