This adds a whitelist for the symbols used by the cuttlefish device and
updates the ABI representation accordingly.
These are the steps:
1) Perform a clean device build (Cuttlefish):
$ BUILD_CONFIG=common/build.config.cuttlefish.aarch64 build/build.sh
2) Extract the ABI whitelist for this device
$ build/abi/extract_symbols out/android-4.19/dist/ --whitelist common/abi_gki_aarch64_cuttlefish_whitelist
3) Add the whitelist to the list of ADDITIONAL_KMI_WHITELISTS
4) Update the ABI representation for the GKI
$ BUILD_CONFIG=common/build.config.gki.aarch64 build/build_abi.sh --update
Bug: 147894960
Change-Id: I433b200dd5b79bf9ee9adeea1db7b66c571f6539
Signed-off-by: Matthias Maennich <maennich@google.com>
Now that GKI comes without modules, the GKI whitelist is effectively
empty as GKI itself would not require any stable symbols any longer.
Hence, clear out the main whitelist and ABI representation. In
subsequent changes I will extend the additional whitelists to bring back
the actually used symbols.
Bug: 147894960
Change-Id: If34fad5f4bded40a6d76dd75694c772d05271332
Signed-off-by: Matthias Maennich <maennich@google.com>
-----BEGIN PGP SIGNATURE-----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=3D8z
-----END PGP SIGNATURE-----
Merge 4.19.103 into android-4.19
Changes in 4.19.103
Revert "drm/sun4i: dsi: Change the start delay calculation"
ovl: fix lseek overflow on 32bit
kernel/module: Fix memleak in module_add_modinfo_attrs()
media: iguanair: fix endpoint sanity check
ocfs2: fix oops when writing cloned file
x86/cpu: Update cached HLE state on write to TSX_CTRL_CPUID_CLEAR
udf: Allow writing to 'Rewritable' partitions
printk: fix exclusive_console replaying
iwlwifi: mvm: fix NVM check for 3168 devices
sparc32: fix struct ipc64_perm type definition
cls_rsvp: fix rsvp_policy
gtp: use __GFP_NOWARN to avoid memalloc warning
l2tp: Allow duplicate session creation with UDP
net: hsr: fix possible NULL deref in hsr_handle_frame()
net_sched: fix an OOB access in cls_tcindex
net: stmmac: Delete txtimer in suspend()
bnxt_en: Fix TC queue mapping.
tcp: clear tp->total_retrans in tcp_disconnect()
tcp: clear tp->delivered in tcp_disconnect()
tcp: clear tp->data_segs{in|out} in tcp_disconnect()
tcp: clear tp->segs_{in|out} in tcp_disconnect()
rxrpc: Fix use-after-free in rxrpc_put_local()
rxrpc: Fix insufficient receive notification generation
rxrpc: Fix missing active use pinning of rxrpc_local object
rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect
media: uvcvideo: Avoid cyclic entity chains due to malformed USB descriptors
mfd: dln2: More sanity checking for endpoints
ipc/msg.c: consolidate all xxxctl_down() functions
tracing: Fix sched switch start/stop refcount racy updates
rcu: Avoid data-race in rcu_gp_fqs_check_wake()
brcmfmac: Fix memory leak in brcmf_usbdev_qinit
usb: typec: tcpci: mask event interrupts when remove driver
usb: gadget: legacy: set max_speed to super-speed
usb: gadget: f_ncm: Use atomic_t to track in-flight request
usb: gadget: f_ecm: Use atomic_t to track in-flight request
ALSA: usb-audio: Fix endianess in descriptor validation
ALSA: dummy: Fix PCM format loop in proc output
mm/memory_hotplug: fix remove_memory() lockdep splat
mm: move_pages: report the number of non-attempted pages
media/v4l2-core: set pages dirty upon releasing DMA buffers
media: v4l2-core: compat: ignore native command codes
media: v4l2-rect.h: fix v4l2_rect_map_inside() top/left adjustments
lib/test_kasan.c: fix memory leak in kmalloc_oob_krealloc_more()
irqdomain: Fix a memory leak in irq_domain_push_irq()
platform/x86: intel_scu_ipc: Fix interrupt support
ALSA: hda: Add Clevo W65_67SB the power_save blacklist
KVM: arm64: Correct PSTATE on exception entry
KVM: arm/arm64: Correct CPSR on exception entry
KVM: arm/arm64: Correct AArch32 SPSR on exception entry
KVM: arm64: Only sign-extend MMIO up to register width
MIPS: fix indentation of the 'RELOCS' message
MIPS: boot: fix typo in 'vmlinux.lzma.its' target
s390/mm: fix dynamic pagetable upgrade for hugetlbfs
powerpc/xmon: don't access ASDR in VMs
powerpc/pseries: Advance pfn if section is not present in lmb_is_removable()
smb3: fix signing verification of large reads
PCI: tegra: Fix return value check of pm_runtime_get_sync()
mmc: spi: Toggle SPI polarity, do not hardcode it
ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards
ACPI / battery: Deal with design or full capacity being reported as -1
ACPI / battery: Use design-cap for capacity calculations if full-cap is not available
ACPI / battery: Deal better with neither design nor full capacity not being reported
alarmtimer: Unregister wakeup source when module get fails
ubifs: Reject unsupported ioctl flags explicitly
ubifs: don't trigger assertion on invalid no-key filename
ubifs: Fix FS_IOC_SETFLAGS unexpectedly clearing encrypt flag
ubifs: Fix deadlock in concurrent bulk-read and writepage
crypto: geode-aes - convert to skcipher API and make thread-safe
PCI: keystone: Fix link training retries initiation
mmc: sdhci-of-at91: fix memleak on clk_get failure
hv_balloon: Balloon up according to request page number
mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile
crypto: api - Check spawn->alg under lock in crypto_drop_spawn
crypto: ccree - fix backlog memory leak
crypto: ccree - fix pm wrongful error reporting
crypto: ccree - fix PM race condition
scripts/find-unused-docs: Fix massive false positives
scsi: qla2xxx: Fix mtcp dump collection failure
power: supply: ltc2941-battery-gauge: fix use-after-free
ovl: fix wrong WARN_ON() in ovl_cache_update_ino()
f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()
f2fs: fix miscounted block limit in f2fs_statfs_project()
f2fs: code cleanup for f2fs_statfs_project()
PM: core: Fix handling of devices deleted during system-wide resume
of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc
dm zoned: support zone sizes smaller than 128MiB
dm space map common: fix to ensure new block isn't already in use
dm crypt: fix benbi IV constructor crash if used in authenticated mode
dm: fix potential for q->make_request_fn NULL pointer
dm writecache: fix incorrect flush sequence when doing SSD mode commit
padata: Remove broken queue flushing
tracing: Annotate ftrace_graph_hash pointer with __rcu
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
ftrace: Add comment to why rcu_dereference_sched() is open coded
ftrace: Protect ftrace_graph_hash with ftrace_sync
samples/bpf: Don't try to remove user's homedir on clean
crypto: ccp - set max RSA modulus size for v3 platform devices as well
crypto: pcrypt - Do not clear MAY_SLEEP flag in original request
crypto: atmel-aes - Fix counter overflow in CTR mode
crypto: api - Fix race condition in crypto_spawn_alg
crypto: picoxcell - adjust the position of tasklet_init and fix missed tasklet_kill
scsi: qla2xxx: Fix unbound NVME response length
NFS: Fix memory leaks and corruption in readdir
NFS: Directory page cache pages need to be locked when read
jbd2_seq_info_next should increase position index
Btrfs: fix missing hole after hole punching and fsync when using NO_HOLES
btrfs: set trans->drity in btrfs_commit_transaction
Btrfs: fix race between adding and putting tree mod seq elements and nodes
ARM: tegra: Enable PLLP bypass during Tegra124 LP1
iwlwifi: don't throw error when trying to remove IGTK
mwifiex: fix unbalanced locking in mwifiex_process_country_ie()
sunrpc: expiry_time should be seconds not timeval
gfs2: move setting current->backing_dev_info
gfs2: fix O_SYNC write handling
drm/rect: Avoid division by zero
media: rc: ensure lirc is initialized before registering input device
tools/kvm_stat: Fix kvm_exit filter name
xen/balloon: Support xend-based toolstack take two
watchdog: fix UAF in reboot notifier handling in watchdog core code
bcache: add readahead cache policy options via sysfs interface
eventfd: track eventfd_signal() recursion depth
aio: prevent potential eventfd recursion on poll
KVM: x86: Refactor picdev_write() to prevent Spectre-v1/L1TF attacks
KVM: x86: Refactor prefix decoding to prevent Spectre-v1/L1TF attacks
KVM: x86: Protect pmu_intel.c from Spectre-v1/L1TF attacks
KVM: x86: Protect DR-based index computations from Spectre-v1/L1TF attacks
KVM: x86: Protect kvm_lapic_reg_write() from Spectre-v1/L1TF attacks
KVM: x86: Protect kvm_hv_msr_[get|set]_crash_data() from Spectre-v1/L1TF attacks
KVM: x86: Protect ioapic_write_indirect() from Spectre-v1/L1TF attacks
KVM: x86: Protect MSR-based index computations in pmu.h from Spectre-v1/L1TF attacks
KVM: x86: Protect ioapic_read_indirect() from Spectre-v1/L1TF attacks
KVM: x86: Protect MSR-based index computations from Spectre-v1/L1TF attacks in x86.c
KVM: x86: Protect x86_decode_insn from Spectre-v1/L1TF attacks
KVM: x86: Protect MSR-based index computations in fixed_msr_to_seg_unit() from Spectre-v1/L1TF attacks
KVM: x86: Fix potential put_fpu() w/o load_fpu() on MPX platform
KVM: PPC: Book3S HV: Uninit vCPU if vcore creation fails
KVM: PPC: Book3S PR: Free shared page if mmu initialization fails
x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit
KVM: x86: Don't let userspace set host-reserved cr4 bits
KVM: x86: Free wbinvd_dirty_mask if vCPU creation fails
KVM: s390: do not clobber registers during guest reset/store status
clk: tegra: Mark fuse clock as critical
drm/amd/dm/mst: Ignore payload update failures
percpu: Separate decrypted varaibles anytime encryption can be enabled
scsi: qla2xxx: Fix the endianness of the qla82xx_get_fw_size() return type
scsi: csiostor: Adjust indentation in csio_device_reset
scsi: qla4xxx: Adjust indentation in qla4xxx_mem_free
scsi: ufs: Recheck bkops level if bkops is disabled
phy: qualcomm: Adjust indentation in read_poll_timeout
ext2: Adjust indentation in ext2_fill_super
powerpc/44x: Adjust indentation in ibm4xx_denali_fixup_memsize
drm: msm: mdp4: Adjust indentation in mdp4_dsi_encoder_enable
NFC: pn544: Adjust indentation in pn544_hci_check_presence
ppp: Adjust indentation into ppp_async_input
net: smc911x: Adjust indentation in smc911x_phy_configure
net: tulip: Adjust indentation in {dmfe, uli526x}_init_module
IB/mlx5: Fix outstanding_pi index for GSI qps
IB/core: Fix ODP get user pages flow
nfsd: fix delay timer on 32-bit architectures
nfsd: fix jiffies/time_t mixup in LRU list
nfsd: Return the correct number of bytes written to the file
ubi: fastmap: Fix inverted logic in seen selfcheck
ubi: Fix an error pointer dereference in error handling code
mfd: da9062: Fix watchdog compatible string
mfd: rn5t618: Mark ADC control register volatile
bonding/alb: properly access headers in bond_alb_xmit()
net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port
net: mvneta: move rx_dropped and rx_errors in per-cpu stats
net_sched: fix a resource leak in tcindex_set_parms()
net: systemport: Avoid RBUF stuck in Wake-on-LAN mode
net/mlx5: IPsec, Fix esp modify function attribute
net/mlx5: IPsec, fix memory leak at mlx5_fpga_ipsec_delete_sa_ctx
net: macb: Remove unnecessary alignment check for TSO
net: macb: Limit maximum GEM TX length in TSO
net: dsa: b53: Always use dev->vlan_enabled in b53_configure_vlan()
ext4: fix deadlock allocating crypto bounce page from mempool
btrfs: use bool argument in free_root_pointers()
btrfs: free block groups after free'ing fs trees
drm: atmel-hlcdc: enable clock before configuring timing engine
drm/dp_mst: Remove VCPI while disabling topology mgr
btrfs: flush write bio if we loop in extent_write_cache_pages
KVM: x86/mmu: Apply max PA check for MMIO sptes to 32-bit KVM
KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM
KVM: VMX: Add non-canonical check on writes to RTIT address MSRs
KVM: nVMX: vmread should not set rflags to specify success in case of #PF
KVM: Use vcpu-specific gva->hva translation when querying host page size
KVM: Play nice with read-only memslots when querying host page size
mm: zero remaining unavailable struct pages
mm: return zero_resv_unavail optimization
mm/page_alloc.c: fix uninitialized memmaps on a partially populated last section
cifs: fail i/o on soft mounts if sessionsetup errors out
x86/apic/msi: Plug non-maskable MSI affinity race
clocksource: Prevent double add_timer_on() for watchdog_timer
perf/core: Fix mlock accounting in perf_mmap()
rxrpc: Fix service call disconnection
Linux 4.19.103
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I0d7f09085c3541373e0fd6b2e3ffacc5e34f7d55
[ Upstream commit b39a934ec72fa2b5a74123891f25273a38378b90 ]
The recent patch that substituted a flag on an rxrpc_call for the
connection pointer being NULL as an indication that a call was disconnected
puts the set_bit in the wrong place for service calls. This is only a
problem if a call is implicitly terminated by a new call coming in on the
same connection channel instead of a terminating ACK packet.
In such a case, rxrpc_input_implicit_end_call() calls
__rxrpc_disconnect_call(), which is now (incorrectly) setting the
disconnection bit, meaning that when rxrpc_release_call() is later called,
it doesn't call rxrpc_disconnect_call() and so the call isn't removed from
the peer's error distribution list and the list gets corrupted.
KASAN finds the issue as an access after release on a call, but the
position at which it occurs is confusing as it appears to be related to a
different call (the call site is where the latter call is being removed
from the error distribution list and either the next or pprev pointer
points to a previously released call).
Fix this by moving the setting of the flag from __rxrpc_disconnect_call()
to rxrpc_disconnect_call() in the same place that the connection pointer
was being cleared.
Fixes: 5273a191dca6 ("rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 003461559ef7a9bd0239bae35a22ad8924d6e9ad upstream.
Decreasing sysctl_perf_event_mlock between two consecutive perf_mmap()s of
a perf ring buffer may lead to an integer underflow in locked memory
accounting. This may lead to the undesired behaviors, such as failures in
BPF map creation.
Address this by adjusting the accounting logic to take into account the
possibility that the amount of already locked memory may exceed the
current limit.
Fixes: c4b75479741c ("perf/core: Make the mlock accounting simple again")
Suggested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lkml.kernel.org/r/20200123181146.2238074-1-songliubraving@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit febac332a819f0e764aa4da62757ba21d18c182b upstream.
Kernel crashes inside QEMU/KVM are observed:
kernel BUG at kernel/time/timer.c:1154!
BUG_ON(timer_pending(timer) || !timer->function) in add_timer_on().
At the same time another cpu got:
general protection fault: 0000 [#1] SMP PTI of poinson pointer 0xdead000000000200 in:
__hlist_del at include/linux/list.h:681
(inlined by) detach_timer at kernel/time/timer.c:818
(inlined by) expire_timers at kernel/time/timer.c:1355
(inlined by) __run_timers at kernel/time/timer.c:1686
(inlined by) run_timer_softirq at kernel/time/timer.c:1699
Unfortunately kernel logs are badly scrambled, stacktraces are lost.
Printing the timer->function before the BUG_ON() pointed to
clocksource_watchdog().
The execution of clocksource_watchdog() can race with a sequence of
clocksource_stop_watchdog() .. clocksource_start_watchdog():
expire_timers()
detach_timer(timer, true);
timer->entry.pprev = NULL;
raw_spin_unlock_irq(&base->lock);
call_timer_fn
clocksource_watchdog()
clocksource_watchdog_kthread() or
clocksource_unbind()
spin_lock_irqsave(&watchdog_lock, flags);
clocksource_stop_watchdog();
del_timer(&watchdog_timer);
watchdog_running = 0;
spin_unlock_irqrestore(&watchdog_lock, flags);
spin_lock_irqsave(&watchdog_lock, flags);
clocksource_start_watchdog();
add_timer_on(&watchdog_timer, ...);
watchdog_running = 1;
spin_unlock_irqrestore(&watchdog_lock, flags);
spin_lock(&watchdog_lock);
add_timer_on(&watchdog_timer, ...);
BUG_ON(timer_pending(timer) || !timer->function);
timer_pending() -> true
BUG()
I.e. inside clocksource_watchdog() watchdog_timer could be already armed.
Check timer_pending() before calling add_timer_on(). This is sufficient as
all operations are synchronized by watchdog_lock.
Fixes: 75c5158f70 ("timekeeping: Update clocksource with stop_machine")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/158048693917.4378.13823603769948933793.stgit@buzz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f1a4891a5928a5969c87fa5a584844c983ec823 upstream.
Evan tracked down a subtle race between the update of the MSI message and
the device raising an interrupt internally on PCI devices which do not
support MSI masking. The update of the MSI message is non-atomic and
consists of either 2 or 3 sequential 32bit wide writes to the PCI config
space.
- Write address low 32bits
- Write address high 32bits (If supported by device)
- Write data
When an interrupt is migrated then both address and data might change, so
the kernel attempts to mask the MSI interrupt first. But for MSI masking is
optional, so there exist devices which do not provide it. That means that
if the device raises an interrupt internally between the writes then a MSI
message is sent built from half updated state.
On x86 this can lead to spurious interrupts on the wrong interrupt
vector when the affinity setting changes both address and data. As a
consequence the device interrupt can be lost causing the device to
become stuck or malfunctioning.
Evan tried to handle that by disabling MSI accross an MSI message
update. That's not feasible because disabling MSI has issues on its own:
If MSI is disabled the PCI device is routing an interrupt to the legacy
INTx mechanism. The INTx delivery can be disabled, but the disablement is
not working on all devices.
Some devices lose interrupts when both MSI and INTx delivery are disabled.
Another way to solve this would be to enforce the allocation of the same
vector on all CPUs in the system for this kind of screwed devices. That
could be done, but it would bring back the vector space exhaustion problems
which got solved a few years ago.
Fortunately the high address (if supported by the device) is only relevant
when X2APIC is enabled which implies interrupt remapping. In the interrupt
remapping case the affinity setting is happening at the interrupt remapping
unit and the PCI MSI message is programmed only once when the PCI device is
initialized.
That makes it possible to solve it with a two step update:
1) Target the MSI msg to the new vector on the current target CPU
2) Target the MSI msg to the new vector on the new target CPU
In both cases writing the MSI message is only changing a single 32bit word
which prevents the issue of inconsistency.
After writing the final destination it is necessary to check whether the
device issued an interrupt while the intermediate state #1 (new vector,
current CPU) was in effect.
This is possible because the affinity change is always happening on the
current target CPU. The code runs with interrupts disabled, so the
interrupt can be detected by checking the IRR of the local APIC. If the
vector is pending in the IRR then the interrupt is retriggered on the new
target CPU by sending an IPI for the associated vector on the target CPU.
This can cause spurious interrupts on both the local and the new target
CPU.
1) If the new vector is not in use on the local CPU and the device
affected by the affinity change raised an interrupt during the
transitional state (step #1 above) then interrupt entry code will
ignore that spurious interrupt. The vector is marked so that the
'No irq handler for vector' warning is supressed once.
2) If the new vector is in use already on the local CPU then the IRR check
might see an pending interrupt from the device which is using this
vector. The IPI to the new target CPU will then invoke the handler of
the device, which got the affinity change, even if that device did not
issue an interrupt
3) If the new vector is in use already on the local CPU and the device
affected by the affinity change raised an interrupt during the
transitional state (step #1 above) then the handler of the device which
uses that vector on the local CPU will be invoked.
expose issues in device driver interrupt handlers which are not prepared to
handle a spurious interrupt correctly. This not a regression, it's just
exposing something which was already broken as spurious interrupts can
happen for a lot of reasons and all driver handlers need to be able to deal
with them.
Reported-by: Evan Green <evgreen@chromium.org>
Debugged-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Evan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87imkr4s7n.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0dd940e582b6a60296b9847a54012a4b080dc72 upstream.
RHBZ: 1579050
If we have a soft mount we should fail commands for session-setup
failures (such as the password having changed/ account being deleted/ ...)
and return an error back to the application.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e822969cab48b786b64246aad1a3ba2a774f5d23 ]
Patch series "mm: fix max_pfn not falling on section boundary", v2.
Playing with different memory sizes for a x86-64 guest, I discovered that
some memmaps (highest section if max_mem does not fall on the section
boundary) are marked as being valid and online, but contain garbage. We
have to properly initialize these memmaps.
Looking at /proc/kpageflags and friends, I found some more issues,
partially related to this.
This patch (of 3):
If max_pfn is not aligned to a section boundary, we can easily run into
BUGs. This can e.g., be triggered on x86-64 under QEMU by specifying a
memory size that is not a multiple of 128MB (e.g., 4097MB, but also
4160MB). I was told that on real HW, we can easily have this scenario
(esp., one of the main reasons sub-section hotadd of devmem was added).
The issue is, that we have a valid memmap (pfn_valid()) for the whole
section, and the whole section will be marked "online".
pfn_to_online_page() will succeed, but the memmap contains garbage.
E.g., doing a "./page-types -r -a 0x144001" when QEMU was started with "-m
4160M" - (see tools/vm/page-types.c):
[ 200.476376] BUG: unable to handle page fault for address: fffffffffffffffe
[ 200.477500] #PF: supervisor read access in kernel mode
[ 200.478334] #PF: error_code(0x0000) - not-present page
[ 200.479076] PGD 59614067 P4D 59614067 PUD 59616067 PMD 0
[ 200.479557] Oops: 0000 [#4] SMP NOPTI
[ 200.479875] CPU: 0 PID: 603 Comm: page-types Tainted: G D W 5.5.0-rc1-next-20191209 #93
[ 200.480646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4
[ 200.481648] RIP: 0010:stable_page_flags+0x4d/0x410
[ 200.482061] Code: f3 ff 41 89 c0 48 b8 00 00 00 00 01 00 00 00 45 84 c0 0f 85 cd 02 00 00 48 8b 53 08 48 8b 2b 48f
[ 200.483644] RSP: 0018:ffffb139401cbe60 EFLAGS: 00010202
[ 200.484091] RAX: fffffffffffffffe RBX: fffffbeec5100040 RCX: 0000000000000000
[ 200.484697] RDX: 0000000000000001 RSI: ffffffff9535c7cd RDI: 0000000000000246
[ 200.485313] RBP: ffffffffffffffff R08: 0000000000000000 R09: 0000000000000000
[ 200.485917] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000144001
[ 200.486523] R13: 00007ffd6ba55f48 R14: 00007ffd6ba55f40 R15: ffffb139401cbf08
[ 200.487130] FS: 00007f68df717580(0000) GS:ffff9ec77fa00000(0000) knlGS:0000000000000000
[ 200.487804] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 200.488295] CR2: fffffffffffffffe CR3: 0000000135d48000 CR4: 00000000000006f0
[ 200.488897] Call Trace:
[ 200.489115] kpageflags_read+0xe9/0x140
[ 200.489447] proc_reg_read+0x3c/0x60
[ 200.489755] vfs_read+0xc2/0x170
[ 200.490037] ksys_pread64+0x65/0xa0
[ 200.490352] do_syscall_64+0x5c/0xa0
[ 200.490665] entry_SYSCALL_64_after_hwframe+0x49/0xbe
But it can be triggered much easier via "cat /proc/kpageflags > /dev/null"
after cold/hot plugging a DIMM to such a system:
[root@localhost ~]# cat /proc/kpageflags > /dev/null
[ 111.517275] BUG: unable to handle page fault for address: fffffffffffffffe
[ 111.517907] #PF: supervisor read access in kernel mode
[ 111.518333] #PF: error_code(0x0000) - not-present page
[ 111.518771] PGD a240e067 P4D a240e067 PUD a2410067 PMD 0
This patch fixes that by at least zero-ing out that memmap (so e.g.,
page_to_pfn() will not crash). Commit 907ec5fca3dc ("mm: zero remaining
unavailable struct pages") tried to fix a similar issue, but forgot to
consider this special case.
After this patch, there are still problems to solve. E.g., not all of
these pages falling into a memory hole will actually get initialized later
and set PageReserved - they are only zeroed out - but at least the
immediate crashes are gone. A follow-up patch will take care of this.
Link: http://lkml.kernel.org/r/20191211163201.17179-2-david@redhat.com
Fixes: f7f99100d8 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <stable@vger.kernel.org> [4.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec393a0f014eaf688a3dbe8c8a4cbb52d7f535f9 ]
When checking for valid pfns in zero_resv_unavail(), it is not necessary
to verify that pfns within pageblock_nr_pages ranges are valid, only the
first one needs to be checked. This is because memory for pages are
allocated in contiguous chunks that contain pageblock_nr_pages struct
pages.
Link: http://lkml.kernel.org/r/20181002143821.5112-3-msys.mizuma@gmail.com
Signed-off-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 907ec5fca3dc38d37737de826f06f25b063aa08e ]
Patch series "mm: Fix for movable_node boot option", v3.
This patch series contains a fix for the movable_node boot option issue
which was introduced by commit 124049decb ("x86/e820: put !E820_TYPE_RAM
regions into memblock.reserved").
The commit breaks the option because it changed the memory gap range to
reserved memblock. So, the node is marked as Normal zone even if the SRAT
has Hot pluggable affinity.
First and second patch fix the original issue which the commit tried to
fix, then revert the commit.
This patch (of 3):
There is a kernel panic that is triggered when reading /proc/kpageflags on
the kernel booted with kernel parameter 'memmap=nn[KMG]!ss[KMG]':
BUG: unable to handle kernel paging request at fffffffffffffffe
PGD 9b20e067 P4D 9b20e067 PUD 9b210067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 1728 Comm: page-types Not tainted 4.17.0-rc6-mm1-v4.17-rc6-180605-0816-00236-g2dfb086ef02c+ #160
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014
RIP: 0010:stable_page_flags+0x27/0x3c0
Code: 00 00 00 0f 1f 44 00 00 48 85 ff 0f 84 a0 03 00 00 41 54 55 49 89 fc 53 48 8b 57 08 48 8b 2f 48 8d 42 ff 83 e2 01 48 0f 44 c7 <48> 8b 00 f6 c4 01 0f 84 10 03 00 00 31 db 49 8b 54 24 08 4c 89 e7
RSP: 0018:ffffbbd44111fde0 EFLAGS: 00010202
RAX: fffffffffffffffe RBX: 00007fffffffeff9 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000202 RDI: ffffed1182fff5c0
RBP: ffffffffffffffff R08: 0000000000000001 R09: 0000000000000001
R10: ffffbbd44111fed8 R11: 0000000000000000 R12: ffffed1182fff5c0
R13: 00000000000bffd7 R14: 0000000002fff5c0 R15: ffffbbd44111ff10
FS: 00007efc4335a500(0000) GS:ffff93a5bfc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffffffffffffe CR3: 00000000b2a58000 CR4: 00000000001406e0
Call Trace:
kpageflags_read+0xc7/0x120
proc_reg_read+0x3c/0x60
__vfs_read+0x36/0x170
vfs_read+0x89/0x130
ksys_pread64+0x71/0x90
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7efc42e75e23
Code: 09 00 ba 9f 01 00 00 e8 ab 81 f4 ff 66 2e 0f 1f 84 00 00 00 00 00 90 83 3d 29 0a 2d 00 00 75 13 49 89 ca b8 11 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 db d3 01 00 48 89 04 24
According to kernel bisection, this problem became visible due to commit
f7f99100d8 which changes how struct pages are initialized.
Memblock layout affects the pfn ranges covered by node/zone. Consider
that we have a VM with 2 NUMA nodes and each node has 4GB memory, and the
default (no memmap= given) memblock layout is like below:
MEMBLOCK configuration:
memory size = 0x00000001fff75c00 reserved size = 0x000000000300c000
memory.cnt = 0x4
memory[0x0] [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0
memory[0x1] [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0
memory[0x2] [0x0000000100000000-0x000000013fffffff], 0x0000000040000000 bytes on node 0 flags: 0x0
memory[0x3] [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0
...
If you give memmap=1G!4G (so it just covers memory[0x2]),
the range [0x100000000-0x13fffffff] is gone:
MEMBLOCK configuration:
memory size = 0x00000001bff75c00 reserved size = 0x000000000300c000
memory.cnt = 0x3
memory[0x0] [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0
memory[0x1] [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0
memory[0x2] [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0
...
This causes shrinking node 0's pfn range because it is calculated by the
address range of memblock.memory. So some of struct pages in the gap
range are left uninitialized.
We have a function zero_resv_unavail() which does zeroing the struct pages
outside memblock.memory, but currently it covers only the reserved
unavailable range (i.e. memblock.memory && !memblock.reserved). This
patch extends it to cover all unavailable range, which fixes the reported
issue.
Link: http://lkml.kernel.org/r/20181002143821.5112-2-msys.mizuma@gmail.com
Fixes: f7f99100d8 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Tested-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42cde48b2d39772dba47e680781a32a6c4b7dc33 ]
Avoid the "writable" check in __gfn_to_hva_many(), which will always fail
on read-only memslots due to gfn_to_hva() assuming writes. Functionally,
this allows x86 to create large mappings for read-only memslots that
are backed by HugeTLB mappings.
Note, the changelog for commit 05da45583d ("KVM: MMU: large page
support") states "If the largepage contains write-protected pages, a
large pte is not used.", but "write-protected" refers to pages that are
temporarily read-only, e.g. read-only memslots didn't even exist at the
time.
Fixes: 4d8b81abc4 ("KVM: introduce readonly memslot")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Redone using kvm_vcpu_gfn_to_memslot_prot. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9b84e19221efc5f493156ee0329df3142085f28 ]
Use kvm_vcpu_gfn_to_hva() when retrieving the host page size so that the
correct set of memslots is used when handling x86 page faults in SMM.
Fixes: 54bf36aac5 ("KVM: x86: use vcpu-specific functions to read/write/translate GFNs")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4d956b9390418623ae5d07933e2679c68b6f83c ]
In case writing to vmread destination operand result in a #PF, vmread
should not call nested_vmx_succeed() to set rflags to specify success.
Similar to as done in VMPTRST (See handle_vmptrst()).
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe6ed369fca98e99df55c932b85782a5687526b5 ]
Reject writes to RTIT address MSRs if the data being written is a
non-canonical address as the MSRs are subject to canonical checks, e.g.
KVM will trigger an unchecked #GP when loading the values to hardware
during pt_guest_enter().
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 736c291c9f36b07f8889c61764c28edce20e715d ]
Convert a plethora of parameters and variables in the MMU and page fault
flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM.
Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical
addresses. When TDP is enabled, the fault address is a guest physical
address and thus can be a 64-bit value, even when both KVM and its guest
are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a
64-bit field, not a natural width field.
Using a gva_t for the fault address means KVM will incorrectly drop the
upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to
translate L2 GPAs to L1 GPAs.
Opportunistically rename variables and parameters to better reflect the
dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain
"addr" instead of "vaddr" when the address may be either a GVA or an L2
GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid
a confusing "gpa_t gva" declaration; this also sets the stage for a
future patch to combing nonpaging_page_fault() and tdp_page_fault() with
minimal churn.
Sprinkle in a few comments to document flows where an address is known
to be a GVA and thus can be safely truncated to a 32-bit value. Add
WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help
document such cases and detect bugs.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e30a7d623dccdb3f880fbcad980b0cb589a1da45 ]
Remove the bogus 64-bit only condition from the check that disables MMIO
spte optimization when the system supports the max PA, i.e. doesn't have
any reserved PA bits. 32-bit KVM always uses PAE paging for the shadow
MMU, and per Intel's SDM:
PAE paging translates 32-bit linear addresses to 52-bit physical
addresses.
The kernel's restrictions on max physical addresses are limits on how
much memory the kernel can reasonably use, not what physical addresses
are supported by hardware.
Fixes: ce88decffd ("KVM: MMU: mmio page fault support")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96bf313ecb33567af4cb53928b0c951254a02759 ]
There exists a deadlock with range_cyclic that has existed forever. If
we loop around with a bio already built we could deadlock with a writer
who has the page locked that we're attempting to write but is waiting on
a page in our bio to be written out. The task traces are as follows
PID: 1329874 TASK: ffff889ebcdf3800 CPU: 33 COMMAND: "kworker/u113:5"
#0 [ffffc900297bb658] __schedule at ffffffff81a4c33f
#1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3
#2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42
#3 [ffffc900297bb708] __lock_page at ffffffff811f145b
#4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502
#5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684
#6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff
#7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0
#8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2
#9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd
PID: 2167901 TASK: ffff889dc6a59c00 CPU: 14 COMMAND:
"aio-dio-invalid"
#0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f
#1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3
#2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42
#3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6
#4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7
#5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359
#6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933
#7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8
#8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d
#9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032
I used drgn to find the respective pages we were stuck on
page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901
page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874
As you can see the kworker is waiting for bit 0 (PG_locked) on index
7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index
8148. aio-dio-invalid has 7680, and the kworker epd looks like the
following
crash> struct extent_page_data ffffc900297bbbb0
struct extent_page_data {
bio = 0xffff889f747ed830,
tree = 0xffff889eed6ba448,
extent_locked = 0,
sync_io = 0
}
Probably worth mentioning as well that it waits for writeback of the
page to complete while holding a lock on it (at prepare_pages()).
Using drgn I walked the bio pages looking for page
0xffffea00fbfc7500 which is the one we're waiting for writeback on
bio = Object(prog, 'struct bio', address=0xffff889f747ed830)
for i in range(0, bio.bi_vcnt.value_()):
bv = bio.bi_io_vec[i]
if bv.bv_page.value_() == 0xffffea00fbfc7500:
print("FOUND IT")
which validated what I suspected.
The fix for this is simple, flush the epd before we loop back around to
the beginning of the file during writeout.
Fixes: b293f02e14 ("Btrfs: Add writepages support")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64e62bdf04ab8529f45ed0a85122c703035dec3a ]
[Why]
This patch is trying to address the issue observed when hotplug DP
daisy chain monitors.
e.g.
src-mstb-mstb-sst -> src (unplug) mstb-mstb-sst -> src-mstb-mstb-sst
(plug in again)
Once unplug a DP MST capable device, driver will call
drm_dp_mst_topology_mgr_set_mst() to disable MST. In this function,
it cleans data of topology manager while disabling mst_state. However,
it doesn't clean up the proposed_vcpis of topology manager.
If proposed_vcpi is not reset, once plug in MST daisy chain monitors
later, code will fail at checking port validation while trying to
allocate payloads.
When MST capable device is plugged in again and try to allocate
payloads by calling drm_dp_update_payload_part1(), this
function will iterate over all proposed virtual channels to see if
any proposed VCPI's num_slots is greater than 0. If any proposed
VCPI's num_slots is greater than 0 and the port which the
specific virtual channel directed to is not in the topology, code then
fails at the port validation. Since there are stale VCPI allocations
from the previous topology enablement in proposed_vcpi[], code will fail
at port validation and reurn EINVAL.
[How]
Clean up the data of stale proposed_vcpi[] and reset mgr->proposed_vcpis
to NULL while disabling mst in drm_dp_mst_topology_mgr_set_mst().
Changes since v1:
*Add on more details in commit message to describe the issue which the
patch is trying to fix
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
[added cc to stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205090043.7580-1-Wayne.Lin@amd.com
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c1fb9d86f6820abbfaa38a6836157c76ccb4e7b ]
Changing pixel clock source without having this clock source enabled
will block the timing engine and the next operations after (in this case
setting ATMEL_HLCDC_CFG(5) settings in atmel_hlcdc_crtc_mode_set_nofb()
will fail). It is recomended (although in datasheet this is not present)
to actually enabled pixel clock source before doing any changes on timing
enginge (only SAM9X60 datasheet specifies that the peripheral clock and
pixel clock must be enabled before using LCD controller).
Fixes: 1a396789f6 ("drm: add Atmel HLCDC Display Controller support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <stable@vger.kernel.org> # v4.0+
Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-3-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e19443da1941050b346f8fc4c368aa68413bc88 ]
Sometimes when running generic/475 we would trip the
WARN_ON(cache->reserved) check when free'ing the block groups on umount.
This is because sometimes we don't commit the transaction because of IO
errors and thus do not cleanup the tree logs until at umount time.
These blocks are still reserved until they are cleaned up, but they
aren't cleaned up until _after_ we do the free block groups work. Fix
this by moving the free after free'ing the fs roots, that way all of the
tree logs are cleaned up and we have a properly cleaned fs. A bunch of
loops of generic/475 confirmed this fixes the problem.
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4273eaff9b8d5e141113a5bdf9628c02acf3afe5 ]
We don't need int argument bool shall do in free_root_pointers(). And
rename the argument as it confused two people.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 547c556f4db7c09447ecf5f833ab6aaae0c5ab58 ]
ext4_writepages() on an encrypted file has to encrypt the data, but it
can't modify the pagecache pages in-place, so it encrypts the data into
bounce pages and writes those instead. All bounce pages are allocated
from a mempool using GFP_NOFS.
This is not correct use of a mempool, and it can deadlock. This is
because GFP_NOFS includes __GFP_DIRECT_RECLAIM, which enables the "never
fail" mode for mempool_alloc() where a failed allocation will fall back
to waiting for one of the preallocated elements in the pool.
But since this mode is used for all a bio's pages and not just the
first, it can deadlock waiting for pages already in the bio to be freed.
This deadlock can be reproduced by patching mempool_alloc() to pretend
that pool->alloc() always fails (so that it always falls back to the
preallocations), and then creating an encrypted file of size > 128 KiB.
Fix it by only using GFP_NOFS for the first page in the bio. For
subsequent pages just use GFP_NOWAIT, and if any of those fail, just
submit the bio and start a new one.
This will need to be fixed in f2fs too, but that's less straightforward.
Fixes: c9af28fdd4 ("ext4 crypto: don't let data integrity writebacks fail with ENOMEM")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20191231181149.47619-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df373702bc0f8f2d83980ea441e71639fc1efcf8 ]
b53_configure_vlan() is called by the bcm_sf2 driver upon setup and
indirectly through resume as well. During the initial setup, we are
guaranteed that dev->vlan_enabled is false, so there is no change in
behavior, however during suspend, we may have enabled VLANs before, so we
do want to restore that setting.
Fixes: dad8d7c6452b ("net: dsa: b53: Properly account for VLAN filtering")
Fixes: 967dd82ffc ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f822e9c4ffa511a5c681cf866287d9383a3b6f1b ]
GEM_MAX_TX_LEN currently resolves to 0x3FF8 for any IP version supporting
TSO with full 14bits of length field in payload descriptor. But an IP
errata causes false amba_error (bit 6 of ISR) when length in payload
descriptors is specified above 16387. The error occurs because the DMA
falsely concludes that there is not enough space in SRAM for incoming
payload. These errors were observed continuously under stress of large
packets using iperf on a version where SRAM was 16K for each queue. This
errata will be documented shortly and affects all versions since TSO
functionality was added. Hence limit the max length to 0x3FC0 (rounded).
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 41c1ef978c8d0259c6636e6d2d854777e92650eb ]
The IP TSO implementation does NOT require the length to be a
multiple of 8. That is only a requirement for UFO as per IP
documentation. Hence, exit macb_features_check function in the
beginning if the protocol is not UDP. Only when it is UDP,
proceed further to the alignment checks. Update comments to
reflect the same. Also remove dead code checking for protocol
TCP when calculating header length.
Fixes: 1629dd4f76 ("cadence: Add LSO support.")
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 08db2cf577487f5123aebcc2f913e0b8a2c14b43 ]
SA context is allocated at mlx5_fpga_ipsec_create_sa_ctx,
however the counterpart mlx5_fpga_ipsec_delete_sa_ctx function
nullifies sa_ctx pointer without freeing the memory allocated,
hence the memory leak.
Fix by free SA context when the SA is released.
Fixes: d6c4f0298c ("net/mlx5: Refactor accel IPSec code")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0dc2c534f17c05bed0622b37a744bc38b48ca88a ]
The function mlx5_fpga_esp_validate_xfrm_attrs is wrongly used
with negative negation as zero value indicates success but it
used as failure return value instead.
Fix by remove the unary not negation operator.
Fixes: 05564d0ae0 ("net/mlx5: Add flow-steering commands for FPGA IPSec implementation")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 263a425a482fc495d6d3f9a29b9103a664c38b69 ]
After a number of suspend and resume cycles, it is possible for the RBUF
to be stuck in Wake-on-LAN mode, despite the MPD enable bit being
cleared which instructed the RBUF to exit that mode.
Avoid creating that problematic condition by clearing the RX_EN and
TX_EN bits in the UniMAC prior to disable the Magic Packet Detector
logic which is guaranteed to make the RBUF exit Wake-on-LAN mode.
Fixes: 83e82f4c70 ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 52b5ae501c045010aeeb1d5ac0373ff161a88291 ]
Jakub noticed there is a potential resource leak in
tcindex_set_parms(): when tcindex_filter_result_init() fails
and it jumps to 'errout1' which doesn't release the memory
and resources allocated by tcindex_alloc_perfect_hash().
We should just jump to 'errout_alloc' which calls
tcindex_free_perfect_hash().
Fixes: b9a24bb76b ("net_sched: properly handle failure case of tcf_exts_init()")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c35947b8ff8acca33134ee39c31708233765c31a ]
Move rx_dropped and rx_errors counters in mvneta_pcpu_stats in order to
avoid possible races updating statistics
Fixes: 562e2f467e ("net: mvneta: Improve the buffer allocation method for SWBM")
Fixes: dc35a10f68 ("net: mvneta: bm: add support for hardware buffer management")
Fixes: c5aff18204 ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit de34d7084edd069dac5aa010cfe32bd8c4619fa6 ]
The 7445 switch clocking profiles do not allow us to run the IMP port at
2Gb/sec in a way that it is reliable and consistent. Make sure that the
setting is only applied to the 7278 family.
Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 38f88c45404293bbc027b956def6c10cbd45c616 ]
syzbot managed to send an IPX packet through bond_alb_xmit()
and af_packet and triggered a use-after-free.
First, bond_alb_xmit() was using ipx_hdr() helper to reach
the IPX header, but ipx_hdr() was using the transport offset
instead of the network offset. In the particular syzbot
report transport offset was 0xFFFF
This patch removes ipx_hdr() since it was only (mis)used from bonding.
Then we need to make sure IPv4/IPv6/IPX headers are pulled
in skb->head before dereferencing anything.
BUG: KASAN: use-after-free in bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
Read of size 2 at addr ffff8801ce56dfff by task syz-executor.2/18108
(if (ipx_hdr(skb)->ipx_checksum != IPX_NO_CHECKSUM) ...)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
[<ffffffff8441fc42>] __dump_stack lib/dump_stack.c:17 [inline]
[<ffffffff8441fc42>] dump_stack+0x14d/0x20b lib/dump_stack.c:53
[<ffffffff81a7dec4>] print_address_description+0x6f/0x20b mm/kasan/report.c:282
[<ffffffff81a7e0ec>] kasan_report_error mm/kasan/report.c:380 [inline]
[<ffffffff81a7e0ec>] kasan_report mm/kasan/report.c:438 [inline]
[<ffffffff81a7e0ec>] kasan_report.cold+0x8c/0x2a0 mm/kasan/report.c:422
[<ffffffff81a7dc4f>] __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:469
[<ffffffff82c8c00a>] bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
[<ffffffff82c60c74>] __bond_start_xmit drivers/net/bonding/bond_main.c:4199 [inline]
[<ffffffff82c60c74>] bond_start_xmit+0x4f4/0x1570 drivers/net/bonding/bond_main.c:4224
[<ffffffff83baa558>] __netdev_start_xmit include/linux/netdevice.h:4525 [inline]
[<ffffffff83baa558>] netdev_start_xmit include/linux/netdevice.h:4539 [inline]
[<ffffffff83baa558>] xmit_one net/core/dev.c:3611 [inline]
[<ffffffff83baa558>] dev_hard_start_xmit+0x168/0x910 net/core/dev.c:3627
[<ffffffff83bacf35>] __dev_queue_xmit+0x1f55/0x33b0 net/core/dev.c:4238
[<ffffffff83bae3a8>] dev_queue_xmit+0x18/0x20 net/core/dev.c:4278
[<ffffffff84339189>] packet_snd net/packet/af_packet.c:3226 [inline]
[<ffffffff84339189>] packet_sendmsg+0x4919/0x70b0 net/packet/af_packet.c:3252
[<ffffffff83b1ac0c>] sock_sendmsg_nosec net/socket.c:673 [inline]
[<ffffffff83b1ac0c>] sock_sendmsg+0x12c/0x160 net/socket.c:684
[<ffffffff83b1f5a2>] __sys_sendto+0x262/0x380 net/socket.c:1996
[<ffffffff83b1f700>] SYSC_sendto net/socket.c:2008 [inline]
[<ffffffff83b1f700>] SyS_sendto+0x40/0x60 net/socket.c:2004
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f3dc25c0118de03a00ddc88b61f7216854f534d upstream.
There is a bit which gets cleared after conversion.
Fixes: 9bb9e29c78 ("mfd: Add Ricoh RN5T618 PMIC core driver")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1112ba02ff1190ca9c15a912f9269e54b46d2d82 upstream.
The watchdog driver compatible is "dlg,da9062-watchdog" and not
"dlg,da9062-wdt". Therefore the mfd-core can't populate the of_node and
fwnode. As result the watchdog driver can't parse the devicetree.
Fixes: 9b40b030c4 ("mfd: da9062: Supply core driver")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d3805af279c93ef49a64701f35254676d709622 upstream.
If "seen_pebs = init_seen(ubi);" fails then "seen_pebs" is an error pointer
and we try to kfree() it which results in an Oops.
This patch re-arranges the error handling so now it only frees things
which have been allocated successfully.
Fixes: daef3dd1f0 ("UBI: Fastmap: Add self check to detect absent PEBs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef5aafb6e4e9942a28cd300bdcda21ce6cbaf045 upstream.
set_seen() sets the bit corresponding to the PEB number in the bitmap,
so when self_check_seen() wants to find PEBs that haven't been seen we
have to print the PEBs that have their bit cleared, not the ones which
have it set.
Fixes: 5d71afb008 ("ubi: Use bitmaps in Fastmap self-check code")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09a80f2aef06b7c86143f5c14efd3485e0d2c139 upstream.
We must allow for the fact that iov_iter_write() could have returned
a short write (e.g. if there was an ENOSPC issue).
Fixes: d890be159a "nfsd: Add I/O trace points in the NFSv4 write path"
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9594497f2c78993cb66b696122f7c65528ace985 upstream.
The nfsd4_blocked_lock->nbl_time timestamp is recorded in jiffies,
but then compared to a CLOCK_REALTIME timestamp later on, which makes
no sense.
For consistency with the other timestamps, change this to use a time_t.
This is a change in behavior, which may cause regressions, but the
current code is not sensible. On a system with CONFIG_HZ=1000,
the 'time_after((unsigned long)nbl->nbl_time, (unsigned long)cutoff))'
check is false for roughly the first 18 days of uptime and then true
for the next 49 days.
Fixes: 7919d0a27f ("nfsd: add a LRU list for blocked locks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2561c92b12f4f4e386d453556685f75775c0938b upstream.
The nfsd4_cb_layout_done() function takes a 'time_t' value,
multiplied by NSEC_PER_SEC*2 to get a nanosecond value.
This works fine on 64-bit architectures, but on 32-bit, any
value over 1 second results in a signed integer overflow
with unexpected results.
Cast one input to a 64-bit type in order to produce the
same result that we have on 64-bit architectures, regarless
of the type of nfsd4_lease.
Fixes: 6b9b21073d ("nfsd: give up on CB_LAYOUTRECALLs after two lease periods")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d07de8bd1709a80a282963ad7b2535148678a9e4 upstream.
The nr_pages argument of get_user_pages_remote() should always be in terms
of the system page size, not the MR page size. Use PAGE_SIZE instead of
umem_odp->page_shift.
Fixes: 403cd12e2c ("IB/umem: Add contiguous ODP support")
Link: https://lore.kernel.org/r/20191222124649.52300-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5671afe5e39ed71e94eae788bacdcceec69db09 upstream.
Commit b0ffeb537f ("IB/mlx5: Fix iteration overrun in GSI qps") changed
the way outstanding WRs are tracked for the GSI QP. But the fix did not
cover the case when a call to ib_post_send() fails and updates index to
track outstanding.
Since the prior commmit outstanding_pi should not be bounded otherwise the
loop generate_completions() will fail.
Fixes: b0ffeb537f ("IB/mlx5: Fix iteration overrun in GSI qps")
Link: https://lore.kernel.org/r/1576195889-23527-1-git-send-email-psajeepa@purestorage.com
Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe06bf3d83ef0d92f35a24e03297172e92ce9ce3 upstream.
Clang warns:
../drivers/net/ethernet/dec/tulip/uli526x.c:1812:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
switch (mode) {
^
../drivers/net/ethernet/dec/tulip/uli526x.c:1809:2: note: previous
statement is here
if (cr6set)
^
1 warning generated.
../drivers/net/ethernet/dec/tulip/dmfe.c:2217:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
switch(mode) {
^
../drivers/net/ethernet/dec/tulip/dmfe.c:2214:2: note: previous
statement is here
if (cr6set)
^
1 warning generated.
This warning occurs because there is a space before the tab on these
lines. Remove them so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
While we are here, adjust the default block in dmfe_init_module to have
a proper break between the label and assignment and add a space between
the switch and opening parentheses to avoid a checkpatch warning.
Fixes: e1c3e50140 ("[PATCH] initialisation cleanup for ULI526x-net-driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/795
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c61e223004b3b5c3f1dd25718e979bc17a3b12d upstream.
Clang warns:
../drivers/net/ethernet/smsc/smc911x.c:939:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
if (!lp->ctl_rfduplx)
^
../drivers/net/ethernet/smsc/smc911x.c:936:2: note: previous statement
is here
if (lp->ctl_rspeed != 100)
^
1 warning generated.
This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.
Fixes: 0a0c72c911 ("[PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips")
Link: https://github.com/ClangBuiltLinux/linux/issues/796
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08cbc75f96029d3092664213a844a5e25523aa35 upstream.
Clang warns:
../drivers/net/ppp/ppp_async.c:877:6: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
ap->rpkt = skb;
^
../drivers/net/ppp/ppp_async.c:875:5: note: previous statement is here
if (!skb)
^
1 warning generated.
This warning occurs because there is a space before the tab on this
line. Clean up this entire block's indentation so that it is consistent
with the Linux kernel coding style and clang no longer warns.
Fixes: 6722e78c90 ("[PPP]: handle misaligned accesses")
Link: https://github.com/ClangBuiltLinux/linux/issues/800
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5080832627b65e3772a35d1dced68c64e2b24442 upstream.
Clang warns
../drivers/nfc/pn544/pn544.c:696:4: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
return nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
^
../drivers/nfc/pn544/pn544.c:692:3: note: previous statement is here
if (target->nfcid1_len != 4 && target->nfcid1_len != 7 &&
^
1 warning generated.
This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.
Fixes: da052850b9 ("NFC: Add pn544 presence check for different targets")
Link: https://github.com/ClangBuiltLinux/linux/issues/814
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 251e3cb1418ff3f5061ee31335e346e852b16573 upstream.
Clang warns:
../drivers/gpu/drm/msm/disp/mdp4/mdp4_dsi_encoder.c:124:3: warning:
misleading indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
mdp4_crtc_set_config(encoder->crtc,
^
../drivers/gpu/drm/msm/disp/mdp4/mdp4_dsi_encoder.c:121:2: note:
previous statement is here
if (mdp4_dsi_encoder->enabled)
^
This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.
Fixes: 776638e73a ("drm/msm/dsi: Add a mdp4 encoder for DSI")
Link: https://github.com/ClangBuiltLinux/linux/issues/792
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3aae14e5d468d18dbb5d7c0c8c7e2968cc14aad upstream.
Clang warns:
../arch/powerpc/boot/4xx.c:231:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
val = SDRAM0_READ(DDR0_42);
^
../arch/powerpc/boot/4xx.c:227:2: note: previous statement is here
else
^
This is because there is a space at the beginning of this line; remove
it so that the indentation is consistent according to the Linux kernel
coding style and clang no longer warns.
Fixes: d23f509929 ("[POWERPC] 4xx: Adds decoding of 440SPE memory size to boot wrapper library")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/780
Link: https://lore.kernel.org/r/20191209200338.12546-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
