Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
  [SCSI] aic94xx: fix section mismatch
  [SCSI] u14-34f: Fix 32bit only problem
  [SCSI] dpt_i2o: sysfs code
  [SCSI] dpt_i2o: 64 bit support
  [SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt to dma_alloc_coherent
  [SCSI] dpt_i2o: use standard __init / __exit code
  [SCSI] megaraid_sas: fix suspend/resume sections
  [SCSI] aacraid: Add Power Management support
  [SCSI] aacraid: Fix jbod operations scan issues
  [SCSI] aacraid: Fix warning about macro side-effects
  [SCSI] add support for variable length extended commands
  [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer
  [SCSI] bsg: add large command support
  [SCSI] aacraid: Fix down_interruptible() to check the return value correctly
  [SCSI] megaraid_sas; Update the Version and Changelog
  [SCSI] ibmvscsi: Handle non SCSI error status
  [SCSI] bug fix for free list handling
  [SCSI] ipr: Rename ipr's state scsi host attribute to prevent collisions
  [SCSI] megaraid_mbox: fix Dell CERC firmware problem

Documentation/scsi/ChangeLog.megaraid_sas

@@ -1,3 +1,25 @@
+1 Release Date    : Mon. March 10 11:02:31 PDT 2008 -
+			(emaild-id:megaraidlinux@lsi.com)
+			Sumant Patro
+			Bo Yang
+
+2 Current Version : 00.00.03.20-RC1
+3 Older Version   : 00.00.03.16
+
+1. Rollback the sense info implementation
+	Sense buffer ptr data type in the ioctl path is reverted back
+	to u32 * as in previous versions of driver.
+
+2. Fixed the driver frame count.
+	When Driver sent wrong frame count to firmware.  As this
+	particular command is sent to drive, FW is seeing continuous
+	chip resets and so the command will timeout.
+
+3. Add the new controller(1078DE) support to the driver
+	and Increase the max_wait to 60 from 10 in the controller
+	operational status.  With this max_wait increase, driver will
+	make sure the FW will 	finish the pending cmd for KDUMP case.
+
 1 Release Date    : Thur. Nov. 07 16:30:43 PST 2007 -
 			(emaild-id:megaraidlinux@lsi.com)
 			Sumant Patro

block/bsg.c

@@ -174,7 +174,11 @@ static int bsg_io_schedule(struct bsg_device *bd)
 static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
 				struct sg_io_v4 *hdr, int has_write_perm)
 {
-	memset(rq->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */
+	if (hdr->request_len > BLK_MAX_CDB) {
+		rq->cmd = kzalloc(hdr->request_len, GFP_KERNEL);
+		if (!rq->cmd)
+			return -ENOMEM;
+	}
 
 	if (copy_from_user(rq->cmd, (void *)(unsigned long)hdr->request,
 			   hdr->request_len))
@@ -211,8 +215,6 @@ bsg_validate_sgv4_hdr(struct request_queue *q, struct sg_io_v4 *hdr, int *rw)
 
 	if (hdr->guard != 'Q')
 		return -EINVAL;
-	if (hdr->request_len > BLK_MAX_CDB)
-		return -EINVAL;
 	if (hdr->dout_xfer_len > (q->max_sectors << 9) ||
 	    hdr->din_xfer_len > (q->max_sectors << 9))
 		return -EIO;
@@ -302,6 +304,8 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr)
 	}
 	return rq;
 out:
+	if (rq->cmd != rq->__cmd)
+		kfree(rq->cmd);
 	blk_put_request(rq);
 	if (next_rq) {
 		blk_rq_unmap_user(next_rq->bio);
@@ -455,6 +459,8 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr,
 		ret = rq->errors;
 
 	blk_rq_unmap_user(bio);
+	if (rq->cmd != rq->__cmd)
+		kfree(rq->cmd);
 	blk_put_request(rq);
 
 	return ret;

block/scsi_ioctl.c

@@ -33,13 +33,12 @@
 #include <scsi/scsi_cmnd.h>
 
 /* Command group 3 is reserved and should never be used.  */
-const unsigned char scsi_command_size[8] =
+const unsigned char scsi_command_size_tbl[8] =
 {
 	6, 10, 10, 12,
 	16, 12, 10, 10
 };
-
+EXPORT_SYMBOL(scsi_command_size_tbl);
-EXPORT_SYMBOL(scsi_command_size);
 
 #include <scsi/sg.h>
 

drivers/firewire/fw-sbp2.c

@@ -1487,7 +1487,7 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 	if (scsi_sg_count(cmd) && sbp2_map_scatterlist(orb, device, lu) < 0)
 		goto out;
 
-	memcpy(orb->request.command_block, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
+	memcpy(orb->request.command_block, cmd->cmnd, cmd->cmd_len);
 
 	orb->base.callback = complete_command_orb;
 	orb->base.request_bus =

drivers/s390/scsi/zfcp_dbf.c

@@ -1055,7 +1055,7 @@ static void zfcp_scsi_dbf_event(const char *tag, const char *tag2, int level,
 				rec->scsi_result = scsi_cmnd->result;
 				rec->scsi_cmnd = (unsigned long)scsi_cmnd;
 				rec->scsi_serial = scsi_cmnd->serial_number;
-				memcpy(rec->scsi_opcode, &scsi_cmnd->cmnd,
+				memcpy(rec->scsi_opcode, scsi_cmnd->cmnd,
 					min((int)scsi_cmnd->cmd_len,
 						ZFCP_DBF_SCSI_OPCODE));
 				rec->scsi_retries = scsi_cmnd->retries;

drivers/s390/scsi/zfcp_fsf.c

@@ -4014,7 +4014,7 @@ zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req)
 		ZFCP_LOG_TRACE("scpnt->result =0x%x, command was:\n",
 			       scpnt->result);
 		ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE,
-			      (void *) &scpnt->cmnd, scpnt->cmd_len);
+			      scpnt->cmnd, scpnt->cmd_len);
 
 		ZFCP_LOG_TRACE("%i bytes sense data provided by FCP\n",
 			       fcp_rsp_iu->fcp_sns_len);

drivers/scsi/53c700.c

@@ -599,7 +599,7 @@ NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata,
 			(struct NCR_700_command_slot *)SCp->host_scribble;
 		
 		dma_unmap_single(hostdata->dev, slot->pCmd,
-				 sizeof(SCp->cmnd), DMA_TO_DEVICE);
+				 MAX_COMMAND_SIZE, DMA_TO_DEVICE);
 		if (slot->flags == NCR_700_FLAG_AUTOSENSE) {
 			char *cmnd = NCR_700_get_sense_cmnd(SCp->device);
 #ifdef NCR_700_DEBUG
@@ -1004,7 +1004,7 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
 				 * here */
 				NCR_700_unmap(hostdata, SCp, slot);
 				dma_unmap_single(hostdata->dev, slot->pCmd,
-						 sizeof(SCp->cmnd),
+						 MAX_COMMAND_SIZE,
 						 DMA_TO_DEVICE);
 
 				cmnd[0] = REQUEST_SENSE;
@@ -1901,7 +1901,7 @@ NCR_700_queuecommand(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
 	}
 	slot->resume_offset = 0;
 	slot->pCmd = dma_map_single(hostdata->dev, SCp->cmnd,
-				    sizeof(SCp->cmnd), DMA_TO_DEVICE);
+				    MAX_COMMAND_SIZE, DMA_TO_DEVICE);
 	NCR_700_start_command(SCp);
 	return 0;
 }

drivers/scsi/Kconfig

@@ -504,10 +504,9 @@ config SCSI_AIC7XXX_OLD
 source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
 source "drivers/scsi/aic94xx/Kconfig"
 
-# All the I2O code and drivers do not seem to be 64bit safe.
 config SCSI_DPT_I2O
 	tristate "Adaptec I2O RAID support "
-	depends on !64BIT && SCSI && PCI && VIRT_TO_BUS
+	depends on SCSI && PCI && VIRT_TO_BUS
 	help
 	  This driver supports all of Adaptec's I2O based RAID controllers as 
 	  well as the DPT SmartRaid V cards.  This is an Adaptec maintained

drivers/scsi/a100u2w.c

@@ -895,7 +895,7 @@ static void inia100_build_scb(struct orc_host * host, struct orc_scb * scb, stru
 	} else {
 		scb->tag_msg = 0;	/* No tag support               */
 	}
-	memcpy(&scb->cdb[0], &cmd->cmnd, scb->cdb_len);
+	memcpy(scb->cdb, cmd->cmnd, scb->cdb_len);
 }
 
 /**

drivers/scsi/aacraid/aachba.c

@@ -498,6 +498,11 @@ static void _aac_probe_container2(void * context, struct fib * fibptr)
 		    (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
 		    (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
 			fsa_dev_ptr->valid = 1;
+			/* sense_key holds the current state of the spin-up */
+			if (dresp->mnt[0].state & cpu_to_le32(FSCS_NOT_READY))
+				fsa_dev_ptr->sense_data.sense_key = NOT_READY;
+			else if (fsa_dev_ptr->sense_data.sense_key == NOT_READY)
+				fsa_dev_ptr->sense_data.sense_key = NO_SENSE;
 			fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol);
 			fsa_dev_ptr->size
 			  = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
@@ -1509,20 +1514,35 @@ static void io_callback(void *context, struct fib * fibptr)
 	scsi_dma_unmap(scsicmd);
 
 	readreply = (struct aac_read_reply *)fib_data(fibptr);
-	if (le32_to_cpu(readreply->status) == ST_OK)
+	switch (le32_to_cpu(readreply->status)) {
-		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+	case ST_OK:
-	else {
+		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+			SAM_STAT_GOOD;
+		dev->fsa_dev[cid].sense_data.sense_key = NO_SENSE;
+		break;
+	case ST_NOT_READY:
+		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+			SAM_STAT_CHECK_CONDITION;
+		set_sense(&dev->fsa_dev[cid].sense_data, NOT_READY,
+		  SENCODE_BECOMING_READY, ASENCODE_BECOMING_READY, 0, 0);
+		memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
+		       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
+			     SCSI_SENSE_BUFFERSIZE));
+		break;
+	default:
 #ifdef AAC_DETAILED_STATUS_INFO
 		printk(KERN_WARNING "io_callback: io failed, status = %d\n",
 		  le32_to_cpu(readreply->status));
 #endif
-		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
+		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+			SAM_STAT_CHECK_CONDITION;
 		set_sense(&dev->fsa_dev[cid].sense_data,
 		  HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
 		  ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
 		memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
 		       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
 			     SCSI_SENSE_BUFFERSIZE));
+		break;
 	}
 	aac_fib_complete(fibptr);
 	aac_fib_free(fibptr);
@@ -1863,6 +1883,84 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd)
 	return SCSI_MLQUEUE_HOST_BUSY;
 }
 
+static void aac_start_stop_callback(void *context, struct fib *fibptr)
+{
+	struct scsi_cmnd *scsicmd = context;
+
+	if (!aac_valid_context(scsicmd, fibptr))
+		return;
+
+	BUG_ON(fibptr == NULL);
+
+	scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+
+	aac_fib_complete(fibptr);
+	aac_fib_free(fibptr);
+	scsicmd->scsi_done(scsicmd);
+}
+
+static int aac_start_stop(struct scsi_cmnd *scsicmd)
+{
+	int status;
+	struct fib *cmd_fibcontext;
+	struct aac_power_management *pmcmd;
+	struct scsi_device *sdev = scsicmd->device;
+	struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
+
+	if (!(aac->supplement_adapter_info.SupportedOptions2 &
+	      AAC_OPTION_POWER_MANAGEMENT)) {
+		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+				  SAM_STAT_GOOD;
+		scsicmd->scsi_done(scsicmd);
+		return 0;
+	}
+
+	if (aac->in_reset)
+		return SCSI_MLQUEUE_HOST_BUSY;
+
+	/*
+	 *	Allocate and initialize a Fib
+	 */
+	cmd_fibcontext = aac_fib_alloc(aac);
+	if (!cmd_fibcontext)
+		return SCSI_MLQUEUE_HOST_BUSY;
+
+	aac_fib_init(cmd_fibcontext);
+
+	pmcmd = fib_data(cmd_fibcontext);
+	pmcmd->command = cpu_to_le32(VM_ContainerConfig);
+	pmcmd->type = cpu_to_le32(CT_POWER_MANAGEMENT);
+	/* Eject bit ignored, not relevant */
+	pmcmd->sub = (scsicmd->cmnd[4] & 1) ?
+		cpu_to_le32(CT_PM_START_UNIT) : cpu_to_le32(CT_PM_STOP_UNIT);
+	pmcmd->cid = cpu_to_le32(sdev_id(sdev));
+	pmcmd->parm = (scsicmd->cmnd[1] & 1) ?
+		cpu_to_le32(CT_PM_UNIT_IMMEDIATE) : 0;
+
+	/*
+	 *	Now send the Fib to the adapter
+	 */
+	status = aac_fib_send(ContainerCommand,
+		  cmd_fibcontext,
+		  sizeof(struct aac_power_management),
+		  FsaNormal,
+		  0, 1,
+		  (fib_callback)aac_start_stop_callback,
+		  (void *)scsicmd);
+
+	/*
+	 *	Check that the command queued to the controller
+	 */
+	if (status == -EINPROGRESS) {
+		scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
+		return 0;
+	}
+
+	aac_fib_complete(cmd_fibcontext);
+	aac_fib_free(cmd_fibcontext);
+	return SCSI_MLQUEUE_HOST_BUSY;
+}
+
 /**
  *	aac_scsi_cmd()		-	Process SCSI command
  *	@scsicmd:		SCSI command block
@@ -1899,7 +1997,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
 			 *	If the target container doesn't exist, it may have
 			 *	been newly created
 			 */
-			if ((fsa_dev_ptr[cid].valid & 1) == 0) {
+			if (((fsa_dev_ptr[cid].valid & 1) == 0) ||
+			  (fsa_dev_ptr[cid].sense_data.sense_key ==
+			   NOT_READY)) {
 				switch (scsicmd->cmnd[0]) {
 				case SERVICE_ACTION_IN:
 					if (!(dev->raw_io_interface) ||
@@ -2091,8 +2191,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
 		scsi_sg_copy_from_buffer(scsicmd, cp, sizeof(cp));
 		/* Do not cache partition table for arrays */
 		scsicmd->device->removable = 1;
-
+		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
-		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+		  SAM_STAT_GOOD;
 		scsicmd->scsi_done(scsicmd);
 
 		return 0;
@@ -2187,15 +2287,32 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
 	 *	These commands are all No-Ops
 	 */
 	case TEST_UNIT_READY:
+		if (fsa_dev_ptr[cid].sense_data.sense_key == NOT_READY) {
+			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+				SAM_STAT_CHECK_CONDITION;
+			set_sense(&dev->fsa_dev[cid].sense_data,
+				  NOT_READY, SENCODE_BECOMING_READY,
+				  ASENCODE_BECOMING_READY, 0, 0);
+			memcpy(scsicmd->sense_buffer,
+			       &dev->fsa_dev[cid].sense_data,
+			       min_t(size_t,
+				     sizeof(dev->fsa_dev[cid].sense_data),
+				     SCSI_SENSE_BUFFERSIZE));
+			scsicmd->scsi_done(scsicmd);
+			return 0;
+		}
+		/* FALLTHRU */
 	case RESERVE:
 	case RELEASE:
 	case REZERO_UNIT:
 	case REASSIGN_BLOCKS:
 	case SEEK_10:
-	case START_STOP:
 		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
 		scsicmd->scsi_done(scsicmd);
 		return 0;
+
+	case START_STOP:
+		return aac_start_stop(scsicmd);
 	}
 
 	switch (scsicmd->cmnd[0])

drivers/scsi/aacraid/aacraid.h

@@ -12,7 +12,7 @@
  *----------------------------------------------------------------------------*/
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 2455
+# define AAC_DRIVER_BUILD 2456
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
@@ -34,8 +34,8 @@
 #define CONTAINER_TO_ID(cont)		(cont)
 #define CONTAINER_TO_LUN(cont)		(0)
 
-#define aac_phys_to_logical(x)  (x+1)
+#define aac_phys_to_logical(x)  ((x)+1)
-#define aac_logical_to_phys(x)  (x?x-1:0)
+#define aac_logical_to_phys(x)  ((x)?(x)-1:0)
 
 /* #define AAC_DETAILED_STATUS_INFO */
 
@@ -424,6 +424,8 @@ struct aac_init
 	 */
 	__le32	InitFlags;	/* flags for supported features */
 #define INITFLAGS_NEW_COMM_SUPPORTED	0x00000001
+#define INITFLAGS_DRIVER_USES_UTC_TIME	0x00000010
+#define INITFLAGS_DRIVER_SUPPORTS_PM	0x00000020
 	__le32	MaxIoCommands;	/* max outstanding commands */
 	__le32	MaxIoSize;	/* largest I/O command */
 	__le32	MaxFibSize;	/* largest FIB to adapter */
@@ -867,8 +869,10 @@ struct aac_supplement_adapter_info
 };
 #define AAC_FEATURE_FALCON	cpu_to_le32(0x00000010)
 #define AAC_FEATURE_JBOD	cpu_to_le32(0x08000000)
-#define AAC_OPTION_MU_RESET	cpu_to_le32(0x00000001)
+/* SupportedOptions2 */
-#define AAC_OPTION_IGNORE_RESET	cpu_to_le32(0x00000002)
+#define AAC_OPTION_MU_RESET		cpu_to_le32(0x00000001)
+#define AAC_OPTION_IGNORE_RESET		cpu_to_le32(0x00000002)
+#define AAC_OPTION_POWER_MANAGEMENT	cpu_to_le32(0x00000004)
 #define AAC_SIS_VERSION_V3	3
 #define AAC_SIS_SLOT_UNKNOWN	0xFF
 
@@ -1148,6 +1152,7 @@ struct aac_dev
 #define		ST_DQUOT	69
 #define		ST_STALE	70
 #define		ST_REMOTE	71
+#define		ST_NOT_READY	72
 #define		ST_BADHANDLE	10001
 #define		ST_NOT_SYNC	10002
 #define		ST_BAD_COOKIE	10003
@@ -1269,6 +1274,18 @@ struct aac_synchronize_reply {
 	u8		data[16];
 };
 
+#define CT_POWER_MANAGEMENT	245
+#define CT_PM_START_UNIT	2
+#define CT_PM_STOP_UNIT		3
+#define CT_PM_UNIT_IMMEDIATE	1
+struct aac_power_management {
+	__le32		command;	/* VM_ContainerConfig */
+	__le32		type;		/* CT_POWER_MANAGEMENT */
+	__le32		sub;		/* CT_PM_* */
+	__le32		cid;
+	__le32		parm;		/* CT_PM_sub_* */
+};
+
 #define CT_PAUSE_IO    65
 #define CT_RELEASE_IO  66
 struct aac_pause {
@@ -1536,6 +1553,7 @@ struct aac_mntent {
 #define FSCS_NOTCLEAN	0x0001  /* fsck is necessary before mounting */
 #define FSCS_READONLY	0x0002	/* possible result of broken mirror */
 #define FSCS_HIDDEN	0x0004	/* should be ignored - set during a clear */
+#define FSCS_NOT_READY	0x0008	/* Array spinning up to fulfil request */
 
 struct aac_query_mount {
 	__le32		command;

drivers/scsi/aacraid/comminit.c

@@ -97,6 +97,8 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
 		init->InitFlags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
 		dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n"));
 	}
+	init->InitFlags |= cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME |
+				       INITFLAGS_DRIVER_SUPPORTS_PM);
 	init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
 	init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
 	init->MaxFibSize = cpu_to_le32(dev->max_fib_size);

drivers/scsi/aacraid/commsup.c

@@ -515,7 +515,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
 				}
 				udelay(5);
 			}
-		} else if (down_interruptible(&fibptr->event_wait) == 0) {
+		} else if (down_interruptible(&fibptr->event_wait)) {
 			fibptr->done = 2;
 			up(&fibptr->event_wait);
 		}
@@ -906,15 +906,22 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
 		case AifEnAddJBOD:
 		case AifEnDeleteJBOD:
 			container = le32_to_cpu(((__le32 *)aifcmd->data)[1]);
-			if ((container >> 28))
+			if ((container >> 28)) {
+				container = (u32)-1;
 				break;
+			}
 			channel = (container >> 24) & 0xF;
-			if (channel >= dev->maximum_num_channels)
+			if (channel >= dev->maximum_num_channels) {
+				container = (u32)-1;
 				break;
+			}
 			id = container & 0xFFFF;
-			if (id >= dev->maximum_num_physicals)
+			if (id >= dev->maximum_num_physicals) {
+				container = (u32)-1;
 				break;
+			}
 			lun = (container >> 16) & 0xFF;
+			container = (u32)-1;
 			channel = aac_phys_to_logical(channel);
 			device_config_needed =
 			  (((__le32 *)aifcmd->data)[0] ==
@@ -933,13 +940,18 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
 			case EM_DRIVE_REMOVAL:
 				container = le32_to_cpu(
 					((__le32 *)aifcmd->data)[2]);
-				if ((container >> 28))
+				if ((container >> 28)) {
+					container = (u32)-1;
 					break;
+				}
 				channel = (container >> 24) & 0xF;
-				if (channel >= dev->maximum_num_channels)
+				if (channel >= dev->maximum_num_channels) {
+					container = (u32)-1;
 					break;
+				}
 				id = container & 0xFFFF;
 				lun = (container >> 16) & 0xFF;
+				container = (u32)-1;
 				if (id >= dev->maximum_num_physicals) {
 					/* legacy dev_t ? */
 					if ((0x2000 <= id) || lun || channel ||
@@ -1025,9 +1037,10 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
 		break;
 	}
 
+	container = 0;
+retry_next:
 	if (device_config_needed == NOTHING)
-	for (container = 0; container < dev->maximum_num_containers;
+	for (; container < dev->maximum_num_containers; ++container) {
-	    ++container) {
 		if ((dev->fsa_dev[container].config_waiting_on == 0) &&
 			(dev->fsa_dev[container].config_needed != NOTHING) &&
 			time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT)) {
@@ -1110,6 +1123,11 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
 	}
 	if (device_config_needed == ADD)
 		scsi_add_device(dev->scsi_host_ptr, channel, id, lun);
+	if (channel == CONTAINER_CHANNEL) {
+		container++;
+		device_config_needed = NOTHING;
+		goto retry_next;
+	}
 }
 
 static int _aac_reset_adapter(struct aac_dev *aac, int forced)

drivers/scsi/aacraid/linit.c

@@ -401,6 +401,8 @@ static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev,
 static int aac_slave_configure(struct scsi_device *sdev)
 {
 	struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
+	if (aac->jbod && (sdev->type == TYPE_DISK))
+		sdev->removable = 1;
 	if ((sdev->type == TYPE_DISK) &&
 			(sdev_channel(sdev) != CONTAINER_CHANNEL) &&
 			(!aac->jbod || sdev->inq_periph_qual) &&
@@ -809,6 +811,12 @@ static ssize_t aac_show_flags(struct device *cdev,
 				"SAI_READ_CAPACITY_16\n");
 	if (dev->jbod)
 		len += snprintf(buf + len, PAGE_SIZE - len, "SUPPORTED_JBOD\n");
+	if (dev->supplement_adapter_info.SupportedOptions2 &
+		AAC_OPTION_POWER_MANAGEMENT)
+		len += snprintf(buf + len, PAGE_SIZE - len,
+				"SUPPORTED_POWER_MANAGEMENT\n");
+	if (dev->msi)
+		len += snprintf(buf + len, PAGE_SIZE - len, "PCI_HAS_MSI\n");
 	return len;
 }
 
@@ -1106,7 +1114,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
 	aac->pdev = pdev;
 	aac->name = aac_driver_template.name;
 	aac->id = shost->unique_id;
-	aac->cardtype =  index;
+	aac->cardtype = index;
 	INIT_LIST_HEAD(&aac->entry);
 
 	aac->fibs = kmalloc(sizeof(struct fib) * (shost->can_queue + AAC_NUM_MGT_FIB), GFP_KERNEL);
@@ -1146,19 +1154,19 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
 		goto out_deinit;
 
 	/*
- 	 * Lets override negotiations and drop the maximum SG limit to 34
+	 * Lets override negotiations and drop the maximum SG limit to 34
- 	 */
+	 */
 	if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) &&
 			(shost->sg_tablesize > 34)) {
 		shost->sg_tablesize = 34;
 		shost->max_sectors = (shost->sg_tablesize * 8) + 112;
- 	}
+	}
 
- 	if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) &&
+	if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) &&
 			(shost->sg_tablesize > 17)) {
 		shost->sg_tablesize = 17;
 		shost->max_sectors = (shost->sg_tablesize * 8) + 112;
- 	}
+	}
 
 	error = pci_set_dma_max_seg_size(pdev,
 		(aac->adapter_info.options & AAC_OPT_NEW_COMM) ?
@@ -1174,7 +1182,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
 	else
 		aac->printf_enabled = 0;
 
- 	/*
+	/*
 	 * max channel will be the physical channels plus 1 virtual channel
 	 * all containers are on the virtual channel 0 (CONTAINER_CHANNEL)
 	 * physical channels are address by their actual physical number+1

drivers/scsi/aic94xx/aic94xx_init.c

@@ -529,10 +529,10 @@ static void asd_remove_dev_attrs(struct asd_ha_struct *asd_ha)
 /* The first entry, 0, is used for dynamic ids, the rest for devices
  * we know about.
  */
-static struct asd_pcidev_struct {
+static const struct asd_pcidev_struct {
 	const char * name;
 	int (*setup)(struct asd_ha_struct *asd_ha);
-} asd_pcidev_data[] = {
+} asd_pcidev_data[] __devinitconst = {
 	/* Id 0 is used for dynamic ids. */
 	{ .name  = "Adaptec AIC-94xx SAS/SATA Host Adapter",
 	  .setup = asd_aic9410_setup
@@ -735,7 +735,7 @@ static int asd_unregister_sas_ha(struct asd_ha_struct *asd_ha)
 static int __devinit asd_pci_probe(struct pci_dev *dev,
 				   const struct pci_device_id *id)
 {
-	struct asd_pcidev_struct *asd_dev;
+	const struct asd_pcidev_struct *asd_dev;
 	unsigned asd_id = (unsigned) id->driver_data;
 	struct asd_ha_struct *asd_ha;
 	struct Scsi_Host *shost;

drivers/scsi/constants.c

@@ -28,7 +28,6 @@
 #define SERVICE_ACTION_OUT_12 0xa9
 #define SERVICE_ACTION_IN_16 0x9e
 #define SERVICE_ACTION_OUT_16 0x9f
-#define VARIABLE_LENGTH_CMD 0x7f
 
 
 
@@ -210,7 +209,7 @@ static void print_opcode_name(unsigned char * cdbp, int cdb_len)
 	cdb0 = cdbp[0];
 	switch(cdb0) {
 	case VARIABLE_LENGTH_CMD:
-		len = cdbp[7] + 8;
+		len = scsi_varlen_cdb_length(cdbp);
 		if (len < 10) {
 			printk("short variable length command, "
 			       "len=%d ext_len=%d", len, cdb_len);
@@ -300,7 +299,7 @@ static void print_opcode_name(unsigned char * cdbp, int cdb_len)
 	cdb0 = cdbp[0];
 	switch(cdb0) {
 	case VARIABLE_LENGTH_CMD:
-		len = cdbp[7] + 8;
+		len = scsi_varlen_cdb_length(cdbp);
 		if (len < 10) {
 			printk("short opcode=0x%x command, len=%d "
 			       "ext_len=%d", cdb0, len, cdb_len);
@@ -335,10 +334,7 @@ void __scsi_print_command(unsigned char *cdb)
 	int k, len;
 
 	print_opcode_name(cdb, 0);
-	if (VARIABLE_LENGTH_CMD == cdb[0])
+	len = scsi_command_size(cdb);
-		len = cdb[7] + 8;
-	else
-		len = COMMAND_SIZE(cdb[0]);
 	/* print out all bytes in cdb */
 	for (k = 0; k < len; ++k) 
 		printk(" %02x", cdb[k]);

drivers/scsi/dpt/dpti_ioctl.h

@@ -89,7 +89,7 @@ typedef struct {
 	int      njobs;            /* # of jobs sent to HA            */
 	int      qdepth;           /* Controller queue depth.         */
 	int      wakebase;         /* mpx wakeup base index.          */
-	uLONG    SGsize;           /* Scatter/Gather list size.       */
+	uINT     SGsize;           /* Scatter/Gather list size.       */
 	unsigned heads;            /* heads for drives on cntlr.      */
 	unsigned sectors;          /* sectors for drives on cntlr.    */
 	uCHAR    do_drive32;       /* Flag for Above 16 MB Ability    */
@@ -97,8 +97,8 @@ typedef struct {
 	char     idPAL[4];         /* 4 Bytes Of The ID Pal           */
 	uCHAR    primary;          /* 1 For Primary, 0 For Secondary  */
 	uCHAR    eataVersion;      /* EATA Version                    */
-	uLONG    cpLength;         /* EATA Command Packet Length      */
+	uINT     cpLength;         /* EATA Command Packet Length      */
-	uLONG    spLength;         /* EATA Status Packet Length       */
+	uINT     spLength;         /* EATA Status Packet Length       */
 	uCHAR    drqNum;           /* DRQ Index (0,5,6,7)             */
 	uCHAR    flag1;            /* EATA Flags 1 (Byte 9)           */
 	uCHAR    flag2;            /* EATA Flags 2 (Byte 30)          */
@@ -107,23 +107,23 @@ typedef struct {
 typedef struct {
 	uSHORT length;		// Remaining length of this
 	uSHORT drvrHBAnum;	// Relative HBA # used by the driver
-	uLONG baseAddr;		// Base I/O address
+	uINT baseAddr;		// Base I/O address
 	uSHORT blinkState;	// Blink LED state (0=Not in blink LED)
 	uCHAR pciBusNum;	// PCI Bus # (Optional)
 	uCHAR pciDeviceNum;	// PCI Device # (Optional)
 	uSHORT hbaFlags;	// Miscellaneous HBA flags
 	uSHORT Interrupt;	// Interrupt set for this device.
 #   if (defined(_DPT_ARC))
-	uLONG baseLength;
+	uINT baseLength;
 	ADAPTER_OBJECT *AdapterObject;
 	LARGE_INTEGER DmaLogicalAddress;
 	PVOID DmaVirtualAddress;
 	LARGE_INTEGER ReplyLogicalAddress;
 	PVOID ReplyVirtualAddress;
 #   else
-	uLONG reserved1;	// Reserved for future expansion
+	uINT reserved1;		// Reserved for future expansion
-	uLONG reserved2;	// Reserved for future expansion
+	uINT reserved2;		// Reserved for future expansion
-	uLONG reserved3;	// Reserved for future expansion
+	uINT reserved3;		// Reserved for future expansion
 #   endif
 } drvrHBAinfo_S;
 

drivers/scsi/dpt/dptsig.h

@@ -33,11 +33,7 @@
 /* to make sure we are talking the same size under all OS's     */
 typedef unsigned char sigBYTE;
 typedef unsigned short sigWORD;
-#if (defined(_MULTI_DATAMODEL) && defined(sun) && !defined(_ILP32))
+typedef unsigned int sigINT;
-typedef uint32_t sigLONG;
-#else
-typedef unsigned long sigLONG;
-#endif
 
 /*
  * use sigWORDLittleEndian for:
@@ -300,7 +296,7 @@ typedef struct dpt_sig {
     sigBYTE dsFiletype;          /* type of file */
     sigBYTE dsFiletypeFlags;     /* flags to specify load type, etc. */
     sigBYTE dsOEM;               /* OEM file was created for */
-    sigLONG dsOS;                /* which Operating systems */
+    sigINT  dsOS;                /* which Operating systems */
     sigWORD dsCapabilities;      /* RAID levels, etc. */
     sigWORD dsDeviceSupp;        /* Types of SCSI devices supported */
     sigWORD dsAdapterSupp;       /* DPT adapter families supported */

drivers/scsi/dpt/sys_info.h

@@ -145,8 +145,8 @@
    uCHAR        smartROMRevision;
    uSHORT       flags;                  /* See bit definitions above */
    uSHORT       conventionalMemSize;    /* in KB */
-   uLONG        extendedMemSize;        /* in KB */
+   uINT         extendedMemSize;        /* in KB */
-   uLONG        osType;                 /* Same as DPTSIG's definition */
+   uINT         osType;                 /* Same as DPTSIG's definition */
    uCHAR        osMajorVersion;
    uCHAR        osMinorVersion;         /* The OS version */
    uCHAR        osRevision;

drivers/scsi/dpti.h

@@ -84,7 +84,6 @@ static int adpt_device_reset(struct scsi_cmnd* cmd);
 #define PCI_DPT_DEVICE_ID         (0xA501)	// DPT PCI I2O Device ID
 #define PCI_DPT_RAPTOR_DEVICE_ID  (0xA511)	
 
-//#define REBOOT_NOTIFIER 1
 /* Debugging macro from Linux Device Drivers - Rubini */
 #undef PDEBUG
 #ifdef DEBUG
@@ -229,14 +228,19 @@ typedef struct _adpt_hba {
 	u32  post_fifo_size;
 	u32  reply_fifo_size;
 	u32* reply_pool;
+	dma_addr_t reply_pool_pa;
 	u32  sg_tablesize;	// Scatter/Gather List Size.       
 	u8  top_scsi_channel;
 	u8  top_scsi_id;
 	u8  top_scsi_lun;
+	u8  dma64;
 
 	i2o_status_block* status_block;
+	dma_addr_t status_block_pa;
 	i2o_hrt* hrt;
+	dma_addr_t hrt_pa;
 	i2o_lct* lct;
+	dma_addr_t lct_pa;
 	uint lct_size;
 	struct i2o_device* devices;
 	struct adpt_channel channel[MAX_CHANNEL];
@@ -249,6 +253,7 @@ typedef struct _adpt_hba {
 	void __iomem *FwDebugBLEDflag_P;// Virtual Addr Of FW Debug BLED
 	void __iomem *FwDebugBLEDvalue_P;// Virtual Addr Of FW Debug BLED
 	u32 FwDebugFlags;
+	u32 *ioctl_reply_context[4];
 } adpt_hba;
 
 struct sg_simple_element {
@@ -264,9 +269,6 @@ static void adpt_i2o_sys_shutdown(void);
 static int adpt_init(void);
 static int adpt_i2o_build_sys_table(void);
 static irqreturn_t adpt_isr(int irq, void *dev_id);
-#ifdef REBOOT_NOTIFIER
-static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p);
-#endif
 
 static void adpt_i2o_report_hba_unit(adpt_hba* pHba, struct i2o_device *d);
 static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid, 
@@ -275,7 +277,8 @@ static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid,
 static const char *adpt_i2o_get_class_name(int class);
 #endif
 static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid, 
-		  void *opblk, int oplen, void *resblk, int reslen);
+		  void *opblk, dma_addr_t opblk_pa, int oplen,
+		  void *resblk, dma_addr_t resblk_pa, int reslen);
 static int adpt_i2o_post_wait(adpt_hba* pHba, u32* msg, int len, int timeout);
 static int adpt_i2o_lct_get(adpt_hba* pHba);
 static int adpt_i2o_parse_lct(adpt_hba* pHba);
@@ -289,7 +292,7 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba);
 static s32 adpt_i2o_hrt_get(adpt_hba* pHba);
 static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice);
 static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd);
-static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht);
+static s32 adpt_scsi_host_alloc(adpt_hba* pHba,struct scsi_host_template * sht);
 static s32 adpt_hba_reset(adpt_hba* pHba);
 static s32 adpt_i2o_reset_hba(adpt_hba* pHba);
 static s32 adpt_rescan(adpt_hba* pHba);

drivers/scsi/gdth.c

@@ -465,7 +465,7 @@ int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd,
     scp->request = (struct request *)&wait;
     scp->timeout_per_command = timeout*HZ;
     scp->cmd_len = 12;
-    memcpy(scp->cmnd, cmnd, 12);
+    scp->cmnd = cmnd;
     cmndinfo.priority = IOCTL_PRI;
     cmndinfo.internal_cmd_str = gdtcmd;
     cmndinfo.internal_command = 1;

drivers/scsi/hptiop.c

@@ -763,9 +763,9 @@ static int hptiop_queuecommand(struct scsi_cmnd *scp,
 			scp,
 			host->host_no, scp->device->channel,
 			scp->device->id, scp->device->lun,
-			*((u32 *)&scp->cmnd),
+			((u32 *)scp->cmnd)[0],
-			*((u32 *)&scp->cmnd + 1),
+			((u32 *)scp->cmnd)[1],
-			*((u32 *)&scp->cmnd + 2),
+			((u32 *)scp->cmnd)[2],
 			_req->index, _req->req_virt);
 
 	scp->result = 0;

drivers/scsi/ibmvscsi/ibmvscsi.c

@@ -686,7 +686,7 @@ static void handle_cmd_rsp(struct srp_event_struct *evt_struct)
 	}
 	
 	if (cmnd) {
-		cmnd->result = rsp->status;
+		cmnd->result |= rsp->status;
 		if (((cmnd->result >> 1) & 0x1f) == CHECK_CONDITION)
 			memcpy(cmnd->sense_buffer,
 			       rsp->data,
@@ -730,6 +730,7 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
 	u16 lun = lun_from_dev(cmnd->device);
 	u8 out_fmt, in_fmt;
 
+	cmnd->result = (DID_OK << 16);
 	evt_struct = get_event_struct(&hostdata->pool);
 	if (!evt_struct)
 		return SCSI_MLQUEUE_HOST_BUSY;
@@ -738,7 +739,7 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
 	srp_cmd = &evt_struct->iu.srp.cmd;
 	memset(srp_cmd, 0x00, SRP_MAX_IU_LEN);
 	srp_cmd->opcode = SRP_CMD;
-	memcpy(srp_cmd->cdb, cmnd->cmnd, sizeof(cmnd->cmnd));
+	memcpy(srp_cmd->cdb, cmnd->cmnd, sizeof(srp_cmd->cdb));
 	srp_cmd->lun = ((u64) lun) << 48;
 
 	if (!map_data_for_srp_cmd(cmnd, evt_struct, srp_cmd, hostdata->dev)) {
@@ -1347,6 +1348,8 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 
 	del_timer(&evt_struct->timer);
 
+	if (crq->status != VIOSRP_OK && evt_struct->cmnd)
+		evt_struct->cmnd->result = DID_ERROR << 16;
 	if (evt_struct->done)
 		evt_struct->done(evt_struct);
 	else

drivers/scsi/ibmvscsi/viosrp.h

@@ -59,6 +59,15 @@ enum viosrp_crq_formats {
 	VIOSRP_INLINE_FORMAT = 0x07
 };
 
+enum viosrp_crq_status {
+	VIOSRP_OK = 0x0,
+	VIOSRP_NONRECOVERABLE_ERR = 0x1,
+	VIOSRP_VIOLATES_MAX_XFER = 0x2,
+	VIOSRP_PARTNER_PANIC = 0x3,
+	VIOSRP_DEVICE_BUSY = 0x8,
+	VIOSRP_ADAPTER_FAIL = 0x10
+};
+
 struct viosrp_crq {
 	u8 valid;		/* used by RPA */
 	u8 format;		/* SCSI vs out-of-band */

drivers/scsi/initio.c

@@ -2590,7 +2590,7 @@ static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * c
 	cblk->hastat = 0;
 	cblk->tastat = 0;
 	/* Command the command */
-	memcpy(&cblk->cdb[0], &cmnd->cmnd, cmnd->cmd_len);
+	memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len);
 
 	/* Set up tags */
 	if (cmnd->device->tagged_supported) {	/* Tag Support                  */

drivers/scsi/ipr.c

@@ -2791,7 +2791,7 @@ static ssize_t ipr_store_adapter_state(struct device *dev,
 
 static struct device_attribute ipr_ioa_state_attr = {
 	.attr = {
-		.name =		"state",
+		.name =		"online_state",
 		.mode =		S_IRUGO | S_IWUSR,
 	},
 	.show = ipr_show_adapter_state,

drivers/scsi/megaraid/megaraid_mbox.c

@@ -3168,6 +3168,23 @@ megaraid_mbox_support_random_del(adapter_t *adapter)
 	uint8_t		raw_mbox[sizeof(mbox_t)];
 	int		rval;
 
+	/*
+	 * Newer firmware on Dell CERC expect a different
+	 * random deletion handling, so disable it.
+	 */
+	if (adapter->pdev->vendor == PCI_VENDOR_ID_AMI &&
+	    adapter->pdev->device == PCI_DEVICE_ID_AMI_MEGARAID3 &&
+	    adapter->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
+	    adapter->pdev->subsystem_device == PCI_SUBSYS_ID_CERC_ATA100_4CH &&
+	    (adapter->fw_version[0] > '6' ||
+	     (adapter->fw_version[0] == '6' &&
+	      adapter->fw_version[2] > '6') ||
+	     (adapter->fw_version[0] == '6'
+	      && adapter->fw_version[2] == '6'
+	      && adapter->fw_version[3] > '1'))) {
+		con_log(CL_DLEVEL1, ("megaraid: disable random deletion\n"));
+		return 0;
+	}
 
 	mbox = (mbox_t *)raw_mbox;
 

drivers/scsi/megaraid/megaraid_mbox.h

@@ -88,6 +88,7 @@
 #define PCI_SUBSYS_ID_PERC3_QC				0x0471
 #define PCI_SUBSYS_ID_PERC3_DC				0x0493
 #define PCI_SUBSYS_ID_PERC3_SC				0x0475
+#define PCI_SUBSYS_ID_CERC_ATA100_4CH			0x0511
 
 
 #define MBOX_MAX_SCSI_CMDS	128	// number of cmds reserved for kernel

drivers/scsi/megaraid/megaraid_sas.c

@@ -10,7 +10,7 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_sas.c
- * Version	: v00.00.03.16-rc1
+ * Version	: v00.00.03.20-rc1
  *
  * Authors:
  *	(email-id : megaraidlinux@lsi.com)
@@ -2650,12 +2650,13 @@ static void megasas_shutdown_controller(struct megasas_instance *instance,
 	return;
 }
 
+#ifdef CONFIG_PM
 /**
  * megasas_suspend -	driver suspend entry point
  * @pdev:		PCI device structure
  * @state:		PCI power state to suspend routine
  */
-static int __devinit
+static int
 megasas_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct Scsi_Host *host;
@@ -2687,7 +2688,7 @@ megasas_suspend(struct pci_dev *pdev, pm_message_t state)
  * megasas_resume-      driver resume entry point
  * @pdev:               PCI device structure
  */
-static int __devinit
+static int
 megasas_resume(struct pci_dev *pdev)
 {
 	int rval;
@@ -2782,12 +2783,16 @@ megasas_resume(struct pci_dev *pdev)
 
 	return -ENODEV;
 }
+#else
+#define megasas_suspend	NULL
+#define megasas_resume	NULL
+#endif
 
 /**
  * megasas_detach_one -	PCI hot"un"plug entry point
  * @pdev:		PCI device structure
  */
-static void megasas_detach_one(struct pci_dev *pdev)
+static void __devexit megasas_detach_one(struct pci_dev *pdev)
 {
 	int i;
 	struct Scsi_Host *host;

drivers/scsi/megaraid/megaraid_sas.h

@@ -18,9 +18,9 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION				"00.00.03.16-rc1"
+#define MEGASAS_VERSION			"00.00.03.20-rc1"
-#define MEGASAS_RELDATE				"Nov. 07, 2007"
+#define MEGASAS_RELDATE			"March 10, 2008"
-#define MEGASAS_EXT_VERSION			"Thu. Nov. 07 10:09:32 PDT 2007"
+#define MEGASAS_EXT_VERSION		"Mon. March 10 11:02:31 PDT 2008"
 
 /*
  * Device IDs

drivers/scsi/qla1280.c

@@ -2858,7 +2858,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 
 	/* Load SCSI command packet. */
 	pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
-	memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
+	memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
 	/* dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
 
 	/* Set transfer direction. */
@@ -3127,7 +3127,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 
 	/* Load SCSI command packet. */
 	pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
-	memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
+	memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
 
 	/*dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
 	/* Set transfer direction. */

drivers/scsi/scsi.c

@@ -78,15 +78,6 @@ static void scsi_done(struct scsi_cmnd *cmd);
 /* Do not call reset on error if we just did a reset within 15 sec. */
 #define MIN_RESET_PERIOD (15*HZ)
 
-/*
- * Macro to determine the size of SCSI command. This macro takes vendor
- * unique commands into account. SCSI commands in groups 6 and 7 are
- * vendor unique and we will depend upon the command length being
- * supplied correctly in cmd_len.
- */
-#define CDB_SIZE(cmd)	(((((cmd)->cmnd[0] >> 5) & 7) < 6) ? \
-				COMMAND_SIZE((cmd)->cmnd[0]) : (cmd)->cmd_len)
-
 /*
  * Note - the initial logging level can be set here to log events at boot time.
  * After the system is up, you may enable logging via the /proc interface.
@@ -469,6 +460,7 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost)
 	cmd = scsi_pool_alloc_command(shost->cmd_pool, gfp_mask);
 	if (!cmd) {
 		scsi_put_host_cmd_pool(gfp_mask);
+		shost->cmd_pool = NULL;
 		return -ENOMEM;
 	}
 	list_add(&cmd->list, &shost->free_list);
@@ -481,6 +473,13 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost)
  */
 void scsi_destroy_command_freelist(struct Scsi_Host *shost)
 {
+	/*
+	 * If cmd_pool is NULL the free list was not initialized, so
+	 * do not attempt to release resources.
+	 */
+	if (!shost->cmd_pool)
+		return;
+
 	while (!list_empty(&shost->free_list)) {
 		struct scsi_cmnd *cmd;
 
@@ -701,9 +700,11 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
 	 * Before we queue this command, check if the command
 	 * length exceeds what the host adapter can handle.
 	 */
-	if (CDB_SIZE(cmd) > cmd->device->host->max_cmd_len) {
+	if (cmd->cmd_len > cmd->device->host->max_cmd_len) {
 		SCSI_LOG_MLQUEUE(3,
-				printk("queuecommand : command too long.\n"));
+			printk("queuecommand : command too long. "
+			       "cdb_size=%d host->max_cmd_len=%d\n",
+			       cmd->cmd_len, cmd->device->host->max_cmd_len));
 		cmd->result = (DID_ABORT << 16);
 
 		scsi_done(cmd);

drivers/scsi/scsi_error.c

@@ -626,7 +626,7 @@ static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
  * @scmd:       SCSI command structure to hijack
  * @ses:        structure to save restore information
  * @cmnd:       CDB to send. Can be NULL if no new cmnd is needed
- * @cmnd_size:  size in bytes of @cmnd
+ * @cmnd_size:  size in bytes of @cmnd (must be <= BLK_MAX_CDB)
  * @sense_bytes: size of sense data to copy. or 0 (if != 0 @cmnd is ignored)
  *
  * This function is used to save a scsi command information before re-execution
@@ -648,12 +648,14 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
 	 * command.
 	 */
 	ses->cmd_len = scmd->cmd_len;
-	memcpy(ses->cmnd, scmd->cmnd, sizeof(scmd->cmnd));
+	ses->cmnd = scmd->cmnd;
 	ses->data_direction = scmd->sc_data_direction;
 	ses->sdb = scmd->sdb;
 	ses->next_rq = scmd->request->next_rq;
 	ses->result = scmd->result;
 
+	scmd->cmnd = ses->eh_cmnd;
+	memset(scmd->cmnd, 0, BLK_MAX_CDB);
 	memset(&scmd->sdb, 0, sizeof(scmd->sdb));
 	scmd->request->next_rq = NULL;
 
@@ -665,14 +667,13 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
 		scmd->sdb.table.sgl = &ses->sense_sgl;
 		scmd->sc_data_direction = DMA_FROM_DEVICE;
 		scmd->sdb.table.nents = 1;
-		memset(scmd->cmnd, 0, sizeof(scmd->cmnd));
 		scmd->cmnd[0] = REQUEST_SENSE;
 		scmd->cmnd[4] = scmd->sdb.length;
 		scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
 	} else {
 		scmd->sc_data_direction = DMA_NONE;
 		if (cmnd) {
-			memset(scmd->cmnd, 0, sizeof(scmd->cmnd));
+			BUG_ON(cmnd_size > BLK_MAX_CDB);
 			memcpy(scmd->cmnd, cmnd, cmnd_size);
 			scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
 		}
@@ -705,7 +706,7 @@ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
 	 * Restore original data
 	 */
 	scmd->cmd_len = ses->cmd_len;
-	memcpy(scmd->cmnd, ses->cmnd, sizeof(scmd->cmnd));
+	scmd->cmnd = ses->cmnd;
 	scmd->sc_data_direction = ses->data_direction;
 	scmd->sdb = ses->sdb;
 	scmd->request->next_rq = ses->next_rq;
@@ -1775,8 +1776,8 @@ scsi_reset_provider(struct scsi_device *dev, int flag)
 	scmd->request = &req;
 	memset(&scmd->eh_timeout, 0, sizeof(scmd->eh_timeout));
 
-	memset(&scmd->cmnd, '\0', sizeof(scmd->cmnd));
+	scmd->cmnd = req.cmd;
-    
+
 	scmd->scsi_done		= scsi_reset_provider_done_command;
 	memset(&scmd->sdb, 0, sizeof(scmd->sdb));
 

drivers/scsi/scsi_lib.c

@@ -445,7 +445,7 @@ static void scsi_init_cmd_errh(struct scsi_cmnd *cmd)
 	scsi_set_resid(cmd, 0);
 	memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
 	if (cmd->cmd_len == 0)
-		cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]);
+		cmd->cmd_len = scsi_command_size(cmd->cmnd);
 }
 
 void scsi_device_unbusy(struct scsi_device *sdev)
@@ -1094,6 +1094,8 @@ static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev,
 	cmd->tag = req->tag;
 	cmd->request = req;
 
+	cmd->cmnd = req->cmd;
+
 	return cmd;
 }
 
@@ -1131,8 +1133,6 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
 		req->buffer = NULL;
 	}
 
-	BUILD_BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd));
-	memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd));
 	cmd->cmd_len = req->cmd_len;
 	if (!req->data_len)
 		cmd->sc_data_direction = DMA_NONE;
@@ -1169,6 +1169,7 @@ int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
 	if (unlikely(!cmd))
 		return BLKPREP_DEFER;
 
+	memset(cmd->cmnd, 0, BLK_MAX_CDB);
 	return scsi_init_io(cmd, GFP_ATOMIC);
 }
 EXPORT_SYMBOL(scsi_setup_fs_cmnd);

drivers/scsi/scsi_tgt_lib.c

@@ -107,6 +107,8 @@ struct scsi_cmnd *scsi_host_get_command(struct Scsi_Host *shost,
 	cmd->jiffies_at_alloc = jiffies;
 	cmd->request = rq;
 
+	cmd->cmnd = rq->cmd;
+
 	rq->special = cmd;
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	rq->cmd_flags |= REQ_TYPE_BLOCK_PC;

drivers/scsi/u14-34f.c

@@ -744,7 +744,8 @@ static int wait_on_busy(unsigned long iobase, unsigned int loop) {
 static int board_inquiry(unsigned int j) {
    struct mscp *cpp;
    dma_addr_t id_dma_addr;
-   unsigned int time, limit = 0;
+   unsigned int limit = 0;
+   unsigned long time;
 
    id_dma_addr = pci_map_single(HD(j)->pdev, HD(j)->board_id,
                     sizeof(HD(j)->board_id), PCI_DMA_BIDIRECTIONAL);
@@ -1392,7 +1393,8 @@ static int u14_34f_eh_abort(struct scsi_cmnd *SCarg) {
 }
 
 static int u14_34f_eh_host_reset(struct scsi_cmnd *SCarg) {
-   unsigned int i, j, time, k, c, limit = 0;
+   unsigned int i, j, k, c, limit = 0;
+   unsigned long time;
    int arg_done = FALSE;
    struct scsi_cmnd *SCpnt;
 

drivers/usb/storage/cypress_atacb.c

@@ -46,7 +46,7 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 	}
 
 	memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd));
-	memset(srb->cmnd, 0, sizeof(srb->cmnd));
+	memset(srb->cmnd, 0, MAX_COMMAND_SIZE);
 
 	/* check if we support the command */
 	if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */

drivers/usb/storage/isd200.c

@@ -292,6 +292,7 @@ struct isd200_info {
 
 	/* maximum number of LUNs supported */
 	unsigned char MaxLUNs;
+	unsigned char cmnd[BLK_MAX_CDB];
 	struct scsi_cmnd srb;
 	struct scatterlist sg;
 };
@@ -450,6 +451,7 @@ static int isd200_action( struct us_data *us, int action,
 
 	memset(&ata, 0, sizeof(ata));
 	memset(&srb_dev, 0, sizeof(srb_dev));
+	srb->cmnd = info->cmnd;
 	srb->device = &srb_dev;
 	++srb->serial_number;
 

include/scsi/scsi.h

@@ -29,13 +29,6 @@
 #define SCSI_MAX_SG_CHAIN_SEGMENTS	SCSI_MAX_SG_SEGMENTS
 #endif
 
-/*
- *	SCSI command lengths
- */
-
-extern const unsigned char scsi_command_size[8];
-#define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7]
-
 /*
  * Special value for scanning to specify scanning or rescanning of all
  * possible channels, (target) ids, or luns on a given shost.
@@ -109,6 +102,7 @@ extern const unsigned char scsi_command_size[8];
 #define MODE_SENSE_10         0x5a
 #define PERSISTENT_RESERVE_IN 0x5e
 #define PERSISTENT_RESERVE_OUT 0x5f
+#define VARIABLE_LENGTH_CMD   0x7f
 #define REPORT_LUNS           0xa0
 #define MAINTENANCE_IN        0xa3
 #define MOVE_MEDIUM           0xa5
@@ -135,6 +129,38 @@ extern const unsigned char scsi_command_size[8];
 #define	ATA_16		      0x85	/* 16-byte pass-thru */
 #define	ATA_12		      0xa1	/* 12-byte pass-thru */
 
+/*
+ *	SCSI command lengths
+ */
+
+#define SCSI_MAX_VARLEN_CDB_SIZE 260
+
+/* defined in T10 SCSI Primary Commands-2 (SPC2) */
+struct scsi_varlen_cdb_hdr {
+	u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
+	u8 control;
+	u8 misc[5];
+	u8 additional_cdb_length;         /* total cdb length - 8 */
+	__be16 service_action;
+	/* service specific data follows */
+};
+
+static inline unsigned
+scsi_varlen_cdb_length(const void *hdr)
+{
+	return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
+}
+
+extern const unsigned char scsi_command_size_tbl[8];
+#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
+
+static inline unsigned
+scsi_command_size(const unsigned char *cmnd)
+{
+	return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+		scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
+}
+
 /*
  *  SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
  *  T10/1561-D Revision 4 Draft dated 7th November 2002.

include/scsi/scsi_cmnd.h

@@ -7,10 +7,28 @@
 #include <linux/types.h>
 #include <linux/timer.h>
 #include <linux/scatterlist.h>
+#include <linux/blkdev.h>
 
 struct Scsi_Host;
 struct scsi_device;
 
+/*
+ * MAX_COMMAND_SIZE is:
+ * The longest fixed-length SCSI CDB as per the SCSI standard.
+ * fixed-length means: commands that their size can be determined
+ * by their opcode and the CDB does not carry a length specifier, (unlike
+ * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
+ * true and the SCSI standard also defines extended commands and
+ * vendor specific commands that can be bigger than 16 bytes. The kernel
+ * will support these using the same infrastructure used for VARLEN CDB's.
+ * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
+ * supports without specifying a cmd_len by ULD's
+ */
+#define MAX_COMMAND_SIZE 16
+#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
+# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
+#endif
+
 struct scsi_data_buffer {
 	struct sg_table table;
 	unsigned length;
@@ -60,12 +78,11 @@ struct scsi_cmnd {
 	int allowed;
 	int timeout_per_command;
 
-	unsigned char cmd_len;
+	unsigned short cmd_len;
 	enum dma_data_direction sc_data_direction;
 
 	/* These elements define the operation we are about to perform */
-#define MAX_COMMAND_SIZE	16
+	unsigned char *cmnd;
-	unsigned char cmnd[MAX_COMMAND_SIZE];
 
 	struct timer_list eh_timeout;	/* Used to time out the command. */
 

include/scsi/scsi_eh.h

@@ -75,11 +75,11 @@ struct scsi_eh_save {
 	int result;
 	enum dma_data_direction data_direction;
 	unsigned char cmd_len;
-	unsigned char cmnd[MAX_COMMAND_SIZE];
+	unsigned char *cmnd;
 	struct scsi_data_buffer sdb;
 	struct request *next_rq;
-
 	/* new command support */
+	unsigned char eh_cmnd[BLK_MAX_CDB];
 	struct scatterlist sense_sgl;
 };
 

include/scsi/scsi_host.h

@@ -573,13 +573,11 @@ struct Scsi_Host {
 	/*
 	 * The maximum length of SCSI commands that this host can accept.
 	 * Probably 12 for most host adapters, but could be 16 for others.
+	 * or 260 if the driver supports variable length cdbs.
 	 * For drivers that don't set this field, a value of 12 is
-	 * assumed.  I am leaving this as a number rather than a bit
+	 * assumed.
-	 * because you never know what subsequent SCSI standards might do
-	 * (i.e. could there be a 20 byte or a 24-byte command a few years
-	 * down the road?).  
 	 */
-	unsigned char max_cmd_len;
+	unsigned short max_cmd_len;
 
 	int this_id;
 	int can_queue;