Commit graph

186 commits

Author SHA1 Message Date
Paul Mundt
9895f9429c sh: clear/copy_page renames in lib and lib64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:54 +09:00
Paul Mundt
efddb4c882 sh: Rename the _32 and _64 TLB flush variants.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:54 +09:00
Paul Mundt
1e1ed39fae sh: Copy over special CFLAGS for SH-5 TLB miss.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:53 +09:00
Paul Mundt
60b2249d45 sh: Move over SH-5 TLB and cache support code.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:52 +09:00
Paul Mundt
ddf7f1d339 sh: Kill off a stray proc tlb reference in fault_64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:52 +09:00
Paul Mundt
711fe4369c sh: Bump the MEMORY_SIZE default to something reasonable.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:52 +09:00
Paul Mundt
36763b22be sh: Switch SH-5 to use CONFIG_PAGE_OFFSET.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:51 +09:00
Paul Mundt
811d50cb43 sh: Move in the SH-5 TLB miss.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:50 +09:00
Paul Mundt
379a95d1d2 sh: Tidy up various clear_page()/copy_page() definitions.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:50 +09:00
Paul Mundt
ba2727b556 sh: ioremap_64 needs after_bootmem.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:49 +09:00
Paul Mundt
3eeffb3204 sh: Split out tlb-flush in to _32 and _64 variants.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:47 +09:00
Paul Mundt
249cfea914 sh: Split out pgtable.h in to _32 and _64 variants.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:47 +09:00
Paul Mundt
2b6a8d455b sh: ioremap_64 needs proc_fs.h.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:47 +09:00
Paul Mundt
ad81eb9173 sh: Split out ioremap in to _32 and _64 variants.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:46 +09:00
Paul Mundt
079060c6ff sh: Fix up 64kB page size selection on SH-5.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:45 +09:00
Paul Mundt
83ce3ac1d1 sh: Split out extable.c _32 and _64 variants.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:44 +09:00
Paul Mundt
8a7bcf0dd0 sh: Add SH-5 support to the consistent DMA impl.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:44 +09:00
Paul Mundt
36bcd39dbc sh: Split out 29-bit and 32-bit physical mode definitions.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:42 +09:00
Paul Mundt
a09063da33 sh: Switch Kconfig.sh64 to use arch/sh/mm/Kconfig.
Consolidates the HUGETLB definitions and others.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:39 +09:00
Paul Mundt
b5f42db0a7 sh: Move CPU subtypes to Kconfig.sh.
We intend to share the mm options, so move the SH-only subtypes
up a level.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:38 +09:00
Paul Mundt
0f1a394ba6 sh: lockless UTLB miss fast-path.
With the refactored update_mmu_cache() introduced in older kernels,
there's no longer any need to take the page_table_lock in this path,
so simply drop it completely.

Without this, performance degradation is seen on SMP on heavily
threaded workloads that don't use the split ptlock, and ultimately
we have no reason to contend for the lock in the first place.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-19 13:05:18 +09:00
Paul Mundt
1c6b2ca5e0 sh: Kill off UTLB flush in fast-path.
The __do_page_fault() fast-path contains a UTLB flush in order to
force an ITLB reload, this isn't needed in practice as the ITLB is
auto-reloaded from the UTLB anyways, which is already displaced by
the manual 'ldtlb' in the update_mmu_cache() path.

This provides a measurable speed up in the TLB miss fast-path.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-19 13:00:32 +09:00
Paul Mundt
af39c16bd8 sh: Kill off __{copy,clear}_user_page().
Now that copy_to_user_page()/copy_from_user_page() are wired up, we
can drop the old __copy_xxx() implementations. Now that the page
colouring scheme has changed via kmap_coherent(), we can avoid the
flush in these specific helpers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:14:12 +09:00
Paul Mundt
ba1789efea sh: Optimized copy_{to,from}_user_page() for SH-4.
This moves copy_{to,from}_user_page() out-of-line on SH-4 and
converts for the kmap_coherent() API. Based on the MIPS
implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:14:12 +09:00
Paul Mundt
7747b9a493 sh: Wire up clear_user_highpage().
With the kmap_coherent() API in place, this is trivial to implement,
and lets us avoid the cache flush in certain cases.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:14:12 +09:00
Paul Mundt
f966918724 sh: Kill off the remaining ST40 cruft.
The ST40 stuff in-tree hasn't built for some time, and hasn't been
updated for over 3 years. ST maintains their own out-of-tree changes
and rebases occasionally, and that's ultimately where all of the ST40
users go anyways.

In order for the ST40 code to be brought up to date most of the stuff
removed in this changeset would have to be rewritten anyways, so there's
very little benefit in keeping the remnants around either.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Paul Mundt
98366c20a2 sh: Add -Werror for clean directories.
Follow the MIPS and sparc64 changes for -Werror instrumentation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Stuart Menefy
0e670685e4 sh: Fix optimized __copy_user() movca.l usage.
movca.l is restricted to SH-4 and up only, though compilers that
are unable to support ISA tuning (especially older versions of
binutils) will happily compile in the bogus opcode on older parts.

Conditionalize it to fix SH-3 regressions noted by Kristoffer.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-02 12:14:09 +09:00
Serge E. Hallyn
b460cbc581 pid namespaces: define is_global_init() and is_container_init()
is_init() is an ambiguous name for the pid==1 check.  Split it into
is_global_init() and is_container_init().

A cgroup init has it's tsk->pid == 1.

A global init also has it's tsk->pid == 1 and it's active pid namespace
is the init_pid_ns.  But rather than check the active pid namespace,
compare the task structure with 'init_pid_ns.child_reaper', which is
initialized during boot to the /sbin/init process and never changes.

Changelog:

	2.6.22-rc4-mm2-pidns1:
	- Use 'init_pid_ns.child_reaper' to determine if a given task is the
	  global init (/sbin/init) process. This would improve performance
	  and remove dependence on the task_pid().

	2.6.21-mm2-pidns2:

	- [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc,
	  ppc,avr32}/traps.c for the _exception() call to is_global_init().
	  This way, we kill only the cgroup if the cgroup's init has a
	  bug rather than force a kernel panic.

[akpm@linux-foundation.org: fix comment]
[sukadev@us.ibm.com: Use is_global_init() in arch/m32r/mm/fault.c]
[bunk@stusta.de: kernel/pid.c: remove unused exports]
[sukadev@us.ibm.com: Fix capability.c to work with threaded init]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: Pavel Emelianov <xemul@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Herbert Poetzel <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:37 -07:00
Ralf Baechle
622a9edd91 Remove dma_cache_(wback|inv|wback_inv) functions
dma_cache_(wback|inv|wback_inv) were the earliest attempt on a generalized
cache managment API for I/O purposes.  Originally it was basically the raw
MIPS low level cache API exported to the entire world.  The API has
suffered from a lack of documentation, was not very widely used unlike it's
more modern brothers and can easily be replaced by dma_cache_sync.  So
remove it rsp.  turn the surviving bits back into an arch private API, as
discussed on linux-arch.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Kyle McMartin <kyle@parisc-linux.org>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:57 -07:00
Christoph Lameter
4ba9b9d0ba Slab API: remove useless ctor parameter and reorder parameters
Slab constructors currently have a flags parameter that is never used.  And
the order of the arguments is opposite to other slab functions.  The object
pointer is placed before the kmem_cache pointer.

Convert

        ctor(void *object, struct kmem_cache *s, unsigned long flags)

to

        ctor(struct kmem_cache *s, void *object)

throughout the kernel

[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:45 -07:00
KAMEZAWA Hiroyuki
48e94196a5 fix memory hot remove not configured case.
Now, arch dependent code around CONFIG_MEMORY_HOTREMOVE is a mess.
This patch cleans up them. This is against 2.6.23-rc6-mm1.

 - fix compile failure on ia64/ CONFIG_MEMORY_HOTPLUG && !CONFIG_MEMORY_HOTREMOVE case.
 - For !CONFIG_MEMORY_HOTREMOVE, add generic no-op remove_memory(),
   which returns -EINVAL.
 - removed remove_pages() only used in powerpc.
 - removed no-op remove_memory() in i386, sh, sparc64, x86_64.

 - only powerpc returns -ENOSYS at memory hot remove(no-op). changes it
   to return -EINVAL.

Note:
Currently, only ia64 supports CONFIG_MEMORY_HOTREMOVE. I welcome other
archs if there are requirements and testers.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:02 -07:00
Will Schmidt
dcca2bde4f During VM oom condition, kill all threads in process group
We have had complaints where a threaded application is left in a bad state
after one of it's threads is killed when we hit a VM: out_of_memory
condition.

Killing just one of the process threads can leave the application in a bad
state, whereas killing the entire process group would allow for the
application to restart, or be otherwise handled, and makes it very obvious
that something has gone wrong.

This change allows the entire process group to be taken down, rather
than just the one thread.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:52 -07:00
Stuart Menefy
023ef184ff sh: __copy_user() optimizations for small copies.
This implements a fast-path for small (less than 12 bytes) copies,
with the existing path treated as the slow-path and left as the default
behaviour for all other copy sizes.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-28 12:36:35 +09:00
Paul Mundt
c3af39758c sh: Support extended mode TLB on SH-X3.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27 18:08:46 +09:00
Paul Mundt
dc47e9dd41 sh: Bump MAX_ACTIVE_REGIONS for SH7785.
When using URAM in NUMA mode another active region is needed.
Bump this up so we don't trigger the region truncation in
add_active_range().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27 16:48:00 +09:00
Paul Mundt
4d2cab7c00 sh: Disable 4kB pages on extended mode TLB.
4kB pages are unstable on extended mode TLB, it's recommended
that TLB compat mode be used when using a 4kB PAGE_SIZE. Set
the default for extended mode to 8kB.

This should have negligible impact, as other than the extra swap
cache entry bits, there's no reason to use the extended mode TLB
with 4kB pages.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27 10:47:00 +09:00
Paul Mundt
e71cf2b63c sh: Revert incorrect license string changes.
These were right the first time. Either a thinko or
building in the wrong tree. Revert this.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24 17:49:51 +09:00
Paul Mundt
ab27f62002 sh: Calculate cache aliases on L2 caches.
Calculate the number of cache aliases on probed L2 caches, and while
we're at it, print out the detected statistics at boot time for these
also.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24 17:00:45 +09:00
Paul Mundt
8328a8ba92 sh: nommu: Kill off dummy page fault ops for SH-3/4.
We stopped referencing these functions unconditionally when the
old entry.S code was refactored, so this is just dead code at
present. Kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24 16:40:56 +09:00
Paul Mundt
d10040f7eb sh: Fix alias calculation for non-aliasing cases.
There was an off-by-1 on the cache alias detection logic on SH-4,
which caused n_aliases to always be 1 even when the page size
precluded the existence of aliases.

With this corrected, 64KB pages happily reports n_aliases == 0, and
hits the appropriate fast paths in the flushing routines.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24 16:38:25 +09:00
Paul Mundt
1a442fe02d sh: Initial SH-X3 SMP support.
This adds basic support for SH-X3 SMP (4 CPUs).

More IPI and cache debugging is necessary, mostly interfacing the
d-cache coherency and the I-cache broadcast invalidates. Only for
testing at present!

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 19:16:05 +09:00
Paul Mundt
7ec9d6f8c0 sh: Avoid smp_processor_id() in cache desc paths.
current_cpu_data uses smp_processor_id() in order to find the
corresponding cpu_data. As the cache descs are all currently
identical, just have this look at probed results from the boot
CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 18:05:20 +09:00
Paul Mundt
d04a0f79f5 sh: Fix up extended mode TLB for SH-X2+ cores.
The extended mode TLB requires both 64-bit PTEs and a 64-bit pgprot,
correspondingly, the PGD also has to be 64-bits, so fix that up.

The kernel and user permission bits really are decoupled in early
cuts of the silicon, which means that we also have to set corresponding
kernel permissions on user pages or we end up with user pages that the
kernel simply can't touch (!).

Finally, with those things corrected, really enable MMUCR.ME and
correct the PTEA value (this simply needs to be the upper 32-bits
of the PTE, with the size and protection bit encoding).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:55 +09:00
Paul Mundt
db2504966c sh: Wire up URAM node on SH7785.
Add SH7785 URAM as node 1, follows the SH-X3 change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:55 +09:00
Paul Mundt
1db4e9bb56 sh: Don't enable FPU for SH4AL-DSP.
This leads to invalid configurations where both FPU and DSP support
can be enabled in the same kernel, resulting in build failure.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:53 +09:00
Paul Mundt
3d73e53870 sh: nommu fault handler needs signal.h.
Trivial build fix.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:52 +09:00
Magnus Damm
5cbc3af521 sh: minor fixes
This patch contains the following fixes:
- Adds sh7785 support to CONFIG_EARLY_SCIF_CONSOLE_PORT.
- Removes duplicate include from rts7751r2d irq code.
- Removes CONFIG_CPU_HAS_INTC from sh7720 Kconfig entry.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:52 +09:00
Magnus Damm
1254d1db11 sh: remove CONFIG_CPU_HAS_INTC_IRQ
All processor specific interrupt code is now converted to make use
of the new intc code. The config option CONFIG_CPU_HAS_INTC_IRQ is
because of that pointless.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:51 +09:00
Paul Mundt
2d009328db sh: More license string silliness.
'GPL v2' vs 'GPLv2'.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:51 +09:00