Commit graph

255440 commits

Author SHA1 Message Date
Amber Jain
e831599cb8 [media] V4L2: omap_vout: Remove GFP_DMA allocation as ZONE_DMA is not configured on OMAP
Remove GFP_DMA from the __get_free_pages() call from omap_vout as ZONE_DMA
is not configured on OMAP. Earlier the page allocator used to return a page
from ZONE_NORMAL even when GFP_DMA is passed and CONFIG_ZONE_DMA is disabled.
As a result of commit a197b59ae6, page allocator
returns null in such a scenario with a warning emitted to kernel log.

Signed-off-by: Amber Jain <amber@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:05 -03:00
Kirill Smelkov
949d926458 [media] uvcvideo: Add FIX_BANDWIDTH quirk to HP Webcam on HP Mini 5103 netbook
The camera there identifies itself as being manufactured by Cheng Uei
Precision Industry Co., Ltd (Foxlink), and product is titled as "HP
Webcam [2 MP Fixed]".

I was trying to get 2 USB video capture devices to work simultaneously,
and noticed that the above mentioned webcam always requires packet size
= 3072 bytes per micro frame (~= 23.4 MB/s isoc bandwidth), which is far
more than enough to get standard NTSC 640x480x2x30 = ~17.6 MB/s isoc
bandwidth.

As there are alt interfaces with smaller MxPS

    T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
    D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=05c8 ProdID=0403 Rev= 1.06
    S:  Manufacturer=Foxlink
    S:  Product=HP Webcam [2 MP Fixed]
    S:  SerialNumber=200909240102
    C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
    A:  FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
    E:  Ad=83(I) Atr=03(Int.) MxPS=  16 Ivl=4ms
    I:* If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    I:  If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    E:  Ad=81(I) Atr=05(Isoc) MxPS= 128 Ivl=125us
    I:  If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    E:  Ad=81(I) Atr=05(Isoc) MxPS= 512 Ivl=125us
    I:  If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    E:  Ad=81(I) Atr=05(Isoc) MxPS=1024 Ivl=125us
    I:  If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    E:  Ad=81(I) Atr=05(Isoc) MxPS=1536 Ivl=125us
    I:  If#= 1 Alt= 5 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    E:  Ad=81(I) Atr=05(Isoc) MxPS=2048 Ivl=125us
    I:  If#= 1 Alt= 6 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    E:  Ad=81(I) Atr=05(Isoc) MxPS=2688 Ivl=125us
    I:  If#= 1 Alt= 7 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
    E:  Ad=81(I) Atr=05(Isoc) MxPS=3072 Ivl=125us

UVC_QUIRK_FIX_BANDWIDTH helps here and NTSC video can be served with
MxPS=2688 i.e. 20.5 MB/s isoc bandwidth.

In terms of microframe time allocation, before the quirk NTSC video
required 60 usecs / microframe and 53 usecs / microframe after.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:05 -03:00
Devin Heitmueller
d749fb663e [media] au8522: set signal field to 100% when signal present
The signal state field in G_TUNER is typically scaled from 0-100%.  Since we
don't know the signal level, we really would prefer the field to contain 100%
than 1/256, which in many utilities (such as v4l2-ctl) rounds to 0% even when
a signal is actually present.

This patch makes the behavior consistent with other drivers.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:05 -03:00
Devin Heitmueller
de99d5328c [media] cx231xx: Provide signal lock status in G_INPUT
Make use of the signal state registers to properly populate the signal lock
registers in the cx231xx driver.

This allows applications to know whether there is a signal present even in
devices which lack a tuner (since such apps typically won't call G_TUNER if
no tuner is present).

[mchehab@redhat.com: Fix CodingStyle: don't use {} for one-line if's]
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:04 -03:00
Devin Heitmueller
44ecf1df94 [media] cx231xx: Fix power ramping issue
On platforms that have CONFIG_HZ set to 100, the power ramp time effectively
ends up being 10ms.  However, on those that have a higher CONFIG_HZ, the time
ends up *actually* being 5ms, which doesn't allow enough time for the hardware
to be fully powered up before attempting to address it via i2c.

Change the constant to 10ms, which is long enough for the hardware to power
up, and won't really be anymore time than it was previously on platforms
with CONFIG_HZ being 100.

Credit goes to Mauro Carvalho Chehab and Gerd Hoffmann who previously
investigated this issue.

Tested with the Hauppauge USBLive 2, with which the problem was readily
reproducible after setting CONFIG_HZ to 1000.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:04 -03:00
Devin Heitmueller
992299e84a [media] Fix regression introduced which broke the Hauppauge USBLive 2
The following patch addresses the regression introduced in the cx231xx
driver which stopped the Hauppauge USBLive2 from working.

Confirmed working by both myself and the user who reported the issue
on the KernelLabs blog (Robert DeLuca).

At some point during refactoring of the cx231xx driver, the USBLive 2 device
became broken.  This patch results in the device working again.

Thanks to Robert DeLuca for sponsoring this work.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Robert DeLuca <robertdeluca@me.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:04 -03:00
Stephan Lachowsky
c0c5e71e46 [media] uvcvideo: Fix control mapping for devices with multiple chains
The search for matching extension units fails to take account of the
current chain.  In the case where you have two distinct video chains,
both containing an XU with the same GUID but different unit ids, you
will be unable to perform a mapping on the second chain because entity
on the first chain will always be found first

Fix this by only searching the current chain when performing a control
mapping.  This is analogous to the search used by uvc_find_control(),
and is the correct behaviour.

Signed-off-by: Stephan Lachowsky <stephan.lachowsky@maxim-ic.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:04 -03:00
Sergei Shtylyov
fa14001480 [media] bt8xx: use pci_dev->subsystem_{vendor|device}
The driver reads PCI subsystem IDs from the PCI configuration registers while
they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}'
fields of 'struct pci_dev'...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:04 -03:00
Mauro Carvalho Chehab
119faf90ed [media] drxk: Fix the logic that selects between DVB-C annex A and C
Fix the DRX-K logic that selects between DVB-C annex A and C

Fix a typo where DVB-C annex type is set via setEnvParameters, but
the driver, uses, instead, setParamParameters[2].

While here, cleans up the code, fixing a bad identation at the fallback
code for other types of firmware, and put the multiple-line comments
into the Linux CodingStyle.

Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:04 -03:00
Mauro Carvalho Chehab
f07a0bc111 [media] drxk: Fix read debug message
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:03 -03:00
Mauro Carvalho Chehab
e716adacef [media] drxk: Fix error return code during drxk init
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:03 -03:00
Mauro Carvalho Chehab
ab12f41f62 [media] drxk: Remove goto/break after return
After return, we don't need any other statement to change the
function flux ;)

Reported-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:03 -03:00
Mauro Carvalho Chehab
320ed23ebf [media] drxk: Fix a bug at some switches that broke DVB-T
The error propagation changeset c23bf4402 broke the DVB-T
code.

The legacy way for propagate errors was:

do {
	status = foo_func()
	if (status < 0)
		break;
} while (0);
return status;

However, on a few places, it was doing:
do {
	switch(foo) {
	case bar:
		status = foo_func()
		if (status < 0)
			break;
		break;
	}
	switch(foo2) {
	case bar:
		status = foo_func()
		if (status < 0)
			break;
		break;
	}
	...
} while (0);
return (status)

The inner error break were not working, as it were breaking only
the switch, instead of the do. The solution used were to do a
s/break/goto error/ at the inner breaks, but preserving the last
break. Onfortunately, on a few switches, the replacement were
applied also to the final break for the case statements.

Fix the broken logic, by reverting them to break, where pertinent,
in order to fix DVB-T support.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:03 -03:00
Mauro Carvalho Chehab
c4c3a3d32a [media] Remove the double symbol increment hack from drxk_hard
Both ngene and ddbrige calls dvb_attach once for drxk_attach.
The logic used there, and by tda18271c2dd driver is different
from similar logic on other frontends.

The right fix is to change them to use the same logic, but,
while we don't do that, we need to patch em28xx-dvb in order
to do cope with ngene/ddbridge magic.

While here, document why drxk_t_release should do nothing.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:03 -03:00
Mauro Carvalho Chehab
33ba28eebc [media] em28xx: Add other Terratec H5 USB ID's
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:02 -03:00
Mauro Carvalho Chehab
106ff9e013 Revert "[media] DVB: dvb_frontend: off by one in dtv_property_dump()"
This reverts commit a3e4adf274f86b2363fedaa964297cb38526cef0.

As pointed by Andread Oberritter <obi@linuxtv.org>:

	That's wrong, because the array size is DTV_MAX_COMMAND + 1.
	Using the ARRAY_SIZE macro instead might reduce the confusion.

Also, changeset 3995223038 already fixed this issue.

Reported-by: Andread Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:02 -03:00
istvan_v@mailbox.hu
bded70d296 [media] cx88: implemented luma notch filter control
The following patch adds a new control that makes it possible to set the
luma notch filter type to finetune picture quality.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:01 -03:00
istvan_v@mailbox.hu
eea16e3661 [media] cx88: implemented sharpness control
This patch implements support for a sharpness control, using the luma
peaking filter feature of cx2388x.

[mchehab@redhat.com: use cx_andor instead of cx_write]
Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:01 -03:00
Tomasz Stanislawski
fef1c8d018 [media] v4l: s5p-tv: add TV Mixer driver for Samsung S5P platform
Add driver for TV Mixer on Samsung platforms from S5P family.
Mixer is responsible for merging images from three layers and
passing result to the output.

Drivers are using:
- v4l2 framework
- videobuf2
- runtime PM

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:01 -03:00
Tomasz Stanislawski
9a498400fe [media] v4l: s5p-tv: add SDO driver for Samsung S5P platform
Add drivers for Standard Definition output (SDO) on Samsung platforms
from S5P family. The driver provides control over streaming analog TV
via Composite connector.

Driver is using:
- v4l2 framework
- runtime PM

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:01 -03:00
Tomasz Stanislawski
a52074ee7a [media] v4l: s5p-tv: add drivers for HDMI on Samsung S5P platform
Add drivers for HDMI outputs on Samsung platforms from S5P family.

Drivers are using:
- v4l2 framework
- runtime PM

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:01 -03:00
Tomasz Stanislawski
5930ab2ba0 [media] v4l: add g_std_output callback to V4L2 subdev
Callback is used to acquire current analog TV standard from a subdev.
It is used to avoid keeping current standard in top-level driver.

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:00 -03:00
Tomasz Stanislawski
8b32dd0d3f [media] v4l: add g_dv_preset callback to V4L2 subdev
Callback is used to acquire current digital video preset from a subdev.
It is used to avoid keeping dv preset in top-level driver.

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:00 -03:00
Tomasz Stanislawski
839cf81346 [media] v4l: add g_tvnorms_output callback to V4L2 subdev
Callback is used to acquire TV norms supported by a subdev.
It is used to avoid having standards in top-level driver.

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:00 -03:00
Devin Heitmueller
243bf1a24d [media] cx88: properly maintain decoder config when using MPEG encoder
The cx88 driver would force core->input to always be zero when doing the
the request_acquire().  While it wasn't actually changing the input register
in the hardware, the driver makes decision based on the current input.  In
particular, it decides whether to do things like enabling the comb filter
when on a composite input but disabling it on s-video.  So for example, on
the HVR-1300, using the s-video input with the MPEG encoder would end up with
the video decoder core configured as though the input type were composite.

In short, the driver state did not match the hardware state.

This patch does two things:

1.  It forces the input to zero only if actually switching to DVB mode.  This
prevents the input from changing when the blackbird driver opens the device.

2.  Keep track of what the input was set to when switching to DVB, and reset
it back when done.  This eliminates a condition where for example the user
had the analog side of the board set to capture on the s-video input, then
he used DVB for a bit, then the analog input would unexpectedly be set to
the tuner input.

This work was sponsored by Anevia S.A.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Florent Audebert <florent.audebert@anevia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:00 -03:00
Kamil Debski
af93574678 [media] MFC: Add MFC 5.1 V4L2 driver
Multi Format Codec 5.1 is a hardware video coding acceleration
module found in the S5PV210 and Exynos4 Samsung SoCs. It is
capable of handling a range of video codecs and this driver
provides a V4L2 interface for video decoding and encoding.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Jeongtae Park <jtp.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:56:00 -03:00
Jarod Wilson
c53f9f00e5 [media] redrat3: improve compat with lirc userspace decode
This is admittedly a bit of a hack, but if we change our timeout value
to something longer and fudge our synthesized trailing space sample
based on the initial pulse sample, rc-core decode continues to work just
fine with both rc-6 and rc-5, and now lirc userspace decode shows proper
repeats for both of those protocols as well. Also tested NEC
successfully with both decode options.

We do still need a reset timer callback using the hardware's timeout
value to make sure we actually process samples correctly, regardless of
our somewhat hacky timeout and synthesized trailer above.

This also adds a missing del_timer_sync call to the module unload path.

CC: Chris Dodge <chris@redrat.co.uk>
CC: Andrew Vincer <andrew.vincer@redrat.co.uk>
CC: Stephen Cox <scox_nz@yahoo.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:59 -03:00
Jarod Wilson
2c594ffae4 [media] redrat3: cap duration in the right place
Trying to cap duration before multiplying it was obviously wrong.

CC: Chris Dodge <chris@redrat.co.uk>
CC: Andrew Vincer <andrew.vincer@redrat.co.uk>
CC: Stephen Cox <scox_nz@yahoo.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:59 -03:00
Jarod Wilson
68b2a69d10 [media] redrat3: sending extra trailing space was useless
We already add a trailing space, this wasn't doing anything useful, and
actually confused lirc userspace a bit. Rip it out.

CC: Chris Dodge <chris@redrat.co.uk>
CC: Andrew Vincer <andrew.vincer@redrat.co.uk>
CC: Stephen Cox <scox_nz@yahoo.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:59 -03:00
Jarod Wilson
f5f2cc646a [media] rc-core support for Microsoft IR keyboard/mouse
This is a custom IR protocol decoder, for the RC-6-ish protocol used by
the Microsoft Remote Keyboard, apparently developed internally at
Microsoft, and officially dubbed MCIR-2, per their March 2011 remote and
transceiver requirements and specifications document, which also touches
on this IR keyboard/mouse device.

Its a standard keyboard with embedded thumb stick mouse pointer and
mouse buttons, along with a number of media keys. The media keys are
standard RC-6, identical to the signals from the stock MCE remotes, and
will be handled as such. The keyboard and mouse signals will be decoded
and delivered to the system by an input device registered specifically
by this driver.

Successfully tested with multiple mceusb-driven transceivers, as well as
with fintek-cir and redrat3 hardware. Essentially, any raw IR hardware
with enough sampling resolution should be able to use this decoder,
nothing about it is at all receiver-hardware-specific.

This work is inspired by lirc_mod_mce:

The documentation there and code aided in understanding and decoding the
protocol, but the bulk of the code is actually borrowed more from the
existing in-kernel decoders than anything. I did recycle the keyboard
keycode table, a few defines, and some of the keyboard and mouse data
parsing bits from lirc_mod_mce though.

Special thanks to James Meyer for providing the hardware, and being
patient with me as I took forever to get around to writing this.

callback routine to ensure we don't get any stuck keys, and used
symbolic names for the keytable. Also cc'ing Florian this time, who I
believe is the original mod-mce author...

CC: Florian Demski <fdemski@users.sourceforge.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:59 -03:00
Emilio David Diaus Lopez
a062d04bb9 [media] af9015: add support for Sveon STV22 [1b80:e401]
Signed-off-by: Emilio David Diaus Lopez <reality_es@yahoo.es>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:58 -03:00
Antti Palosaari
713d9b5d98 [media] af9015: remove 2nd I2C-adapter
It is useless. There is only one physical I2C-adapter.

2nd adapter was added originally due to some plans for allowing only one
demod to access bus at time. But I never implemented proper locking...

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:58 -03:00
Antti Palosaari
3509cbdfac [media] af9015: remove old FW based IR polling code
Remove old code which is not used anymore since IR code is read
directly from memory nowadays.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:58 -03:00
Antti Palosaari
709d92083a [media] af9015: add more I2C msg checks
Return EOPNOTSUPP for too long messages.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:57 -03:00
Antti Palosaari
16b2dc2a8b [media] af9015: small optimization
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:57 -03:00
Antti Palosaari
ae81aab3fa [media] af9015: map remote for MSI DIGIVOX Duo
Reported-by: Jacek M. Holeczek <jacek.m.holeczek@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:56 -03:00
Juergen Lock
879b0d7957 [media] af9015: setup rc keytable for LC-Power LC-USB-DVBT
That's this tuner:

The credit card sized remote more or less works if I set remote=4,
so I added the hash to get it autodetected.  (`more or less' there
meaning sometimes buttons are `stuck on repeat', i.e. ir-keytable -t
keeps repeating the same scancode until i press another button.)

Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:56 -03:00
Jesper Juhl
8afe9119e2 [media] media, Micronas dvb-t: Fix mem leaks, don't needlessly zero mem, fix spelling
In drivers/media/dvb/frontends/drxd_hard.c::load_firmware() I see 3
small issues:

 1) When the 'fw' variable goes out of scope we'll leak the memory
 allocated to it by request_firmware() by neglecting to call
 release_firmware().

 2) After a successful request_firmware() we allocate fw->size bytes
 of memory using kzalloc() only to immediately overwrite all that
 memory with memcpy(), so asking for zeroed memory seems like wasted
 effort - just use kmalloc().

 3) In one of the error messages "no memory" lacks a space and is
 written as "nomemory".

This patch fixes all 3 issues.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:56 -03:00
Jarod Wilson
9b67693ccf [media] rc-rc6-mce: minor keymap updates
Microsoft's Windows Media Center specification and requirements doc from
2011.03.18 now refers to the former Power Toggle button as the Sleep
Toggle, and recommends using a new moon sleep icon for it. Its the same
key, but its apparently always been meant to put the system to sleep,
not power it off. Adjust accordingly. While we're here, lets also remove
the duplicate KEY_PLAYPAUSE entry.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:56 -03:00
Julia Lawall
ef60e8f5d5 [media] drivers/media/video/cx231xx/cx231xx-cards.c: add missing kfree
Clear the cx231xx_devused variable and free dev in the error handling code,
as done in the error handling code nearby.

The semantic match that finds this problem is as follows:

// <smpl>
@r@
identifier x;
@@

kfree(x)

@@
identifier r.x;
expression E1!=0,E2,E3,E4;
statement S;
@@

(
if (<+...x...+>) S
|
if (...) { ... when != kfree(x)
               when != if (...) { ... kfree(x); ... }
               when != x = E3
* return E1;
}
... when != x = E2
if (...) { ... when != x = E4
 kfree(x); ... return ...; }
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:55 -03:00
Julia Lawall
ee893e9adc [media] drivers/media/video: add missing kfree
Free the recently allocated qcam in each case.

The semantic match that finds this problem is as follows:

// <smpl>
@r@
identifier x;
@@

kfree(x)

@@
identifier r.x;
expression E1!=0,E2,E3,E4;
statement S;
@@

(
if (<+...x...+>) S
|
if (...) { ... when != kfree(x)
               when != if (...) { ... kfree(x); ... }
               when != x = E3
* return E1;
}
... when != x = E2
if (...) { ... when != x = E4
 kfree(x); ... return ...; }
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:55 -03:00
Adam M. Dutko
37f9619dd5 [media] TM6000: alsa: Clean up kernel coding style errors
There were several coding style errors as reported by checkpatch.pl. This
patch should fix those errors with the single exception of the open square
bracket issue on line 45.

[mchehab@redhat.com: Fix a merge conflict]
Signed-off-by: Adam M. Dutko <dutko.adam@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:55 -03:00
Mauro Carvalho Chehab
51b6d717fb [media] tm6000: remove a check for NO_PCM_LOCK
This was likely used by some test. There's no sense on keeping it
upstream.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:55 -03:00
Dan Carpenter
bca3ba7904 [media] DVB: dvb_frontend: off by one in dtv_property_dump()
If the tvp->cmd == DTV_MAX_COMMAND then we read past the end of the
array.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:55 -03:00
istvan_v@mailbox.hu
0cf8af57f1 [media] cx23885: added support for card 107d:6f39
This patch, based on code by Mirek Slugen, implements support for the
Leadtek WinFast PxDVR3200 H card with XC4000 tuner (107d:6f39).

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:55 -03:00
Jesper Juhl
0d334f7f7a [media] drivers/media: static should be at beginning of declaration
Make sure that the 'static' keywork is at the beginning of declaration
for drivers/media/video/omap/omap_vout.c

This gets rid of warnings like
when building with -Wold-style-declaration (and/or -Wextra which also
enables it).

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:54 -03:00
Jonathan Corbet
9f26392a6a [media] marvell-cam: clean up a couple of unused cam structure fields
Delete a couple of leftover fields whose time has passed.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:54 -03:00
Jonathan Corbet
7498469f61 [media] marvell-cam: Allow selection of supported buffer modes
The Marvell camera core can support all three videobuf2 buffer modes, which
is slick, but it also requires that all three modes be built and present,
even though only one is likely to be used.  This patch allows the supported
modes to be selected at configuration time, reducing the footprint of the
driver.  Prior to this patch, the MMP camera driver looked like this:

mmp_camera             19092  0
videobuf2_core         15542  1 mmp_camera
videobuf2_dma_sg        3173  1 mmp_camera
videobuf2_dma_contig     2188  1 mmp_camera
videobuf2_vmalloc       1718  1 mmp_camera
videobuf2_memops        2100  3 videobuf2_dma_sg,videobuf2_dma_contig,videobuf2_vmalloc

Afterward, instead, with scatter/gather only configured:

mmp_camera             16021  0
videobuf2_core         15542  1 mmp_camera
videobuf2_dma_sg        3173  1 mmp_camera
videobuf2_memops        2100  1 videobuf2_dma_sg

The total goes from 43,813 bytes to 36,836.

The emphasis has been on simplicity and minimal #ifdef use rather than on
squeezing out every possible byte of code.  For configuration, the driver
simply looks at which videobuf2 modes have been configured in and supports
them all; it's simplistic but should be good enough.

The cafe driver is set to support vmalloc and dma-contig; mmp supports only
dma-sg, since that's the only mode that really makes sense to use.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:54 -03:00
Jonathan Corbet
221a8248b9 [media] marvell-cam: power down mmp camera on registration failure
If registration does not work, we don't want to leave the sensor powered on.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:54 -03:00
Jonathan Corbet
c9fb8bfaf1 [media] marvell-cam: remove {min,max}_buffers parameters
Somewhere along the way the code stopped actually paying any attention to
them, and I doubt anybody has ever made use of them.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:55:54 -03:00