kernel-fxtec-pro1x/drivers/media/video/saa7134/saa7134-input.c
Jean Delvare aef02aa1e2 V4L/DVB (13234): IR device at I2C address 0x7a
The i2c core prevents us from probing I2C address 0x7a because it's
not a valid 7-bit address (reserved for 10-bit addressing.) So we must
stop probing this address, and explicitly list all adapters which use
it. Under the assumption that only the Upmost Purple TV adapter uses
this invalid address, this fix should do the trick.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: hermann pitton <hermann-pitton@arcor.de>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:02 -02:00

959 lines
25 KiB
C

/*
*
* handle saa7134 IR remotes via linux kernel input layer.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include "saa7134-reg.h"
#include "saa7134.h"
static unsigned int disable_ir;
module_param(disable_ir, int, 0444);
MODULE_PARM_DESC(disable_ir,"disable infrared remote support");
static unsigned int ir_debug;
module_param(ir_debug, int, 0644);
MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]");
static int pinnacle_remote;
module_param(pinnacle_remote, int, 0644); /* Choose Pinnacle PCTV remote */
MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=grey (defaults to 0)");
static int ir_rc5_remote_gap = 885;
module_param(ir_rc5_remote_gap, int, 0644);
static int ir_rc5_key_timeout = 115;
module_param(ir_rc5_key_timeout, int, 0644);
static int repeat_delay = 500;
module_param(repeat_delay, int, 0644);
MODULE_PARM_DESC(repeat_delay, "delay before key repeat started");
static int repeat_period = 33;
module_param(repeat_period, int, 0644);
MODULE_PARM_DESC(repeat_period, "repeat period between "
"keypresses when key is down");
static unsigned int disable_other_ir;
module_param(disable_other_ir, int, 0644);
MODULE_PARM_DESC(disable_other_ir, "disable full codes of "
"alternative remotes from other manufacturers");
#define dprintk(fmt, arg...) if (ir_debug) \
printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg)
#define i2cdprintk(fmt, arg...) if (ir_debug) \
printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg)
/* Helper functions for RC5 and NEC decoding at GPIO16 or GPIO18 */
static int saa7134_rc5_irq(struct saa7134_dev *dev);
static int saa7134_nec_irq(struct saa7134_dev *dev);
static void nec_task(unsigned long data);
static void saa7134_nec_timer(unsigned long data);
/* -------------------- GPIO generic keycode builder -------------------- */
static int build_key(struct saa7134_dev *dev)
{
struct card_ir *ir = dev->remote;
u32 gpio, data;
/* here comes the additional handshake steps for some cards */
switch (dev->board) {
case SAA7134_BOARD_GOTVIEW_7135:
saa_setb(SAA7134_GPIO_GPSTATUS1, 0x80);
saa_clearb(SAA7134_GPIO_GPSTATUS1, 0x80);
break;
}
/* rising SAA7134_GPIO_GPRESCAN reads the status */
saa_clearb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN);
saa_setb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN);
gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
if (ir->polling) {
if (ir->last_gpio == gpio)
return 0;
ir->last_gpio = gpio;
}
data = ir_extract_bits(gpio, ir->mask_keycode);
dprintk("build_key gpio=0x%x mask=0x%x data=%d\n",
gpio, ir->mask_keycode, data);
switch (dev->board) {
case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
if (data == ir->mask_keycode)
ir_input_nokey(ir->dev, &ir->ir);
else
ir_input_keydown(ir->dev, &ir->ir, data, data);
return 0;
}
if (ir->polling) {
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
ir_input_keydown(ir->dev, &ir->ir, data, data);
} else {
ir_input_nokey(ir->dev, &ir->ir);
}
}
else { /* IRQ driven mode - handle key press and release in one go */
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
ir_input_keydown(ir->dev, &ir->ir, data, data);
ir_input_nokey(ir->dev, &ir->ir);
}
}
return 0;
}
/* --------------------- Chip specific I2C key builders ----------------- */
static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
u32 *ir_raw)
{
unsigned char b;
int gpio;
/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
struct saa7134_dev *dev = ir->c->adapter->algo_data;
if (dev == NULL) {
dprintk("get_key_msi_tvanywhere_plus: "
"gir->c->adapter->algo_data is NULL!\n");
return -EIO;
}
/* rising SAA7134_GPIO_GPRESCAN reads the status */
saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
/* GPIO&0x40 is pulsed low when a button is pressed. Don't do
I2C receive if gpio&0x40 is not low. */
if (gpio & 0x40)
return 0; /* No button press */
/* GPIO says there is a button press. Get it. */
if (1 != i2c_master_recv(ir->c, &b, 1)) {
i2cdprintk("read error\n");
return -EIO;
}
/* No button press */
if (b == 0xff)
return 0;
/* Button pressed */
dprintk("get_key_msi_tvanywhere_plus: Key = 0x%02X\n", b);
*ir_key = b;
*ir_raw = b;
return 1;
}
static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
unsigned char b;
/* poll IR chip */
if (1 != i2c_master_recv(ir->c, &b, 1)) {
i2cdprintk("read error\n");
return -EIO;
}
/* no button press */
if (b==0)
return 0;
/* repeating */
if (b & 0x80)
return 1;
*ir_key = b;
*ir_raw = b;
return 1;
}
static int get_key_hvr1110(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
unsigned char buf[5], cod4, code3, code4;
/* poll IR chip */
if (5 != i2c_master_recv(ir->c, buf, 5))
return -EIO;
cod4 = buf[4];
code4 = (cod4 >> 2);
code3 = buf[3];
if (code3 == 0)
/* no key pressed */
return 0;
/* return key */
*ir_key = code4;
*ir_raw = code4;
return 1;
}
static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
unsigned char data[12];
u32 gpio;
struct saa7134_dev *dev = ir->c->adapter->algo_data;
/* rising SAA7134_GPIO_GPRESCAN reads the status */
saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
if (0x400000 & ~gpio)
return 0; /* No button press */
ir->c->addr = 0x5a >> 1;
if (12 != i2c_master_recv(ir->c, data, 12)) {
i2cdprintk("read error\n");
return -EIO;
}
/* IR of this card normally decode signals NEC-standard from
* - Sven IHOO MT 5.1R remote. xxyye718
* - Sven DVD HD-10xx remote. xxyyf708
* - BBK ...
* - mayby others
* So, skip not our, if disable full codes mode.
*/
if (data[10] != 0x6b && data[11] != 0x86 && disable_other_ir)
return 0;
/* Wrong data decode fix */
if (data[9] != (unsigned char)(~data[8]))
return 0;
*ir_key = data[9];
*ir_raw = data[9];
return 1;
}
/* Common (grey or coloured) pinnacle PCTV remote handling
*
*/
static int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw,
int parity_offset, int marker, int code_modulo)
{
unsigned char b[4];
unsigned int start = 0,parity = 0,code = 0;
/* poll IR chip */
if (4 != i2c_master_recv(ir->c, b, 4)) {
i2cdprintk("read error\n");
return -EIO;
}
for (start = 0; start < ARRAY_SIZE(b); start++) {
if (b[start] == marker) {
code=b[(start+parity_offset + 1) % 4];
parity=b[(start+parity_offset) % 4];
}
}
/* Empty Request */
if (parity == 0)
return 0;
/* Repeating... */
if (ir->old == parity)
return 0;
ir->old = parity;
/* drop special codes when a key is held down a long time for the grey controller
In this case, the second bit of the code is asserted */
if (marker == 0xfe && (code & 0x40))
return 0;
code %= code_modulo;
*ir_raw = code;
*ir_key = code;
i2cdprintk("Pinnacle PCTV key %02x\n", code);
return 1;
}
/* The grey pinnacle PCTV remote
*
* There are one issue with this remote:
* - I2c packet does not change when the same key is pressed quickly. The workaround
* is to hold down each key for about half a second, so that another code is generated
* in the i2c packet, and the function can distinguish key presses.
*
* Sylvain Pasche <sylvain.pasche@gmail.com>
*/
static int get_key_pinnacle_grey(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
return get_key_pinnacle(ir, ir_key, ir_raw, 1, 0xfe, 0xff);
}
/* The new pinnacle PCTV remote (with the colored buttons)
*
* Ricardo Cerqueira <v4l@cerqueira.org>
*/
static int get_key_pinnacle_color(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
/* code_modulo parameter (0x88) is used to reduce code value to fit inside IR_KEYTAB_SIZE
*
* this is the only value that results in 42 unique
* codes < 128
*/
return get_key_pinnacle(ir, ir_key, ir_raw, 2, 0x80, 0x88);
}
void saa7134_input_irq(struct saa7134_dev *dev)
{
struct card_ir *ir = dev->remote;
if (ir->nec_gpio) {
saa7134_nec_irq(dev);
} else if (!ir->polling && !ir->rc5_gpio) {
build_key(dev);
} else if (ir->rc5_gpio) {
saa7134_rc5_irq(dev);
}
}
static void saa7134_input_timer(unsigned long data)
{
struct saa7134_dev *dev = (struct saa7134_dev *)data;
struct card_ir *ir = dev->remote;
build_key(dev);
mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
}
void saa7134_ir_start(struct saa7134_dev *dev, struct card_ir *ir)
{
if (ir->polling) {
setup_timer(&ir->timer, saa7134_input_timer,
(unsigned long)dev);
ir->timer.expires = jiffies + HZ;
add_timer(&ir->timer);
} else if (ir->rc5_gpio) {
/* set timer_end for code completion */
init_timer(&ir->timer_end);
ir->timer_end.function = ir_rc5_timer_end;
ir->timer_end.data = (unsigned long)ir;
init_timer(&ir->timer_keyup);
ir->timer_keyup.function = ir_rc5_timer_keyup;
ir->timer_keyup.data = (unsigned long)ir;
ir->shift_by = 2;
ir->start = 0x2;
ir->addr = 0x17;
ir->rc5_key_timeout = ir_rc5_key_timeout;
ir->rc5_remote_gap = ir_rc5_remote_gap;
} else if (ir->nec_gpio) {
setup_timer(&ir->timer_keyup, saa7134_nec_timer,
(unsigned long)dev);
tasklet_init(&ir->tlet, nec_task, (unsigned long)dev);
}
}
void saa7134_ir_stop(struct saa7134_dev *dev)
{
if (dev->remote->polling)
del_timer_sync(&dev->remote->timer);
}
int saa7134_input_init1(struct saa7134_dev *dev)
{
struct card_ir *ir;
struct input_dev *input_dev;
struct ir_scancode_table *ir_codes = NULL;
u32 mask_keycode = 0;
u32 mask_keydown = 0;
u32 mask_keyup = 0;
int polling = 0;
int rc5_gpio = 0;
int nec_gpio = 0;
int ir_type = IR_TYPE_OTHER;
int err;
if (dev->has_remote != SAA7134_REMOTE_GPIO)
return -ENODEV;
if (disable_ir)
return -ENODEV;
/* detect & configure */
switch (dev->board) {
case SAA7134_BOARD_FLYVIDEO2000:
case SAA7134_BOARD_FLYVIDEO3000:
case SAA7134_BOARD_FLYTVPLATINUM_FM:
case SAA7134_BOARD_FLYTVPLATINUM_MINI2:
case SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM:
ir_codes = &ir_codes_flyvideo_table;
mask_keycode = 0xEC00000;
mask_keydown = 0x0040000;
break;
case SAA7134_BOARD_CINERGY400:
case SAA7134_BOARD_CINERGY600:
case SAA7134_BOARD_CINERGY600_MK3:
ir_codes = &ir_codes_cinergy_table;
mask_keycode = 0x00003f;
mask_keyup = 0x040000;
break;
case SAA7134_BOARD_ECS_TVP3XP:
case SAA7134_BOARD_ECS_TVP3XP_4CB5:
ir_codes = &ir_codes_eztv_table;
mask_keycode = 0x00017c;
mask_keyup = 0x000002;
polling = 50; // ms
break;
case SAA7134_BOARD_KWORLD_XPERT:
case SAA7134_BOARD_AVACSSMARTTV:
ir_codes = &ir_codes_pixelview_table;
mask_keycode = 0x00001F;
mask_keyup = 0x000020;
polling = 50; // ms
break;
case SAA7134_BOARD_MD2819:
case SAA7134_BOARD_KWORLD_VSTREAM_XPERT:
case SAA7134_BOARD_AVERMEDIA_305:
case SAA7134_BOARD_AVERMEDIA_307:
case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
case SAA7134_BOARD_AVERMEDIA_STUDIO_505:
case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
case SAA7134_BOARD_AVERMEDIA_STUDIO_507:
case SAA7134_BOARD_AVERMEDIA_STUDIO_507UA:
case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
case SAA7134_BOARD_AVERMEDIA_M102:
case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS:
ir_codes = &ir_codes_avermedia_table;
mask_keycode = 0x0007C8;
mask_keydown = 0x000010;
polling = 50; // ms
/* Set GPIO pin2 to high to enable the IR controller */
saa_setb(SAA7134_GPIO_GPMODE0, 0x4);
saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
break;
case SAA7134_BOARD_AVERMEDIA_M135A:
ir_codes = &ir_codes_avermedia_m135a_table;
mask_keydown = 0x0040000;
mask_keycode = 0x00013f;
nec_gpio = 1;
break;
case SAA7134_BOARD_AVERMEDIA_777:
case SAA7134_BOARD_AVERMEDIA_A16AR:
ir_codes = &ir_codes_avermedia_table;
mask_keycode = 0x02F200;
mask_keydown = 0x000400;
polling = 50; // ms
/* Without this we won't receive key up events */
saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
break;
case SAA7134_BOARD_AVERMEDIA_A16D:
ir_codes = &ir_codes_avermedia_a16d_table;
mask_keycode = 0x02F200;
mask_keydown = 0x000400;
polling = 50; /* ms */
/* Without this we won't receive key up events */
saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
break;
case SAA7134_BOARD_KWORLD_TERMINATOR:
ir_codes = &ir_codes_pixelview_table;
mask_keycode = 0x00001f;
mask_keyup = 0x000060;
polling = 50; // ms
break;
case SAA7134_BOARD_MANLI_MTV001:
case SAA7134_BOARD_MANLI_MTV002:
ir_codes = &ir_codes_manli_table;
mask_keycode = 0x001f00;
mask_keyup = 0x004000;
polling = 50; /* ms */
break;
case SAA7134_BOARD_BEHOLD_409FM:
case SAA7134_BOARD_BEHOLD_401:
case SAA7134_BOARD_BEHOLD_403:
case SAA7134_BOARD_BEHOLD_403FM:
case SAA7134_BOARD_BEHOLD_405:
case SAA7134_BOARD_BEHOLD_405FM:
case SAA7134_BOARD_BEHOLD_407:
case SAA7134_BOARD_BEHOLD_407FM:
case SAA7134_BOARD_BEHOLD_409:
case SAA7134_BOARD_BEHOLD_505FM:
case SAA7134_BOARD_BEHOLD_505RDS:
case SAA7134_BOARD_BEHOLD_507_9FM:
case SAA7134_BOARD_BEHOLD_507RDS_MK3:
case SAA7134_BOARD_BEHOLD_507RDS_MK5:
ir_codes = &ir_codes_manli_table;
mask_keycode = 0x003f00;
mask_keyup = 0x004000;
polling = 50; /* ms */
break;
case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
ir_codes = &ir_codes_behold_columbus_table;
mask_keycode = 0x003f00;
mask_keyup = 0x004000;
polling = 50; // ms
break;
case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS:
ir_codes = &ir_codes_pctv_sedna_table;
mask_keycode = 0x001f00;
mask_keyup = 0x004000;
polling = 50; // ms
break;
case SAA7134_BOARD_GOTVIEW_7135:
ir_codes = &ir_codes_gotview7135_table;
mask_keycode = 0x0003CC;
mask_keydown = 0x000010;
polling = 5; /* ms */
saa_setb(SAA7134_GPIO_GPMODE1, 0x80);
break;
case SAA7134_BOARD_VIDEOMATE_TV_PVR:
case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS:
case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII:
ir_codes = &ir_codes_videomate_tv_pvr_table;
mask_keycode = 0x00003F;
mask_keyup = 0x400000;
polling = 50; // ms
break;
case SAA7134_BOARD_PROTEUS_2309:
ir_codes = &ir_codes_proteus_2309_table;
mask_keycode = 0x00007F;
mask_keyup = 0x000080;
polling = 50; // ms
break;
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
ir_codes = &ir_codes_videomate_tv_pvr_table;
mask_keycode = 0x003F00;
mask_keyup = 0x040000;
break;
case SAA7134_BOARD_FLYDVBS_LR300:
case SAA7134_BOARD_FLYDVBT_LR301:
case SAA7134_BOARD_FLYDVBTDUO:
ir_codes = &ir_codes_flydvb_table;
mask_keycode = 0x0001F00;
mask_keydown = 0x0040000;
break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
case SAA7134_BOARD_ASUSTeK_P7131_ANALOG:
ir_codes = &ir_codes_asus_pc39_table;
mask_keydown = 0x0040000;
rc5_gpio = 1;
break;
case SAA7134_BOARD_ENCORE_ENLTV:
case SAA7134_BOARD_ENCORE_ENLTV_FM:
ir_codes = &ir_codes_encore_enltv_table;
mask_keycode = 0x00007f;
mask_keyup = 0x040000;
polling = 50; // ms
break;
case SAA7134_BOARD_ENCORE_ENLTV_FM53:
ir_codes = &ir_codes_encore_enltv_fm53_table;
mask_keydown = 0x0040000;
mask_keycode = 0x00007f;
nec_gpio = 1;
break;
case SAA7134_BOARD_10MOONSTVMASTER3:
ir_codes = &ir_codes_encore_enltv_table;
mask_keycode = 0x5f80000;
mask_keyup = 0x8000000;
polling = 50; //ms
break;
case SAA7134_BOARD_GENIUS_TVGO_A11MCE:
ir_codes = &ir_codes_genius_tvgo_a11mce_table;
mask_keycode = 0xff;
mask_keydown = 0xf00000;
polling = 50; /* ms */
break;
case SAA7134_BOARD_REAL_ANGEL_220:
ir_codes = &ir_codes_real_audio_220_32_keys_table;
mask_keycode = 0x3f00;
mask_keyup = 0x4000;
polling = 50; /* ms */
break;
case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
ir_codes = &ir_codes_kworld_plus_tv_analog_table;
mask_keycode = 0x7f;
polling = 40; /* ms */
break;
case SAA7134_BOARD_VIDEOMATE_S350:
ir_codes = &ir_codes_videomate_s350_table;
mask_keycode = 0x003f00;
mask_keydown = 0x040000;
break;
}
if (NULL == ir_codes) {
printk("%s: Oops: IR config error [card=%d]\n",
dev->name, dev->board);
return -ENODEV;
}
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
input_dev = input_allocate_device();
if (!ir || !input_dev) {
err = -ENOMEM;
goto err_out_free;
}
ir->dev = input_dev;
/* init hardware-specific stuff */
ir->mask_keycode = mask_keycode;
ir->mask_keydown = mask_keydown;
ir->mask_keyup = mask_keyup;
ir->polling = polling;
ir->rc5_gpio = rc5_gpio;
ir->nec_gpio = nec_gpio;
/* init input device */
snprintf(ir->name, sizeof(ir->name), "saa7134 IR (%s)",
saa7134_boards[dev->board].name);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(dev->pci));
ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_PCI;
input_dev->id.version = 1;
if (dev->pci->subsystem_vendor) {
input_dev->id.vendor = dev->pci->subsystem_vendor;
input_dev->id.product = dev->pci->subsystem_device;
} else {
input_dev->id.vendor = dev->pci->vendor;
input_dev->id.product = dev->pci->device;
}
input_dev->dev.parent = &dev->pci->dev;
dev->remote = ir;
saa7134_ir_start(dev, ir);
err = input_register_device(ir->dev);
if (err)
goto err_out_stop;
/* the remote isn't as bouncy as a keyboard */
ir->dev->rep[REP_DELAY] = repeat_delay;
ir->dev->rep[REP_PERIOD] = repeat_period;
return 0;
err_out_stop:
saa7134_ir_stop(dev);
dev->remote = NULL;
err_out_free:
input_free_device(input_dev);
kfree(ir);
return err;
}
void saa7134_input_fini(struct saa7134_dev *dev)
{
if (NULL == dev->remote)
return;
saa7134_ir_stop(dev);
input_unregister_device(dev->remote->dev);
kfree(dev->remote);
dev->remote = NULL;
}
void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
{
struct i2c_board_info info;
const unsigned short addr_list[] = {
0x47, 0x71, 0x2d,
I2C_CLIENT_END
};
struct i2c_msg msg_msi = {
.addr = 0x50,
.flags = I2C_M_RD,
.len = 0,
.buf = NULL,
};
int rc;
if (disable_ir) {
dprintk("IR has been disabled, not probing for i2c remote\n");
return;
}
memset(&info, 0, sizeof(struct i2c_board_info));
memset(&dev->init_data, 0, sizeof(dev->init_data));
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_PCTV_110i:
case SAA7134_BOARD_PINNACLE_PCTV_310i:
dev->init_data.name = "Pinnacle PCTV";
if (pinnacle_remote == 0) {
dev->init_data.get_key = get_key_pinnacle_color;
dev->init_data.ir_codes = &ir_codes_pinnacle_color_table;
info.addr = 0x47;
} else {
dev->init_data.get_key = get_key_pinnacle_grey;
dev->init_data.ir_codes = &ir_codes_pinnacle_grey_table;
info.addr = 0x47;
}
break;
case SAA7134_BOARD_UPMOST_PURPLE_TV:
dev->init_data.name = "Purple TV";
dev->init_data.get_key = get_key_purpletv;
dev->init_data.ir_codes = &ir_codes_purpletv_table;
info.addr = 0x7a;
break;
case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS:
dev->init_data.name = "MSI TV@nywhere Plus";
dev->init_data.get_key = get_key_msi_tvanywhere_plus;
dev->init_data.ir_codes = &ir_codes_msi_tvanywhere_plus_table;
info.addr = 0x30;
/* MSI TV@nywhere Plus controller doesn't seem to
respond to probes unless we read something from
an existing device. Weird...
REVISIT: might no longer be needed */
rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1);
dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n",
msg_msi.addr, dev->i2c_adap.name,
(1 == rc) ? "yes" : "no");
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
dev->init_data.name = "HVR 1110";
dev->init_data.get_key = get_key_hvr1110;
dev->init_data.ir_codes = &ir_codes_hauppauge_new_table;
break;
case SAA7134_BOARD_BEHOLD_607FM_MK3:
case SAA7134_BOARD_BEHOLD_607FM_MK5:
case SAA7134_BOARD_BEHOLD_609FM_MK3:
case SAA7134_BOARD_BEHOLD_609FM_MK5:
case SAA7134_BOARD_BEHOLD_607RDS_MK3:
case SAA7134_BOARD_BEHOLD_607RDS_MK5:
case SAA7134_BOARD_BEHOLD_609RDS_MK3:
case SAA7134_BOARD_BEHOLD_609RDS_MK5:
case SAA7134_BOARD_BEHOLD_M6:
case SAA7134_BOARD_BEHOLD_M63:
case SAA7134_BOARD_BEHOLD_M6_EXTRA:
case SAA7134_BOARD_BEHOLD_H6:
case SAA7134_BOARD_BEHOLD_X7:
dev->init_data.name = "BeholdTV";
dev->init_data.get_key = get_key_beholdm6xx;
dev->init_data.ir_codes = &ir_codes_behold_table;
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
info.addr = 0x40;
break;
}
if (dev->init_data.name)
info.platform_data = &dev->init_data;
/* No need to probe if address is known */
if (info.addr) {
i2c_new_device(&dev->i2c_adap, &info);
return;
}
/* Address not known, fallback to probing */
i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
}
static int saa7134_rc5_irq(struct saa7134_dev *dev)
{
struct card_ir *ir = dev->remote;
struct timeval tv;
u32 gap;
unsigned long current_jiffies, timeout;
/* get time of bit */
current_jiffies = jiffies;
do_gettimeofday(&tv);
/* avoid overflow with gap >1s */
if (tv.tv_sec - ir->base_time.tv_sec > 1) {
gap = 200000;
} else {
gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
tv.tv_usec - ir->base_time.tv_usec;
}
/* active code => add bit */
if (ir->active) {
/* only if in the code (otherwise spurious IRQ or timer
late) */
if (ir->last_bit < 28) {
ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
ir_rc5_remote_gap;
ir->code |= 1 << ir->last_bit;
}
/* starting new code */
} else {
ir->active = 1;
ir->code = 0;
ir->base_time = tv;
ir->last_bit = 0;
timeout = current_jiffies + (500 + 30 * HZ) / 1000;
mod_timer(&ir->timer_end, timeout);
}
return 1;
}
/* On NEC protocol, One has 2.25 ms, and zero has 1.125 ms
The first pulse (start) has 9 + 4.5 ms
*/
static void saa7134_nec_timer(unsigned long data)
{
struct saa7134_dev *dev = (struct saa7134_dev *) data;
struct card_ir *ir = dev->remote;
dprintk("Cancel key repeat\n");
ir_input_nokey(ir->dev, &ir->ir);
}
static void nec_task(unsigned long data)
{
struct saa7134_dev *dev = (struct saa7134_dev *) data;
struct card_ir *ir;
struct timeval tv;
int count, pulse, oldpulse, gap;
u32 ircode = 0, not_code = 0;
int ngap = 0;
if (!data) {
printk(KERN_ERR "saa713x/ir: Can't recover dev struct\n");
/* GPIO will be kept disabled */
return;
}
ir = dev->remote;
/* rising SAA7134_GPIO_GPRESCAN reads the status */
saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
oldpulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown;
pulse = oldpulse;
do_gettimeofday(&tv);
ir->base_time = tv;
/* Decode NEC pulsecode. This code can take up to 76.5 ms to run.
Unfortunately, using IRQ to decode pulse didn't work, since it uses
a pulse train of 38KHz. This means one pulse on each 52 us
*/
do {
/* Wait until the end of pulse/space or 5 ms */
for (count = 0; count < 500; count++) {
udelay(10);
/* rising SAA7134_GPIO_GPRESCAN reads the status */
saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
pulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2)
& ir->mask_keydown;
if (pulse != oldpulse)
break;
}
do_gettimeofday(&tv);
gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
tv.tv_usec - ir->base_time.tv_usec;
if (!pulse) {
/* Bit 0 has 560 us, while bit 1 has 1120 us.
Do something only if bit == 1
*/
if (ngap && (gap > 560 + 280)) {
unsigned int shift = ngap - 1;
/* Address first, then command */
if (shift < 8) {
shift += 8;
ircode |= 1 << shift;
} else if (shift < 16) {
not_code |= 1 << shift;
} else if (shift < 24) {
shift -= 16;
ircode |= 1 << shift;
} else {
shift -= 24;
not_code |= 1 << shift;
}
}
ngap++;
}
ir->base_time = tv;
/* TIMEOUT - Long pulse */
if (gap >= 5000)
break;
oldpulse = pulse;
} while (ngap < 32);
if (ngap == 32) {
/* FIXME: should check if not_code == ~ircode */
ir->code = ir_extract_bits(ircode, ir->mask_keycode);
dprintk("scancode = 0x%02x (code = 0x%02x, notcode= 0x%02x)\n",
ir->code, ircode, not_code);
ir_input_keydown(ir->dev, &ir->ir, ir->code, ir->code);
} else
dprintk("Repeat last key\n");
/* Keep repeating the last key */
mod_timer(&ir->timer_keyup, jiffies + msecs_to_jiffies(150));
saa_setl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18);
}
static int saa7134_nec_irq(struct saa7134_dev *dev)
{
struct card_ir *ir = dev->remote;
saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18);
tasklet_schedule(&ir->tlet);
return 1;
}