* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (24 commits)
quota: Fix possible oops in __dquot_initialize()
ext3: Update kernel-doc comments
jbd/2: fixed typos
ext2: fixed typo.
ext3: Fix debug messages in ext3_group_extend()
jbd: Convert atomic_inc() to get_bh()
ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate()
jbd: Fix debug message in do_get_write_access()
jbd: Check return value of __getblk()
ext3: Use DIV_ROUND_UP() on group desc block counting
ext3: Return proper error code on ext3_fill_super()
ext3: Remove unnecessary casts on bh->b_data
ext3: Cleanup ext3_setup_super()
quota: Fix issuing of warnings from dquot_transfer
quota: fix dquot_disable vs dquot_transfer race v2
jbd: Convert bitops to buffer fns
ext3/jbd: Avoid WARN() messages when failing to write the superblock
jbd: Use offset_in_page() instead of manual calculation
jbd: Remove unnecessary goto statement
jbd: Use printk_ratelimited() in journal_alloc_journal_head()
...
@handle doesn't exist in ext2. Remove it.
Also, fit comment header into kernel-doc format.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
It's pointless - we *do* have busy inodes (root directory,
for one), so that call will fail and attempt to change
XIP flag will be ignored.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a new helper to write out the inode using the writeback code,
that is including the correct dirty bit and list manipulation. A few
of filesystems already opencode this, and a lot of others should be
using it instead of using write_inode_now which also writes out the
data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The BKL is still used in ext2_put_super(), ext2_fill_super(), ext2_sync_fs()
ext2_remount() and ext2_write_inode(). From these calls ext2_put_super(),
ext2_fill_super() and ext2_remount() are protected against each other by
the struct super_block s_umount rw semaphore. The call in ext2_write_inode()
could only protect the modification of the ext2_sb_info through
ext2_update_dynamic_rev() against concurrent ext2_sync_fs() or ext2_remount().
ext2_fill_super() and ext2_put_super() can be left out because you need a
valid filesystem reference in all three cases, which you do not have when
you are one of these functions.
If the BKL is only protecting the modification of the ext2_sb_info it can
safely be removed since this is protected by the struct ext2_sb_info s_lock.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch is a preparation necessary to remove the BKL from do_new_mount().
It explicitly adds calls to lock_kernel()/unlock_kernel() around
get_sb/fill_super operations for filesystems that still uses the BKL.
I've read through all the code formerly covered by the BKL inside
do_kern_mount() and have satisfied myself that it doesn't need the BKL
any more.
do_kern_mount() is already called without the BKL when mounting the rootfs
and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called
from various places without BKL: simple_pin_fs(), nfs_do_clone_mount()
through nfs_follow_mountpoint(), afs_mntpt_do_automount() through
afs_mntpt_follow_link(). Both later functions are actually the filesystems
follow_link inode operation. vfs_kern_mount() is calling the specified
get_sb function and lets the filesystem do its job by calling the given
fill_super function.
Therefore I think it is safe to push down the BKL from the VFS to the
low-level filesystems get_sb/fill_super operation.
[arnd: do not add the BKL to those file systems that already
don't use it elsewhere]
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Christoph Hellwig <hch@infradead.org>
'excpet' should be 'except'.
'ext3_get_branch' should be 'ext2_get_branch'.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The mbcache code was written to support a variable number of indexes,
but all the existing users use exactly one index. Simplify to code to
support only that case.
There are also no users of the cache entry free operation, and none of
the users keep extra data in cache entries. Remove those features as
well.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make sure we check the truncate constraints early on in ->setattr by adding
those checks to inode_change_ok. Also clean up and document inode_change_ok
to make this obvious.
As a fallout we don't have to call inode_newsize_ok from simple_setsize and
simplify it down to a truncate_setsize which doesn't return an error. This
simplifies a lot of setattr implementations and means we use truncate_setsize
almost everywhere. Get rid of fat_setsize now that it's trivial and mark
ext2_setsize static to make the calling convention obvious.
Keep the inode_newsize_ok in vmtruncate for now as all callers need an
audit for its removal anyway.
Note: setattr code in ecryptfs doesn't call inode_change_ok at all and
needs a deeper audit, but that is left for later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Despite its name it's now a generic implementation of ->setattr, but
rather a helper to copy attributes from a struct iattr to the inode.
Rename it to setattr_copy to reflect this fact.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the call to vmtruncate to get rid of accessive blocks to the callers
in preparation of the new truncate sequence and rename the non-truncating
version to block_write_begin.
While we're at it also remove several unused arguments to block_write_begin.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Split up the block_write_begin implementation - __block_write_begin is a new
trivial wrapper for block_prepare_write that always takes an already
allocated page and can be either called from block_write_begin or filesystem
code that already has a page allocated. Remove the handling of already
allocated pages from block_write_begin after switching all callers that
do it to __block_write_begin.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For filesystem that implement directories in pagecache we call
block_write_begin with an already allocated page for this code, while the
normal regular file write path uses the default block_write_begin behaviour.
Get rid of the __foofs_write_begin helper and opencode the normal write_begin
call in foofs_write_begin, while adding a new foofs_prepare_chunk helper for
the directory code. The added benefit is that foofs_prepare_chunk has
a much saner calling convention.
Note that the interruptible flag passed into block_write_begin is always
ignored if we already pass in a page (see next patch for details), and
we never were doing truncations of exessive blocks for this case either so we
can switch directly to block_write_begin_newtrunc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the call to vmtruncate to get rid of accessive blocks to the only
remaining caller and rename the non-truncating version to nobh_write_begin.
Get rid of the superflous file argument to it while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the call to vmtruncate to get rid of accessive blocks to the callers
in prepearation of the new truncate calling sequence. This was only done
for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant
was not needed anyway. Get rid of blockdev_direct_IO_no_locking and
its _newtrunc variant while at it as just opencoding the two additional
paramters is shorted than the name suffix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ext2 didn't update the ctime of the file when its permission was changed.
Steps to reproduce:
# touch aaa
# stat -c %Z aaa
1275289822
# setfacl -m 'u::x,g::x,o::x' aaa
# stat -c %Z aaa
1275289822 <- unchanged
But, according to the spec of the ctime, ext2 must update it.
Port of ext3 patch by Miao Xie <miaox@cn.fujitsu.com>.
Signed-off-by: Jan Kara <jack@suse.cz>
mtime and ctime should be changed only if the file size has actually
changed. Patches changing ext2 and tmpfs from vmtruncate to new truncate
sequence has caused regressions where they always update timestamps.
There is some strange cases in POSIX where truncate(2) must not update
times unless the size has acutally changed, see 6e656be89.
This area is all still rather buggy in different ways in a lot of
filesystems and needs a cleanup and audit (ideally the vfs will provide
a simple attribute or call to direct all filesystems exactly which
attributes to change). But coming up with the best solution will take a
while and is not appropriate for rc anyway.
So fix recent regression for now.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
quota: Convert quota statistics to generic percpu_counter
ext3 uses rb_node = NULL; to zero rb_root.
quota: Fixup dquot_transfer
reiserfs: Fix resuming of quotas on remount read-write
pohmelfs: Remove dead quota code
ufs: Remove dead quota code
udf: Remove dead quota code
quota: rename default quotactl methods to dquot_
quota: explicitly set ->dq_op and ->s_qcop
quota: drop remount argument to ->quota_on and ->quota_off
quota: move unmount handling into the filesystem
quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers
quota: move remount handling into the filesystem
ocfs2: Fix use after free on remount read-only
Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c
I also have commented a possible bug in existing ext2 code, marked with XXX.
Cc: linux-ext4@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We don't name our generic fsync implementations very well currently.
The no-op implementation for in-memory filesystems currently is called
simple_sync_file which doesn't make too much sense to start with,
the the generic one for simple filesystems is called simple_fsync
which can lead to some confusion.
This patch renames the generic file fsync method to generic_file_fsync
to match the other generic_file_* routines it is supposed to be used
with, and the no-op implementation to noop_fsync to make it obvious
what to expect. In addition add some documentation for both methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Follow the dquot_* style used elsewhere in dquot.c.
[Jan Kara: Fixed up missing conversion of ext2]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Only set the quota operation vectors if the filesystem actually supports
quota instead of doing it for all filesystems in alloc_super().
[Jan Kara: Export dquot_operations and vfs_quotactl_ops]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently the VFS calls into the quotactl interface for unmounting
filesystems. This means filesystems with their own quota handling
can't easily distinguish between user-space originating quotaoff
and an unount. Instead move the responsibily of the unmount handling
into the filesystem to be consistent with all other dquot handling.
Note that we do call dquot_disable a lot later now, e.g. after
a sync_filesystem. But this is fine as the quota code does all its
writes via blockdev's mapping and that is synced even later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Instead of having wrappers in the VFS namespace export the dquot_suspend
and dquot_resume helpers directly. Also rename vfs_quota_disable to
dquot_disable while we're at it.
[Jan Kara: Moved dquot_suspend to quotaops.h and made it inline]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently do_remount_sb calls into the dquot code to tell it about going
from rw to ro and ro to rw. Move this code into the filesystem to
not depend on the dquot code in the VFS - note ocfs2 already ignores
these calls and handles remount by itself. This gets rid of overloading
the quotactl calls and allows to unify the VFS and XFS codepaths in
that area later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Quota must being initialized if size or uid/git changes requested.
But initialization performed in two different places:
in case of i_size file system is responsible for dquot init
, but in case of uid/gid init will be called internally in
dquot_transfer().
This ambiguity makes code harder to understand.
Let's move this logic to one common helper function.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
The BKL is still used in ext2_put_super(), ext2_fill_super(), ext2_sync_fs()
ext2_remount() and ext2_write_inode(). From these calls ext2_put_super(),
ext2_fill_super() and ext2_remount() are protected against each other by
the struct super_block s_umount rw semaphore. The call in ext2_write_inode()
could only protect the modification of the ext2_sb_info through
ext2_update_dynamic_rev() against concurrent ext2_sync_fs() or ext2_remount().
ext2_fill_super() and ext2_put_super() can be left out because you need a
valid filesystem reference in all three cases, which you do not have when
you are one of these functions.
If the BKL is only protecting the modification of the ext2_sb_info it can
safely be removed since this is protected by the struct ext2_sb_info s_lock.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Add a spinlock that protects against concurrent modifications of
s_mount_state, s_blocks_last, s_overhead_last and the content of the
superblock's buffer pointed to by sbi->s_es. The spinlock is now used in
ext2_xattr_update_super_block() which was setting the
EXT2_FEATURE_COMPAT_EXT_ATTR flag on the superblock without protection
before. Likewise the spinlock is used in ext2_show_options() to have a
consistent view of the mount options.
This is a preparation patch for removing the BKL from ext2 in the next
patch.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jan Kara <jack@suse.cz>
Move ext2_write_super() out of ext2_setup_super() as a preparation for the
next patch that adds a new lock for superblock fields.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Both function originally did similar things except that ext2_sync_super()
is returning after the call to sync_dirty_buffer(sbh). Therefore this
patch adds a wait flag to tell ext2_sync_super() if it has to call
sync_dirty_buffer() to wait for in-progress I/O to finish.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Depending in the state (valid or unchecked) of the filesystem either
ext2_sync_super() or ext2_commit_super() is called. If the filesystem is
currently valid (it is checked), we first mark it unchecked and afterwards
duplicate the work that ext2_sync_super() is doing later. Therefore this
patch removes the duplicate code and calls ext2_sync_super() directly after
marking the filesystem unchecked.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
This is probably a typo since the write time should actually be updated by
ext2_sync_fs() instead of the mount time.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
ext2_sync_fs() used to duplicate the code from ext2_clear_super_error().
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
This patch removes a useless call to brelse(bitmap_bh) since at that
point bitmap_bh is NULL and slightly cleans up bitmap_bh handling.
Signed-off-by: Francis Moreau <francis.moro@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
There is no point in loading bitmap for groups which are completely full.
This causes noticeable performance problems (and memory pressure) on small
systems with large full filesystem
(http://marc.info/?l=linux-ext4&m=126843108314310&w=2).
Port of the same ext3 patch.
Signed-off-by: Jan Kara <jack@suse.cz>
generic setattr implementation is no longer responsible for
quota transfer so synlinks must be handled via ext2_setattr.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
This gives the filesystem more information about the writeback that
is happening. Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
