The current code to generate usb modaliases from usb_device_id assumes
that the device's bcdDevice descriptor will actually be in BCD format.
While this should be a sane assumption, some devices don't follow spec
and just use plain old hex. This causes drivers for these devices to
generate invalid modalias lines which will never actually match for the
hardware.
The following patch adds hex support for bcdDevice in file2alias.c by
detecting when a driver uses a hex formatted bcdDevice_(lo|hi) and
adjusts the output to hex format accordingly.
Drivers for devices which have bcdDevice conforming to BCD will have no
change in modalias output. Drivers for devices which don't conform
(i.e. ibmcam) should now generate valid modaliases.
EXAMPLE OUTPUT (ibmcam; space added to highlight change)
Old: usb:v0545p800D d030[10-9] dc*dsc*dp*ic*isc*ip*
New: usb:v0545p800D d030a dc*dsc*dp*ic*isc*ip*
Signed-off-by: Nathaniel McCallum <nathaniel@natemccallum.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This makes it consistent with other buses (platform, i2c, vio, ...). I'm
not sure why we use the prefixes, but there must be a reason.
This was easy enough to do it, and I did it.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Samuel Ortiz <sameo@openedhand.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Acked-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With this patch spi drivers can use standard spi_driver.id_table and
MODULE_DEVICE_TABLE() mechanisms to bind against the devices. Just like
we do with I2C drivers.
This is useful when a single driver supports several variants of devices
but it is not possible to detect them in run-time (like non-JEDEC chips
probing in drivers/mtd/devices/m25p80.c), and when platform_data usage is
overkill.
This patch also makes life a lot easier on OpenFirmware platforms, since
with OF we extensively use proper device IDs in modaliases.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ignore drivers/staging/ since it is very likely that new drivers
introduce it again.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (53 commits)
.gitignore: ignore *.lzma files
kbuild: add generic --set-str option to scripts/config
kbuild: simplify argument loop in scripts/config
kbuild: handle non-existing options in scripts/config
kallsyms: generalize text region handling
kallsyms: support kernel symbols in Blackfin on-chip memory
documentation: make version fix
kbuild: fix a compile warning
gitignore: Add GNU GLOBAL files to top .gitignore
kbuild: fix delay in setlocalversion on readonly source
README: fix misleading pointer to the defconf directory
vmlinux.lds.h update
kernel-doc: cleanup perl script
Improve vmlinux.lds.h support for arch specific linker scripts
kbuild: fix headers_exports with boolean expression
kbuild/headers_check: refine extern check
kbuild: fix "Argument list too long" error for "make headers_check",
ignore *.patch files
Remove bashisms from scripts
menu: fix embedded menu presentation
...
This patch allows a virtio driver to use VIRTIO_DEV_ANY_ID for the
device id. This will be used by a test module that can be bound to
any virtio device.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- add .init.rodata to INIT_DATA, and group all initconst flavors
together
- move strings generated from __setup_param() into .init.rodata
- add .*init.rodata to modpost's sets of init sections
- make modpost warn about references between meminit and cpuinit
as well as memexit and cpuexit sections (as CPU and memory
hotplug are independently selectable features)
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
mips emit the following debug sections:
.mdebug* and .pdr
They were included in the check for non-allocatable section
and caused modpost to warn.
Manuel Lauss suggested to fix this by adding the relevant
sections to the list of sections we do not check.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Jean reported that he saw one warning for each module like the one below:
WARNING: arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.o (.comment.SUSE.OPTs): unexpected non-allocatable section.
The warning appeared with the improved version of the
check of the flags in the sections.
That check already ignored sections named ".comment" - but SUSE store
additional info in the comment section and has named it in a SUSE
specific way. Therefore modpost failed to ignore the section.
The fix is to extend the pattern so we ignore all sections
that start with the name ".comment.".
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Jean Delvare <khali@linux-fr.org>
The missing TO_NATIVE(sechdrs[i].sh_flags) was causing many
unexpected non-allocatable section warnings when cross-compiling
for an architecture with a different endianness.
Fix endianness of all the fields in the ELF header and
section headers, not just some of them so we are not
hit by this anohter time.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Reported-by: Sean MacLennan <smaclennan@pikatech.com>
Tested-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When you put
.section ".foo"
in an assembly file instead of
.section "foo", "ax"
, one of the possible symptoms is that modpost will see an
ld-generated section name ".foo.1" in section_rel() or section_rela().
But this heuristic has two problems: it will miss a bad section that
has no relocations, and it will incorrectly flag many gcc-generated
sections as bad when compiling with -ffunction-sections
-fdata-sections.
On mips it fixes a lot of bogus warnings with gcc 4.4.0 lije this one:
WARNING: crypto/cryptd.o (.text.T.349): unexpected section name.
So instead of checking whether the section name matches a particular
pattern, we directly check for a missing SHF_ALLOC in the section
flags.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
There is some confusion on naming of the head section.
Correct naming is .head.text.
Fix comment so we use correct naming.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
While building the kernel, we end-up calling modpost with -K and -M
options for the same file (Modules.markers). This is resulting in
modpost's main function calling read_markers() and then write_markers() on
the same file.
We then have read_markers() mmap'ing the file, and writer_markers()
opening that same file for writing.
The issue is that read_markers() exits without munmap'ing the file and is
as a matter holding a reference on Modules.markers. When write_markers()
is opening that very same file for writing, we still have a reference on
it and cygwin (Windows?) is then making fopen() fail with EPERM.
Calling release_file() before exiting read_markers() clears that reference
(and memory leak) and fopen() then succeeds.
Tested on both cygwin (1.3.22) and Linux. Also ran modpost within
valgrind on Linux to make sure that the munmap'ed file was not accessed
after read_markers()
Signed-off-by: Cedric Hombourger <chombourger@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The old refok sections
.text.init.refok
.data.init.refok
.exit.text.refok
have been deprecated since commit
312b1485fb. After the other patches in
this patch series nothing is put in these sections, so clean things up
by eliminating all the remaining references to them.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
new_module() itself already calls strdup() on its modname parameter.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
With CONFIG_MODVERSIONS, we version 'struct module' using a dummy
export, but other things matter too:
1) 'struct modversion_info' determines the layout of the __versions section,
2) 'struct kernel_param' determines the layout of the __params section,
3) 'struct kernel_symbol' determines __ksymtab*.
4) 'struct marker' determines __markers.
5) 'struct tracepoint' determines __tracepoints.
So we rename 'struct_module' to 'module_layout' and include these in
the signature. Now it's general we can add others later on without
confusion.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now platform_device is being widely used on SoC processors where the
peripherals are attached to the system bus, which is simple enough.
However, silicon IPs for these SoCs are usually shared heavily across
a family of processors, even products from different companies. This
makes the original simple driver name based matching insufficient, or
simply not straight-forward.
Introduce a module id table for platform devices, and makes it clear
that a platform driver is able to support some shared IP and handle
slight differences across different platforms (by 'driver_data').
Module alias is handled automatically when a MODULE_DEVICE_TABLE()
is defined.
To not disturb the current platform drivers too much, the matched id
entry is recorded and can be retrieved by platform_get_device_id().
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix endianness of bus member of hid_device_id in modpost.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reported-by: Nye Liu <nyet@mrv.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Impact: fix link failure on certain toolchains with specific configs
Recent percpu change made x86_64 split .data.init section into three
separate segments - data.init, percpu and data.init2. data.init2 gets
.data.nosave and .bss.* and is followed by .notes segment. Depending
on configuration both segments might contain no data, in which case
the tool chain makes the section header to contain offset beyond the
end of the file.
modpost isn't too happy about it and fails build - as reported by
Pawel Dziekonski:
Building modules, stage 2.
MODPOST 416 modules
FATAL: vmlinux is truncated. sechdrs[i].sh_offset=10354688 >
sizeof(*hrd)=64
make[1]: *** [__modpost] Error 1
Teach modpost that NOBITS section may point beyond the end of the file
and that .modinfo can't be NOBITS.
Reported-by: Pawel Dziekonski <dzieko@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Based on a patch from Brian, who identified the issue.
Signed-off-by: Bryan Kadzban <bryan@kadzban.is-a-geek.net>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes a compile time warning which occurs whenever a static library
is linked into a kernel module. MODPOST tries to look for a
".<modulename>.cmd" file to look for its dependencies, but that file
doesn't exist or get generated for static libraries.
This patch prevents modpost from looking for a .cmd file when a module is
linked with a static library
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Ashutosh Naik <ashutosh.naik@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This makes modpost handle MODULE_DEVICE_TABLE(dmi, xxxx).
I had to change the string pointers in the match table to char arrays,
and picked a size of 79 bytes almost at random -- do we need to make it
bigger than that? I was a bit concerned about the 'bloat' this
introduces into the match tables, but they should all be __initdata so
it shouldn't matter too much.
(Actually, modpost does go through the relocations and look at most of
them; it wouldn't be impossible to make it handle string pointers -- but
doesn't seem to be worth the effort, since they're __initdata).
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
We need to add a flag for all code that is in the drivers/staging/
directory to prevent all other kernel developers from worrying about
issues here, and to notify users that the drivers might not be as good
as they are normally used to.
Based on code from Andreas Gruenbacher and Jeff Mahoney to provide a
TAINT flag for the support level of a kernel module in the Novell
enterprise kernel release.
This is the code that actually modifies the modules, adding the flag to
any files in the drivers/staging directory.
Cc: Andreas Gruenbacher <agruen@suse.de>
Cc: Jeff Mahoney <jeffm@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Theodore Ts'o (tytso@mit.edu) wrote:
>
> I've been playing with adding some markers into ext4 to see if they
> could be useful in solving some problems along with Systemtap. It
> appears, though, that as of 2.6.27-rc8, markers defined in code which is
> compiled directly into the kernel (i.e., not as modules) don't show up
> in Module.markers:
>
> kvm_trace_entryexit arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u
> kvm_trace_entryexit arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u
>
> (Note the lack of any of the kernel_sched_* markers, and the markers I
> added for ext4_* and jbd2_* are missing as wel.)
>
> Systemtap apparently depends on in-kernel trace_mark being recorded in
> Module.markers, and apparently it's been claimed that it used to be
> there. Is this a bug in systemtap, or in how Module.markers is getting
> built? And is there a file that contains the equivalent information
> for markers located in non-modules code?
I think the problem comes from "markers: fix duplicate modpost entry"
(commit d35cb360c2)
Especially :
- add_marker(mod, marker, fmt);
+ if (!mod->skip)
+ add_marker(mod, marker, fmt);
}
return;
fail:
Here is a fix that should take care if this problem.
Thanks for the bug report!
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Tested-by: "Theodore Ts'o" <tytso@mit.edu>
CC: Greg KH <greg@kroah.com>
CC: David Smith <dsmith@redhat.com>
CC: Roland McGrath <roland@redhat.com>
CC: Sam Ravnborg <sam@ravnborg.org>
CC: Wenji Huang <wenji.huang@oracle.com>
CC: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With 22454cb99f we added only the
first entry of the device table. We need to loop over the whole
device list.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Spelling fixes in scripts/mod/modpost.c
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trying to compile the v850 port brings many compile errors, one of them exists
since at least kernel 2.6.19.
There also seems to be noone willing to bring this port back into a usable
state.
This patch therefore removes the v850 port.
If anyone ever decides to revive the v850 port the code will still be
available from older kernels, and it wouldn't be impossible for the port to
reenter the kernel if it would become actively maintained again.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (79 commits)
arm: bus_id -> dev_name() and dev_set_name() conversions
sparc64: fix up bus_id changes in sparc core code
3c59x: handle pci_name() being const
MTD: handle pci_name() being const
HP iLO driver
sysdev: Convert the x86 mce tolerant sysdev attribute to generic attribute
sysdev: Add utility functions for simple int/ulong variable sysdev attributes
sysdev: Pass the attribute to the low level sysdev show/store function
driver core: Suppress sysfs warnings for device_rename().
kobject: Transmit return value of call_usermodehelper() to caller
sysfs-rules.txt: reword API stability statement
debugfs: Implement debugfs_remove_recursive()
HOWTO: change email addresses of James in HOWTO
always enable FW_LOADER unless EMBEDDED=y
uio-howto.tmpl: use unique output names
uio-howto.tmpl: use standard copyright/legal markings
sysfs: don't call notify_change
sysdev: fix debugging statements in registration code.
kobject: should use kobject_put() in kset-example
kobject: reorder kobject to save space on 64 bit builds
...
When a kernel was rebuilt, the previous Module.markers was not cleared.
It caused markers with different format strings to appear as duplicates
when a markers was changed. This problem is present since
scripts/mod/modpost.c started to generate Module.markers, commit
b2e3e658b3
It therefore applies to 2.6.25, 2.6.26 and linux-next.
I merely merged the patches from Roland, Wenji and Takashi here.
Credits to
Roland McGrath <roland@redhat.com>
Wenji Huang <wenji.huang@oracle.com>
and
Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
for providing the individual fixes.
- Changelog :
- Integrated Takashi's Makefile modification to clear Module.markers upon
make clean.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Roland McGrath <roland@redhat.com>
Cc: Wenji Huang <wenji.huang@oracle.com>
Cc: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Along with the non-modalias conformant "pnp:*" aliases, we add "acpi:*"
entries to PNP drivers, to allow module autoloading by ACPI PNP device
entries, which export proper modalias information, without any specific
userspace modprobe mangling.
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add modalias and subchannel type attributes for all subchannels.
I/O subchannel specific attributes are now created in
io_subchannel_probe(). modalias and subchannel type are also
added to the uevent for the css bus. Also make the css modalias
known.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Kumar Gala <galak@kernel.crashing.org> wrote:
We have a case in powerpc in which we want to link some library
routines with all module objects. The routines are intended for
handling out-of-line function call register save/restore so having
them as EXPORT_SYMBOL() is counter productive (we do also need to
link the same "library" code into the kernel).
Without this patch a powerpc build would error out and fail
to build modules with the added register save/restore module.
There were two obvious solutions:
1) To link the .o file before the modpost stage
2) To ignore the symbols in modpost
Option 1) was ruled out because we do not have any separate
linking stage for single file modules.
This patch implements option 2 - and do so only for powerpc.
The symbols we ignore are all undefined symbols named:
_restgpr_*, _savegpr_*, _rest32gpr_*, _save32gpr_*
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Disable modpost warnings for linkonce sections
My build gives lots of warnings like
WARNING: sound/core/snd.o (.gnu.linkonce.wi.mpspec_def.h.30779716): unexpected section name.
The (.[number]+) following section name are ld generated and not expected.
Did you forget to use "ax"/"aw" in a .S file?
Note that for example <linux/init.h> contains
section definitions for use in .S files.
But for .linkonce. duplicated sections are actually ok and expected.
So just disable the warning for this case.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Not all device types need a wildcard at the end of their module
aliases. In particular, for i2c module aliases, the trailing wildcard
is not only unneeded, it could also cause the wrong driver to be
loaded.
As I2C devices have no IDs, i2c module aliases are simple, arbitrary
device names. For example:
$ /sbin/modinfo lm90
filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko
author: Jean Delvare <khali@linux-fr.org>
description: LM90/ADM1032 driver
license: GPL
vermagic: 2.6.25-git18 mod_unload
depends: hwmon
alias: i2c:lm90*
alias: i2c:adm1032*
alias: i2c:lm99*
alias: i2c:lm86*
alias: i2c:max6657*
alias: i2c:adt7461*
alias: i2c:max6680*
$
This would cause trouble if one I2C chip name matches the beginning of
another I2C chip name and both chips are supported by different
drivers. For example, an i2c device named lm9042 would cause the lm90
driver to be loaded, while it doesn't support that device. This case
has yet to be seen in practice, but still, I'd like to fix it now. The
cleanest fix is to remove the trailing wildcard from i2c module aliases.
Here's a patch doing this.
Not all device type aliases need a trailing wildcard, in particular
the i2c aliases don't. Don't add a wildcard by default in do_table(),
instead let each device type handler add it if needed.
I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci,
pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of,
vio, parisc, sdio and virtio) are untested.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Based on earlier work by Jon Smirl and Jochen Friedrich.
This patch allows new-style i2c chip drivers to have alias names using
the official kernel aliasing system and MODULE_DEVICE_TABLE(). At this
point, the old i2c driver binding scheme (driver_name/type) is still
supported.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jochen Friedrich <jochen@scram.de>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Only modules that has other MODULE_* content
shall have the MODULE_LICENSE() tag.
This fixes allmodconfig build on my box.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This patch adds a new command line option -E to modpost, expecting a symbol
file as an argument which is read prior to symbol processing. -E can be
supplied multiple times for as many files as is needed.
When building kernel modules that depend on other modules not in the main
kernel tree, modpost complains about undefined symbols:
# make -C /path/to/linux/kernel M=/path/to/my/module
...
Building modules, stage 2.
....
WARNING: "rt_copy_buf" [/home/rich/osc_etl_rtw/osc_kmod.ko] undefined!
...etc
This situation occurs when modpost processes the new module's symbols. When
it finds symbols not exported by the mainline kernel, it issues this warning.
The patch adds a new command line option -e to modpost which expects a symbol
file as an argument. The symbols listed in this file are added to modpost's
symbol tables during startup. -e can be supplied as often as required.
This patch works together with the second patch. It introduces a new make
variable, KBUILD_EXTRA_SYMBOLS, which is used when calling modpost.
Signed-off-by: Richard Hacker <lerichi@gmx.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Adrian Bunk suggested a build time check for
missing MODULE_LICENSE annotation in modules.
The build time check is fatal as we really
want this fixed for all modules.
In-tree modules should all have been fixed up by now.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@kernel.org>
The current PNP combined card + devices module aliase can
never ever match anything, because these values are not available
all at the same time to request a module.
Instead of adding the combined alias, we add the device id's
all as individual aliases. Device id's are exported by the PNP
bus and can now properly used to request the loading of a
matching module.
The module snd-sbawe currently exports aliases, which can never
match anything:
alias: pnp:cCTLXXXXdCTL0045dCTL0022*
alias: pnp:cCTLXXXXdCTL0044dCTL0023*
alias: pnp:cCTLXXXXdCTL0042dCTL0022*
alias: pnp:cCTLXXXXdCTL0041dCTL0021*
alias: pnp:cCTLXXXXdCTL0031dCTL0021*
alias: pnp:cCTL00eddCTL0041dCTL0070*
alias: pnp:cCTL00e9dCTL0045dCTL0022*
alias: pnp:cCTL00e4dCTL0045dCTL0022*
alias: pnp:cCTL00c7dCTL0045dCTL0022*
alias: pnp:cCTL00c5dCTL0045dCTL0022*
alias: pnp:cCTL00c3dCTL0045dCTL0022*
alias: pnp:cCTL00c1dCTL0042dCTL0022*
alias: pnp:cCTL00b2dCTL0044dCTL0023*
alias: pnp:cCTL009edCTL0044dCTL0023*
alias: pnp:cCTL009ddCTL0042dCTL0022*
alias: pnp:cCTL009fdCTL0041dCTL0021*
alias: pnp:cCTL009cdCTL0041dCTL0021*
alias: pnp:cCTL009adCTL0041dCTL0021*
alias: pnp:cCTL0054dCTL0031dCTL0021*
alias: pnp:cCTL0048dCTL0031dCTL0021*
alias: pnp:cCTL0047dCTL0031dCTL0021*
alias: pnp:cCTL0046dCTL0031dCTL0021*
alias: pnp:cCTL0045dCTL0031dCTL0021*
alias: pnp:cCTL0044dCTL0031dCTL0021*
alias: pnp:cCTL0043dCTL0031dCTL0021*
alias: pnp:cCTL0042dCTL0031dCTL0021*
alias: pnp:cCTL0039dCTL0031dCTL0021*
alias: pnp:cCTL0035dCTL0031dCTL0021*
With this patch it exports only the device id's, as properly
matchable aliases:
alias: pnp:dCTL0070*
alias: pnp:dCTL0045*
alias: pnp:dCTL0023*
alias: pnp:dCTL0044*
alias: pnp:dCTL0022*
alias: pnp:dCTL0042*
alias: pnp:dCTL0041*
alias: pnp:dCTL0021*
alias: pnp:dCTL0031*
Now, the exported value of the PNP bus can be used to autoload
a matching module:
$ modprobe --first-time -n -v pnp:dCTL0045
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-rawmidi.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-hwdep.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb-common.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-csp.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-dsp.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/opl3/snd-opl3-lib.ko
insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sbawe.ko
$ grep CTL0045 /sys/bus/pnp/devices/*/id
/sys/bus/pnp/devices/01:01.00/id:CTL0045
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The module alias support in the kernel have a consistency
check where it is checked that the size of a structure
in the kernel and on the build host are the same.
For cross builds this check does not make sense so detect
when we do cross builds and silently skip the check in these
situations.
This fixes a build bug for a wireless driver when cross building
for arm.
Acked-by: Michael Buesch <mb@bu3sch.de>
Tested-by: Gordon Farquharson <gordonfarquharson@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: stable@kernel.org
XXXINIT_TO_INIT and XXXEXIT_TO_EXIT warnings use the reversed symbol name order
in the suggestion, e.g.:
WARNING: vmlinux.o(.meminit.text+0x36c): Section mismatch in reference from the function free_area_init_core() to the function .init.text:setup_usemap()
The function __meminit free_area_init_core() references
a function __init setup_usemap().
If free_area_init_core is only used by setup_usemap then
annotate free_area_init_core with a matching annotation.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This adds some new magic in the MODPOST phase for CONFIG_MARKERS. Analogous
to the Module.symvers file, the build will now write a Module.markers file
when CONFIG_MARKERS=y is set. This file lists the name, defining module, and
format string of each marker, separated by \t characters. This simple text
file can be used by offline build procedures for instrumentation code,
analogous to how System.map and Module.symvers can be useful to have for
kernels other than the one you are running right now.
The strings are made easy to extract by having the __trace_mark macro define
the name and format together in a single array called __mstrtab_* in the
__markers_strings section. This is straightforward and reliable as long as
the marker structs are always defined by this macro. It is an unreasonable
amount of hairy work to extract the string pointers from the __markers section
structs, which entails handling a relocation type for every machine under the
sun.
Mathieu :
- Ran through checkpatch.pl
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: David Smith <dsmith@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
modpost: Use warn() for announcing section mismatches, for easy grepping for
warnings in build logs.
Also change an existing call from fprintf() to warn() while we're at it.
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
If we cannot determine the symbol then print
(unknown) to hint the reader that we failed to
find the symbol.
This happens with REL relocation records
in arm object files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We have several legitimate uses where we export symbols
annotated with one of:
__devinit, __cpuinit, __meminit and their exit counterpart.
So let's stop warning about those being exported in favour
of adding all sorts of workaround to silence the warning.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We have too many section mismatches detected at the moment.
So silence modpost and prevent the option from being
set in a typical allyesconfig build.
Tell the user how to see all the deteils in the summary
message from modpost.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Some crazy devices in the wild have a vendor id of 0x0000. If we try to
add a module alias with this id, we just can't do it due to a check in
the file2alias.c file. Change the test to verify that both the vendor
and product ids are 0x0000 to show a real "blank" module alias.
Note, the module-init-tools package also needs to be changed to properly
generate the depmod tables.
Cc: Janusz <janumix@poczta.fm>
Cc: stable <stable@kernel.org>
Cc: Jon Masters <jcm@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If there is a mixture of specifying sections for code in gcc
and assembler then if the assembler code do not add
the "ax" flags the linker will see this as two different sections
and generate unique sections for each. ld does so by adding a dot
and a number.
Teach modpost to warn if a section shows up that match this
pattern - but do this only for non-debug sections.
It will result in warnings like this:
WARNING: vmlinux.o (.sched.text.1): unexpected section name.
The (.[number]+) following section name are ld generated and not expected.
Did you forget to use "ax"/"aw" in a .S file?
Note that for example <linux/init.h> contains
section definitions for use in .S files.
All warnings seen with a defconfig build for:
x86 (32+64bit) and sparc64 has been fixed (via respective maintainers).
arm, powerpc (64 bit), s390 (32 bit), ia64, alpha, sh4 checked - no
warnings seen with a defconfig build.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
If the config option CONFIG_SECTION_MISMATCH is not set and
we see a Section mismatch present the following to the user:
modpost: Found 1 section mismatch(es).
To see additional details select "Enable full Section mismatch analysis"
in the Kernel Hacking menu (CONFIG_SECTION_MISMATCH).
If the option CONFIG_SECTION_MISMATCH is selected
then be verbose in the Section mismatch reporting from mdopost.
Sample outputs:
WARNING: o-x86_64/vmlinux.o(.text+0x7396): Section mismatch in reference from the function discover_ebda() to the variable .init.data:ebda_addr
The function discover_ebda() references
the variable __initdata ebda_addr.
This is often because discover_ebda lacks a __initdata
annotation or the annotation of ebda_addr is wrong.
WARNING: o-x86_64/vmlinux.o(.data+0x74d58): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit()
The variable pci_serial_quirks references
the function __devexit pci_plx9050_exit()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: o-x86_64/vmlinux.o(__ksymtab+0x630): Section mismatch in reference from the variable __ksymtab_arch_register_cpu to the function .cpuinit.text:arch_register_cpu()
The symbol arch_register_cpu is exported and annotated __cpuinit
Fix this by removing the __cpuinit annotation of arch_register_cpu or drop the export.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Remove the deprecated __attribute_used__.
[Introduce __section in a few places to silence checkpatch /sam]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Refactor code so the warning report function
does nothing else than reporting warnings.
As a side effect some other code paths were cleaned
up by this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The typical layout is now:
WARNING: vmlinux.o(.text+0x372ec): Section mismatch: reference to .devinit.text:pci_scan_one_pbm in 'psycho_scan_bus'
This is first step towards more readable warnings.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Introducing separate sections for __dev* (HOTPLUG),
__cpu* (HOTPLUG_CPU) and __mem* (MEMORY_HOTPLUG)
allows us to do a much more reliable Section mismatch
check in modpost. We are no longer dependent on the actual
configuration of for example HOTPLUG.
This has the effect that all users see much more
Section mismatch warnings than before because they
were almost all hidden when HOTPLUG was enabled.
The advantage of this is that when building a piece
of code then it is much more likely that the Section
mismatch errors are spotted and the warnings will be
felt less random of nature.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Adrian Bunk <bunk@kernel.org>
Change the logic in modpost so we identify all the
bad combinations of sections that refer to other
sections.
Compared to the previous approach we are much less
dependent on knowledge of what additional sections
the tool chain uses and thus we can keep the false
positives low.
The implmentation is changed to use a table based
lookup and we now check all combinations in first
pass so we no longer need separate passes for init
and exit sections.
Tested that the same warnings are generated for
an allyesconfig build without CONFIG_HOTPLUG.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Adrian Bunk <bunk@kernel.org>
Split a too long function up in smaller bits to make
prgram logic easier to follow.
A few related changes done due to parameter
changes.
No functional changes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The relocation record sometimes contained an address
which was not an exactly match for a symbol.
Implment some simple logic such that if there
is a symbol within 20 bytes of the address contained
in the relocation record then print the name of this
symbol.
With this change modpost could find symbol names
for the remaining .init.text symbols in my
allyesconfig build for x86_64.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
It is very convinient to say:
scripts/mod/modpost mm/built-in.o
to check if any section mismatch errors occured
in mm/ (as an example).
Fix it so this is possible again.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
akpm complained about overly long lines in modpost.c and
when started additional style issues were fixed:
o Updated my copyright
o Removed unneeded {}
o Drop assignments in if ()
o Spaces around operators
o Break long lines
o locate * near variable not type
o Fix a format specifier for sizeof()
o Corrected placement of '{' and '}'
o spaces to tabs (but use tabs only for indention)
modpost.c is not checkpatch clean. Readability were favoured
on top of checkpatch compliance.
But checkpatch were used to find additional stuff to clean up.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When passing an file name > 1k the stack could be overflowed.
Not really a security issue, but still better plugged.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fix wrong format strings in modpost exposed by the previous patch.
Including one missing argument -- some random data was printed instead.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This adds the logic to convert the virtio ids into module aliases, and
includes a modalias entry in sysfs and the env var to make probing work.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When part of build an external module tree, modpost first reads in the
kernel's and then the external tree's Module.symvers files. From these files
it establishes a symbol => module mapping. When it later reads in each module
built and processes the symbols it finds, it discovers the symbol=>module
mapping from Module.symvers and leaves it as it is.
The problem comes with a module has been re-named or a symbol has moved from
one module to another, since the Module.symvers file was generated. modpost
does not update the symbol=>module mapping when it finds the new location of
the symbol when scanning the newly built modules. This results in the module
containing incorrect dependency information and the new Module.symvers file
written by modpost will also contain the incorrect mappings, perpetuating the
problem to the next build, and so on.
When building the out of kernel development tree for kernel subsystem, like
v4l-dvb or ALSA, deleting the external Module.symvers file before building
(which the kernel build system doesn't do and shouldn't be necessary anyway),
won't fix the problem. modpost still reads the kernel's Module.symvers, and
since we a building a kernel subsystem, it will define the same symbols as the
external modules.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (40 commits)
kbuild: introduce ccflags-y, asflags-y and ldflags-y
kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP
kbuild: enable use of AFLAGS and CFLAGS on commandline
kbuild: enable 'make AFLAGS=...' to add additional options to AS
kbuild: fix AFLAGS use in h8300 and m68knommu
kbuild: check for wrong use of CFLAGS
kbuild: enable 'make CFLAGS=...' to add additional options to CC
kbuild: fix up CFLAGS usage
kbuild: make modpost detect unterminated device id lists
kbuild: call export_report from the Makefile
kbuild: move Kai Germaschewski to CREDITS
kconfig/menuconfig: distinguish between selected-by-another options and comments
kconfig: tristate choices with mixed tristate and boolean values
include/linux/Kbuild: remove duplicate entries
kbuild: kill backward compatibility checks
kbuild: kill EXTRA_ARFLAGS
kbuild: fix documentation in makefiles.txt
kbuild: call make once for all targets when O=.. is used
kbuild: pass -g to assembler under CONFIG_DEBUG_INFO
kbuild: update _shipped files for kconfig syntax cleanup
...
Fix up conflicts in arch/um/sys-{x86_64,i386}/Makefile manually.
I2C devices do not have any form of ID as PCI or USB devices have.
No driver uses "MODULE_DEVICE_TABLE(i2c, ...)" because it doesn't
make sense. So we can get rid of struct i2c_device_id and the
associated support code.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>
Cause modpost to fail if any device id lists are incorrectly terminated,
after reporting the offender.
Improved reporting by akpm
Signed-off-by: Kees Cook <kees@ubuntu.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Ben Collins <bcollins@ubuntu.com>
Cc: Michael Wu <flamingice@sourmilk.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fix modpost segfault.
Before:
-------
ynezz@ntbk:~/linux-2.6.git$ scripts/mod/modpost vmlinux ath_pci.o
Segmentation fault
After:
------
ynezz@ntbk:~/linux-2.6.git$ scripts/mod/modpost vmlinux ath_pci.o
FATAL: section header offset=815726848 in file 'ath_pci.o' is bigger then filesize=153968
Sam: This seems to warn for a binutils issue. Anyway modpost should not
segfault.
Signed-off-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The Elfnn_Section is not available on all platforms,
noteworthy are cygwin.
Use the safe replacement _Half.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits)
[SKY2]: status polling loop (post merge)
[NET]: Fix NAPI completion handling in some drivers.
[TCP]: Limit processing lost_retrans loop to work-to-do cases
[TCP]: Fix lost_retrans loop vs fastpath problems
[TCP]: No need to re-count fackets_out/sacked_out at RTO
[TCP]: Extract tcp_match_queue_to_sack from sacktag code
[TCP]: Kill almost unused variable pcount from sacktag
[TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L
[TCP]: Add bytes_acked (ABC) clearing to FRTO too
[IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2
[NETFILTER]: x_tables: add missing ip6t_modulename aliases
[NETFILTER]: nf_conntrack_tcp: fix connection reopening
[QETH]: fix qeth_main.c
[NETLINK]: fib_frontend build fixes
[IPv6]: Export userland ND options through netlink (RDNSS support)
[9P]: build fix with !CONFIG_SYSCTL
[NET]: Fix dev_put() and dev_hold() comments
[NET]: make netlink user -> kernel interface synchronious
[NET]: unify netlink kernel socket recognition
[NET]: cleanup 3rd argument in netlink_sendskb
...
Fix up conflicts manually in Documentation/feature-removal-schedule.txt
and my new least favourite crap, the "mod_devicetable" support in the
files include/linux/mod_devicetable.h and scripts/mod/file2alias.c.
(The latter files seem to be explicitly _designed_ to get conflicts when
different subsystems work with them - that have an absolutely horrid
lack of subsystem separation!)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the net namespaces many code leaved the __init section,
thus making the kernel occupy more memory than it did before.
Since we have a config option that prohibits the namespace
creation, the functions that initialize/finalize some netns
stuff are simply not needed and can be freed after the boot.
Currently, this is almost not noticeable, since few calls
are no longer in __init, but when the namespaces will be
merged it will be possible to free more code. I propose to
use the __net_init, __net_exit and __net_initdata "attributes"
for functions/variables that are not used if the CONFIG_NET_NS
is not set to save more space in memory.
The exiting functions cannot just reside in the __exit section,
as noticed by David, since the init section will have
references on it and the compilation will fail due to modpost
checks. These references can exist, since the init namespace
never dies and the exit callbacks are never called. So I
introduce the __exit_refok attribute just like it is already
done with the __init_refok.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
SSB is an SoC bus used in a number of embedded devices. The most
well-known of these devices is probably the Linksys WRT54G, but there
are others as well. The bus is also used internally on the BCM43xx
and BCM44xx devices from Broadcom.
This patch also includes support for SSB ID tables in modules, so
that SSB drivers can be loaded automatically.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is needed on MIPS where the same mechanism as get_user() is used to
intercept bus error exceptions for some hardware probes. Without this
patch modpost will throw spurious warnings:
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
MODPOST vmlinux
WARNING: arch/mips/sgi-ip22/built-in.o(__dbe_table+0x0): Section mismatch: reference to .init.text:
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Xtensa architecture places literal pools in sections separate
from the instructions. The corresponsing text sections, therefore,
reference the .literal section, and we have to suppress those
warnings.
The naming convention defines the name for a literal
section as .SECTION.literal, unless .SECTION is .text. In that case
the name is only .literal. Using strncmp() instead of strcmp()
to compare the from-section with .SECTION.init.refok in pattern 0
should not cause any regressions for other architectures.
We also need to suppress warnings for two informational
sections (.xt.lit and .xt.prop) used by the Xtensa architecture.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
In the whitelist function of modpost now use the same
check to identify init_section as in other places of modpost.
This has the effect that we now recognize sections named
.init.text.19 as init sections and we no longer warn
when we see these.
At the same time make surrounding code readable by dropping
use of temporary flags.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We already check and warn about section mismatches from vmlinux
(build as vmlinux.o) during first pass so skip the checks
during the 2nd pass where we process modules.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Modify modpost (file2alias.c) to add acpi*:XYZ0001: alias in modules.alias
like:
grep acpi /lib/modules/2.6.22-rc4-default/modules.alias
alias acpi*:SNY5001:* sony_laptop
alias acpi*:SNY6001:* sony_laptop
for e.g. the sony_laptop module.
This module matches against all ACPI devices with a HID or CID of SNY5001
or SNY6001
Export an uevent and modalias sysfs file containing the string:
[MODALIAS=]acpi:PNP0C0C:
additional CIDs are concatenated at the end.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Len Brown <len.brown@intel.com>
This is needed on MIPS where the same mechanism as get_user() is used to
intercept bus error exceptions for some hardware probes. Without this
patch modpost will throw spurious warnings:
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
MODPOST vmlinux
WARNING: arch/mips/sgi-ip22/built-in.o(__dbe_table+0x0): Section mismatch: reference to .init.text:
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
gcc puts data into .data.rel or .data.rel.* on some architectures (e.g.
ia64) or under certain conditions, so whatever is legal relative to
.data should also be legal for those other sections. Fixes a few
modpost warnings on ia64.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Previously we did do the check on the .o files used to link
vmlinux but that failed to find questionable references across
the .o files.
Create a dedicated vmlinux.o file used only for section mismatch checks
that uses the defualt linker script so section does not get renamed.
The vmlinux.o may later be used as part of the the final link of vmlinux
but for now it is used fo section mismatch only.
For a defconfig build this is instant but for an allyesconfig this
add two minutes to a full build (that anyways takes ~2 hours).
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
arm uses a lot of ops structures named *_timer that has legitimite
references to .init.text.
So let's add this variable to the list of variables that may reference
.init.text without causing any warning.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Replaced this with a __init_refok marker
in front of fb_find_logo().
I think that the __initdata marker for the logo's are
wrong but I have not justified this so I did not remove it.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The .exit.text section may be discarded either at build or at runtime.
So let modpost warn if this situation is detected.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Move more checks from whitelist to the section check functions.
Remove the redundent pci_fixup check.
Renumber the patterns.
No functional changes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
There were a great deal of overlap between the two functions
that check which sections may reference .init.text and .exit.text.
Factor out common check to a separate function and
sort entries in the original functions.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
.note* sections are ELF notes, which are typically used by external
tools to examine the kernel image. Since this is removed from any
runtime consideration, it's OK to reference any section from a .note*
section.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The .paravirtprobe section is obsolete, so modpost doesn't need to handle it.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We should do better here by effetively "dereferencing" references to
the .toc (or the .got2) section, but that is much harder.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
