Commit graph

89 commits

Author SHA1 Message Date
Jean Delvare
aef02aa1e2 V4L/DVB (13234): IR device at I2C address 0x7a
The i2c core prevents us from probing I2C address 0x7a because it's
not a valid 7-bit address (reserved for 10-bit addressing.) So we must
stop probing this address, and explicitly list all adapters which use
it. Under the assumption that only the Upmost Purple TV adapter uses
this invalid address, this fix should do the trick.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: hermann pitton <hermann-pitton@arcor.de>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:02 -02:00
Jean Delvare
43e16ea241 V4L/DVB (13233): i2c_board_info can be local
Recent fixes to the em28xx and saa7134 drivers have been overzealous.
While the ir-kbd-i2c platform data indeed needs to be persistent, the
struct i2c_board_info doesn't, as it is only used by i2c_new_device().

So revert a part of the original fixes, to save some memory.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:01 -02:00
Dmitri Belimov
2d21ffe05a V4L/DVB (13001): Key filter for BeholdTV cards.
When fast push-pull button of remote control we can received incorrect
key code 0x00. Key information from IR decoder has ID of remote control 2 bytes,
byte of key code and byte of mirror key code.
Correct data
0x86 0x6B 0x00 0xFF

Wrong data
0x86 0x6B 0x00 0x00

This patch added additional test of mirror byte for filtering.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19 00:52:05 -03:00
Mauro Carvalho Chehab
7aedd5ec87 V4L/DVB (12701): saa7134: ir-kbd-i2c init data needs a persistent object
ir-kbd-i2c's ir_probe() function can be called much later (i.e. at
ir-kbd-i2c module load), than the lifetime of a struct IR_i2c_init_data
allocated off of the stack in cx18_i2c_new_ir() at registration time.
Make sure we pass a pointer to a persistent IR_i2c_init_data object at
i2c registration time.

Thanks to Brian Rogers, Dustin Mitchell, Andy Walls and Jean Delvare to
rise this question.

Before this patch, if ir-kbd-i2c were probed after SAA7134, trash data
were used.

Compile tested only, but the patch is identical to em28xx one. So, it
should work properly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:20:17 -03:00
Mauro Carvalho Chehab
715a223323 V4L/DVB (12595): common/ir: use a struct for keycode tables
Currently, V4L uses a scancode table whose index is the scancode and
the value is the keycode. While this works, it has some drawbacks:

1) It requires that the scancode to be at the range 00-7f;

2) keycodes should be masked on 7 bits in order for it to work;

3) due to the 7 bits approach, sometimes it is not possible to replace
the default keyboard to another one with a different encoding rule;

4) it is different than what is done with dvb-usb approach;

5) it requires a typedef for it to work. This is not a recommended
Linux CodingStyle.

This patch is part of a larger series of IR changes. It basically
replaces the IR_KEYTAB_TYPE tables by a structured table:
struct ir_scancode {
       u16     scancode;
       u32     keycode;
};

This is very close to what dvb does. So, a further integration with DVB
code will be easy.

While we've changed the tables, for now, the IR keycode handling is still
based on the old approach.

The only notable effect is the redution of about 35% of the ir-common
module size:

   text    data     bss     dec     hex filename
   6721   29208       4   35933    8c5d old/ir-common.ko
   5756   18040       4   23800    5cf8 new/ir-common.ko

In thesis, we could be using above u8 for scancode, reducing even more the size
of the module, but defining it as u16 is more convenient, since, on dvb, each
scancode has up to 16 bits, and we currently have a few troubles with rc5, as their
scancodes are defined with more than 8 bits.

This patch itself shouldn't be doing any functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:19:47 -03:00
Eugene Yudin
23389b8852 V4L/DVB (12589): Add support for RoverMedia TV Link Pro FM
This patch add support for RoverMedia TV Link Pro FM (LR138 REV:I) card
based on saa7134.

Signed-off-by: Eugene Yudin <Eugene.Yudin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:19:43 -03:00
Dmitri Belimov
2012c87f83 V4L/DVB (12587): Add support BeholdTV X7 card
Add support our new TV card based on xc5000 and saa7134.
Analog TV works well.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:19:42 -03:00
Vasiliy Temnikov
5a5e1da579 V4L/DVB (12574): support AverMedia Studio 505
Added support to AverMedia Studio 505

[dougsland@redhat.com: fixed rejects and removed the change to add dk as default secam variant]
[mchehab@redhat.com: fix a few CodingStyle issues]
Signed-off-by: Vasiliy Temnikov <vaka@newmail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:19:33 -03:00
hermann pitton
a138ebcf82 V4L/DVB (12492): saa7134-input: don't probe for the Pinnacle remotes anymore
With the recent improvements we don't need to probe anymore, if we know
the i2c address of the receiver.

The address of the receiver for the remote with the gray buttons is not
confirmed anywhere, but it is very unlikely to see it on something else.

We want to have that information anyway.

BTW, those remaining still probing, please join.

Signed-off-by: hermann pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:19:15 -03:00
Mauro Carvalho Chehab
dfb4ba1e13 V4L/DVB (12468): saa7134: Fix bad whitespacing
The changeset 0b17d0ed that aded ASUSTeK P7131 Analog were using
7 spaces instead of tab, probably due to some bad cut-and-paste.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:19:00 -03:00
Igor M. Liplianin
ecfcfec804 V4L/DVB (12463): Add support for Compro VideoMate S350 DVB-S PCI card.
Add Compro VideoMate S350 DVB-S driver.
The card uses zl10313, zl10039, saa7130 integrated circuits.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:18:57 -03:00
Jean Delvare
d9a88e632b V4L/DVB (11848): saa7134: Simplify handling of IR on AVerMedia Cardbus E506R
Now that we instantiate I2C IR devices explicitly, we can skip probing
altogether on boards where the I2C IR device address is known. The
AVerMedia Cardbus E506R is one of these boards.

Tested-by: Oldrich Jedlicka <oldium.pro@seznam.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:12 -03:00
Jean Delvare
ec218a412b V4L/DVB (11847): saa7134: Simplify handling of IR on MSI TV@nywhere Plus
Now that we instantiate I2C IR devices explicitly, we can skip probing
altogether on boards where the I2C IR device address is known. The MSI
TV@nywhere Plus is one of these boards.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:11 -03:00
Jean Delvare
4d7a2d6721 V4L/DVB (11845): ir-kbd-i2c: Use initialization data
For specific boards, pass initialization data to ir-kbd-i2c instead
of modifying the settings after the device is initialized. This is
more efficient and easier to read.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:11 -03:00
Jean Delvare
c668f32dca V4L/DVB (11844): ir-kbd-i2c: Switch to the new-style device binding model
Let card drivers probe for IR receiver devices and instantiate them if
found. Ultimately it would be better if we could stop probing
completely, but I suspect this won't be possible for all card types.

There's certainly room for cleanups. For example, some drivers are
sharing I2C adapter IDs, so they also had to share the list of I2C
addresses being probed for an IR receiver. Now that each driver
explicitly says which addresses should be probed, maybe some addresses
can be dropped from some drivers.

Also, the special cases in saa7134-i2c should probably be handled on a
per-board basis. This would be more efficient and less risky than always
probing extra addresses on all boards. I'll give it a try later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:11 -03:00
Jean Delvare
1df8e9861c V4L/DVB (11843): ir-kbd-i2c: Don't use i2c_client.name for our own needs
In the standard device driver binding model, the name field of
struct i2c_client is used to match devices to their drivers, so we
must stop using it for internal purposes. Define a separate field
in struct IR_i2c as a replacement, and use it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:11 -03:00
Dmitri Belimov
84d728c3df V4L/DVB (11604): saa7134: split Behold`s card entries to properly identify the model
Split Beholdr`s cards to correct models.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:42 -03:00
Andy Shevchenko
df0dbbe240 V4L/DVB (11442): saa7134: BZ#7524: Add AVerTV Studio 507UA support
[mchehab@redhat.com: Fix merge conflicts and CodingStyle issues]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:42 -03:00
Pham Thanh Nam
6a2d802ca0 V4L/DVB (10156): saa7134: Add support for Avermedia AVer TV GO 007 FM Plus
This patch adds support for Avermedia AVer TV GO 007 FM Plus (M15C) on
saa7134 driver (PCI ID 1461:f31d).

Signed-off-by: Pham Thanh Nam <phamthanhnam.ptn@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02 17:13:44 -02:00
Mauro Carvalho Chehab
26d5f3a3fe V4L/DVB (9772): saa7134: Add support for Kworld Plus TV Analog Lite PCI
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring
this
development.

Signed-off-by: Gilberto <gilberto@sistemafenix.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:38:17 -02:00
Brian Rogers
ba340b40a5 V4L/DVB (9168): Add support for MSI TV@nywhere Plus remote
The IR controller has a couple quirks. It won't respond until some other
device on the bus is probed. To work around that, probe 0x50 first.
Then, since it won't respond to a zero-byte read, probe with a one-byte
read.

Signed-off-by: Brian Rogers <brian_rogers@comcast.net>
[mchehab.redhat.com: Fix merge conflicts and remove an unused var]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13 09:57:34 -02:00
Mauro Carvalho Chehab
9b00019139 V4L/DVB (9061): saa7134: Add support for Real Audio 220
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring
this development.

Signed-off-by: Gilberto <gilberto@sistemafenix.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:37:10 -02:00
Mauro Carvalho Chehab
36f6bb97ca V4L/DVB (9060): saa7134: Add support for Avermedia PCI pure analog (M135A)
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring
this development.

Signed-off-by: Gilberto <gilberto@sistemafenix.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:37:10 -02:00
Mauro Carvalho Chehab
bf1ece6a4f V4L/DVB (9059): saa7134: Add support for Encore version 5.3 board
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring
this development.

Signed-off-by: Gilberto <gilberto@sistemafenix.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:37:10 -02:00
Mauro Carvalho Chehab
622ecb3003 V4L/DVB (8625): saa7134: Add NEC prococol IR decoding capability
This patch adds the capability of decoding NEC protocol, received via GPIO18 line.
This GPIO port can trigger saa7134 IRQ.

A future improvement would be to make it a little more generic to work also
with GPIO16 line.

A pure IRQ code didn't work, since some delays were introduced on the tests we
did.

A possible approach would be to use polling at a rate of 2.5 ms or less. If a
new code were taken, a code similar to nec_task() could be used. However, this
would add an extra overhead to kernel, and will consume more power.

Due to that, we took an hybrid approach: an IRQ upper half to trigger when a
new key is received and a bottom half to convert pulse-distance into a keycode.

The bottom half is polling based, to improve performance. During the bottom
half proccess, GPIO18 IRQ line is disabled, preventing IRQ reentrancy and
improving performance a little bit.

Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this
development.

Signed-off-by: Gilberto <gilberto@sistemafenix.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:36:47 -02:00
Mauro Carvalho Chehab
1c22dad8ab V4L/DVB (8395): saa7134: Fix Kbuild dependency of ir-kbd-i2c
Currently, saa7134 is dependent of ir-kbd-i2c, since it uses a symbol that is
defined there. However, as this symbol is used only on saa7134, there's no
sense on keeping it defined there (or on ir-commons).

So, let's move it to saa7134 and remove one symbol for being exported.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:29:03 -03:00
Hermann Pitton
0b17d0edbc V4L/DVB (8319): saa7134: Add support for analog only ASUSTeK P7131
saa7134: add a separate entry for the ASUSTeK P7131 analog only
         and do some eeprom detection to escape from the TVFM7135
         with the same PCI subsystem on auto detection.

Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:24:45 -03:00
Dmitry Belimov
878cf2a5d8 V4L/DVB (8021): Beholder's cards description
Split the Beholder M6 family to different models. Because M6 hasn`t RDS, M63
has chip with AC3 codec, M6 Extra has other type of HF module.
Add correct data for support MPEG encoder.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:09:08 -03:00
Tim Farrington
6e501a3f4a V4L/DVB (8048): saa7134: Fix entries for Avermedia A16d and Avermedia E506
Also, adds IR table for Avermedia A16d

Signed-off-by: Tim Farrington <timf@iinet.net.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26 15:58:52 -03:00
Igor Kuznetsov
025052716d V4L/DVB (7765): Add support for Beholder BeholdTV H6
Signed-off-by: Igor Kuznetsov <igk@igk.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29 18:41:36 -03:00
Dmitry Belimov
b34dddbe4b V4L/DVB (7677): saa7134: Add/fix Beholder entries
Beholder TV/FM tuners:

Changes:
     Add support Beholder Columbus PCMCIA card.
     Add key map for remote control of Beholder Columbus PCMCIA card.
     Fix gpiomask for all Beholder tuners.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:09:46 -03:00
Douglas Schilling Landgraf
ff699e6bd0 V4L/DVB (7094): static memory
- Static memory is always initialized with 0.
- Replaced in some cases C99 comments for /* */

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 13:42:20 -03:00
Adrian Pardini
f0ba356c85 V4L/DVB (7192): Adds support for Genius TVGo A11MCE
Signed-off-by: Adrian Pardini <pardo.bsso@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18 11:15:19 -03:00
Mauro Carvalho Chehab
616f8878bc V4L/DVB (6974): Fix codingStyle
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:40 -02:00
Andrey J. Melnikoff (TEMHOTA)
e8018c9e78 V4L/DVB (6973): Add Beholder TV 401/405/407/409/505/507/609/M6 support
This patch updates cardlist for Beholder TV tuners:
old models (with GPIO ir) 401, 403, 405, 407, 409, 505, 507
and add support for 607, 609, M6 cards with new i2c-ir.

Signed-off-by: Igor Kuznetsov <igk72@yandex.ru>
Signed-off-by: Andrey J. Melnikov <temnota@kmv.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:40 -02:00
Albert Graham
d2761f2271 V4L/DVB (6752): saa7134: Enable remote control support for Avermedia M102
This patch enabled the IR remote control for the Avermedia M102 (card=110),
which appears to be the same IR as the already supported device on the
Avermedia AVerTV GO 007 FM (card=57) model, the code is two one liners which
enable the IR for this device (subsystem: 1461:f31e)

Signed-off-by: Albert Graham <agraham@g-b.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:03:21 -02:00
Joe Perches
ac9bb7f516 V4L/DVB (6617): drivers/media/video: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:02:15 -02:00
Pedro
0938e3194a V4L/DVB (6379): patch which improves GotView Saa7135 remote control
improve GoTView PCI7135 remote control working under linux.

Acked-by: Hermann Pitton <hermann-pitton@arcor.de>
Acked-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: Eugene M. Roginskii <roginovicci@nm.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22 12:01:52 -02:00
Maxim Levitsky
c458473ebf V4L/DVB (6329): Additional Fixes for saa7134 suspend/resume
Fixes few more problems I found in my saa7134 resume code:

* Race between IRQ handler and .suspend()/.resume() functions

* Removes timeout timers on active buffers - those
	buffers will be recaptured after resume

* Adds suspend/resume for IR code - probably
	necessary if using polling mode

* Adds #ifdef CONFIG_PM overs suspend code

* Runs  a quirk in set_tvnorm in suspend/resume too

* Rearranges the order of calls in saa7134_resume to
	be exactly as in saa7134_initdev thus the card is
	initialized in exactly the same way

* Since DMA audio capture suspend/resume isn't yet supported,
	avoid re-enabling it on resume for now

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22 12:01:41 -02:00
Mauro Carvalho Chehab
9c12224a60 V4L/DVB (6079): Cleanup: remove linux/moduleparam.h from drivers/media files
Since at least kernel 2.6.12-rc2, module.h includes moduleparm.h. This
patch removes all occurences of moduleparm.h from drivers/media files.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:06:17 -03:00
James Le Cuirot
f5c965abdf V4L/DVB (5821): Saa7134: add remote control support for LifeView FlyDVB-S LR300
It has been confirmed that the FlyDVB IR codes currently in the kernel
work with the LifeView FlyDVB-S LR300. This one line addition adds it
to the list of supported cards.

Signed-off-by: James Le Cuirot <chewi@aura-online.co.uk>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:24:36 -03:00
Dmitry Torokhov
2c8a3a3355 V4L/DVB (5698): Input: drivers/media - switch to using input_dev->dev.parent
In preparation for struct class_device -> struct device input
core conversion switch to using input_dev->dev.parent when
specifying device position in sysfs tree.

Signed-off-by: Dmitry Torokhov <dtor at mail.ru>
Acked-by: Thierry Merle <thierry.merle@free.fr>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:23:46 -03:00
Dmitry Torokhov
b4ba788425 V4L/DVB (5682): SAA7134 - switch to use msecs_to_jiffies()
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:23:35 -03:00
Tony Wan
480f75acbc V4L/DVB (5647): Saa7134: enable ir-remote for 10moons TM300
Using Encore's key codes, we needn't add any additional key table.

Signed-off-by: Tony Wan <wankai@sjtu.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 14:23:21 -03:00
Ed Vipas
904ab884a2 V4L/DVB (5486): Add support for remote of Asustech P7131 Hybrid LNA
This patch just defines the remote control type.

Signed-off-by: Ed Vipas <epvipas@gmail.com>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 15:45:19 -03:00
Adrian Bunk
c408a6f673 V4L/DVB (5017): DVB: fix compile error
This patch fixes the following compile error:
<--  snip  -->
...
  LD      drivers/media/video/built-in.o
drivers/media/video/saa7134/built-in.o:(.data+0x85ec): multiple definition of `ir_rc5_remote_gap'
drivers/media/video/bt8xx/built-in.o:(.data+0x734c): first defined here
drivers/media/video/saa7134/built-in.o:(.data+0x85f0): multiple definition of `ir_rc5_key_timeout'
drivers/media/video/bt8xx/built-in.o:(.data+0x7350): first defined here
make[4]: *** [drivers/media/video/built-in.o] Error 1
<--  snip  -->
Since this variables were needlessly global, this patch implements the
trivial fix of making them static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:34:16 -02:00
Juan Pablo Sormani
c36c459a55 V4L/DVB (5015): Add support for more Encore TV cards
Signed-off-by: Juan Pablo Sormani <sorman@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:34:16 -02:00
Hermann Pitton
9160723ed6 V4L/DVB (4961): Add support for the ASUS P7131 remote control
Besides adding the board specific code, this patch moves
the RC5 decoding code from bt8xx to ir-functions.c to make it available 
for all drivers.

Signed-off-by: Marc Fargas <telenieko.telenieko.com>
Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:34:12 -02:00
Tim Schmielau
cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Thomas Genty
177aaaf826 V4L/DVB (4898): Saa7134: add support for remote control of Hauppauge HVR1110
This patch adds support for the remote control bundled with the
Hauppauge HVR1110

Signed-off-by: Thomas Genty <tomlohave@gmail.com>
Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10 09:05:29 -02:00