Commit graph

335369 commits

Author SHA1 Message Date
Mihai Caraman
ff59474684 KVM: PPC: bookehv: Remove GET_VCPU macro from exception handler
GET_VCPU define will not be implemented for 64-bit for performance reasons
so get rid of it also on 32-bit.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:10 +01:00
Mihai Caraman
b50df19ccc KVM: PPC: booke: Fix get_tb() compile error on 64-bit
Include header file for get_tb() declaration.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:09 +01:00
Mihai Caraman
910040b82d KVM: PPC: e500: Silence bogus GCC warning in tlb code
64-bit GCC 4.5.1 warns about an uninitialized variable which was guarded
by a flag. Initialize the variable to make it happy.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
[agraf: reword comment]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:08 +01:00
Paul Mackerras
b4072df407 KVM: PPC: Book3S HV: Handle guest-caused machine checks on POWER7 without panicking
Currently, if a machine check interrupt happens while we are in the
guest, we exit the guest and call the host's machine check handler,
which tends to cause the host to panic.  Some machine checks can be
triggered by the guest; for example, if the guest creates two entries
in the SLB that map the same effective address, and then accesses that
effective address, the CPU will take a machine check interrupt.

To handle this better, when a machine check happens inside the guest,
we call a new function, kvmppc_realmode_machine_check(), while still in
real mode before exiting the guest.  On POWER7, it handles the cases
that the guest can trigger, either by flushing and reloading the SLB,
or by flushing the TLB, and then it delivers the machine check interrupt
directly to the guest without going back to the host.  On POWER7, the
OPAL firmware patches the machine check interrupt vector so that it
gets control first, and it leaves behind its analysis of the situation
in a structure pointed to by the opal_mc_evt field of the paca.  The
kvmppc_realmode_machine_check() function looks at this, and if OPAL
reports that there was no error, or that it has handled the error, we
also go straight back to the guest with a machine check.  We have to
deliver a machine check to the guest since the machine check interrupt
might have trashed valid values in SRR0/1.

If the machine check is one we can't handle in real mode, and one that
OPAL hasn't already handled, or on PPC970, we exit the guest and call
the host's machine check handler.  We do this by jumping to the
machine_check_fwnmi label, rather than absolute address 0x200, because
we don't want to re-execute OPAL's handler on POWER7.  On PPC970, the
two are equivalent because address 0x200 just contains a branch.

Then, if the host machine check handler decides that the system can
continue executing, kvmppc_handle_exit() delivers a machine check
interrupt to the guest -- once again to let the guest know that SRR0/1
have been modified.

Signed-off-by: Paul Mackerras <paulus@samba.org>
[agraf: fix checkpatch warnings]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:07 +01:00
Paul Mackerras
1b400ba0cd KVM: PPC: Book3S HV: Improve handling of local vs. global TLB invalidations
When we change or remove a HPT (hashed page table) entry, we can do
either a global TLB invalidation (tlbie) that works across the whole
machine, or a local invalidation (tlbiel) that only affects this core.
Currently we do local invalidations if the VM has only one vcpu or if
the guest requests it with the H_LOCAL flag, though the guest Linux
kernel currently doesn't ever use H_LOCAL.  Then, to cope with the
possibility that vcpus moving around to different physical cores might
expose stale TLB entries, there is some code in kvmppc_hv_entry to
flush the whole TLB of entries for this VM if either this vcpu is now
running on a different physical core from where it last ran, or if this
physical core last ran a different vcpu.

There are a number of problems on POWER7 with this as it stands:

- The TLB invalidation is done per thread, whereas it only needs to be
  done per core, since the TLB is shared between the threads.
- With the possibility of the host paging out guest pages, the use of
  H_LOCAL by an SMP guest is dangerous since the guest could possibly
  retain and use a stale TLB entry pointing to a page that had been
  removed from the guest.
- The TLB invalidations that we do when a vcpu moves from one physical
  core to another are unnecessary in the case of an SMP guest that isn't
  using H_LOCAL.
- The optimization of using local invalidations rather than global should
  apply to guests with one virtual core, not just one vcpu.

(None of this applies on PPC970, since there we always have to
invalidate the whole TLB when entering and leaving the guest, and we
can't support paging out guest memory.)

To fix these problems and simplify the code, we now maintain a simple
cpumask of which cpus need to flush the TLB on entry to the guest.
(This is indexed by cpu, though we only ever use the bits for thread
0 of each core.)  Whenever we do a local TLB invalidation, we set the
bits for every cpu except the bit for thread 0 of the core that we're
currently running on.  Whenever we enter a guest, we test and clear the
bit for our core, and flush the TLB if it was set.

On initial startup of the VM, and when resetting the HPT, we set all the
bits in the need_tlb_flush cpumask, since any core could potentially have
stale TLB entries from the previous VM to use the same LPID, or the
previous contents of the HPT.

Then, we maintain a count of the number of online virtual cores, and use
that when deciding whether to use a local invalidation rather than the
number of online vcpus.  The code to make that decision is extracted out
into a new function, global_invalidates().  For multi-core guests on
POWER7 (i.e. when we are using mmu notifiers), we now never do local
invalidations regardless of the H_LOCAL flag.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:05 +01:00
Michael Ellerman
6a7f972dfe MAINTAINERS: Add git tree link for PPC KVM
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:04 +01:00
Paul Mackerras
3a2e7b0d76 KVM: PPC: Book3S PR: MSR_DE doesn't exist on Book 3S
The mask of MSR bits that get transferred from the guest MSR to the
shadow MSR included MSR_DE.  In fact that bit only exists on Book 3E
processors, and it is assigned the same bit used for MSR_BE on Book 3S
processors.  Since we already had MSR_BE in the mask, this just removes
MSR_DE.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:03 +01:00
Paul Mackerras
28c483b62f KVM: PPC: Book3S PR: Fix VSX handling
This fixes various issues in how we were handling the VSX registers
that exist on POWER7 machines.  First, we were running off the end
of the current->thread.fpr[] array.  Ultimately this was because the
vcpu->arch.vsr[] array is sized to be able to store both the FP
registers and the extra VSX registers (i.e. 64 entries), but PR KVM
only uses it for the extra VSX registers (i.e. 32 entries).

Secondly, calling load_up_vsx() from C code is a really bad idea,
because it jumps to fast_exception_return at the end, rather than
returning with a blr instruction.  This was causing it to jump off
to a random location with random register contents, since it was using
the largely uninitialized stack frame created by kvmppc_load_up_vsx.

In fact, it isn't necessary to call either __giveup_vsx or load_up_vsx,
since giveup_fpu and load_up_fpu handle the extra VSX registers as well
as the standard FP registers on machines with VSX.  Also, since VSX
instructions can access the VMX registers and the FP registers as well
as the extra VSX registers, we have to load up the FP and VMX registers
before we can turn on the MSR_VSX bit for the guest.  Conversely, if
we save away any of the VSX or FP registers, we have to turn off MSR_VSX
for the guest.

To handle all this, it is more convenient for a single call to
kvmppc_giveup_ext() to handle all the state saving that needs to be done,
so we make it take a set of MSR bits rather than just one, and the switch
statement becomes a series of if statements.  Similarly kvmppc_handle_ext
needs to be able to load up more than one set of registers.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:02 +01:00
Paul Mackerras
b0a94d4e23 KVM: PPC: Book3S PR: Emulate PURR, SPURR and DSCR registers
This adds basic emulation of the PURR and SPURR registers.  We assume
we are emulating a single-threaded core, so these advance at the same
rate as the timebase.  A Linux kernel running on a POWER7 expects to
be able to access these registers and is not prepared to handle a
program interrupt on accessing them.

This also adds a very minimal emulation of the DSCR (data stream
control register).  Writes are ignored and reads return zero.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:01 +01:00
Paul Mackerras
1cc8ed0b13 KVM: PPC: Book3S HV: Don't give the guest RW access to RO pages
Currently, if the guest does an H_PROTECT hcall requesting that the
permissions on a HPT entry be changed to allow writing, we make the
requested change even if the page is marked read-only in the host
Linux page tables.  This is a problem since it would for instance
allow a guest to modify a page that KSM has decided can be shared
between multiple guests.

To fix this, if the new permissions for the page allow writing, we need
to look up the memslot for the page, work out the host virtual address,
and look up the Linux page tables to get the PTE for the page.  If that
PTE is read-only, we reduce the HPTE permissions to read-only.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:00 +01:00
Paul Mackerras
05dd85f793 KVM: PPC: Book3S HV: Report correct HPT entry index when reading HPT
This fixes a bug in the code which allows userspace to read out the
contents of the guest's hashed page table (HPT).  On the second and
subsequent passes through the HPT, when we are reporting only those
entries that have changed, we were incorrectly initializing the index
field of the header with the index of the first entry we skipped
rather than the first changed entry.  This fixes it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:33:59 +01:00
Paul Mackerras
a64fd70748 KVM: PPC: Book3S HV: Reset reverse-map chains when resetting the HPT
With HV-style KVM, we maintain reverse-mapping lists that enable us to
find all the HPT (hashed page table) entries that reference each guest
physical page, with the heads of the lists in the memslot->arch.rmap
arrays.  When we reset the HPT (i.e. when we reboot the VM), we clear
out all the HPT entries but we were not clearing out the reverse
mapping lists.  The result is that as we create new HPT entries, the
lists get corrupted, which can easily lead to loops, resulting in the
host kernel hanging when it tries to traverse those lists.

This fixes the problem by zeroing out all the reverse mapping lists
when we zero out the HPT.  This incidentally means that we are also
zeroing our record of the referenced and changed bits (not the bits
in the Linux PTEs, used by the Linux MM subsystem, but the bits used
by the KVM_GET_DIRTY_LOG ioctl, and those used by kvm_age_hva() and
kvm_test_age_hva()).

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:33:58 +01:00
Paul Mackerras
a2932923cc KVM: PPC: Book3S HV: Provide a method for userspace to read and write the HPT
A new ioctl, KVM_PPC_GET_HTAB_FD, returns a file descriptor.  Reads on
this fd return the contents of the HPT (hashed page table), writes
create and/or remove entries in the HPT.  There is a new capability,
KVM_CAP_PPC_HTAB_FD, to indicate the presence of the ioctl.  The ioctl
takes an argument structure with the index of the first HPT entry to
read out and a set of flags.  The flags indicate whether the user is
intending to read or write the HPT, and whether to return all entries
or only the "bolted" entries (those with the bolted bit, 0x10, set in
the first doubleword).

This is intended for use in implementing qemu's savevm/loadvm and for
live migration.  Therefore, on reads, the first pass returns information
about all HPTEs (or all bolted HPTEs).  When the first pass reaches the
end of the HPT, it returns from the read.  Subsequent reads only return
information about HPTEs that have changed since they were last read.
A read that finds no changed HPTEs in the HPT following where the last
read finished will return 0 bytes.

The format of the data provides a simple run-length compression of the
invalid entries.  Each block of data starts with a header that indicates
the index (position in the HPT, which is just an array), the number of
valid entries starting at that index (may be zero), and the number of
invalid entries following those valid entries.  The valid entries, 16
bytes each, follow the header.  The invalid entries are not explicitly
represented.

Signed-off-by: Paul Mackerras <paulus@samba.org>
[agraf: fix documentation]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:33:57 +01:00
Paul Mackerras
6b445ad4f8 KVM: PPC: Book3S HV: Make a HPTE removal function available
This makes a HPTE removal function, kvmppc_do_h_remove(), available
outside book3s_hv_rm_mmu.c.  This will be used by the HPT writing
code.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:33:55 +01:00
Paul Mackerras
44e5f6be62 KVM: PPC: Book3S HV: Add a mechanism for recording modified HPTEs
This uses a bit in our record of the guest view of the HPTE to record
when the HPTE gets modified.  We use a reserved bit for this, and ensure
that this bit is always cleared in HPTE values returned to the guest.

The recording of modified HPTEs is only done if other code indicates
its interest by setting kvm->arch.hpte_mod_interest to a non-zero value.
The reason for this is that when later commits add facilities for
userspace to read the HPT, the first pass of reading the HPT will be
quicker if there are no (or very few) HPTEs marked as modified,
rather than having most HPTEs marked as modified.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:33:54 +01:00
Paul Mackerras
4879f24172 KVM: PPC: Book3S HV: Fix bug causing loss of page dirty state
This fixes a bug where adding a new guest HPT entry via the H_ENTER
hcall would lose the "changed" bit in the reverse map information
for the guest physical page being mapped.  The result was that the
KVM_GET_DIRTY_LOG could return a zero bit for the page even though
the page had been modified by the guest.

This fixes it by only modifying the index and present bits in the
reverse map entry, thus preserving the reference and change bits.
We were also unnecessarily setting the reference bit, and this
fixes that too.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:33:53 +01:00
Paul Mackerras
7ed661bf85 KVM: PPC: Book3S HV: Restructure HPT entry creation code
This restructures the code that creates HPT (hashed page table)
entries so that it can be called in situations where we don't have a
struct vcpu pointer, only a struct kvm pointer.  It also fixes a bug
where kvmppc_map_vrma() would corrupt the guest R4 value.

Most of the work of kvmppc_virtmode_h_enter is now done by a new
function, kvmppc_virtmode_do_h_enter, which itself calls another new
function, kvmppc_do_h_enter, which contains most of the old
kvmppc_h_enter.  The new kvmppc_do_h_enter takes explicit arguments
for the place to return the HPTE index, the Linux page tables to use,
and whether it is being called in real mode, thus removing the need
for it to have the vcpu as an argument.

Currently kvmppc_map_vrma creates the VRMA (virtual real mode area)
HPTEs by calling kvmppc_virtmode_h_enter, which is designed primarily
to handle H_ENTER hcalls from the guest that need to pin a page of
memory.  Since H_ENTER returns the index of the created HPTE in R4,
kvmppc_virtmode_h_enter updates the guest R4, corrupting the guest R4
in the case when it gets called from kvmppc_map_vrma on the first
VCPU_RUN ioctl.  With this, kvmppc_map_vrma instead calls
kvmppc_virtmode_do_h_enter with the address of a dummy word as the
place to store the HPTE index, thus avoiding corrupting the guest R4.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:33:52 +01:00
Alexander Graf
0e673fb679 KVM: PPC: Support eventfd
In order to support the generic eventfd infrastructure on PPC, we need
to call into the generic KVM in-kernel device mmio code.

Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:33:50 +01:00
Alexander Graf
914daba865 KVM: Distangle eventfd code from irqchip
The current eventfd code assumes that when we have eventfd, we also have
irqfd for in-kernel interrupt delivery. This is not necessarily true. On
PPC we don't have an in-kernel irqchip yet, but we can still support easily
support eventfd.

Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:33:49 +01:00
Jan Kiszka
45e3cc7d9f KVM: x86: Fix uninitialized return code
This is a regression caused by 18595411a7.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2012-12-02 17:37:04 +02:00
Will Auld
ba904635d4 KVM: x86: Emulate IA32_TSC_ADJUST MSR
CPUID.7.0.EBX[1]=1 indicates IA32_TSC_ADJUST MSR 0x3b is supported

Basic design is to emulate the MSR by allowing reads and writes to a guest
vcpu specific location to store the value of the emulated MSR while adding
the value to the vmcs tsc_offset. In this way the IA32_TSC_ADJUST value will
be included in all reads to the TSC MSR whether through rdmsr or rdtsc. This
is of course as long as the "use TSC counter offsetting" VM-execution control
is enabled as well as the IA32_TSC_ADJUST control.

However, because hardware will only return the TSC + IA32_TSC_ADJUST +
vmsc tsc_offset for a guest process when it does and rdtsc (with the correct
settings) the value of our virtualized IA32_TSC_ADJUST must be stored in one
of these three locations. The argument against storing it in the actual MSR
is performance. This is likely to be seldom used while the save/restore is
required on every transition. IA32_TSC_ADJUST was created as a way to solve
some issues with writing TSC itself so that is not an option either.

The remaining option, defined above as our solution has the problem of
returning incorrect vmcs tsc_offset values (unless we intercept and fix, not
done here) as mentioned above. However, more problematic is that storing the
data in vmcs tsc_offset will have a different semantic effect on the system
than does using the actual MSR. This is illustrated in the following example:

The hypervisor set the IA32_TSC_ADJUST, then the guest sets it and a guest
process performs a rdtsc. In this case the guest process will get
TSC + IA32_TSC_ADJUST_hyperviser + vmsc tsc_offset including
IA32_TSC_ADJUST_guest. While the total system semantics changed the semantics
as seen by the guest do not and hence this will not cause a problem.

Signed-off-by: Will Auld <will.auld@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-30 18:29:30 -02:00
Will Auld
8fe8ab46be KVM: x86: Add code to track call origin for msr assignment
In order to track who initiated the call (host or guest) to modify an msr
value I have changed function call parameters along the call path. The
specific change is to add a struct pointer parameter that points to (index,
data, caller) information rather than having this information passed as
individual parameters.

The initial use for this capability is for updating the IA32_TSC_ADJUST msr
while setting the tsc value. It is anticipated that this capability is
useful for other tasks.

Signed-off-by: Will Auld <will.auld@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-30 18:26:12 -02:00
Alex Williamson
5419369ed6 KVM: Fix user memslot overlap check
Prior to memory slot sorting this loop compared all of the user memory
slots for overlap with new entries.  With memory slot sorting, we're
just checking some number of entries in the array that may or may not
be user slots.  Instead, walk all the slots with kvm_for_each_memslot,
which has the added benefit of terminating early when we hit the first
empty slot, and skip comparison to private slots.

Cc: stable@vger.kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-29 23:30:32 -02:00
Xiao Guangrong
5a560f8b5e KVM: VMX: fix memory order between loading vmcs and clearing vmcs
vmcs->cpu indicates whether it exists on the target cpu, -1 means the vmcs
does not exist on any vcpu

If vcpu load vmcs with vmcs.cpu = -1, it can be directly added to cpu's percpu
list. The list can be corrupted if the cpu prefetch the vmcs's list before
reading vmcs->cpu. Meanwhile, we should remove vmcs from the list before
making vmcs->vcpu == -1 be visible

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-29 21:14:46 -02:00
Xiao Guangrong
e6c7d32172 KVM: VMX: fix invalid cpu passed to smp_call_function_single
In loaded_vmcs_clear, loaded_vmcs->cpu is the fist parameter passed to
smp_call_function_single, if the target cpu is downing (doing cpu hot remove),
loaded_vmcs->cpu can become -1 then -1 is passed to smp_call_function_single

It can be triggered when vcpu is being destroyed, loaded_vmcs_clear is called
in the preemptionable context

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-28 22:04:58 -02:00
Gleb Natapov
859f8450d8 KVM: use is_idle_task() instead of idle_cpu() to decide when to halt in async_pf
As Frederic pointed idle_cpu() may return false even if async fault
happened in the idle task if wake up is pending. In this case the code
will try to put idle task to sleep. Fix this by using is_idle_task() to
check for idle task.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-28 21:30:13 -02:00
Marcelo Tosatti
d98d07ca7e KVM: x86: update pvclock area conditionally, on cpu migration
As requested by Glauber, do not update kvmclock area on vcpu->pcpu
migration, in case the host has stable TSC.

This is to reduce cacheline bouncing.

Acked-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:15 -02:00
Marcelo Tosatti
b48aa97e38 KVM: x86: require matched TSC offsets for master clock
With master clock, a pvclock clock read calculates:

ret = system_timestamp + [ (rdtsc + tsc_offset) - tsc_timestamp ]

Where 'rdtsc' is the host TSC.

system_timestamp and tsc_timestamp are unique, one tuple
per VM: the "master clock".

Given a host with synchronized TSCs, its obvious that
guest TSC must be matched for the above to guarantee monotonicity.

Allow master clock usage only if guest TSCs are synchronized.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:15 -02:00
Marcelo Tosatti
42897d866b KVM: x86: add kvm_arch_vcpu_postcreate callback, move TSC initialization
TSC initialization will soon make use of online_vcpus.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:14 -02:00
Marcelo Tosatti
d828199e84 KVM: x86: implement PVCLOCK_TSC_STABLE_BIT pvclock flag
KVM added a global variable to guarantee monotonicity in the guest.
One of the reasons for that is that the time between

	1. ktime_get_ts(&timespec);
	2. rdtscll(tsc);

Is variable. That is, given a host with stable TSC, suppose that
two VCPUs read the same time via ktime_get_ts() above.

The time required to execute 2. is not the same on those two instances
executing in different VCPUS (cache misses, interrupts...).

If the TSC value that is used by the host to interpolate when
calculating the monotonic time is the same value used to calculate
the tsc_timestamp value stored in the pvclock data structure, and
a single <system_timestamp, tsc_timestamp> tuple is visible to all
vcpus simultaneously, this problem disappears. See comment on top
of pvclock_update_vm_gtod_copy for details.

Monotonicity is then guaranteed by synchronicity of the host TSCs
and guest TSCs.

Set TSC stable pvclock flag in that case, allowing the guest to read
clock from userspace.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:13 -02:00
Marcelo Tosatti
16e8d74d2d KVM: x86: notifier for clocksource changes
Register a notifier for clocksource change event. In case
the host switches to clock other than TSC, disable master
clock usage.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:12 -02:00
Marcelo Tosatti
e0b306fef9 time: export time information for KVM pvclock
As suggested by John, export time data similarly to how its
done by vsyscall support. This allows KVM to retrieve necessary
information to implement vsyscall support in KVM guests.

Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:12 -02:00
Marcelo Tosatti
886b470cb1 KVM: x86: pass host_tsc to read_l1_tsc
Allow the caller to pass host tsc value to kvm_x86_ops->read_l1_tsc().

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:11 -02:00
Marcelo Tosatti
51c19b4f59 x86: vdso: pvclock gettime support
Improve performance of time system calls when using Linux pvclock,
by reading time info from fixmap visible copy of pvclock data.

Originally from Jeremy Fitzhardinge.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:11 -02:00
Marcelo Tosatti
3dc4f7cfb7 x86: kvm guest: pvclock vsyscall support
Hook into generic pvclock vsyscall code, with the aim to
allow userspace to have visibility into pvclock data.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:10 -02:00
Marcelo Tosatti
71056ae22d x86: pvclock: generic pvclock vsyscall initialization
Originally from Jeremy Fitzhardinge.

Introduce generic, non hypervisor specific, pvclock initialization
routines.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:09 -02:00
Marcelo Tosatti
582b336ec2 sched: add notifier for cross-cpu migrations
Originally from Jeremy Fitzhardinge.

Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:09 -02:00
Marcelo Tosatti
189e11731a x86: pvclock: add note about rdtsc barriers
As noted by Gleb, not advertising SSE2 support implies
no RDTSC barriers.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:08 -02:00
Marcelo Tosatti
2697902be8 x86: pvclock: introduce helper to read flags
Acked-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:08 -02:00
Marcelo Tosatti
dce2db0a35 x86: pvclock: create helper for pvclock data retrieval
Originally from Jeremy Fitzhardinge.

So code can be reused.

Acked-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:07 -02:00
Marcelo Tosatti
42b5637d69 x86: pvclock: remove pvclock_shadow_time
Originally from Jeremy Fitzhardinge.

We can copy the information directly from "struct pvclock_vcpu_time_info",
remove pvclock_shadow_time.

Reviewed-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:06 -02:00
Marcelo Tosatti
b01578de45 x86: pvclock: make sure rdtsc doesnt speculate out of region
Originally from Jeremy Fitzhardinge.

pvclock_get_time_values, which contains the memory barriers
will be removed by next patch.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:06 -02:00
Marcelo Tosatti
7069ed6763 x86: kvmclock: allocate pvclock shared memory area
We want to expose the pvclock shared memory areas, which
the hypervisor periodically updates, to userspace.

For a linear mapping from userspace, it is necessary that
entire page sized regions are used for array of pvclock
structures.

There is no such guarantee with per cpu areas, therefore move
to memblock_alloc based allocation.

Acked-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:05 -02:00
Marcelo Tosatti
78c0337a38 KVM: x86: retain pvclock guest stopped bit in guest memory
Otherwise its possible for an unrelated KVM_REQ_UPDATE_CLOCK (such as due to CPU
migration) to clear the bit.

Noticed by Paolo Bonzini.

Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-27 23:29:05 -02:00
Guo Chao
807f12e57c KVM: remove unnecessary return value check
No need to check return value before breaking switch.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-13 22:14:29 -02:00
Guo Chao
951179ce86 KVM: x86: fix return value of kvm_vm_ioctl_set_tss_addr()
Return value of this function will be that of ioctl().

#include <stdio.h>
#include <linux/kvm.h>

int main () {
	int fd;
	fd = open ("/dev/kvm", 0);
	fd = ioctl (fd, KVM_CREATE_VM, 0);
	ioctl (fd, KVM_SET_TSS_ADDR, 0xfffff000);
	perror ("");
	return 0;
}

Output is "Operation not permitted". That's not what
we want.

Return -EINVAL in this case.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-13 22:14:29 -02:00
Guo Chao
18595411a7 KVM: do not kfree error pointer
We should avoid kfree()ing error pointer in kvm_vcpu_ioctl() and
kvm_arch_vcpu_ioctl().

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-13 22:14:28 -02:00
Marcelo Tosatti
f026399fc9 Merge branch 'for-queue' of https://github.com/agraf/linux-2.6 into queue
* 'for-queue' of https://github.com/agraf/linux-2.6:
  PPC: ePAPR: Convert hcall header to uapi (round 2)
  KVM: PPC: Book3S HV: Fix thinko in try_lock_hpte()
  KVM: PPC: Book3S HV: Allow DTL to be set to address 0, length 0
  KVM: PPC: Book3S HV: Fix accounting of stolen time
  KVM: PPC: Book3S HV: Run virtual core whenever any vcpus in it can run
  KVM: PPC: Book3S HV: Fixes for late-joining threads
  KVM: PPC: Book3s HV: Don't access runnable threads list without vcore lock
  KVM: PPC: Book3S HV: Fix some races in starting secondary threads
  KVM: PPC: Book3S HV: Allow KVM guests to stop secondary threads coming online
  PPC: ePAPR: Convert header to uapi
  KVM: PPC: Move mtspr/mfspr emulation into own functions
  KVM: Documentation: Fix reentry-to-be-consistent paragraph
  KVM: PPC: 44x: fix DCR read/write
2012-10-31 23:21:57 -02:00
Joerg Roedel
7de609c867 KVM: SVM: update MAINTAINERS entry
I have no access to my AMD email address anymore. Update
entry in MAINTAINERS to the new address.

Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-10-31 23:15:33 -02:00
Alexander Graf
63a1909190 PPC: ePAPR: Convert hcall header to uapi (round 2)
The new uapi framework splits kernel internal and user space exported
bits of header files more cleanly. Adjust the ePAPR header accordingly.

Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-31 13:45:32 +01:00