[MIPS] MIPSsim: Move code away from the other MIPS Inc. BSP code.

It shares no code at all.  While at it also fix up the beginning bitrot.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -251,6 +251,7 @@ config MIPS_SIM
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This option enables support for MIPS Technologies MIPSsim software

arch/mips/Makefile

@@ -327,7 +327,7 @@ load-$(CONFIG_MIPS_SEAD)	+= 0xffffffff80100000
 #
 # MIPS SIM
 #
-core-$(CONFIG_MIPS_SIM)		+= arch/mips/mips-boards/sim/
+core-$(CONFIG_MIPS_SIM)		+= arch/mips/mipssim/
 cflags-$(CONFIG_MIPS_SIM)	+= -Iinclude/asm-mips/mach-sim
 load-$(CONFIG_MIPS_SIM)		+= 0x80100000
 

arch/mips/kernel/head.S

@@ -138,15 +138,14 @@
 EXPORT(stext)					# used for profiling
 EXPORT(_stext)
 
-#ifdef CONFIG_MIPS_SIM
+#ifndef CONFIG_MIPS_SIM
 	/*
 	 * Give us a fighting chance of running if execution beings at the
 	 * kernel load address.  This is needed because this platform does
 	 * not have a ELF loader yet.
 	 */
-	j	kernel_entry
-#endif
 	__INIT
+#endif
 
 NESTED(kernel_entry, 16, sp)			# kernel entry point
 
@@ -197,9 +196,7 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 	j		start_kernel
 	END(kernel_entry)
 
-#ifdef CONFIG_QEMU
 	__INIT
-#endif
 
 #ifdef CONFIG_SMP
 /*

arch/mips/mipssim/sim_console.c

@@ -18,8 +18,8 @@
  *   written by Ralf Baechle
  */
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/serial_reg.h>
-#include <asm/io.h>
 
 static inline unsigned int serial_in(int offset)
 {

arch/mips/mipssim/sim_int.c

@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 1999, 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <asm/mips-boards/simint.h>
+#include <asm/irq_cpu.h>
+
+static inline int clz(unsigned long x)
+{
+	__asm__ (
+	"	.set	push					\n"
+	"	.set	mips32					\n"
+	"	clz	%0, %1					\n"
+	"	.set	pop					\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+
+/*
+ * Version of ffs that only looks at bits 12..15.
+ */
+static inline unsigned int irq_ffs(unsigned int pending)
+{
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+	return -clz(pending) + 31 - CAUSEB_IP;
+#else
+	unsigned int a0 = 7;
+	unsigned int t0;
+
+	t0 = s0 & 0xf000;
+	t0 = t0 < 1;
+	t0 = t0 << 2;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
+
+	t0 = s0 & 0xc000;
+	t0 = t0 < 1;
+	t0 = t0 << 1;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
+
+	t0 = s0 & 0x8000;
+	t0 = t0 < 1;
+	/* t0 = t0 << 2; */
+	a0 = a0 - t0;
+	/* s0 = s0 << t0; */
+
+	return a0;
+#endif
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+	int irq;
+
+	irq = irq_ffs(pending);
+
+	if (irq > 0)
+		do_IRQ(MIPSCPU_INT_BASE + irq);
+	else
+		spurious_interrupt();
+}
+
+void __init arch_init_irq(void)
+{
+	mips_cpu_irq_init();
+}

arch/mips/mipssim/sim_mem.c

@@ -95,7 +95,7 @@ void __init prom_meminit(void)
 		size = p->size;
 
 		add_memory_region(base, size, type);
-                p++;
+		p++;
 	}
 }
 

arch/mips/mipssim/sim_setup.c

@@ -19,18 +19,18 @@
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/irq.h>
 #include <linux/ioport.h>
+#include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
-#include <asm/irq.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/prom.h>
-#include <asm/serial.h>
-#include <asm/io.h>
 #include <asm/time.h>
 #include <asm/mips-boards/sim.h>
 #include <asm/mips-boards/simint.h>
@@ -62,7 +62,7 @@ void __init plat_mem_setup(void)
 #endif
 }
 
-void prom_init(void)
+void __init prom_init(void)
 {
 	set_io_port_base(0xbfd00000);
 

arch/mips/mipssim/sim_smp.c

@@ -22,13 +22,13 @@
 #include <linux/sched.h>
 #include <linux/cpumask.h>
 #include <linux/interrupt.h>
+#include <linux/smp.h>
+
 #include <asm/atomic.h>
 #include <asm/cpu.h>
 #include <asm/processor.h>
 #include <asm/system.h>
-#include <asm/hardirq.h>
 #include <asm/mmu_context.h>
-#include <asm/smp.h>
 #ifdef CONFIG_MIPS_MT_SMTC
 #include <asm/smtc_ipi.h>
 #endif /* CONFIG_MIPS_MT_SMTC */
@@ -73,11 +73,19 @@ void prom_init_secondary(void)
 #endif /* CONFIG_MIPS_MT_SMTC */
 }
 
+void plat_smp_setup(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	if (read_c0_config3() & (1 << 2))
+		mipsmt_build_cpu_map(0);
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
 /*
  * Platform SMP pre-initialization
  */
 
-void prom_prepare_cpus(unsigned int max_cpus)
+void plat_prepare_cpus(unsigned int max_cpus)
 {
 #ifdef CONFIG_MIPS_MT_SMTC
 	/*
@@ -85,8 +93,8 @@ void prom_prepare_cpus(unsigned int max_cpus)
 	 * but it may be multithreaded.
 	 */
 
-	if (read_c0_config3() & (1<<2)) {
-		mipsmt_prepare_cpus(max_cpus);
+	if (read_c0_config3() & (1 << 2)) {
+		mipsmt_prepare_cpus();
 	}
 #endif /* CONFIG_MIPS_MT_SMTC */
 }

arch/mips/mipssim/sim_time.c

@@ -5,10 +5,10 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/mc146818rtc.h>
+#include <linux/mipsregs.h>
+#include <linux/smp.h>
 #include <linux/timex.h>
 
-#include <asm/mipsregs.h>
-#include <asm/ptrace.h>
 #include <asm/hardirq.h>
 #include <asm/div64.h>
 #include <asm/cpu.h>
@@ -16,7 +16,6 @@
 #include <asm/irq.h>
 #include <asm/mc146818-time.h>
 #include <asm/msc01_ic.h>
-#include <asm/smp.h>
 
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/prom.h>
@@ -37,8 +36,7 @@ irqreturn_t sim_timer_interrupt(int irq, void *dev_id)
 #ifndef CONFIG_MIPS_MT_SMTC
 	if (cpu == 0) {
 		timer_interrupt(irq, dev_id);
-	}
-	else {
+	} else {
 		/* Everyone else needs to reset the timer int here as
 		   ll_local_timer_interrupt doesn't */
 		/*
@@ -76,8 +74,10 @@ irqreturn_t sim_timer_interrupt(int irq, void *dev_id)
 	irq_enable_hazard();
 	evpe(vpflags);
 
-	if(cpu_data[cpu].vpe_id == 0) timer_interrupt(irq, dev_id);
-	else write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
+	if (cpu_data[cpu].vpe_id == 0)
+		timer_interrupt(irq, dev_id);
+	else
+		write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
 	smtc_timer_broadcast(cpu_data[cpu].vpe_id);
 
 #endif /* CONFIG_MIPS_MT_SMTC */
@@ -85,7 +85,8 @@ irqreturn_t sim_timer_interrupt(int irq, void *dev_id)
 	/*
 	 * every CPU should do profiling and process accounting
 	 */
- 	local_timer_interrupt (irq, dev_id);
+	local_timer_interrupt (irq, dev_id);
+
 	return IRQ_HANDLED;
 #else
 	return timer_interrupt (irq, dev_id);
@@ -152,17 +153,15 @@ void __init sim_time_init(void)
 
 	local_irq_save(flags);
 
-
-        /* Set Data mode - binary. */
+	/* Set Data mode - binary. */
 	CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
 
-
 	est_freq = estimate_cpu_frequency ();
 
-	printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
-	       (est_freq%1000000)*100/1000000);
+	printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
+	       (est_freq % 1000000) * 100 / 1000000);
 
-        cpu_khz = est_freq / 1000;
+	cpu_khz = est_freq / 1000;
 
 	local_irq_restore(flags);
 }
@@ -180,8 +179,7 @@ void __init plat_timer_setup(struct irqaction *irq)
 	if (cpu_has_veic) {
 		set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
 		mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
-	}
-	else {
+	} else {
 		if (cpu_has_vint)
 			set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
 		mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;