Now that the arm pmu code is limited to CPU PMUs the get_hw_events()
function is superfluous, as we'll always have a set of per-cpu
pmu_hw_events structures.
This patch removes the get_hw_events() function, replacing it with
a percpu hw_events pointer. Uses of get_hw_events are updated to use
this_cpu_ptr.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The perf userspace tools can't handle dashes or spaces in PMU names,
which conflicts with the current naming scheme in the arm perf backend.
This prevents these PMUs from being accessed by name from the perf
tools. Additionally the ARMv6 pmus are named "v6", which does not fully
distinguish them in the sys/bus/event_source namespace.
This patch renames the PMUs consistently to a lower case form with
underscores, e.g. "armv6_1176", "armv7_cortex_a9". This is both readily
accepted by today's perf tool, and far easier to type than the
(apparently unused) convention in use previously. The OProfile name
conversion code is updated to handle this.
Due to a copy-paste error involving two "xscale1" entries, "xscale2" has
never been matched by the name OProfile name mapping. While we're
updating names, this is corrected.
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[sachin: fixed missing semicolons in armv6 backend]
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that we have macros for declaring fully invalid event maps, put them
to work for all the ARMv6 PMU event maps. While this necessitates
repeating common indices, we no longer need to refer to *_UNSUPPORTED
events at all, and it makes it possible for the even maps to fit on a
single page on a reasonably sized monitor.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
ARM has a harvard cache architecture and cannot write directly to the
I-side.
This patch removes the L1I write events from the cache map (which
previously returned *read* events in many cases).
Reported-by: Mike Williams <michael.williams@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The arm_pmu functions have wildly varied parameters which can often be
derived from struct perf_event.
This patch changes the arm_pmu function prototypes so that struct
perf_event pointers are passed in preference to fields that can be
derived from the event.
Signed-off-by: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Supporting multiple, heterogeneous CPU PMUs requires us to allocate the
arm_pmu structures dynamically as the devices are probed.
This patch removes the static structure definitions for each CPU PMU
type and instead passes pointers to the PMU-specific init functions.
Signed-off-by: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The CPU PMU code is tightly coupled with generic ARM PMU handling code.
This makes it cumbersome when trying to add support for other ARM PMUs
(e.g. interconnect, L2 cache controller, bus) as the generic parts of
the code are not readily reusable.
This patch cleans up perf_event.c so that reusable code is exposed via
header files to other potential PMU drivers. The CPU code is
consistently named to identify it as such and also to prepare for moving
it into a separate file.
Signed-off-by: Will Deacon <will.deacon@arm.com>
The CPU PMU is probed using the current cpuid information as part of the
early_initcall initialising the architecture perf backend. For
architectures without NMI (such as ARM), this does not need to be
performed early and can be deferred to the driver probe callback. This
also allows us to probe the devicetree in preference to parsing the
current cpuid, which may be invalid on a big.LITTLE multi-cluster
system.
This patch defers the PMU probing and uses the devicetree information
when available.
Signed-off-by: Will Deacon <will.deacon@arm.com>
In order to provide PMU name strings compatible with the OProfile
user ABI, an enumeration of all PMUs is currently used by perf to
identify each PMU uniquely. Unfortunately, this does not scale well
in the presence of multiple PMUs and creates a single, global namespace
across all PMUs in the system.
This patch removes the enumeration and instead uses the name string
for the PMU to map onto the OProfile variant. perf_pmu_name is
implemented for CPU PMUs, which is all that OProfile cares about anyway.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
We always need to pass the last sample period to
perf_sample_data_init(), otherwise the event distribution will be
wrong. Thus, modifiyng the function interface with the required period
as argument. So basically a pattern like this:
perf_sample_data_init(&data, ~0ULL);
data.period = event->hw.last_period;
will now be like that:
perf_sample_data_init(&data, ~0ULL, event->hw.last_period);
Avoids unininitialized data.period and simplifies code.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-3-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The PMU IRQ handlers in perf assume that if a counter has overflowed
then perf must be responsible. In the paranoid world of crazy hardware,
this could be false, so check that we do have a valid event before
attempting to dereference NULL in the interrupt path.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
On ARM, the PMU does not stop counting after an overflow and therefore
IRQ latency affects the new counter value read by the kernel. This is
significant for non-sampling runs where it is possible for the new value
to overtake the previous one, causing the delta to be out by up to
max_period events.
Commit a737823d ("ARM: 6835/1: perf: ensure overflows aren't missed due
to IRQ latency") attempted to fix this problem by allowing interrupt
handlers to pass an overflow flag to the event update function, causing
the overflow calculation to assume that the counter passed through zero
when going from prev to new. Unfortunately, this doesn't work when
overflow occurs on the perf_task_tick path because we have the flag
cleared and end up computing a large negative delta.
This patch removes the overflow flag from armpmu_event_update and
instead limits the sample_period to half of the max_period for
non-sampling profiling runs.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 8f622422 ("perf events: Add generic front-end and back-end
stalled cycle event definitions") added two new ABI events for counting
stalled cycles.
This patch adds support for these new events to the ARM perf
implementation.
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently struct cpu_hw_events stores data on events running on a
PMU associated with a CPU. As this data is general enough to be used
for system PMUs, this name is a misnomer, and may cause confusion when
it is used for system PMUs.
Additionally, 'armpmu' is commonly used as a parameter name for an
instance of struct arm_pmu. The name is also used for a global instance
which represents the CPU's PMU.
As cpu_hw_events is now not tied to CPU PMUs, it is renamed to
pmu_hw_events, with instances of it renamed similarly. As the global
'armpmu' is CPU-specfic, it is renamed to cpu_pmu. This should make it
clearer which code is generic, and which is coupled with the CPU.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently mapping an event type to a hardware configuration value
depends on the data being pointed to from struct arm_pmu. These fields
(cache_map, event_map, raw_event_mask) are currently specific to CPU
PMUs, and do not serve the general case well.
This patch replaces the event map pointers on struct arm_pmu with a new
'map_event' function pointer. Small shim functions are used to reuse
the existing common code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently, a single lock serialises access to CPU PMU registers. This
global locking is unnecessary as PMU registers are local to the CPU
they monitor.
This patch replaces the global lock with a per-CPU lock. As the lock is
in struct cpu_hw_events, PMUs providing a single cpu_hw_events instance
can be locked globally.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently, pmu_hw_events::active_mask is used to keep track of which
events are active in hardware. As we can stop counters and their
interrupts, this is unnecessary.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the ARMv7 PMU backend indexes event counters from zero, follow
suit and do the same for ARMv6 and Xscale.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch removes const qualifiers from instances of struct arm_pmu,
and functions initialising them, in preparation for generalising
arm_pmu usage to system (AKA uncore) PMUs.
This will allow for dynamically modifiable structures (locks,
struct pmu) to be added as members of struct arm_pmu.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add a NODE level to the generic cache events which is used to measure
local vs remote memory accesses. Like all other cache events, an
ACCESS is HIT+MISS, if there is no way to distinguish between reads
and writes do reads only etc..
The below needs filling out for !x86 (which I filled out with
unsupported events).
I'm fairly sure ARM can leave it like that since it doesn't strike me as
an architecture that even has NUMA support. SH might have something since
it does appear to have some NUMA bits.
Sparc64, PowerPC and MIPS certainly want a good look there since they
clearly are NUMA capable.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Miller <davem@davemloft.net>
Cc: Anton Blanchard <anton@samba.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1303508226.4865.8.camel@laptop
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.
For the various event classes:
- hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
the PMI-tail (ARM etc.)
- tracepoint: nmi=0; since tracepoint could be from NMI context.
- software: nmi=[0,1]; some, like the schedule thing cannot
perform wakeups, and hence need 0.
As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).
The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If a counter overflows during a perf stat profiling run it may overtake
the last known value of the counter:
0 prev new 0xffffffff
|----------|-------|----------------------|
In this case, the number of events that have occurred is
(0xffffffff - prev) + new. Unfortunately, the event update code will
not realise an overflow has occurred and will instead report the event
delta as (new - prev) which may be considerably smaller than the real
count.
This patch adds an extra argument to armpmu_event_update which indicates
whether or not an overflow has occurred. If an overflow has occurred
then we use the maximum period of the counter to calculate the elapsed
events.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reported-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Introduce a CPU_V6K configuration option for platforms to select if they
have a V6K CPU core. This allows us to identify whether we need to
support ARMv6 CPUs without the V6K SMP extensions at build time.
Currently CPU_V6K is just an alias for CPU_V6, and all places which
reference CPU_V6 are replaced by (CPU_V6 || CPU_V6K).
Select CPU_V6K from platforms which are known to be V6K-only.
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
For kernels built with PREEMPT_RT, critical sections protected
by standard spinlocks are preemptible. This is not acceptable
on perf as (a) we may be scheduled onto a different CPU whilst
reading/writing banked PMU registers and (b) the latency when
reading the PMU registers becomes unpredictable.
This patch upgrades the pmu_lock spinlock to a raw_spinlock
instead.
Reported-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell reported a number of warnings coming from sparse when
checking the ARM perf_event.c files:
| perf_event.c seems to also have problems too:
|
| CHECK arch/arm/kernel/perf_event.c
| arch/arm/kernel/perf_event.c:37:1: warning: symbol 'pmu_lock' was not declared. Should it be static?
| arch/arm/kernel/perf_event.c:70:1: warning: symbol 'cpu_hw_events' was not declared. Should it be static?
| arch/arm/kernel/perf_event.c:1006:1: warning: symbol 'armv6pmu_enable_event' was not declared. Should it be static?
| arch/arm/kernel/perf_event.c:1113:1: warning: symbol 'armv6pmu_stop' was not declared. Should it be static?
| arch/arm/kernel/perf_event.c:1956:6: warning: symbol 'armv7pmu_enable_event' was not declared. Should it be static?
| arch/arm/kernel/perf_event.c:3072:14: warning: incorrect type in argument 1 (different address spaces)
| arch/arm/kernel/perf_event.c:3072:14: expected void const volatile [noderef] <asn:1>*<noident>
| arch/arm/kernel/perf_event.c:3072:14: got struct frame_tail *tail
| arch/arm/kernel/perf_event.c:3074:49: warning: incorrect type in argument 2 (different address spaces)
| arch/arm/kernel/perf_event.c:3074:49: expected void const [noderef] <asn:1>*from
| arch/arm/kernel/perf_event.c:3074:49: got struct frame_tail *tail
This patch resolves these issues so we can live in silence
again.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The ARM perf_event.c file contains all PMU backends and, as new PMUs
are introduced, will continue to grow.
This patch follows the example of x86 and splits the PMU implementations
into separate files which are then #included back into the main
file. Compile-time guards are added to each PMU file to avoid compiling
in code that is not relevant for the version of the architecture which
we are targetting.
Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
