kernel-fxtec-pro1x/include/linux/platform_data
Linus Torvalds 154d6f18a4 This is the bulk of GPIO changes for v3.15:
- Merged in a branch of irqchip changes from Thomas
   Gleixner: we need to have new callbacks from the
   irqchip to determine if the GPIO line will be eligible
   for IRQs, and this callback must be able to say "no".
   After some thinking I got the branch from tglx and
   have switched all current users over to use this.
 
 - Based on tglx patches, we have added some generic
   irqchip helpers in the gpiolib core. These will
   help centralize code when GPIO drivers have simple
   chained/cascaded IRQs. Drivers will still define
   their irqchip vtables, but the gpiolib core will
   take care of irqdomain set-up, mapping from local
   offsets to Linux irqs, and reserve resources by
   marking the GPIO lines for IRQs.
 
 - Initially the PL061 and Nomadik GPIO/pin control
   drivers have been switched over to use the new
   gpiochip-to-irqchip infrastructure with more
   drivers expected for the next kernel cycle. The
   factoring of just two drivers still makes it worth
   it so it is already a win.
 
 - A new driver for the Synopsys DesignWare APB GPIO
   block.
 
 - Modify the DaVinci GPIO driver to be reusable also
   for the new TI Keystone architecture.
 
 - A new driver for the LSI ZEVIO SoCs.
 
 - Delete the obsolte tnetv107x driver.
 
 - Some incremental work on GPIO descriptors: have
   gpiod_direction_output() use a logical level,
   respecting assertion polarity through ACTIVE_LOW
   flags, adding gpiod_direction_output_raw() for the
   case where you want to set that very value. Add
   gpiochip_get_desc() to fetch a GPIO descriptor from
   a specific offset on a certain chip inside driver
   code.
 
 - Switch ACPI GPIO code over to using
   gpiochip_get_desc() and get rid of gpio_to_desc().
 
 - The ACPI GPIO event handling code has been reworked
   after encountering an actual real life implementation.
 
 - Support for ACPI GPIO operation regions.
 
 - Generic GPIO chips can now be assigned labels/names
   from platform data.
 
 - We now clamp values returned from GPIO drivers to
   the boolean [0,1] range.
 
 - Some improved documentation on how to use the polarity
   flag was added.
 
 - The a large slew of incremental driver updates and
   non-critical fixes. Some targeted for stable.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTPQnkAAoJEEEQszewGV1zyf4P/AmXV0O/FoyeQnXDxDsp7V/t
 JpfD0Gy8FlFmRxjG+UYutRCWUHxFQJU+j0ToVC4/N8clNS1LwA+ZwhNgB8dqRokz
 JVeeqUPn95z2kGe3j9DgVXWMRAytq7y8fXFuNUN36losceuxyOj4mYKLP9Yjnp9l
 4pS1TtQHF95a7qmnyYjGZy8VNcUz1gJ7wJrGxKI+Kl/8pcdA6rPqom6ozCXpZjaD
 5GGQoSvXKIn44+8qZeJsebd1YEso/8K66e9JomcGEsuZl78ArDOzoSllpYF2h/RM
 bo4BFUmoOL3/jVp7FFVbybfolwuRmQesY4NFqx03e+y++hxHFHl90FT+mnednS2Q
 k4lB0o1YRjf2tfMmm4cJ3tVBnFRhssTVb9ynDbzUw61mNVEuxP90f/njrHlObnPT
 1uVVWUE+4ojral213S2IYGHkg1OlWSn0DP6tEaswjOsGJrMdXpdxS5RPwcRtcByT
 HufZRNbUbLzXBzf4WeV2foSS3XqbXYcuMfdRBSWrbuJqW56robbdKKyvrMRPvh7j
 FV7SEK0yFPRe3nuzKM+t9TDGdUt4qivv/YfVeGfCnTVgFOac6cKrHG9gzM58mVcb
 4czG3B1TbqgfGVeZuew4qUdlHSmnSsS+pf/h9Yh9QCHqaKGh3R17cSDxIKAIVTIW
 pH6nuShTXsbrmRMeMhux
 =8Qqf
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull bulk of gpio updates from Linus Walleij:
 "A pretty big chunk of changes this time, but it has all been on
  rotation in linux-next and had some testing.  Of course there will be
  some amount of fixes on top...

   - Merged in a branch of irqchip changes from Thomas Gleixner: we need
     to have new callbacks from the irqchip to determine if the GPIO
     line will be eligible for IRQs, and this callback must be able to
     say "no".  After some thinking I got the branch from tglx and have
     switched all current users over to use this.

   - Based on tglx patches, we have added some generic irqchip helpers
     in the gpiolib core.  These will help centralize code when GPIO
     drivers have simple chained/cascaded IRQs.  Drivers will still
     define their irqchip vtables, but the gpiolib core will take care
     of irqdomain set-up, mapping from local offsets to Linux irqs, and
     reserve resources by marking the GPIO lines for IRQs.

   - Initially the PL061 and Nomadik GPIO/pin control drivers have been
     switched over to use the new gpiochip-to-irqchip infrastructure
     with more drivers expected for the next kernel cycle.  The
     factoring of just two drivers still makes it worth it so it is
     already a win.

   - A new driver for the Synopsys DesignWare APB GPIO block.

   - Modify the DaVinci GPIO driver to be reusable also for the new TI
     Keystone architecture.

   - A new driver for the LSI ZEVIO SoCs.

   - Delete the obsolte tnetv107x driver.

   - Some incremental work on GPIO descriptors: have
     gpiod_direction_output() use a logical level, respecting assertion
     polarity through ACTIVE_LOW flags, adding gpiod_direction_output_raw()
     for the case where you want to set that very value.  Add
     gpiochip_get_desc() to fetch a GPIO descriptor from a specific
     offset on a certain chip inside driver code.

   - Switch ACPI GPIO code over to using gpiochip_get_desc() and get rid
     of gpio_to_desc().

   - The ACPI GPIO event handling code has been reworked after
     encountering an actual real life implementation.

   - Support for ACPI GPIO operation regions.

   - Generic GPIO chips can now be assigned labels/names from platform
     data.

   - We now clamp values returned from GPIO drivers to the boolean [0,1]
     range.

   - Some improved documentation on how to use the polarity flag was
     added.

   - a large slew of incremental driver updates and non-critical fixes.
     Some targeted for stable"

* tag 'gpio-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits)
  gpio: rcar: Add helper variable dev = &pdev->dev
  gpio-lynxpoint: force gpio_get() to return "1" and "0" only
  gpio: unmap gpio irqs properly
  pch_gpio: set value before enabling output direction
  gpio: moxart: Actually set output state in moxart_gpio_direction_output()
  gpio: moxart: Avoid forward declaration
  gpio: mxs: Allow for recursive enable_irq_wake() call
  gpio: samsung: Add missing "break" statement
  gpio: twl4030: Remove redundant assignment
  gpio: dwapb: correct gpio-cells in binding document
  gpio: iop: fix devm_ioremap_resource() return value checking
  pinctrl: coh901: convert driver to use gpiolib irqchip
  pinctrl: nomadik: convert driver to use gpiolib irqchip
  gpio: pl061: convert driver to use gpiolib irqchip
  gpio: add IRQ chip helpers in gpiolib
  pinctrl: nomadik: factor in platform data container
  pinctrl: nomadik: rename secondary to latent
  gpio: Driver for SYSCON-based GPIOs
  gpio: generic: Use platform_device_id->driver_data field for driver flags
  pinctrl: coh901: move irq line locking to resource callbacks
  ...
2014-04-03 16:44:15 -07:00
..
ad5449.h iio:dac: Add support for the ad5449 2012-10-19 18:46:51 +01:00
ad5755.h
ad7266.h
ad7298.h staging:iio: Move the ad7298 driver out of staging 2012-11-19 22:22:15 +00:00
ad7303.h iio:dac: Add support for the AD7303 2013-06-11 20:25:58 +01:00
ad7791.h
ad7793.h staging:iio: Move ad7793 driver out of staging 2012-11-30 12:57:08 +00:00
ad7887.h staging:iio: Move the ad7887 driver out of staging 2012-11-05 20:39:54 +00:00
adau1977.h ASoC: Add ADAU1977 CODEC driver 2014-02-19 13:36:15 +09:00
ads7828.h hwmon: (ads7828) driver cleanup 2012-12-05 10:55:54 -08:00
arm-ux500-pm.h ARM: ux500: move PM-related PRCMU functions to machine 2013-04-08 13:57:53 +02:00
asoc-imx-ssi.h ARM: imx: remove header file mach/irqs.h 2012-10-15 10:05:43 +08:00
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c.h ASoC: samsung: Remove invalid file reference 2014-02-25 21:29:26 +09:00
asoc-s3c24xx_simtec.h ASoC: s3c24xx: Remove invalid file reference 2014-02-25 21:29:31 +09:00
asoc-ti-mcbsp.h ASoC: mcbsp: Trivial cleanup in asoc-ti-mcbsp.h 2013-12-30 11:50:16 +00:00
asoc-ux500-msp.h ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion 2014-01-07 15:36:09 +00:00
at24.h misc: (at24) move header to linux/platform_data/ 2013-09-30 06:02:34 +02:00
at91_adc.h iio: at91: Use different prescal, startup mask in MR for different IP 2013-08-29 21:49:28 +01:00
ata-pxa.h
ata-samsung_cf.h ata: ata-samsung_cf: cleanup in header file 2014-02-19 14:52:52 +01:00
atmel.h mtd: atmel_nand: add a new dt binding item for nand dma support 2013-08-05 20:56:15 +01:00
bd6107.h backlight: Add ROHM BD6107 backlight driver 2013-07-16 13:01:19 +09:00
brcmfmac-sdio.h brcmfmac: abstract tx packet processing functions 2013-08-15 16:07:55 -04:00
bt-nokia-h4p.h staging/bluetooth: Add hci_h4p driver 2014-02-07 10:13:53 -08:00
camera-mx1.h
camera-mx2.h
camera-mx3.h [media] V4L2: mx3_camera: add support for asynchronous subdevice registration 2013-08-18 09:06:37 -03:00
camera-pxa.h
camera-rcar.h [media] V4L2: soc_camera: Renesas R-Car VIN driver 2013-08-18 09:01:10 -03:00
clk-integrator.h clk: move IM-PD1 clocks to drivers/clk 2012-11-21 11:02:44 -08:00
clk-lpss.h ACPI / LPSS: register clock device for Lynxpoint DMA properly 2013-05-14 10:23:58 +05:30
clk-realview.h
clk-u300.h
clk-ux500.h clk: ux500: Copy u8500_clk_init() ready for DT enablement 2013-09-26 11:05:26 +02:00
coda.h media: coda: use genalloc API 2013-04-29 18:28:13 -07:00
crypto-atmel.h ARM: AT91SAM9G45: same platform data structure for all crypto peripherals 2013-03-10 16:46:41 +08:00
crypto-ux500.h ARM: plat-nomadik: move DMA40 header to <linux/platform_data> 2012-11-05 09:55:32 +01:00
cyttsp4.h Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices 2013-06-30 21:24:21 -07:00
davinci_asp.h ASoC: davinci-mcasp: Rename platform data struct 2014-02-03 18:26:59 +00:00
db8500_thermal.h Thermal: Add ST-Ericsson DB8500 thermal driver. 2012-11-15 20:50:34 +08:00
dma-atmel.h dmaengine: at_hdmac: extend hardware handshaking interface identification 2013-07-05 11:40:29 +05:30
dma-coh901318.h dma: coh901318: create a proper platform data file 2013-01-07 17:35:57 +01:00
dma-ep93xx.h
dma-imx-sdma.h dma: imx-sdma: Add sdma firmware version 2 support 2013-12-16 09:18:47 +05:30
dma-imx.h dma: imx-sdma: Add new dma type for ssi dual fifo script 2013-12-16 09:18:48 +05:30
dma-mmp_tdma.h dma: Cleanup dma-mmp_tdma.h header 2014-01-13 13:30:30 +05:30
dma-mv_xor.h dma: mv_xor: Cleanup in dma-mv_xor.h header 2014-01-13 13:30:31 +05:30
dma-rcar-hpbdma.h dma: add driver for R-Car HPB-DMAC 2013-09-02 17:35:55 +05:30
dma-s3c24xx.h ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 2013-10-21 05:32:48 +09:00
dma-ste-dma40.h dmaengine: ste_dma40: Allow memcpy channels to be configured from DT 2013-06-04 11:12:11 +02:00
dmtimer-omap.h ARM: OMAP: Add platform data header for DMTIMERs 2012-11-16 10:35:08 -06:00
dsp-omap.h
dwc3-exynos.h
dwc3-omap.h usb: dwc3: omap: remove platform data associated with dwc3-omap 2013-03-18 11:16:38 +02:00
edma.h dmanengine: fix edma driver to not define DMA_COMPLETE 2013-10-30 18:27:56 +05:30
efm32-spi.h spi: new controller driver for efm32 SoCs 2013-08-09 17:32:57 +01:00
efm32-uart.h
ehci-sh.h
elm.h mtd: devices: elm: check for device's presence before configuration 2013-04-05 12:57:18 +01:00
emif_plat.h memory: emif: Handle devices which are not rated for >85C 2013-03-25 13:18:12 -07:00
eth-netx.h net: Cleanup in eth-netx.h 2014-01-02 03:30:35 -05:00
fsa9480.h
g762.h Add support for GMT G762/G763 PWM fan controllers 2013-06-27 10:31:42 -07:00
gpio-davinci.h gpio: remove obsolete tnetv107x driver 2014-03-05 10:44:44 +08:00
gpio-em.h gpio: em: Add pinctrl support 2013-07-21 17:24:41 +02:00
gpio-lpc32xx.h ARM: lpc32xx: move custom GPIO header 2013-12-03 11:26:06 +01:00
gpio-omap.h ARM: OMAP: Remove NEED_MACH_GPIO_H 2012-11-02 12:00:36 -07:00
gpio-rcar.h gpio-rcar: Add RCAR_GP_PIN macro 2013-06-04 21:03:56 +09:00
gpio-ts5500.h gpio: add TS-5500 DIO blocks support 2012-12-10 11:23:25 +01:00
gpio_backlight.h backlight: Add GPIO-based backlight driver 2013-07-16 13:01:05 +09:00
hwmon-s3c.h hwmon: (s3c) Trivial cleanup in hwmon-s3c.h 2014-01-14 21:36:52 -08:00
i2c-cbus-gpio.h i2c: i2c-cbus-gpio: introduce driver 2012-11-19 09:57:16 +01:00
i2c-davinci.h
i2c-imx.h
i2c-nuc900.h
i2c-s3c2410.h ARM: s3c: i2c: add platform_device forward declaration 2013-02-14 15:04:40 +01:00
ina2xx.h
invensense_mpu6050.h Invensense MPU6050 Device Driver. 2013-02-10 17:42:43 +00:00
iommu-omap.h iommu/omap: Adapt to runtime pm 2012-12-03 18:48:23 +01:00
irda-pxaficp.h
irq-renesas-intc-irqpin.h irqchip: intc-irqpin: GPL header for platform data 2013-03-18 21:26:06 +09:00
irq-renesas-irqc.h irqchip: Renesas IRQC driver 2013-03-18 21:26:06 +09:00
keyboard-pxa930_rotary.h
keyboard-spear.h
keypad-ep93xx.h Input: keypad-ep93xx - cleanup header file 2013-12-27 17:20:21 -08:00
keypad-nomadik-ske.h
keypad-omap.h Input: keypad-omap - cleanup header file 2013-12-27 17:20:22 -08:00
keypad-pxa27x.h Input: pxa27x-keypad - use matrix_keymap for matrix keys 2013-06-18 22:56:51 -07:00
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h leds: kirkwood: Cleanup in header files 2014-01-27 17:28:51 -08:00
leds-kirkwood-ns2.h leds: kirkwood: Cleanup in header files 2014-01-27 17:28:51 -08:00
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h leds: lp55xx: handle enable pin in driver 2013-10-25 10:13:25 -07:00
leds-omap.h ARM: OMAP: Move plat/led.h to include/linux/platform_data 2012-10-17 12:03:18 -07:00
leds-pca963x.h leds-pca9633: Rename to leds-pca963x 2013-08-26 17:22:14 -07:00
leds-pca9685.h leds: Added driver for the NXP PCA9685 I2C chip 2013-10-22 10:57:35 -07:00
leds-s3c24xx.h
lm3630a_bl.h backlight: lm3630: apply chip revision 2013-11-13 12:09:15 +09:00
lm3639_bl.h backlight: add new lm3639 backlight driver 2012-10-06 03:04:53 +09:00
lp855x.h backlight: lp855x_bl: support new LP8555 device 2013-11-13 12:09:14 +09:00
lp8727.h
lp8755.h regulator: lp8755: new driver for LP8755 2012-12-24 16:32:34 +00:00
lv5207lp.h backlight: Add Sanyo LV5207LP backlight driver 2013-07-16 13:01:10 +09:00
macb.h net/at91_ether: add pdata flag for reverse Eth addr 2012-10-23 02:40:10 -04:00
mailbox-omap.h ARM: OMAP2+: add user and fifo info to mailbox platform data 2013-06-11 11:41:30 -05:00
max197.h hwmon: (max197) add include guard 2014-01-14 21:36:53 -08:00
max6697.h hwmon: Driver for Maxim MAX6697 and compatibles 2013-02-06 09:57:56 -08:00
mfd-mcp-sa11x0.h mfd: Cleanup mfd-mcp-sa11x0.h header 2014-01-21 08:28:59 +00:00
microread.h NFC: Initial support for Inside Secure microread 2013-02-03 20:37:42 +01:00
mipi-csis.h exynos4-is: Use the generic MIPI CSIS PHY driver 2013-10-16 13:48:08 -07:00
mmc-davinci.h ARM: davinci: mmc: derive version information from device name 2013-04-03 09:42:16 +05:30
mmc-esdhc-imx.h mmc: sdhci-esdhc-imx: add delay line setting support 2013-10-21 15:58:13 -04:00
mmc-msm_sdcc.h
mmc-mvsdio.h
mmc-mxcmmc.h
mmc-omap.h ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
mmc-pxamci.h ARM: pxa: propagate errors from regulator_enable() to pxamci 2013-07-23 12:15:15 -07:00
mmc-s3cmci.h
mmc-sdhci-s3c.h mmc: sdhci-s3c: remove platform dependencies 2013-04-19 13:51:23 +02:00
mmp_audio.h
mmp_dma.h
mouse-pxa930_trkball.h
msm_serial_hs.h
mtd-davinci-aemif.h
mtd-davinci.h
mtd-mxc_nand.h
mtd-nand-omap2.h mtd: omap2: Cleanup header files 2014-01-11 11:39:18 -08:00
mtd-nand-pxa3xx.h mtd: nand: pxa3xx: Add bad block handling 2014-01-03 11:22:12 -08:00
mtd-nand-s3c2410.h
mtd-onenand-omap2.h mtd: omap2: Cleanup header files 2014-01-11 11:39:18 -08:00
mtd-orion_nand.h mtd: orion: Cleanup mtd-orion_nand.h header 2014-01-11 11:39:23 -08:00
mv_usb.h usb: mv_usb: remove clock name from pdata 2013-04-02 11:42:47 +03:00
net-cw1200.h cw1200: rename the cw1200 platform definition header 2013-06-03 15:54:56 -04:00
ntc_thermistor.h hwmon: Fix CamelCase checkpatch warnings 2013-04-07 21:16:40 -07:00
omap-twl4030.h ASoC: omap-twl4030: Update the header file to support more boards 2012-12-07 12:54:31 +09:00
omap-wd-timer.h ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer 2012-10-29 20:49:44 -06:00
omap1_bl.h
omap4-keypad.h
omap_drm.h staging: drm/omap: add support for ARCH_MULTIPLATFORM 2012-10-30 11:10:00 -07:00
pca953x.h gpio: (gpio-pca953x) move header to linux/platform_data/ 2013-08-29 12:33:52 -07:00
pcmcia-pxa2xx_viper.h
pinctrl-adi2.h pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. 2013-09-19 14:37:27 +02:00
pinctrl-single.h pinctrl: single: Add support for auxdata 2013-10-10 15:30:47 -07:00
pn544.h nfc: Fix FSF address in file headers 2013-12-11 10:56:21 -05:00
pwm-renesas-tpu.h pwm: Add Renesas TPU PWM driver 2013-06-21 11:33:28 +02:00
pxa2xx_udc.h ARM: move udc_pxa2xx.h to linux/platform_data 2012-11-16 11:35:30 +00:00
pxa_sdhci.h mmc: sdhci-pxav3: add quirks2 2012-12-06 13:54:51 -05:00
rcar-du.h drm/rcar-du: Rework output routing support 2013-08-09 23:17:52 +02:00
remoteproc-omap.h remoteproc/omap: fix a sparse warning 2013-07-01 15:30:51 +03:00
s3c-hsotg.h ARM defconfigs: add missing inclusions of linux/platform_device.h 2013-02-14 15:14:32 -08:00
s3c-hsudc.h
sa11x0-serial.h ARM: move serial_sa1100.h header file to linux/platform_data 2012-11-16 11:35:29 +00:00
samsung-usbphy.h usb: phy: samsung: Introducing usb phy driver for hsotg 2013-01-18 15:06:30 +02:00
sc18is602.h
serial-imx.h serial: imx: Remove init() and exit() platform callbacks 2014-02-28 16:36:45 -08:00
serial-omap.h SERIAL: OMAP: Remove the slave idle handling from the driver 2013-05-19 16:37:08 -06:00
serial-sccnxp.h Revert "serial: sccnxp: Add DT support" 2013-08-02 15:25:19 +08:00
sh_ipmmu.h iommu/shmobile: Add iommu driver for Renesas IPMMU modules 2013-02-06 10:57:25 +01:00
shmob_drm.h
sht15.h hwmon: (sht15) add include guard 2014-01-14 21:36:53 -08:00
si5351.h clk: si5351: remove variant from platform_data 2014-01-27 11:20:22 -08:00
simplefb.h fbdev changes for 3.12: 2013-09-05 09:49:32 -07:00
spi-clps711x.h spi/clps711x: New SPI master driver 2012-12-05 23:14:38 +00:00
spi-davinci.h ARM: davinci: move private EDMA API to arm/common 2013-06-18 10:52:03 +05:30
spi-ep93xx.h
spi-imx.h
spi-nuc900.h spi: nuc900: Cleanup spi-nuc900.h header 2013-12-30 12:46:20 +00:00
spi-omap2-mcspi.h spi: spi-omap2-mcspi.c: Toggle CS after each word 2013-01-26 17:00:04 +08:00
spi-s3c64xx.h spi/s3c64xx: Trivial cleanup in header file 2014-02-16 09:59:13 +08:00
ssm2518.h ASoC: Add ssm2518 support 2013-05-25 10:33:30 -04:00
st1232_pdata.h Input: st1232 - add reset pin handling 2013-04-15 10:00:44 -07:00
st_sensors_pdata.h iio: Added ST-sensors platform data to select the DRDY interrupt pin 2013-08-03 18:40:28 +01:00
tegra_emc.h
touchscreen-s3c2410.h
tsl2563.h iio:light:tsl2563 move out of staging 2013-01-27 17:37:24 +00:00
uio_dmem_genirq.h Add new uio device for dynamic memory allocation 2012-10-24 15:39:08 -07:00
uio_pruss.h uio: uio_pruss: replace private SRAM API with genalloc 2012-10-27 16:28:32 +05:30
usb-davinci.h
usb-ehci-mxc.h
usb-ehci-orion.h usb: ehci: Cleanup usb-ehci-orion.h header 2014-01-03 12:37:57 -08:00
usb-imx_udc.h
usb-musb-ux500.h usb: musb: ux500: move channel number knowledge into the driver 2013-06-04 11:12:02 +02:00
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap.h mfd: omap-usb-host: override number of ports from platform data 2013-02-13 13:22:49 +02:00
usb-omap1.h usb: omap1: add extcon to platform data 2013-12-06 14:36:37 -06:00
usb-pxa3xx-ulpi.h
usb-rcar-gen2-phy.h usb: phy: Add RCAR Gen2 USB phy 2013-10-10 11:59:48 -05:00
usb-rcar-phy.h phy-rcar-usb: add R8A7778 support 2013-06-11 16:11:16 +09:00
usb-s3c2410_udc.h
usb3503.h usb: misc: usb3503: Add to select the ports to disable 2013-05-30 21:32:52 +09:00
ux500_wdt.h watchdog: Add support for ux500_wdt watchdog 2013-02-14 00:22:53 +01:00
video-ep93xx.h video: ep93xx: Cleanup video-ep93xx.h header 2014-01-17 10:57:41 +02:00
video-imxfb.h
video-msm_fb.h video: msm: Cleanup video-msm_fb.h header 2014-01-17 10:57:42 +02:00
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h video: pxa: Cleanup video-pxafb.h header 2014-01-17 10:57:42 +02:00
video_s3c.h video/s3c: move platform_data out of arch/arm 2013-04-11 14:49:20 +03:00
voltage-omap.h
vsp1.h [media] v4l: vsp1: Add LUT support 2013-12-11 09:25:20 -02:00
wiznet.h
zforce_ts.h Input: add driver for Neonode zForce based touchscreens 2013-10-31 08:46:08 -07:00