Commit graph

211864 commits

Author SHA1 Message Date
Jarod Wilson
4fc215430f [media] lirc_dev: fixup error messages w/missing newlines
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:36 -02:00
Jarod Wilson
8be292cc03 [media] lirc: wire up .compat_ioctl to main ioctl handler
As pointed out (and tested) by Joris van Rantwijk, we do actually need
to wire up .compat_ioctl for 32-bit lirc userspace to work with 64-bit
lirc kernelspace. Do it. And add a check to make sure we get a valid
irctl in the ioctl handler.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:36 -02:00
Jarod Wilson
a126681810 [media] staging/lirc: ioctl portability fixups
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:35 -02:00
Jarod Wilson
be1f985ffa [media] IR/lirc: further ioctl portability fixups
>From Joris van Rantwijk <jorispubl@xs4all.nl>:

	I tested lirc_serial and found that it works fine.
	Except the LIRC ioctls do not work in my 64-bit-kernel/32-bit-user
	setup. I added compat_ioctl entries in the drivers to fix this.

	While doing so, I noticed inconsistencies in the argument type of
	the LIRC ioctls. All ioctls are declared in lirc.h as having argument
	type __u32, however there are a few places where the driver calls
	get_user/put_user with an unsigned long argument.

	The patch below changes lirc_dev and lirc_serial to use __u32 for all
	ioctl arguments, and adds compat_ioctl entries.
	It should probably also be done in the other low-level drivers,
	but I don't have hardware to test those.

I've dropped the .compat_ioctl addition from Joris' original patch,
as I swear the non-compat definition should now work for both 32-bit
and 64-bit userspace. Technically, I think we still need/want a
in getting a reply to you).

Reported-by: Joris van Rantwijk <jorispubl@xs4all.nl>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:34 -02:00
Jarod Wilson
d322bf4ab2 [media] IR/Kconfig: sort hardware entries alphabetically
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:33 -02:00
Jarod Wilson
fbdc781c6b [media] nuvoton-cir: add proper rx fifo overrun handling
Per discussion with Andy Walls on irc, rx fifo overruns are not all that
uncommon on a busy system, and the initial posting of the nuvoton-cir
driver doesn't handle them well enough. With this addition, we'll drain
the hw fifo, attempt to process any ir pulse trains completed with that
flush, then we'll issue a hw rx fifo clear and reset the raw ir sample
kfifo and start over collecting raw ir data.

Also slightly refactors the cir interrupt enabling so that we always get
consistent flags set and only have to modify them in one place, should
they need to be altered.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:32 -02:00
Jarod Wilson
6d2f5c2788 [media] IR: add driver for Nuvoton w836x7hg integrated CIR
This is a new ir-core pnp driver for the Nuvoton w836x7hg integrated CIR
function. The chip is found on at least the ASRock ION 330HT boxes and
apparently, on a number of Intel DP55-series motherboards:

http://www.asrock.com/nettop/overview.asp?Model=ION%20330HT
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=17685&lang=eng

This driver was made possible by a hardware donation from Nuvoton, along
with sample code (in the form of an lirc driver) and datasheet, so huge
thanks to them for supporting this effort. Note that this driver
constitutes a massive rewrite, porting from the lirc interfaces to the
ir-core interfaces, and restructuring the driver to look more like Maxim
Levitsky's ene_ir driver (as well as generally making it look more like
kernel code).

There's some work left to be done on this driver, to fully support the
range of functionality possible, but receive and IR power-on/wake are
both functional (may require setting wake key under another OS atm). The
hardware I've got (one of the ASRock boxes) only supports RX, so TX is
completely untested as of yet. Certain RX parameters, like sample
resolution and RX IRQ sample length trigger level could possibly stand
to be made tweakable via modparams or sysfs nodes, but the current
values work well enough for me w/an MCE RC6A remote.

The original lirc driver carried support for the Windows MCE IR
keyboard/mouse device, which I plan to add back generically, in a way
that should be usable by any raw IR receiver (or at least by this driver
and the mceusb driver).

Suspend and resume have also been tested, the power button on my remote
can be used to wake the machine, and CIR functionality resumes just
fine. Module unload/reload has also been tested, though not extensively
or repetitively. Also tested to work with the lirc bridge plugin for
userspace decoding.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:30 -02:00
Jean-François Moine
72b667ebc1 [media] gspca - sonixj: Use the new video control mechanism
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:29 -02:00
Jean-François Moine
62833acd7d [media] gspca - ov519: Use the new video control mechanism
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:28 -02:00
Jean-François Moine
016f236227 [media] gspca - stk014: Use the new video control mechanism
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:28 -02:00
Jean-François Moine
6a33091f13 [media] gspca - main: New video control mechanism
The new control mechanism uses dynamic control values in the subdriver
descriptor. It simplifies standard control handling.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:27 -02:00
Laurent Pinchart
27a61c13ec [media] uvcvideo: Fix uvc_query_v4l2_ctrl() and uvc_xu_ctrl_query() locking
Take the ctrl_mutex mutex before touching control information in those
functions.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:26 -02:00
Laurent Pinchart
b5977a58c3 [media] uvcvideo: Fix bogus XU controls information
XU control information is supposed to be entirely discoverable using
standard UVC queries. As some devices report bogus information (such as
reporting a read-only control as being read-write), add a fixup table
for XU controls.

This table can also be used to selectively disable requests supposed to
be supported by all XU controls (GET_MIN, GET_MAX, GET_DEF, GET_RES) but
not correctly (or at all) supported by the device.

The table currently disables GET_CUR on the Logitech motor control XU
pan/tilt controls.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:25 -02:00
Laurent Pinchart
52c58ad6f9 [media] uvcvideo: Delay initialization of XU controls
XU controls initialization requires querying the device for control
information. As some buggy UVC devices will crash when queried
repeatedly in a tight loop, delay XU controls initialization until first
use.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:24 -02:00
Laurent Pinchart
071c8bb827 [media] uvcvideo: Embed uvc_control_info inside struct uvc_control
Now that control information structures are not shared between control
instances, embed a uvc_control_info instance inside the uvc_control
structure instead of storing a pointer.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:23 -02:00
Martin Rubli
8fb91b33c6 [media] uvcvideo: Remove sysadmin requirements for UVCIOC_CTRL_MAP
This patch removes the sysadmin requirements for UVCIOC_CTRL_MAP (and the stub
implementation of UVCIOC_CTRL_ADD). This requirement no longer makes sense with
the new XU control access mechanisms since XU controls can be accessed without
adding control mappings first.

A maximum number (currently 1024) of control mappings per device is enforced to
avoid excess memory consumption caused by careless user space applications.

Signed-off-by: Martin Rubli <martin_rubli@logitech.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:22 -02:00
Laurent Pinchart
ba2fa99668 [media] uvcvideo: Hardcode the index/selector relationship for XU controls
Devices advertise XU controls using a bitmask, in which each bit
corresponds to a control. The control selector, used to query the
control, isn't available in the USB descriptors.

All known UVC devices use control selectors equal to the control bit
index plus one. Hardcode that relationship in the driver, making the
UVCIOC_CTRL_ADD ioctl obsolete. All necessary information about XU
controls can be obtained by the driver at enumeration time.

The UVCIOC_CTRL_ADD ioctl is still supported for compatibility reasons,
but now always returns -EEXIST.

Finally, control mappings are now on a per-device basis and no longer
global.

As this changes the userspace interface, bump the driver version number
to 1.0.0 (it was about time).

Signed-off-by: Martin Rubli <martin_rubli@logitech.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:21 -02:00
Laurent Pinchart
650b95feee [media] uvcvideo: Generate discontinuous sequence numbers when frames are lost
Increase the sequence number of the v4l2_buffer structure regardless of
any buffer states, so that discontinuous sequence numbers allow
applications to detect lost video frames.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:20 -02:00
Laurent Pinchart
9bb7262de9 [media] uvcvideo: Set bandwidth to at least 1024 with the FIX_BANDWIDTH quirk
The bandwidth estimate computed with the FIX_BANDIWDTH quirk is too low
for many cameras. Don't use maximum packet sizes lower than 1024 bytes
to try and work around the problem. According to measurements done on
two different camera models, the value is high enough to get most
resolutions working while not preventing two simultaneous VGA streams at
15 fps.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:19 -02:00
Laurent Pinchart
11fc5baf1d [media] uvcvideo: Update e-mail address and copyright notices
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:18 -02:00
Laurent Pinchart
707dcd903f [media] uvcvideo: Print query name in uvc_query_ctrl()
Instead of printing the query hex value in error messages, print its
name to make the messages more readable.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:17 -02:00
Laurent Pinchart
f9d81df9b8 [media] uvcvideo: Constify the uvc_entity_match_guid arguments
They're not modified by the function, make them const.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:17 -02:00
Laurent Pinchart
fa34168bd8 [media] uvcvideo: Blacklist more controls for Hercules Dualpix Exchange
The Hercules Dualpix Exchange (06f8:3005) camera expose an absolute zoom
that is not implemented. Blacklist it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:16 -02:00
Hans Verkuil
9c84d89bf1 [media] radio-mr800: fix locking order
Don't hold the lock before unregistering the device, since when the
device is unregistered the datastruct containing the lock may be freed
(if the refcount went to 0).

Also fixed the framework documentation that erroneously suggested the
wrong locking order as well.

Reported-by: David Ellingsworth <david@identd.dyndns.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: David Ellingsworth <david@identd.dyndns.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:15 -02:00
Antti Palosaari
1cd72781db [media] af9015: move remote controllers to new RC core
Use new RC core instead of old legacy RC implementation.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:14 -02:00
Antti Palosaari
3cbf5072ee [media] fix A-Link DTU(m) remote controller PIP button
Button is PIP => KEY_NEW
http://www.linuxtv.org/wiki/index.php/Remote_Controllers

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:13 -02:00
Antti Palosaari
dfd6f7fab5 [media] fix TerraTec remote controller PIP button
Button is PIP => KEY_NEW
http://www.linuxtv.org/wiki/index.php/Remote_Controllers
Thanks to Cart.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:12 -02:00
Antti Palosaari
f8b3d9a002 [media] fix MSI DIGIVOX mini III remote controller power buttons
Fix power button mappings as defined in
http://www.linuxtv.org/wiki/index.php/Remote_Controllers

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:11 -02:00
Antti Palosaari
20d747b4c4 [media] Total Media In Hand remote controller
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:10 -02:00
Antti Palosaari
860d1e2920 [media] rename rc-msi-digivox.c -> rc-msi-digivox-iii.c
Rename remote controller driver I added earlier.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:09 -02:00
Antti Palosaari
c12d2f746b [media] MSI DIGIVOX mini II remote controller
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:08 -02:00
Antti Palosaari
ad7fac3484 [media] A-Link DTU(m) remote controller
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:07 -02:00
Antti Palosaari
3f37fcedb2 [media] TwinHan AzureWave AD-TU700(704J) remote controller
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:06 -02:00
Antti Palosaari
a7a177877c [media] LeadTek Y04G0051 remote controller keytable
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:05 -02:00
Antti Palosaari
ae54a699c3 [media] AverMedia RM-KS remote controller keytable
Imported from af9015.h. Initial keytable was from
Jose Alberto Reguero <jareguero@telefonica.net> and
Felipe Morales Moreno <felipe.morales.moreno@gmail.com>

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:04 -02:00
Antti Palosaari
ff533801bd [media] Digittrade DVB-T USB Stick remote controller keytable
Digittrade DVB-T USB Stick remote controller.
Imported from af9015.h. Initial keytable was from Alain Kalker <miki@dds.nl>

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:03 -02:00
Antti Palosaari
a3d34e6ac3 [media] TrekStor DVB-T USB Stick remote controller
Imported from af9015.h.
Initial keytable was from Marc Schneider <macke@macke.org>

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:02 -02:00
Antti Palosaari
76ba9c4d50 [media] MSI DIGIVOX mini III remote controller keytable
MSI DIGIVOX mini III remote controller. Uses NEC extended 0x61d6.
This remote seems to be same as rc-kworld-315u.c. Anyhow, add new remote
since rc-kworld-315u.c lacks NEC extended address byte.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:01 -02:00
Antti Palosaari
68617b31b3 [media] TerraTec remote controller keytable
TerraTec slim remote, 7 rows, 4 columns. Uses NEC extended 0x02bd.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:01 -02:00
Antti Palosaari
675375d7ae [media] af9015: remove needless variable set
Variable is don't care in that case. No need to set value.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:18:00 -02:00
Antti Palosaari
9a3ecc7382 [media] af9015: make checkpatch.pl happy
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:17:59 -02:00
Yann E. MORIN
8ccdf1ae9d [media] v4l/dvb: add support for AVerMedia AVerTV Red HD+ (A850T)
The AVerTV Red HD+ (A850T) is basically the same as the existing
AVerTV Volar Black HD (A850), but is specific to the french market.
The A850T identifies itself as a A850, but has its own PID. It even
suffers from the same EEPROM deficiencies.

This is based off a collection of information gathered from the
french support forums for Ubuntu, which I tried to properly format
into this patch:
  http://forum.ubuntu-fr.org/viewtopic.php?pid=3322825

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:17:58 -02:00
Antti Palosaari
9e35cd222b [media] af9013: cache some reg values to reduce reg reads
Demod + tuner specific RF AGC and IF AGC limit values are read from demod
memory in every signal strength query. Cache those to reduce I2C traffic.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:17:55 -02:00
Antti Palosaari
edb709b61a [media] af9013: optimize code size
Precalculate coefficients register values. This reduces text size around 300 bytes.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:17:54 -02:00
Mauro Carvalho Chehab
589851d599 [media] V4L-DVB: tm6000: Move VBI init to a separate function
While here, documment that VBI may need changes, based on video STD, and
do some cleanup at device init, to be sure that VBI init will happen
all the times, and to remove a duplicated video standard call.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:17:53 -02:00
Dmitry Belimov
421d1b7071 [media] tm6000: Improve audio standards handling and add SECAM-DK
Rework audio. Add SECAM-DK, move SECAM to SECAM-B | SECAM-G.

Add some new audio standards and tricks for future, see
tm6000_set_audio_std.

For SECAM-DK it works.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:17:52 -02:00
Mauro Carvalho Chehab
709944eae2 [media] tm6000: add audio standards table
The better is to remove the audio init from tm6000-core and add a
separate per-standard set of tables.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:17:51 -02:00
Mauro Carvalho Chehab
39a96b4cf5 [media] em28xx-audio: fix some locking issues
Those locking issues affect tvtime, causing a kernel oops/panic, due to
a race condition.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:17:50 -02:00
Mauro Carvalho Chehab
643800d5c8 [media] cx231xx: use core-assisted lock
Instead of doing its own lock, use core-assisted one. As a bonus, it
will do the proper unlock during queue wait events. This fixes a
long-standing bug where softwares like tvtime would hang if you try to
use cx231xx-alsa.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:17:49 -02:00
Mauro Carvalho Chehab
0f86158375 [media] cx231xx: Colibri carrier offset was wrong for PAL/M
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:17:48 -02:00