Commit graph

221 commits

Author SHA1 Message Date
Takashi Iwai
68cb2b5592 ALSA: Convert to new pm_ops for PCI drivers
Straightforward conversion to the new pm_ops from the legacy
suspend/resume ops.

Since we change vx222, vx_core and vxpocket have to be converted,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 08:23:03 +02:00
Clemens Ladisch
76bc7a0d0a ALSA: oxygen: add Xonar DGX support
Add the PCI ID of the Asus Xonar DGX card; it's otherwise
identical with the DG.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-05 14:24:12 +02:00
Takashi Iwai
e9f66d9b9c ALSA: pci: clean up using module_pci_driver()
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-24 12:25:00 +02:00
Clemens Ladisch
2492250e44 ALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs
The driver accidentally exchanged the left/right fields for stereo AC'97
mixer registers.  This affected only the aux and CD inputs because the
line input bypasses the AC'97 codec and the mic input is mono; cards
without AC'97 (Xonar DS/DG/HDAV Slim, HG2PCI, HiFier) were not affected.

Reported-and-tested-by: Abby Cedar <abbycedar@yahoo.com.au>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.31+ <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-08 09:46:37 +01:00
Clemens Ladisch
f0e48b6bd4 ALSA: virtuoso: Xonar DS: fix polarity of front output
The two DACs for the front output and the surround/center/LFE/back
outputs are wired up out of phase, so when channels are duplicated,
their sound can cancel out each other and result in a weaker bass
response.  To fix this, reverse the polarity of the neutron flow to
the front output.

Reported-any-tested-by: Daniel Hill <daniel@enemyplanet.geek.nz>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.34+ <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-16 12:19:55 +01:00
Clemens Ladisch
56225e4cc8 ALSA: virtuoso: add S/PDIF input support for all Xonars
All Xonar cards support S/PDIF input, but the cards without optical or
coaxial plugs have only undocumented pin connectors.  Support for the
ST/STX was already added in a previous patch; this adds support for the
D1/DX (JP2), DG (J5), DS (J5), and HDAV Slim (J12).

Many thanks to Zoltan Miklos for testing the DS and DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-11 09:24:50 +01:00
Rusty Russell
a67ff6a540 ALSA: module_param: make bool parameters really bool
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-19 10:34:41 +01:00
Paul Gortmaker
d81a6d7176 sound: Add export.h for THIS_MODULE/EXPORT_SYMBOL where needed
These aren't modules, but they do make use of these macros, so
they will need export.h to get that definition.  Previously,
they got it via the implicit module.h inclusion.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:22 -04:00
Paul Gortmaker
da155d5b40 sound: Add module.h to the previously silent sound users
Lots of sound drivers were getting module.h via the implicit presence
of it in <linux/device.h> but we are going to clean that up.  So
fix up those users now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:21 -04:00
Clemens Ladisch
dba8b46992 ALSA: mpu401: clean up interrupt specification
The semantics of snd_mpu401_uart_new()'s interrupt parameters are
somewhat counterintuitive:  To prevent the function from allocating its
own interrupt, either the irq number must be invalid, or the irq_flags
parameter must be zero.  At the same time, the irq parameter being
invalid specifies that the mpu401 code has to work without an interrupt
allocated by the caller.  This implies that, if there is an interrupt
and it is allocated by the caller, the irq parameter must be set to
a valid-looking number which then isn't actually used.

With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value,
which forces us to handle the parameters differently.

This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the
device interrupt is handled by the caller, and makes the allocation of
the interrupt to depend only on the irq parameter.  As suggested by
Takashi, the irq_flags parameter was dropped because, when used, it had
the constant value IRQF_DISABLED.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14 11:00:51 +02:00
Clemens Ladisch
dc3fcd1655 ALSA: virtuoso: fix Essence ST(X) S/PDIF input
On the Xonar Essence ST/STX, the connector J14 has been confirmed to be
a digital input, so enable it in the driver.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-15 13:35:14 +02:00
Clemens Ladisch
c81c6b356b ALSA: virtuoso: fix silent analog output on Xonar Essence ST Deluxe
Commit dd203fa97b (ALSA: virtuoso: remove non-working controls on
Essence ST Deluxe) made it impossible to adjust the volume after the
driver initialized it to muted.

Ensure that those DACs that can be accessed with I2C are initialized
to the same volume that is the reset default of the DAC without I2C.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.38+ <stable@kernel.org>
2011-07-18 09:39:50 +02:00
Clemens Ladisch
f4b1e98aa9 ALSA: firewire-speakers, oxygen, ua101: allow > 10 s periods
Since commit f2b3614cef (Don't check DMA time-out too shortly),
drivers need no longer restrict their PCM period length to be shorter
than 10 seconds.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-17 11:36:30 +02:00
Takashi Iwai
934c2b6d0c ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/*
The name argument of request_irq() appears in /proc/interrupts, and
it's quite ugly when the name entry contains a space or special letters.
In general, it's simpler and more readable when the module name appears
there, so let's replace all entries with KBUILD_MODNAME.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10 16:36:37 +02:00
Takashi Iwai
3733e424c4 ALSA: Use KBUILD_MODNAME for pci_driver.name entries
The convention for pci_driver.name entry in kernel drivers seem to be
the module name or equivalent ones.  But, so far, almost all PCI sound
drivers use more verbose name like "ABC Xyz (12)", and these are fairly
confusing when appearing as a file name.

This patch converts the all pci_driver.name entries in sound/pci/* to
use KBUILD_MODNAME for more unified appearance.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10 16:20:20 +02:00
Clemens Ladisch
efbeb07181 ALSA: oxygen: fix output routing on Xonar DG
This card uses separate I2S outputs for the front speakers and
headphones, and reverses the order of the three speaker outputs.
To work around this, add a model-specific callback to adjust the
controller's playback routing.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-31 12:00:02 +01:00
Jesper Juhl
233d84c46c ALSA: Xonar, CS43xx: Don't overrun static array
'cs4398_regs' in 'struct xonar_cs43xx' is an array of 'u8' with a size of
8. So, this code in sound/pci/oxygen/xonar_cs43xx.c::dump_d1_registers()

    		for (i = 2; i <= 8; ++i)
	  			snd_iprintf(buffer, " %02x", data->cs4398_regs[i]);

will overrun the array when 'i == 8'.

I guess that what's needed to fix it is the trivial patch below, but I
must admit that I have no idea about this code, so I may very well be
wrong. Additionally, I have no way to actually test this, so all I know is
that the below compiles. Someone who actually knows this code should take
a look before anything is comitted - consider the below (not much more
than) a bug report.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Clemens Ladisch <clemens@ladisch.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-22 17:24:30 +01:00
Clemens Ladisch
f8fe80e438 ALSA: oxygen: Xonar DG: fix CS4245 register writes
Accidentally exchanging register addresses and register values leads to
many strange errors ...

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-14 09:50:01 +01:00
Clemens Ladisch
c386735264 ALSA: oxygen: fix Xonar DG input
Apparently, this card uses the other I2S input.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-12 08:32:44 +01:00
Clemens Ladisch
d1d7093f3f ALSA: oxygen: add S/PDIF source selection for Claro cards
Add a mixer control to switch between the optical and coaxial S/PDIF
inputs on the HT-Omega Claro and Claro halo cards.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-11 17:54:15 +01:00
Clemens Ladisch
5fc5152474 ALSA: oxygen: fix CD/MIDI for X-Meridian (2G)
Enable the X-Meridian's CD input and the X-Meridian 2G's potential
MIDI ports.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-11 17:54:11 +01:00
Stephen Rothwell
e92d457514 ALSA: include delay.h for msleep in Xonar DG support
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-11 07:38:42 +01:00
Clemens Ladisch
a4b1696916 ALSA: oxygen: add some card names
Instead of the generic Oxygen, use the actual card name, if known.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:47:28 +01:00
Clemens Ladisch
a1f80fcfd5 ALSA: oxygen: do not show chip revision in card longname
Apparently, the revision is 2 on all sold sound cards, so this
information is not actually useful.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:47:24 +01:00
Clemens Ladisch
64878dfbf7 ALSA: oxygen: X-Meridian: add S/PDIF source selection
Add a mixer control to select between the on-board and extension board
S/PDIF inputs for the X-Meridian (2G).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:47:21 +01:00
Clemens Ladisch
860cffd57a ALSA: oxygen: add digital input validity check switch
Add a mixer control to prevent capturing S/PDIF samples that are not
marked as valid (non-audio or corrupted samples).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:47:17 +01:00
Clemens Ladisch
9600732b6c ALSA: core, oxygen, virtuoso: add an enum control info helper
Introduce the helper function snd_ctl_enum_info() to fill out the
elem_info fields for an enumerated control.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:53 +01:00
Clemens Ladisch
b532d6b8d3 ALSA: virtuoso: add Xonar HDAV1.3 Slim support
Add experimental support for the Asus Xonar HDAV1.3 Slim sound card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:49 +01:00
Clemens Ladisch
66410bfdf1 ALSA: oxygen: add Xonar DG support
Add experimental support for the Asus Xonar DG sound card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:46 +01:00
Clemens Ladisch
8443d2eb81 ALSA: oxygen: add X-Meridian 2G support
Add support for the AuzenTech X-Meridian 7.1 2G sound card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:42 +01:00
Clemens Ladisch
8c50b75979 ALSA: oxygen: add more PCI IDs
Add PCI IDs for some unknown models.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:38 +01:00
Clemens Ladisch
ce2c492090 ALSA: virtuoso: reduce MCLK in double rate modes
For the CSxxxx and AKxxxx DAC/ADC chips, the MCLK factor in double rate
modes (64-96 kHz) can be reduced to 128x without reducing sound quality.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:35 +01:00
Clemens Ladisch
5b8bf2a54f ALSA: oxygen: simplify model-specific MCLK handling
Replace the get_i2s_mclk callback with tables of MCLK values.  This
simplifies the MCLK-handling code in both the framework and the model-
specific drivers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:31 +01:00
Clemens Ladisch
bc29e262c3 ALSA: virtuoso: use headphone gain setting only on front DAC
Do not apply the headphone gain offset to any but the front DAC.  These
DACs would not be used in headphone mode, so this saves a few register
writes.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:28 +01:00
Clemens Ladisch
c97e2dc484 ALSA: virtuoso: handle DAC oversampling automatically
Remove the DAC Oversampling mixer control because this setting does not
make much sense.

For cards with the H6 daughterboard, 128x oversampling was disabled
anyway because these high MCLK frequency would not be compatible with
the connector cable.

For cards without the H6 daughterboard, 128x gives a slightly higher
output quality; there is no reason to reduce it to 64x except for saving
power, but then these cards have not been designed to be power efficient
anyway (the D2's blinkenlights cannot be disabled).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:24 +01:00
Clemens Ladisch
00b8dd7dd7 ALSA: virtuoso: use lower master clock with H6 daughterboard
Because of the unshielded connector cable, it is important to use as low
a master clock frequency as possible with the H6.

For double rate modes (64-96 kHz), the MCLK rate is unconditionally
lowered from 512x to 256x because the higher rate would not improve
anything.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:21 +01:00
Clemens Ladisch
d353eaa9a8 ALSA: virtuoso: configure correct master clock frequency on the CS2000
The clock output of the CS2000, which is used as master clock for the
DACs, was using half the actual master clock frequency for some reason.
Using the theoretically correct frequency seems also to work in practice.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:17 +01:00
Clemens Ladisch
dd203fa97b ALSA: virtuoso: remove non-working controls on Essence ST Deluxe
On the Xonar Essence ST Deluxe, remove all mixer controls that would
require I2C communication with the third DAC, which does not work
because of an addressing conflict with the CS2000 chip.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:14 +01:00
Clemens Ladisch
03ff959dd4 ALSA: virtuoso: change PCM1796 format to I2S
Change the PCM format used for the PCM1796 from left-justified to I2S to
ensure that the correct format is used even for the Essence ST Deluxe's
center/LFE DAC, where I2C does not work because of an address conflict
with the CS2000 chip.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:10 +01:00
Clemens Ladisch
79815e004c ALSA: virtuoso: wait for PCM1796 clock to become stable
The PCM1796 needs the master clock for I2C communication to work, so
add delays after clock changes to ensure that the clock is stable when
we try to write the DACs' registers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:07 +01:00
Clemens Ladisch
4106055ced ALSA: virtuoso: do not use fast I2C speed
To make the I2C communication reliable when using the H6 daughterboard,
reduce the I2C clock frequency.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:03 +01:00
Clemens Ladisch
5ea310ff8d ALSA: oxygen: fix SPI clocks slower than 6.25 MHz
Fix wrong register bits for SPI clock cycle times longer than 160 ns,
and adjust the polling loop timeout for these speeds.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:00 +01:00
Clemens Ladisch
d2119c05e9 ALSA: oxygen: remove oxygen_model::private_data field
The number of DACs can now be deduced from the dac_channels_mixer field,
so the private_data field is no longer needed.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:45:56 +01:00
Clemens Ladisch
1f4d7be729 ALSA: oxygen: allow different number of PCM and mixer channels
For cards like the Xonar HDAV1.3, differentiate between the number of
PCM channels that can be played and the number of channels whose volume
can be adjusted.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:45:53 +01:00
Takashi Iwai
354d14b3f5 Merge branch 'topic/workq-update' into topic/misc 2010-12-13 09:29:52 +01:00
Tejun Heo
5b84ba26a9 sound: don't use flush_scheduled_work()
flush_scheduled_work() is deprecated and scheduled to be removed.

* cancel[_delayed]_work() + flush_scheduled_work() ->
  cancel[_delayed]_work_sync().

* wm8350, wm8753 and soc-core use custom code to cancel a delayed
  work, execute it immediately if it was pending and wait for its
  completion.  This is equivalent to flush_delayed_work_sync().  Use
  it instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-13 09:22:44 +01:00
Clemens Ladisch
de66493693 ALSA: oxygen: update hardware comments
Reformat and update the comments that describe the hardware connections
on the various models.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06 14:48:43 +01:00
Clemens Ladisch
e2943efa4f ALSA: oxygen: show correct package ID
Instead of the hardcoded "CMI8788", show the actual chip name.

Note: This is neither what the chip is (it's always the same),
      nor what the chip is actually called.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06 14:48:34 +01:00
Clemens Ladisch
9719fcaa6a ALSA: oxygen: allow to dump codec registers
To help with debugging, add the registers of the model-specific
codecs to the controller and AC97 register dump in the proc file.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06 14:48:15 +01:00
Clemens Ladisch
e96f38f732 ALSA: virtuoso: fix front panel routing for D1/DX/ST(X)
The "Front Panel" switch on the Xonar D1/DX actually switches only the
output direction, so mark it appropriately.

The front panel microphone is controlled by the FMIC2MIC bit of the
CM9780.  It was unconditionally enabled on the D1/DX and never set on
the ST(X); add a control for it.  Selecting the front panel microphone
as source does not actually disable the microphone jack, but this is
bug-compatible with the Windows driver, and users rely on it.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06 14:48:08 +01:00