Commit graph

57839 commits

Author SHA1 Message Date
Christoph Hellwig
fe443ef2ac [POWERPC] spusched: Dynamic timeslicing for SCHED_OTHER
Enable preemptive scheduling for non-RT contexts.

We use the same algorithms as the CPU scheduler to calculate the time
slice length, and for now we also use the same timeslice length as the
CPU scheduler. This might be not enough for good performance and can be
changed after some benchmarking.

Note that currently we do not boost the priority for contexts waiting
on the runqueue for a long time, so contexts with a higher nice value
could starve ones with less priority.  This could easily be fixed once
the rework of the spu lists that Luke and I discussed is done.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-03 15:24:44 +10:00
Christoph Hellwig
3790180220 [POWERPC] spusched: Switch from workqueues to kthread + timer tick
Get rid of the scheduler workqueues that complicated things a lot to
a dedicated spu scheduler thread that gets woken by a traditional
scheduler tick.  By default this scheduler tick runs a HZ * 10, aka
one spu scheduler tick for every 10 cpu ticks.

Currently the tick is not disabled when we have less context than
available spus, but I will implement this later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-03 15:24:44 +10:00
Sebastian Siewior
be7031773e [POWERPC] spufs: Add bit definition
Add a bit define from book, and replace one hex number with a
symbol, for clarity.

Signed-off-by: Sebastian Siewior <bigeasy@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-03 15:24:44 +10:00
Sebastian Siewior
7a896dc5f4 [POWERPC] spufs: fix building spufs/spu_save_dump.h
Currently it fails with gcc from sdk 2.1 because of a spec change [1].
Maybe we should start using the definitions from spu_mfcio.h.

[1] http://gcc.gnu.org/ml/gcc-patches/2006-11/msg01598.html

Signed-off-by: Sebastian Siewior <bigeasy@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-03 15:24:44 +10:00
Kumar Gala
cf1d8a8a7b [POWERPC] Add copyright header to pci-common.c based on pci_{32,64}.c
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:48 -05:00
Kumar Gala
a4c9e32827 [POWERPC] Use ppc64 style list management for pci_controller on ppc32
Use the ppc64 style list management and allocation functions for
pci_controllers.  This makes the pci_controller structs just a bit more
common between ppc32 & ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:45 -05:00
Kumar Gala
58083dade5 [POWERPC] Move common PCI code out of pci_32/pci_64
Moved the low hanging fruit that was either identical or close
to it between ppc32 & ppc64 for PCI into pci-common.c

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:43 -05:00
Kumar Gala
0b1d40c4d4 [POWERPC] Move pci_bus_to_hose users to pci_bus_to_host
In the places we can move to using pci_bus_to_host, this allows us
to make pci_bus_to_host static and remove its export.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:42 -05:00
Kumar Gala
dbf8471f52 [POWERPC] Merge ppc32 and ppc64 pcibios_alloc_controller() prototypes
Make the ppc32 pcibios_alloc_controller take a device node to match
the ppc64 prototypes and have it set arch_data.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:39 -05:00
Kumar Gala
5516b540e9 [POWERPC] Use global_number in ppc32 pci_controller
Make the pci_controller struct use global_number for the PHB domain number
instead of index to match what ppc64 does and reuse its pci_domain_nr code.

Introduced a pci-common.c to handle shared code between ppc32 & ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:37 -05:00
Kumar Gala
6a506238b3 [POWERPC] Removed dead code related to PCI on ppc32
There are no in kernel users of any off these functions and some of
them were not even EXPORT_SYMBOL:

- pci_bus_io_base()
- pci_bus_io_base_phys()
- pci_bus_mem_base_phys()
- pci_resource_to_bus()
- phys_to_bus()
- pci_phys_to_bus()
- pci_bus_to_phys()
- pci_init_resource()
- resource_fixup()

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:35 -05:00
Kumar Gala
bf440b712d [POWERPC] Remove local_number from pci_controller
We never actually read local_number so lets just remove it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:34 -05:00
Kumar Gala
5531e41bf4 [POWERPC] Merge asm-ppc/pci-bridge.h into asm-power/pci-bridge.h
Moved bits need for ppc32 from asm-ppc/pci-bridge.h into
asm-powerpc/pci-bridge.h.

Removed ARCH=powerpc specific bits (and comments related to ARCH=ppc)
from asm-ppc/pci-bridge.h as its only used on ARCH=ppc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:31 -05:00
Zhang Wei
20243c72a8 [POWERPC] 86xx: Created quirk_fsl_pcie_transparent() to initialize bridge resources.
The Freescale PCI-e RC poses as a transparent bridge, but does not
implement the IO_BASE or IO_LIMIT registers in the config space.  This
means that the code which initializes the bridge resources ends up
setting the IO resources erroneously.  Add quick_fsl_pcie_transparent()
to handle this.

This change sets RC of mpc8641 to be a transparent bridge
for legacy I/O access and initializes the RC bridge resources
from the device tree.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:30 -05:00
York Sun
6d8ff10c3a [POWERPC] Let subordinate transparent bridges be transparent.
In pcibios_fixup_bus(), bridges that are subordinate
to transparent bridges were still relocating their
IORESOURCE_IO and IO_RESOURCE_MEM start and end values.

Fix this by preventing the transparent bridge from
relocating the start and end values, thus allowing the
subordinate non-transparent bridge full molestation rights.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:27 -05:00
Zhang Wei
3ac4f0e1dd [POWERPC] MPC8641HPCN: Set IDE in ULI1575 to not native mode.
Set IDE in ULI1575 to not 100% native mode, which forces
the IDE driver to probe the irq itself.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:26 -05:00
Kumar Gala
476f5779b7 [POWERPC] 86xx: Workaround PCI_PRIMARY_BUS usage
The Freescale PCI-e controllers have an issue in that they use the
PCI_PRIMARY_BUS register in the virtual P2P bridge to determine which
bus number to match on when generating a type 0 config cycle.  The
issue is if we are renumbering bus numbers to match Linux we will try
setting the PCI_PRIMARY_BUS and will not know which bus number to use
for generating type 0 config cycles.  We surpress writing the register
in the P2P bridge and always keep it at zero.

In the future when proper PCI domain support is working we should be
able to remove this.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:24 -05:00
Zhang Wei
e4725c23ec [POWERPC] 86xx: Avoid system halt if link training isn't at least L0.
We check the Link Training and State Status register to make sure we
are at least at the L0 state.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Acked-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:22 -05:00
Kumar Gala
ab0f9ad34d [POWERPC] Added indirect_type to handle variants of PCI ops
The generic PCI config ops indirect support for ppc32 covers only two
cases (implicit vs explicit) type 0/1 config cycles via set_cfg_type.
Added a indirect_type bit mask to handle other variants.

Added support for PCI-e extended registers and moved the cfg_type
handling into the bit mask for ARCH=powerpc.  We can also use this to
handle indirect quirks.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:20 -05:00
Wade Farnsworth
dfac6faf8f [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.
This adds device nodes for the PCI bridges as well as the ISA devices on
the newer revision MPC8641HPCN.  It also adds the PCI ranges to the soc
node so that address translation for the ISA devices works properly.

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:19 -05:00
Zhang Wei
bf7c036fb4 [POWERPC] Remove PCI-e errata for MPC8641 silicon ver 1.0
Remove errata for PCI-e support of Rev 1.0 of MPC8641 since its considered
obselete and is not production level silicon from Freescale.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Acked-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:17 -05:00
Kumar Gala
0a3786c5f7 [POWERPC] Removed remnants of bus_offset
Removed the remants of bus_offset and use self_busno in the mv64x60 case
and use pci_assign_all_buses on 83xx/85xx.

83xx/85xx have multiple PHBs and the firmwares on these devices tend not
to handle topologies with P2P bridges well so we let Linux just reassign
the bus numbers to match.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:15 -05:00
Kumar Gala
5ab65ecdaf [POWERPC] Added self_busno to indicate which bus number the PHB is
Added self_busno to pci_controller and indirect PCI ops to be set by
board code to indicate which bus number to use when talking to the PHB.
By default we use zero since the majority of controllers that have
implicit mechanisms to talk to the PHBs use a bus number of zero.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:13 -05:00
Kumar Gala
2a5ccbc5bb [POWERPC] Remove bus_offset in places its not really used
The user of the fsl_pcie code doesn't set bus_offset and 82xx doesn't
require it either.  Remove the places in the code that reference it so
we can remove it all together.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:12 -05:00
Kumar Gala
5229ee1852 [POWERPC] Remove hack to determine the 2nd PHBs bus number
Now that we have the pci_controller in the exclude function we can easy
figure out if the bus number is the PHB or not.  The old style of using a
variable setup at init time was actually broken and would only work in
specific cases.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:57:29 -05:00
Kumar Gala
7d52c7b0cd [POWERPC] Pass the pci_controller into pci_exclude_device
There are times that we need to know which controller we are on to decide
how to exclude devices properly.  We now pass the pci_controller that we
are going to use down to the pci_exclude_device function. This will
greatly simplify being able to exclude the PHBs in multiple controller
setups.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:57:22 -05:00
Kumar Gala
0e302a7044 [POWERPC] 52xx: Remove support for PCI bus_offset
The hose->bus_offset is only used for PCI config cycles and the 52xx PCI
config code doesn't actually ever set bus_offset to a non-zero value.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:57:15 -05:00
Kumar Gala
5ab9c4524d [POWERPC] Remove set_cfg_type for PCI indirect users that don't need it
The Freescale and Marvell PCI controllers dont require explicit setting for
type 1 config cycles.  They handle producing them by implicitly looking at the
bus, devfn.

The TSI108 and 52xx don't use the generic PCI indirect code and thus don't
bother with set_cfg_type.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:57:07 -05:00
Arnd Bergmann
d3c7ffabf0 [POWERPC] disallow building powermac and tsi108 without PCI
The TSI108 code and the 32 bit powermac and chrp platforms
have dependency on PCI that is not easy or desirable to get rid
of.

The easiest fix is to always select CONFIG_PCI if one of those
platforms is enabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-06-29 01:57:00 -05:00
Arnd Bergmann
d665840867 [POWERPC] fix building without PCI
Some code looks can be configured to be built without
PCI support, but does not work properly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-06-29 01:56:53 -05:00
Arnd Bergmann
3dfaa762b5 [POWERPC] kill isa_{io,mem}_base definitions for !PCI
When CONFIG_PCI is disabled, the definitions for isa_io_base,
isa_mem_base and pci_dram_offset are entirely unused, but they
can result in link failure because they are defined in multiple
places.

The easiest fix is to just remove all these definitions.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-06-29 01:56:43 -05:00
Arnd Bergmann
143056013f [POWERPC] mpc82xx_ads build fix
needed for 6xx allyesconfig

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-06-29 01:56:32 -05:00
Arnd Bergmann
09b55f76c9 [POWERPC] rename add_bridge to avoid namespace clashes
Many platforms currently define their own add_bridge function, some
of them globally. This breaks some multiplatform configurations.
Prefixing each of these functions with the platform name avoids
this problem.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-06-29 01:56:23 -05:00
Arnd Bergmann
b9fd305db0 [POWERPC] move 82xx/83xx/86xx Kconfig options to platform selection
The cores used in the MPC82xx/83xx/86xx embedded controllers are very similar
to those in the 32 bit general-purpose processors, so it makes sense to
treat them as the same CPU family.

Choosing between the embedded platforms and the multiplatform code is
now done in the platform menu, but functionally everything stays the
same.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-06-29 01:54:22 -05:00
David Gibson
eff2ebd207 [POWERPC] In booting-without-of.txt, clarify that properties must precede subnodes
A strict reading of the flattened device tree format defined in
booting-without-of.txt does in fact require that all the tags defining
properties for a node go before any definitions of subnodes, however
it's not particularly emphasised.  Although allowing intermingled
properties and subnodes would not be ambiguous in meaning, the kernel
parser does currently require that properties precede subnodes.
Furthermore, keeping this constraint makes life easier for various
device tree scanning tools.

Therefore, re-emphasise in booting-without-of.txt that this is a
strict requirement of the flattened device tree format.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:19:31 +10:00
David Gibson
ea1a734ad7 [POWERPC] Abolish unused ucBoardRev variables
asm-powerpc/processor.h declares, and arch/ppc/platforms/prep_setup.c
defines variables ucBoardRev, ucBoardRevMaj and ucBoardRevMin which
are used nowhere in the current kernel (neither in arch/ppc nor
arch/powerpc).  This removes them.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:19:29 +10:00
David Gibson
0846471252 [POWERPC] Make more OF-related bootwrapper functions available to non-OF platforms
Commit 2e60161337 split up
arch/powerpc/boot/of.c so that some OF functions can be used on
platforms that don't want to use the overall OF platform boot code.
This is useful on things like PReP which can have an OF implementation
which is useful for debugging output, but inadequate for booting.

However, that commit didn't export quite enough things to make a
usable OF console on a non-OF system.  In particular, the device tree
manipulation performed to initialize the OF console code must
explicitly use the OF device tree, rather than the flattened device
tree, even if the system is otherwise booting using a flattened device
tree.  This makes it so.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:19:28 +10:00
Michael Ellerman
131208c5bb [POWERPC] Turn off debugging in arch/powerpc/kernel/pci_64.c
Commit 3d5134ee83 left debugging turned on
in arch/powerpc/kernel/pci_64.c.  This turns it off again.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:19:25 +10:00
Tony Breeds
71712b4553 [POWERPC] Move iSeries_tb_recal into its own late_initcall.
Currently iSeries will recalibrate the cputime_factors in the first
settimeofday() call.

It seems the reason for doing this is to ensure a resaonable time delta after
time_init().  On current kernels (with udev), this call is made 40-60 seconds
into the boot process, by moving it to a late initcall it is called
approximately 5 seconds after time_init() is called.  This is sufficient to
recalibrate the timebase.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:19:23 +10:00
Geert Uytterhoeven
a5c631b174 [POWERPC] PS3: Storage device registration routines
Add support for storage devices to the device probe code.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:19:21 +10:00
Geert Uytterhoeven
80071802cb [POWERPC] PS3: Storage Driver Core
Add storage driver core support for the PS3.
PS3 storage devices are a special kind of PS3 system bus device.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:19:20 +10:00
Geert Uytterhoeven
32d7331852 [POWERPC] PS3: Preallocate bootmem memory for the PS3 FLASH ROM storage driver
Preallocate 256 KiB of bootmem memory for the PS3 FLASH ROM storage driver.
This can be disabled by passing `ps3flash=off' on the kernel command line.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:18:08 +10:00
Geoff Levand
e4eb8cf0ae [POWERPC] PS3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:18:06 +10:00
Geert Uytterhoeven
32f44a12e0 [POWERPC] PS3: Fix more sparse warnings
Fix some PS3 build warnings reported by `make C=1'.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:18:05 +10:00
Geoff Levand
ae639ac979 [POWERPC] PS3: Select MEMORY_HOTPLUG
The PS3 uses the kernel's hotplug memory support, so make sure it is
always enabled when building for PS3.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:18:04 +10:00
Geoff Levand
9065762edf [POWERPC] PS3: Device tree source
The PS3 device tree source.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:18:02 +10:00
Geoff Levand
62cf6a9d65 [POWERPC] Make kernel_entry_t have global scope in bootwrapper
For the convenience of custom platform code make the powerpc
bootwrapper typdef kernel_entry_t global in scope.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:16:50 +10:00
Geoff Levand
b96fbb6e1e [POWERPC] Fix constantness of bootwrapper arg
Fixes the constantness of the powerpc bootwrapper's console_ops.write
routine.  Allows printing of constant strings.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:16:49 +10:00
Geoff Levand
0aa97d6e42 [POWERPC] Add u64 printf to bootwrapper
Add support for the 'll' (long long) printf qualifier in the powerpc zImage
bootwrapper.  This is useful for bootwrapper debugging on 64 bit platforms.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:16:48 +10:00
Geoff Levand
72d068951c [POWERPC] Add signed types to bootwrapper
Add signed types to the powerpc zImage bootwrapper. These are needed by the
PS3 hcall interface.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:16:47 +10:00