When acpi=off or there is no SRAT defined, apicid_to_node is got from K8
Northbridge PCI configuration space in k8_scan_nodes() in
arch/x86_64/mm/k8toplogy.c.
The problem is that it assumes bsp apic id is 0 at that point.
For four socket system with Quad core cpus installed, all cpus apic id
is offset by 4, and bsp apic id is 4.
For eight socket system with dual core cpus installed, all cpus apic id
is offset by 2, and bsp apic id is 2.
We need get boot_cpu_id --- bsp apic id, before k8_scan_nodes by called.
So create early_acpi_boot_init and early_get_smp_config for get boot_cpu_id.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
<asm-x86/nops.h> describes certain multibyte instructions as
"generic" nops when in fact they aren't nops at all in 64-bit
mode (missing REX.W causing truncation of a register).
Update the comment to state that K8 or P6 style nops should be
used in 64-bit mode. This matches what the alternatives code does.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Otherwise, enabling (or better, subsequent disabling) of single
stepping would cause a kernel oops on CPUs not having this MSR.
The patch could have been added a conditional to the MSR write in
user_disable_single_step(), but centralizing the updates seems safer
and (looking forward) better manageable.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the x86 native_smp_send_reschedule_function(), don't send the IPI if the
cpu has gone offline already. Warn nevertheless!!
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
adds cpu_has_arch_perfmon to test presence of architectural perfmon on
Intel x86 processor
Signed-off-by: Stephane Eranian <eranian@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix:
ERROR: do not initialise externals to 0 or NULL
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
otherwise Vmemmap and High Kernel Mapping string is not showing up.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
store initial_apicid from early identify. it is could be different from
phys_proc_id later.
also print it out in /proc/cpuinfo.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix a memcpy that should be a text_poke (in apply_alternatives).
Use kernel_wp_save/kernel_wp_restore in text_poke to support DEBUG_RODATA
correctly and so the CPU HOTPLUG special case can be removed.
Add text_poke_early, for alternatives and paravirt boot-time and module load
time patching.
Changelog:
- Fix text_set and text_poke alignment check (mixed up bitwise and and or)
- Remove text_set
- Export add_nops, so it can be used by others.
- Document text_poke_early.
- Remove clflush, since it breaks some VIA architectures and is not strictly
necessary.
- Add kerneldoc to text_poke and text_poke_early.
- Create a second vmap instead of using the WP bit to support Xen and VMI.
- Move local_irq disable within text_poke and text_poke_early to be able to
be sleepable in these functions.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Andi Kleen <andi@firstfloor.org>
CC: pageexec@freemail.hu
CC: H. Peter Anvin <hpa@zytor.com>
CC: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
for system with apicid lifting, boot cpu apicid will be 4
got:
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/4 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
so try to offset apicid back before get phys_proc_id with bits shift.
then we can get correct socket ID
also remove remove cpu_data(0) reference.
because cpu_data(0) only be ready after smp_prepare_cpus with the assignment
from boot_cpu_data to current_cpu_data aka cpu_data(0).
and check_bugs()==>identify_cpu(&boot_cpu_data) is quite before than
smp_prepare_cpus. So just use boot_cpu_id instead.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
wraps the busy loop for wait_for_init_deasserted() in a function,
so smp_callin in x86_64 looks like more i386
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
setup_trampoline() looks very similar between architectures, and this
patch unifies them. The i386 version allocates bootmem memory, while
the x86_64 version uses a fixed address.
In this patch, we initialize the global trampoline_base to the x86_64 version,
and i386 allocation can later override it.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
make setup_trampoline non-static. This way, it won't conflict
with the extern declaration in smp.h
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change voyager's trampoline base to unsigned char *
instead of u32. This way, it won't conflict with
the other architectures when including smp.h
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The parameter passing parsing is done in the common smpboot.c
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
it was already cleared two lines above, and so, this removal
is bogus
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
it is already used in x86_64. In i386, it only
removes from cpu_online_map
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This lock does not protect cpu_online_map, so its
length can be shortened, and in some cases, removed.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
set_cpu_sibling_map() and remove_sibling_info() are
equal between architectures, and are now moved to common
file
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
definitions that are inside CONFIG_HOTPLUG_CPU in
the arch-specific smp*.h files are moved to common
header
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
move definitions that are now equal in type from
smpboot_{32,64}.c to smpboot.c
cpu_callin_map is put temporarily in smp_64.h (already
exists in smp_32.h), and will soon be merged.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
