This fixes three issues noticed by Arnd Bergmann:
- Add #ifdef __KERNEL__ and move some things around in perf_counter.h
to make sure only the bits that userspace needs are exported to
userspace.
- Use __u64, __s64, __u32 types in the structs exported to userspace
rather than u64, s64, u32.
- Make the sys_perf_counter_open syscall available to the SPUs on
Cell platforms.
And one issue that I noticed in looking at the code again:
- Wrap the perf_counter_open syscall with SYSCALL_DEFINE4 so we get
the proper handling of int arguments on ppc64 (and some other 64-bit
architectures).
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds the back-end for the PMU on the POWER5 processor. This knows
how to use the fixed-function PMC5 and PMC6 (instructions completed and
run cycles). Unlike POWER6, PMC5/6 obey the freeze conditions and can
generate interrupts, so their use doesn't impose any extra restrictions.
POWER5+ is different and is not supported by this patch.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This avoids a lockdep warning from:
if (DEBUG_LOCKS_WARN_ON(unlikely(!early_boot_irqs_enabled)))
return;
in trace_hardirqs_on_caller();
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make io_mapping_create_wc and io_mapping_free go through PAT to make sure
that there are no memory type aliases.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
io_mapping_create_wc should take a resource_size_t parameter in place of
unsigned long. With unsigned long, there will be no way to map greater than 4GB
address in i386/32 bit.
On x86, greater than 4GB addresses cannot be mapped on i386 without PAE. Return
error for such a case.
Patch also adds a structure for io_mapping, that saves the base, size and
type on HAVE_ATOMIC_IOMAP archs, that can be used to verify the offset on
io_mapping_map calls.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a function to check and keep identity maps in sync, when changing
any memory type. One of the follow on patches will also use this
routine.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
io_mapping_create_wc can return NULL on error and io_mapping_free() should be
called on one of the error-cleanup path.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- print test pattern instead of pattern number,
- show pattern as stored in memory,
- use proper priority flags,
- consistent use of u64 throughout the code
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix unexpected behaviour when pattern number is out of range
Current implementation provides 4 patterns for memtest. The code doesn't
check whether the memtest parameter value exceeds the maximum pattern number.
Instead the memtest code pretends to test with non-existing patterns, e.g.
when booting with memtest=10 I've observed the following
...
early_memtest: pattern num 10
0000001000 - 0000006000 pattern 0
...
0000001000 - 0000006000 pattern 1
...
0000001000 - 0000006000 pattern 2
...
0000001000 - 0000006000 pattern 3
...
0000001000 - 0000006000 pattern 4
...
0000001000 - 0000006000 pattern 5
...
0000001000 - 0000006000 pattern 6
...
0000001000 - 0000006000 pattern 7
...
0000001000 - 0000006000 pattern 8
...
0000001000 - 0000006000 pattern 9
...
But in fact Linux didn't test anything for patterns > 4 as the default
case in memtest() is to leave the function.
I suggest to use the memtest parameter as the number of tests to be
performed and to re-iterate over all existing patterns.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make more types of copies non-temporal
This change makes the following simple fix:
30d697f: x86: fix performance regression in write() syscall
A bit more sophisticated: we check the 'total' number of bytes
written to decide whether to copy in a cached or a non-temporal
way.
This will for example cause the tail (modulo 4096 bytes) chunk
of a large write() to be non-temporal too - not just the page-sized
chunks.
Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, enable future change
Add a 'total bytes copied' parameter to __copy_from_user_*nocache(),
and update all the callsites.
The parameter is not used yet - architecture code can use it to
more intelligently decide whether the copy should be cached or
non-temporal.
Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: defconfig change
Enable MCE in the 64-bit defconfig.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
Add i2c_board_info for RiscPC PCF8583
i2c: Make sure i2c_algo_bit_data.timeout is HZ-independent
i2c-dev: Clarify the unit of ioctl I2C_TIMEOUT
i2c: Timeouts reach -1
i2c: Fix misplaced parentheses
* 'firedtv-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firedtv: dvb_frontend_info for FireDTV S2, fix "frequency limits undefined" error
firedtv: massive refactoring
firedtv: rename files, variables, functions from firesat to firedtv
firedtv: Use DEFINE_SPINLOCK
firedtv: fix registration - adapter number could only be zero
firedtv: use length_field() of PMT as length
firedtv: fix returned struct for ca_info
firedtv: cleanups and minor fixes
ieee1394: remove superfluous assertions
ieee1394: inherit ud vendor_id from node vendor_id
ieee1394: add hpsb_node_read() and hpsb_node_lock()
ieee1394: use correct barrier types between accesses of nodeid and generation
firesat: copyrights, rename to firedtv, API conversions, fix remote control input
firesat: avc resend
firesat: update isochronous interface, add CI support
firesat: add DVB-S support for DVB-S2 devices
firesat: fix DVB-S2 device recognition
DVB: add firesat driver
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Fix deadlock in ext4_write_begin() and ext4_da_write_begin()
ext4: Add fallback for find_group_flex
The ones which go only into struct genapic are de-inlined
by compiler anyway, so remove the inline specifier from them.
Afterwards, remove summit_setup_portio_remap completely as it
is unused.
Remove inline also from summit_cpu_mask_to_apicid, since it's
not worth it (it is used in struct genapic too).
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use BAD_APICID instead of 0xFF constants in summit_cpu_mask_to_apicid.
Also remove bogus comments about what we actually return.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This was changed to a physmap_t giving a clashing symbol redefinition,
but actually using a physmap_t consumes rather a lot of space on x86,
so stick with a private copy renamed with a voyager_ prefix and made
static. Nothing outside of the Voyager code uses it, anyway.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Add the necessary i2c_board_info structure to fix the lack of PCF8583
RTC on RiscPC.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
i2c_algo_bit_data.timeout is supposed to be in jiffies, so drivers
should use set this value in terms of HZ.
Ultimately I think this field should be discarded in favor of
i2c_adapter.timeout, but that's left for a future patch.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Lennert Buytenhek <kernel@wantstofly.org>
Acked-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
The unit in which user-space can set the bus timeout value is jiffies
for historical reasons (back when HZ was always 100.) This is however
not good because user-space doesn't know how long a jiffy lasts. The
timeout value should instead be set in a fixed time unit. Given the
original value of HZ, this unit should be 10 ms, for compatibility.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
With a postfix decrement these timeouts reach -1 rather than 0, but
after the loop it is tested whether they have become 0.
As pointed out by Jean Delvare, the condition we are waiting for should
also be tested before the timeout. With the current order, you could
exit with a timeout error while the job is actually done.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
native_usergs_sysret64 is described as
extern void native_usergs_sysret64(void)
so lets add ENDPROC here
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
NEXT_PAGE already has 'balign' so no
need to keep this redundant one.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I found that the function fdtv_frontend_init in the file firedtv-fe.c was
missing a case for FIREDTV_DVB_S2 which resulted in "frequency limits
undefined" errors in syslog.
Signed-off-by: Beat Michel Liechti <bml303@gmail.com>
Change by Stefan R: combine it with case case FIREDTV_DVB_S as
originally suggested by Beat Michel. This enables FE_CAN_FEC_AUTO also
for FireDTV-S2 devices which is possible as long as only DVB-S channels
are used. FE_CAN_FEC_AUTO would be wrong for DVB-S2 channels, but those
cannot be used yet since the driver is not yet converted to S2API.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
While the introduction of __copy_from_user_nocache (see commit:
0812a579c9) may have been an improvement
for sufficiently large writes, there is evidence to show that it is
deterimental for small writes. Unixbench's fstime test gives the
following results for 256 byte writes with MAX_BLOCK of 2000:
2.6.29-rc6 ( 5 samples, each in KB/sec ):
283750, 295200, 294500, 293000, 293300
2.6.29-rc6 + this patch (5 samples, each in KB/sec):
313050, 3106750, 293350, 306300, 307900
2.6.18
395700, 342000, 399100, 366050, 359850
See w_test() in src/fstime.c in unixbench version 4.1.0. Basically, the above test
consists of counting how much we can write in this manner:
alarm(10);
while (!sigalarm) {
for (f_blocks = 0; f_blocks < 2000; ++f_blocks) {
write(f, buf, 256);
}
lseek(f, 0L, 0);
}
Note, there are other components to the write syscall regression
that are not addressed here.
Signed-off-by: Salman Qazi <sqazi@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
