From 69cd39e94669e2994277a29249b6ef93b088ddbb Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Fri, 18 Apr 2008 13:57:20 -0700 Subject: [PATCH 01/19] [SCSI] megaraid_mbox: fix Dell CERC firmware problem Newer Dell CERC firmware (>= 6.62) implement a random deletion handling compatible with the legacy megaraid driver. The legacy handling shifted the target ID by 0x80 only for I/O commands (READ/WRITE/etc), whereas megaraid_mbox shifts the target ID always if random deletion is supported. The resulted in megaraid_mbox sending an INQUIRY to the wrong channel, and not finding any devices, obviously. So we disable the random deletion support if the offending firmware is found. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=6695 Signed-off-by: Hannes Reinecke Signed-off-by: Andrew Morton Acked-by: "Yang, Bo" Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_mbox.c | 17 +++++++++++++++++ drivers/scsi/megaraid/megaraid_mbox.h | 1 + 2 files changed, 18 insertions(+) diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 820f91fb63ba..70a0f11f48b2 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -3168,6 +3168,23 @@ megaraid_mbox_support_random_del(adapter_t *adapter) uint8_t raw_mbox[sizeof(mbox_t)]; int rval; + /* + * Newer firmware on Dell CERC expect a different + * random deletion handling, so disable it. + */ + if (adapter->pdev->vendor == PCI_VENDOR_ID_AMI && + adapter->pdev->device == PCI_DEVICE_ID_AMI_MEGARAID3 && + adapter->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL && + adapter->pdev->subsystem_device == PCI_SUBSYS_ID_CERC_ATA100_4CH && + (adapter->fw_version[0] > '6' || + (adapter->fw_version[0] == '6' && + adapter->fw_version[2] > '6') || + (adapter->fw_version[0] == '6' + && adapter->fw_version[2] == '6' + && adapter->fw_version[3] > '1'))) { + con_log(CL_DLEVEL1, ("megaraid: disable random deletion\n")); + return 0; + } mbox = (mbox_t *)raw_mbox; diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h index 626459d1e902..c1d86d961a92 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.h +++ b/drivers/scsi/megaraid/megaraid_mbox.h @@ -88,6 +88,7 @@ #define PCI_SUBSYS_ID_PERC3_QC 0x0471 #define PCI_SUBSYS_ID_PERC3_DC 0x0493 #define PCI_SUBSYS_ID_PERC3_SC 0x0475 +#define PCI_SUBSYS_ID_CERC_ATA100_4CH 0x0511 #define MBOX_MAX_SCSI_CMDS 128 // number of cmds reserved for kernel From 49dd09613cf8ae3b697c341c501b7526b462cfeb Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 28 Apr 2008 17:36:20 -0500 Subject: [PATCH 02/19] [SCSI] ipr: Rename ipr's state scsi host attribute to prevent collisions Due to recent device model changes it now no longer tolerates name collisions. This causes a problem for ipr whose "state" attribute collides with an identically named one in the SCSI mid-layer. Rename the ipr driver attribute to be more specific. Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index de5ae6a65029..999e91ea7451 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -2791,7 +2791,7 @@ static ssize_t ipr_store_adapter_state(struct device *dev, static struct device_attribute ipr_ioa_state_attr = { .attr = { - .name = "state", + .name = "online_state", .mode = S_IRUGO | S_IWUSR, }, .show = ipr_show_adapter_state, From 61d7416a286e840d905c18b1e6b0977c036c8656 Mon Sep 17 00:00:00 2001 From: "Alan D. Brunelle" Date: Tue, 29 Apr 2008 16:12:51 -0400 Subject: [PATCH 03/19] [SCSI] bug fix for free list handling commit: commit 542bd1377a963070bc4a03ff7d2690ddf3920596 Author: James Bottomley Date: Mon Apr 21 10:57:20 2008 -0500 [SCSI] fix SLUB WARN_ON Fixed another problem in free list handling by moving list allocation from scsi_host_alloc() to scsi_add_host(). Unfortunately it introduced a new failure mode in that hosts can pass straight from alloc to put without going through add, leaving the free list uninitialised. Fix by checking shost->cmd_pool on the release path to see if it got initialised. Signed-off-by: Alan D. Brunelle Signed-off-by: James Bottomley --- drivers/scsi/scsi.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 12d69d7c8577..749c9c7fc2e1 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -469,6 +469,7 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) cmd = scsi_pool_alloc_command(shost->cmd_pool, gfp_mask); if (!cmd) { scsi_put_host_cmd_pool(gfp_mask); + shost->cmd_pool = NULL; return -ENOMEM; } list_add(&cmd->list, &shost->free_list); @@ -481,6 +482,13 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) */ void scsi_destroy_command_freelist(struct Scsi_Host *shost) { + /* + * If cmd_pool is NULL the free list was not initialized, so + * do not attempt to release resources. + */ + if (!shost->cmd_pool) + return; + while (!list_empty(&shost->free_list)) { struct scsi_cmnd *cmd; From c3a3b55ae80a0d595445064159c69f8e80911e85 Mon Sep 17 00:00:00 2001 From: Brian King Date: Fri, 25 Apr 2008 16:58:29 -0500 Subject: [PATCH 04/19] [SCSI] ibmvscsi: Handle non SCSI error status Adds support to the ibmvscsi driver to handle non SCSI error status. This is needed to support some new VIOS enhancements. Signed-off-by: Brian King Signed-off-by: Santiago Leon Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvscsi.c | 5 ++++- drivers/scsi/ibmvscsi/viosrp.h | 9 +++++++++ 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 4a922c57125e..9c77015b7a80 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -686,7 +686,7 @@ static void handle_cmd_rsp(struct srp_event_struct *evt_struct) } if (cmnd) { - cmnd->result = rsp->status; + cmnd->result |= rsp->status; if (((cmnd->result >> 1) & 0x1f) == CHECK_CONDITION) memcpy(cmnd->sense_buffer, rsp->data, @@ -730,6 +730,7 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd, u16 lun = lun_from_dev(cmnd->device); u8 out_fmt, in_fmt; + cmnd->result = (DID_OK << 16); evt_struct = get_event_struct(&hostdata->pool); if (!evt_struct) return SCSI_MLQUEUE_HOST_BUSY; @@ -1347,6 +1348,8 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq, del_timer(&evt_struct->timer); + if (crq->status != VIOSRP_OK && evt_struct->cmnd) + evt_struct->cmnd->result = DID_ERROR << 16; if (evt_struct->done) evt_struct->done(evt_struct); else diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h index 90f1a61283ad..4c4aadb3e405 100644 --- a/drivers/scsi/ibmvscsi/viosrp.h +++ b/drivers/scsi/ibmvscsi/viosrp.h @@ -59,6 +59,15 @@ enum viosrp_crq_formats { VIOSRP_INLINE_FORMAT = 0x07 }; +enum viosrp_crq_status { + VIOSRP_OK = 0x0, + VIOSRP_NONRECOVERABLE_ERR = 0x1, + VIOSRP_VIOLATES_MAX_XFER = 0x2, + VIOSRP_PARTNER_PANIC = 0x3, + VIOSRP_DEVICE_BUSY = 0x8, + VIOSRP_ADAPTER_FAIL = 0x10 +}; + struct viosrp_crq { u8 valid; /* used by RPA */ u8 format; /* SCSI vs out-of-band */ From 127ce971adeb4514bc4edc5bf45f79beb0c94aa5 Mon Sep 17 00:00:00 2001 From: bo yang Date: Tue, 29 Apr 2008 03:55:33 -0400 Subject: [PATCH 05/19] [SCSI] megaraid_sas; Update the Version and Changelog Update the Version and Changelog for megaraid_sas Driver Signed-off-by: Bo Yang Signed-off-by: James Bottomley --- Documentation/scsi/ChangeLog.megaraid_sas | 22 ++++++++++++++++++++++ drivers/scsi/megaraid/megaraid_sas.c | 2 +- drivers/scsi/megaraid/megaraid_sas.h | 6 +++--- 3 files changed, 26 insertions(+), 4 deletions(-) diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 91c81db0ba71..716fcc1cafb5 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,3 +1,25 @@ +1 Release Date : Mon. March 10 11:02:31 PDT 2008 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.20-RC1 +3 Older Version : 00.00.03.16 + +1. Rollback the sense info implementation + Sense buffer ptr data type in the ioctl path is reverted back + to u32 * as in previous versions of driver. + +2. Fixed the driver frame count. + When Driver sent wrong frame count to firmware. As this + particular command is sent to drive, FW is seeing continuous + chip resets and so the command will timeout. + +3. Add the new controller(1078DE) support to the driver + and Increase the max_wait to 60 from 10 in the controller + operational status. With this max_wait increase, driver will + make sure the FW will finish the pending cmd for KDUMP case. + 1 Release Date : Thur. Nov. 07 16:30:43 PST 2007 - (emaild-id:megaraidlinux@lsi.com) Sumant Patro diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index b937e9cddb23..f09654a7d1fa 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_sas.c - * Version : v00.00.03.16-rc1 + * Version : v00.00.03.20-rc1 * * Authors: * (email-id : megaraidlinux@lsi.com) diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 3a997eb457bf..b0c41e671702 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -18,9 +18,9 @@ /* * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "00.00.03.16-rc1" -#define MEGASAS_RELDATE "Nov. 07, 2007" -#define MEGASAS_EXT_VERSION "Thu. Nov. 07 10:09:32 PDT 2007" +#define MEGASAS_VERSION "00.00.03.20-rc1" +#define MEGASAS_RELDATE "March 10, 2008" +#define MEGASAS_EXT_VERSION "Mon. March 10 11:02:31 PDT 2008" /* * Device IDs From 0462590efe9a562dd2aa976ae2dc9cd2e6f5a0c6 Mon Sep 17 00:00:00 2001 From: Mark Salyzyn Date: Wed, 23 Apr 2008 08:16:06 -0400 Subject: [PATCH 06/19] [SCSI] aacraid: Fix down_interruptible() to check the return value correctly On Apr 21, 2008, at 8:42 PM, Yinghai Lu wrote: > bisected to: > > commit e6990c6448ca9359b6d4ad027c0a6efbf4379e64 > Author: Mark Salyzyn > Date: Mon Apr 14 14:20:16 2008 -0400 > > [SCSI] aacraid: Fix down_interruptible() to check the return value The return value for down_interruptible was incorrectly checked! updated patch enclosed. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/commsup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index ef67816a6fe5..e7a4c6f202d1 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -515,7 +515,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, } udelay(5); } - } else if (down_interruptible(&fibptr->event_wait) == 0) { + } else if (down_interruptible(&fibptr->event_wait)) { fibptr->done = 2; up(&fibptr->event_wait); } From 9f5de6b105bfa45911d46566df0b36720b648c42 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 30 Apr 2008 13:16:21 +0900 Subject: [PATCH 07/19] [SCSI] bsg: add large command support This enables bsg to handle the request length larger than BLK_MAX_CDB (mainly for the variable length CDB format). Signed-off-by: FUJITA Tomonori Acked-by: Jens Axboe Signed-off-by: James Bottomley --- block/bsg.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/block/bsg.c b/block/bsg.c index 23ea4fd1a66d..d8b889d2e411 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -174,7 +174,11 @@ static int bsg_io_schedule(struct bsg_device *bd) static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq, struct sg_io_v4 *hdr, int has_write_perm) { - memset(rq->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */ + if (hdr->request_len > BLK_MAX_CDB) { + rq->cmd = kzalloc(hdr->request_len, GFP_KERNEL); + if (!rq->cmd) + return -ENOMEM; + } if (copy_from_user(rq->cmd, (void *)(unsigned long)hdr->request, hdr->request_len)) @@ -211,8 +215,6 @@ bsg_validate_sgv4_hdr(struct request_queue *q, struct sg_io_v4 *hdr, int *rw) if (hdr->guard != 'Q') return -EINVAL; - if (hdr->request_len > BLK_MAX_CDB) - return -EINVAL; if (hdr->dout_xfer_len > (q->max_sectors << 9) || hdr->din_xfer_len > (q->max_sectors << 9)) return -EIO; @@ -302,6 +304,8 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr) } return rq; out: + if (rq->cmd != rq->__cmd) + kfree(rq->cmd); blk_put_request(rq); if (next_rq) { blk_rq_unmap_user(next_rq->bio); @@ -455,6 +459,8 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr, ret = rq->errors; blk_rq_unmap_user(bio); + if (rq->cmd != rq->__cmd) + kfree(rq->cmd); blk_put_request(rq); return ret; From 64a87b244b9297667ca80264aab849a36f494884 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Wed, 30 Apr 2008 11:19:47 +0300 Subject: [PATCH 08/19] [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer - struct scsi_cmnd had a 16 bytes command buffer of its own. This is an unnecessary duplication and copy of request's cmd. It is probably left overs from the time that scsi_cmnd could function without a request attached. So clean that up. - Once above is done, few places, apart from scsi-ml, needed adjustments due to changing the data type of scsi_cmnd->cmnd. - Lots of drivers still use MAX_COMMAND_SIZE. So I have left that #define but equate it to BLK_MAX_CDB. The way I see it and is reflected in the patch below is. MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB as per the SCSI standard and is not related to the implementation. BLK_MAX_CDB. - The allocated space at the request level - I have audit all ISA drivers and made sure none use ->cmnd in a DMA Operation. Same audit was done by Andi Kleen. (*)fixed-length here means commands that their size can be determined by their opcode and the CDB does not carry a length specifier, (unlike the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly true and the SCSI standard also defines extended commands and vendor specific commands that can be bigger than 16 bytes. The kernel will support these using the same infrastructure used for VARLEN CDB's. So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml supports without specifying a cmd_len by ULD's Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/firewire/fw-sbp2.c | 2 +- drivers/s390/scsi/zfcp_dbf.c | 2 +- drivers/s390/scsi/zfcp_fsf.c | 2 +- drivers/scsi/53c700.c | 6 +++--- drivers/scsi/a100u2w.c | 2 +- drivers/scsi/gdth.c | 2 +- drivers/scsi/hptiop.c | 6 +++--- drivers/scsi/ibmvscsi/ibmvscsi.c | 2 +- drivers/scsi/initio.c | 2 +- drivers/scsi/qla1280.c | 4 ++-- drivers/scsi/scsi_error.c | 15 ++++++++------- drivers/scsi/scsi_lib.c | 5 +++-- drivers/scsi/scsi_tgt_lib.c | 2 ++ drivers/usb/storage/cypress_atacb.c | 2 +- drivers/usb/storage/isd200.c | 2 ++ include/scsi/scsi_cmnd.h | 21 +++++++++++++++++++-- include/scsi/scsi_eh.h | 4 ++-- 17 files changed, 52 insertions(+), 29 deletions(-) diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 2a999373863e..dda82f37cab3 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -1487,7 +1487,7 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) if (scsi_sg_count(cmd) && sbp2_map_scatterlist(orb, device, lu) < 0) goto out; - memcpy(orb->request.command_block, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd)); + memcpy(orb->request.command_block, cmd->cmnd, cmd->cmd_len); orb->base.callback = complete_command_orb; orb->base.request_bus = diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c index 37b85c67b11d..c8bad675dbd1 100644 --- a/drivers/s390/scsi/zfcp_dbf.c +++ b/drivers/s390/scsi/zfcp_dbf.c @@ -1055,7 +1055,7 @@ static void zfcp_scsi_dbf_event(const char *tag, const char *tag2, int level, rec->scsi_result = scsi_cmnd->result; rec->scsi_cmnd = (unsigned long)scsi_cmnd; rec->scsi_serial = scsi_cmnd->serial_number; - memcpy(rec->scsi_opcode, &scsi_cmnd->cmnd, + memcpy(rec->scsi_opcode, scsi_cmnd->cmnd, min((int)scsi_cmnd->cmd_len, ZFCP_DBF_SCSI_OPCODE)); rec->scsi_retries = scsi_cmnd->retries; diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 9af2330f07a2..b2ea4ea051f5 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -4014,7 +4014,7 @@ zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req) ZFCP_LOG_TRACE("scpnt->result =0x%x, command was:\n", scpnt->result); ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, - (void *) &scpnt->cmnd, scpnt->cmd_len); + scpnt->cmnd, scpnt->cmd_len); ZFCP_LOG_TRACE("%i bytes sense data provided by FCP\n", fcp_rsp_iu->fcp_sns_len); diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c index f4c4fe90240a..f5a9addb7050 100644 --- a/drivers/scsi/53c700.c +++ b/drivers/scsi/53c700.c @@ -599,7 +599,7 @@ NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata, (struct NCR_700_command_slot *)SCp->host_scribble; dma_unmap_single(hostdata->dev, slot->pCmd, - sizeof(SCp->cmnd), DMA_TO_DEVICE); + MAX_COMMAND_SIZE, DMA_TO_DEVICE); if (slot->flags == NCR_700_FLAG_AUTOSENSE) { char *cmnd = NCR_700_get_sense_cmnd(SCp->device); #ifdef NCR_700_DEBUG @@ -1004,7 +1004,7 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp, * here */ NCR_700_unmap(hostdata, SCp, slot); dma_unmap_single(hostdata->dev, slot->pCmd, - sizeof(SCp->cmnd), + MAX_COMMAND_SIZE, DMA_TO_DEVICE); cmnd[0] = REQUEST_SENSE; @@ -1901,7 +1901,7 @@ NCR_700_queuecommand(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *)) } slot->resume_offset = 0; slot->pCmd = dma_map_single(hostdata->dev, SCp->cmnd, - sizeof(SCp->cmnd), DMA_TO_DEVICE); + MAX_COMMAND_SIZE, DMA_TO_DEVICE); NCR_700_start_command(SCp); return 0; } diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index 792b2e807bf3..ced3eebe252c 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -895,7 +895,7 @@ static void inia100_build_scb(struct orc_host * host, struct orc_scb * scb, stru } else { scb->tag_msg = 0; /* No tag support */ } - memcpy(&scb->cdb[0], &cmd->cmnd, scb->cdb_len); + memcpy(scb->cdb, cmd->cmnd, scb->cdb_len); } /** diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index c6d6e7c6559a..8e2e964af668 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -465,7 +465,7 @@ int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd, scp->request = (struct request *)&wait; scp->timeout_per_command = timeout*HZ; scp->cmd_len = 12; - memcpy(scp->cmnd, cmnd, 12); + scp->cmnd = cmnd; cmndinfo.priority = IOCTL_PRI; cmndinfo.internal_cmd_str = gdtcmd; cmndinfo.internal_command = 1; diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index 5b7be1e9841c..aaa48e0c8ed0 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -763,9 +763,9 @@ static int hptiop_queuecommand(struct scsi_cmnd *scp, scp, host->host_no, scp->device->channel, scp->device->id, scp->device->lun, - *((u32 *)&scp->cmnd), - *((u32 *)&scp->cmnd + 1), - *((u32 *)&scp->cmnd + 2), + ((u32 *)scp->cmnd)[0], + ((u32 *)scp->cmnd)[1], + ((u32 *)scp->cmnd)[2], _req->index, _req->req_virt); scp->result = 0; diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 9c77015b7a80..ccfd8aca3765 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -739,7 +739,7 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd, srp_cmd = &evt_struct->iu.srp.cmd; memset(srp_cmd, 0x00, SRP_MAX_IU_LEN); srp_cmd->opcode = SRP_CMD; - memcpy(srp_cmd->cdb, cmnd->cmnd, sizeof(cmnd->cmnd)); + memcpy(srp_cmd->cdb, cmnd->cmnd, sizeof(srp_cmd->cdb)); srp_cmd->lun = ((u64) lun) << 48; if (!map_data_for_srp_cmd(cmnd, evt_struct, srp_cmd, hostdata->dev)) { diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c index dbae3fdb8506..e3f739776bad 100644 --- a/drivers/scsi/initio.c +++ b/drivers/scsi/initio.c @@ -2590,7 +2590,7 @@ static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * c cblk->hastat = 0; cblk->tastat = 0; /* Command the command */ - memcpy(&cblk->cdb[0], &cmnd->cmnd, cmnd->cmd_len); + memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len); /* Set up tags */ if (cmnd->device->tagged_supported) { /* Tag Support */ diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 09ab3eac1c1a..fa060932d2b4 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -2858,7 +2858,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) /* Load SCSI command packet. */ pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd)); - memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd)); + memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd)); /* dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */ /* Set transfer direction. */ @@ -3127,7 +3127,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) /* Load SCSI command packet. */ pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd)); - memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd)); + memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd)); /*dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */ /* Set transfer direction. */ diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 221f31e36d26..334244c73955 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -626,7 +626,7 @@ static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd) * @scmd: SCSI command structure to hijack * @ses: structure to save restore information * @cmnd: CDB to send. Can be NULL if no new cmnd is needed - * @cmnd_size: size in bytes of @cmnd + * @cmnd_size: size in bytes of @cmnd (must be <= BLK_MAX_CDB) * @sense_bytes: size of sense data to copy. or 0 (if != 0 @cmnd is ignored) * * This function is used to save a scsi command information before re-execution @@ -648,12 +648,14 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses, * command. */ ses->cmd_len = scmd->cmd_len; - memcpy(ses->cmnd, scmd->cmnd, sizeof(scmd->cmnd)); + ses->cmnd = scmd->cmnd; ses->data_direction = scmd->sc_data_direction; ses->sdb = scmd->sdb; ses->next_rq = scmd->request->next_rq; ses->result = scmd->result; + scmd->cmnd = ses->eh_cmnd; + memset(scmd->cmnd, 0, BLK_MAX_CDB); memset(&scmd->sdb, 0, sizeof(scmd->sdb)); scmd->request->next_rq = NULL; @@ -665,14 +667,13 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses, scmd->sdb.table.sgl = &ses->sense_sgl; scmd->sc_data_direction = DMA_FROM_DEVICE; scmd->sdb.table.nents = 1; - memset(scmd->cmnd, 0, sizeof(scmd->cmnd)); scmd->cmnd[0] = REQUEST_SENSE; scmd->cmnd[4] = scmd->sdb.length; scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); } else { scmd->sc_data_direction = DMA_NONE; if (cmnd) { - memset(scmd->cmnd, 0, sizeof(scmd->cmnd)); + BUG_ON(cmnd_size > BLK_MAX_CDB); memcpy(scmd->cmnd, cmnd, cmnd_size); scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); } @@ -705,7 +706,7 @@ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses) * Restore original data */ scmd->cmd_len = ses->cmd_len; - memcpy(scmd->cmnd, ses->cmnd, sizeof(scmd->cmnd)); + scmd->cmnd = ses->cmnd; scmd->sc_data_direction = ses->data_direction; scmd->sdb = ses->sdb; scmd->request->next_rq = ses->next_rq; @@ -1774,8 +1775,8 @@ scsi_reset_provider(struct scsi_device *dev, int flag) scmd->request = &req; memset(&scmd->eh_timeout, 0, sizeof(scmd->eh_timeout)); - memset(&scmd->cmnd, '\0', sizeof(scmd->cmnd)); - + scmd->cmnd = req.cmd; + scmd->scsi_done = scsi_reset_provider_done_command; memset(&scmd->sdb, 0, sizeof(scmd->sdb)); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 67f412bb4974..325270b520e1 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1090,6 +1090,8 @@ static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev, cmd->tag = req->tag; cmd->request = req; + cmd->cmnd = req->cmd; + return cmd; } @@ -1127,8 +1129,6 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req) req->buffer = NULL; } - BUILD_BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd)); - memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd)); cmd->cmd_len = req->cmd_len; if (!req->data_len) cmd->sc_data_direction = DMA_NONE; @@ -1165,6 +1165,7 @@ int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req) if (unlikely(!cmd)) return BLKPREP_DEFER; + memset(cmd->cmnd, 0, BLK_MAX_CDB); return scsi_init_io(cmd, GFP_ATOMIC); } EXPORT_SYMBOL(scsi_setup_fs_cmnd); diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c index ee8496aa0336..257e097c39af 100644 --- a/drivers/scsi/scsi_tgt_lib.c +++ b/drivers/scsi/scsi_tgt_lib.c @@ -107,6 +107,8 @@ struct scsi_cmnd *scsi_host_get_command(struct Scsi_Host *shost, cmd->jiffies_at_alloc = jiffies; cmd->request = rq; + cmd->cmnd = rq->cmd; + rq->special = cmd; rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_flags |= REQ_TYPE_BLOCK_PC; diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index d88824b3511c..898e67d30e56 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -46,7 +46,7 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) } memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd)); - memset(srb->cmnd, 0, sizeof(srb->cmnd)); + memset(srb->cmnd, 0, MAX_COMMAND_SIZE); /* check if we support the command */ if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */ diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 971d13dd5e65..3addcd8f827b 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -292,6 +292,7 @@ struct isd200_info { /* maximum number of LUNs supported */ unsigned char MaxLUNs; + unsigned char cmnd[BLK_MAX_CDB]; struct scsi_cmnd srb; struct scatterlist sg; }; @@ -450,6 +451,7 @@ static int isd200_action( struct us_data *us, int action, memset(&ata, 0, sizeof(ata)); memset(&srb_dev, 0, sizeof(srb_dev)); + srb->cmnd = info->cmnd; srb->device = &srb_dev; ++srb->serial_number; diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 8d20e60a94b7..7ed883c8e48a 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -7,10 +7,28 @@ #include #include #include +#include struct Scsi_Host; struct scsi_device; +/* + * MAX_COMMAND_SIZE is: + * The longest fixed-length SCSI CDB as per the SCSI standard. + * fixed-length means: commands that their size can be determined + * by their opcode and the CDB does not carry a length specifier, (unlike + * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly + * true and the SCSI standard also defines extended commands and + * vendor specific commands that can be bigger than 16 bytes. The kernel + * will support these using the same infrastructure used for VARLEN CDB's. + * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml + * supports without specifying a cmd_len by ULD's + */ +#define MAX_COMMAND_SIZE 16 +#if (MAX_COMMAND_SIZE > BLK_MAX_CDB) +# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB +#endif + struct scsi_data_buffer { struct sg_table table; unsigned length; @@ -64,8 +82,7 @@ struct scsi_cmnd { enum dma_data_direction sc_data_direction; /* These elements define the operation we are about to perform */ -#define MAX_COMMAND_SIZE 16 - unsigned char cmnd[MAX_COMMAND_SIZE]; + unsigned char *cmnd; struct timer_list eh_timeout; /* Used to time out the command. */ diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h index d3a133b4a072..2a9add21267d 100644 --- a/include/scsi/scsi_eh.h +++ b/include/scsi/scsi_eh.h @@ -75,11 +75,11 @@ struct scsi_eh_save { int result; enum dma_data_direction data_direction; unsigned char cmd_len; - unsigned char cmnd[MAX_COMMAND_SIZE]; + unsigned char *cmnd; struct scsi_data_buffer sdb; struct request *next_rq; - /* new command support */ + unsigned char eh_cmnd[BLK_MAX_CDB]; struct scatterlist sense_sgl; }; From db4742dd8f0aa9125b74f9b2516336a75f3d9106 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Wed, 30 Apr 2008 11:27:26 +0300 Subject: [PATCH 09/19] [SCSI] add support for variable length extended commands Add support for variable-length, extended, and vendor specific CDBs to scsi-ml. It is now possible for initiators and ULD's to issue these types of commands. LLDs need not change much. All they need is to raise the .max_cmd_len to the longest command they support (see iscsi patch). - clean-up some code paths that did not expect commands to be larger than 16, and change cmd_len members' type to short as char is not enough. Signed-off-by: Boaz Harrosh Signed-off-by: Benny Halevy Signed-off-by: James Bottomley --- block/scsi_ioctl.c | 5 ++--- drivers/scsi/constants.c | 10 +++------- drivers/scsi/scsi.c | 15 ++++----------- drivers/scsi/scsi_lib.c | 2 +- include/scsi/scsi.h | 40 +++++++++++++++++++++++++++++++++------- include/scsi/scsi_cmnd.h | 2 +- include/scsi/scsi_host.h | 8 +++----- 7 files changed, 47 insertions(+), 35 deletions(-) diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index a2c3a936ebf9..aaf07e413ffd 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -33,13 +33,12 @@ #include /* Command group 3 is reserved and should never be used. */ -const unsigned char scsi_command_size[8] = +const unsigned char scsi_command_size_tbl[8] = { 6, 10, 10, 12, 16, 12, 10, 10 }; - -EXPORT_SYMBOL(scsi_command_size); +EXPORT_SYMBOL(scsi_command_size_tbl); #include diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index 403a7f2d8f9b..9785d7384199 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -28,7 +28,6 @@ #define SERVICE_ACTION_OUT_12 0xa9 #define SERVICE_ACTION_IN_16 0x9e #define SERVICE_ACTION_OUT_16 0x9f -#define VARIABLE_LENGTH_CMD 0x7f @@ -210,7 +209,7 @@ static void print_opcode_name(unsigned char * cdbp, int cdb_len) cdb0 = cdbp[0]; switch(cdb0) { case VARIABLE_LENGTH_CMD: - len = cdbp[7] + 8; + len = scsi_varlen_cdb_length(cdbp); if (len < 10) { printk("short variable length command, " "len=%d ext_len=%d", len, cdb_len); @@ -300,7 +299,7 @@ static void print_opcode_name(unsigned char * cdbp, int cdb_len) cdb0 = cdbp[0]; switch(cdb0) { case VARIABLE_LENGTH_CMD: - len = cdbp[7] + 8; + len = scsi_varlen_cdb_length(cdbp); if (len < 10) { printk("short opcode=0x%x command, len=%d " "ext_len=%d", cdb0, len, cdb_len); @@ -335,10 +334,7 @@ void __scsi_print_command(unsigned char *cdb) int k, len; print_opcode_name(cdb, 0); - if (VARIABLE_LENGTH_CMD == cdb[0]) - len = cdb[7] + 8; - else - len = COMMAND_SIZE(cdb[0]); + len = scsi_command_size(cdb); /* print out all bytes in cdb */ for (k = 0; k < len; ++k) printk(" %02x", cdb[k]); diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 749c9c7fc2e1..110e776d1a07 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -78,15 +78,6 @@ static void scsi_done(struct scsi_cmnd *cmd); /* Do not call reset on error if we just did a reset within 15 sec. */ #define MIN_RESET_PERIOD (15*HZ) -/* - * Macro to determine the size of SCSI command. This macro takes vendor - * unique commands into account. SCSI commands in groups 6 and 7 are - * vendor unique and we will depend upon the command length being - * supplied correctly in cmd_len. - */ -#define CDB_SIZE(cmd) (((((cmd)->cmnd[0] >> 5) & 7) < 6) ? \ - COMMAND_SIZE((cmd)->cmnd[0]) : (cmd)->cmd_len) - /* * Note - the initial logging level can be set here to log events at boot time. * After the system is up, you may enable logging via the /proc interface. @@ -709,9 +700,11 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) * Before we queue this command, check if the command * length exceeds what the host adapter can handle. */ - if (CDB_SIZE(cmd) > cmd->device->host->max_cmd_len) { + if (cmd->cmd_len > cmd->device->host->max_cmd_len) { SCSI_LOG_MLQUEUE(3, - printk("queuecommand : command too long.\n")); + printk("queuecommand : command too long. " + "cdb_size=%d host->max_cmd_len=%d\n", + cmd->cmd_len, cmd->device->host->max_cmd_len)); cmd->result = (DID_ABORT << 16); scsi_done(cmd); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 325270b520e1..ba7e8ad76d04 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -445,7 +445,7 @@ static void scsi_init_cmd_errh(struct scsi_cmnd *cmd) scsi_set_resid(cmd, 0); memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); if (cmd->cmd_len == 0) - cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]); + cmd->cmd_len = scsi_command_size(cmd->cmnd); } void scsi_device_unbusy(struct scsi_device *sdev) diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 1f74bcd603fe..32742c4563de 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -29,13 +29,6 @@ #define SCSI_MAX_SG_CHAIN_SEGMENTS SCSI_MAX_SG_SEGMENTS #endif -/* - * SCSI command lengths - */ - -extern const unsigned char scsi_command_size[8]; -#define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7] - /* * Special value for scanning to specify scanning or rescanning of all * possible channels, (target) ids, or luns on a given shost. @@ -109,6 +102,7 @@ extern const unsigned char scsi_command_size[8]; #define MODE_SENSE_10 0x5a #define PERSISTENT_RESERVE_IN 0x5e #define PERSISTENT_RESERVE_OUT 0x5f +#define VARIABLE_LENGTH_CMD 0x7f #define REPORT_LUNS 0xa0 #define MAINTENANCE_IN 0xa3 #define MOVE_MEDIUM 0xa5 @@ -135,6 +129,38 @@ extern const unsigned char scsi_command_size[8]; #define ATA_16 0x85 /* 16-byte pass-thru */ #define ATA_12 0xa1 /* 12-byte pass-thru */ +/* + * SCSI command lengths + */ + +#define SCSI_MAX_VARLEN_CDB_SIZE 260 + +/* defined in T10 SCSI Primary Commands-2 (SPC2) */ +struct scsi_varlen_cdb_hdr { + u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */ + u8 control; + u8 misc[5]; + u8 additional_cdb_length; /* total cdb length - 8 */ + __be16 service_action; + /* service specific data follows */ +}; + +static inline unsigned +scsi_varlen_cdb_length(const void *hdr) +{ + return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8; +} + +extern const unsigned char scsi_command_size_tbl[8]; +#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7] + +static inline unsigned +scsi_command_size(const unsigned char *cmnd) +{ + return (cmnd[0] == VARIABLE_LENGTH_CMD) ? + scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]); +} + /* * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft * T10/1561-D Revision 4 Draft dated 7th November 2002. diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 7ed883c8e48a..3e46dfae8194 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -78,7 +78,7 @@ struct scsi_cmnd { int allowed; int timeout_per_command; - unsigned char cmd_len; + unsigned short cmd_len; enum dma_data_direction sc_data_direction; /* These elements define the operation we are about to perform */ diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index d967d6dc7a28..1834fdfe82a7 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -573,13 +573,11 @@ struct Scsi_Host { /* * The maximum length of SCSI commands that this host can accept. * Probably 12 for most host adapters, but could be 16 for others. + * or 260 if the driver supports variable length cdbs. * For drivers that don't set this field, a value of 12 is - * assumed. I am leaving this as a number rather than a bit - * because you never know what subsequent SCSI standards might do - * (i.e. could there be a 20 byte or a 24-byte command a few years - * down the road?). + * assumed. */ - unsigned char max_cmd_len; + unsigned short max_cmd_len; int this_id; int can_queue; From e2efe7aa24dc7b430d2ea109fa117bd3c60ae8e6 Mon Sep 17 00:00:00 2001 From: Mark Salyzyn Date: Wed, 30 Apr 2008 15:28:32 -0400 Subject: [PATCH 10/19] [SCSI] aacraid: Fix warning about macro side-effects On some compile environments, warnings are produced regarding the usage of aac_logical_to_phys macro. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aacraid.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 113ca9c8934c..a990e5b088cc 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -34,8 +34,8 @@ #define CONTAINER_TO_ID(cont) (cont) #define CONTAINER_TO_LUN(cont) (0) -#define aac_phys_to_logical(x) (x+1) -#define aac_logical_to_phys(x) (x?x-1:0) +#define aac_phys_to_logical(x) ((x)+1) +#define aac_logical_to_phys(x) ((x)?(x)-1:0) /* #define AAC_DETAILED_STATUS_INFO */ From a4576b5da671563187ac388e36e1d077bd20e43a Mon Sep 17 00:00:00 2001 From: Mark Salyzyn Date: Wed, 30 Apr 2008 15:47:35 -0400 Subject: [PATCH 11/19] [SCSI] aacraid: Fix jbod operations scan issues As JBOD devices (really just Simple Single Drive Volumes exported to the SCSI channel) are managed, they fail to update correctly when the driver triggers a SCSI scan. In addition, the ability to change multiple arrays or JBODs at the same time was resulting in dropped scans, set up a mechanism to issue a list of single target scans on a single configuration change notification from the Firmware. Performed some additional sundry cosmetic code style cleanups. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/commsup.c | 32 +++++++++++++++++++++++++------- drivers/scsi/aacraid/linit.c | 16 +++++++++------- 2 files changed, 34 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index e7a4c6f202d1..289304aab690 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -906,15 +906,22 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) case AifEnAddJBOD: case AifEnDeleteJBOD: container = le32_to_cpu(((__le32 *)aifcmd->data)[1]); - if ((container >> 28)) + if ((container >> 28)) { + container = (u32)-1; break; + } channel = (container >> 24) & 0xF; - if (channel >= dev->maximum_num_channels) + if (channel >= dev->maximum_num_channels) { + container = (u32)-1; break; + } id = container & 0xFFFF; - if (id >= dev->maximum_num_physicals) + if (id >= dev->maximum_num_physicals) { + container = (u32)-1; break; + } lun = (container >> 16) & 0xFF; + container = (u32)-1; channel = aac_phys_to_logical(channel); device_config_needed = (((__le32 *)aifcmd->data)[0] == @@ -933,13 +940,18 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) case EM_DRIVE_REMOVAL: container = le32_to_cpu( ((__le32 *)aifcmd->data)[2]); - if ((container >> 28)) + if ((container >> 28)) { + container = (u32)-1; break; + } channel = (container >> 24) & 0xF; - if (channel >= dev->maximum_num_channels) + if (channel >= dev->maximum_num_channels) { + container = (u32)-1; break; + } id = container & 0xFFFF; lun = (container >> 16) & 0xFF; + container = (u32)-1; if (id >= dev->maximum_num_physicals) { /* legacy dev_t ? */ if ((0x2000 <= id) || lun || channel || @@ -1025,9 +1037,10 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) break; } + container = 0; +retry_next: if (device_config_needed == NOTHING) - for (container = 0; container < dev->maximum_num_containers; - ++container) { + for (; container < dev->maximum_num_containers; ++container) { if ((dev->fsa_dev[container].config_waiting_on == 0) && (dev->fsa_dev[container].config_needed != NOTHING) && time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT)) { @@ -1110,6 +1123,11 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) } if (device_config_needed == ADD) scsi_add_device(dev->scsi_host_ptr, channel, id, lun); + if (channel == CONTAINER_CHANNEL) { + container++; + device_config_needed = NOTHING; + goto retry_next; + } } static int _aac_reset_adapter(struct aac_dev *aac, int forced) diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index c109f63f8279..c444527ae2fa 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -401,6 +401,8 @@ static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev, static int aac_slave_configure(struct scsi_device *sdev) { struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata; + if (aac->jbod && (sdev->type == TYPE_DISK)) + sdev->removable = 1; if ((sdev->type == TYPE_DISK) && (sdev_channel(sdev) != CONTAINER_CHANNEL) && (!aac->jbod || sdev->inq_periph_qual) && @@ -1106,7 +1108,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, aac->pdev = pdev; aac->name = aac_driver_template.name; aac->id = shost->unique_id; - aac->cardtype = index; + aac->cardtype = index; INIT_LIST_HEAD(&aac->entry); aac->fibs = kmalloc(sizeof(struct fib) * (shost->can_queue + AAC_NUM_MGT_FIB), GFP_KERNEL); @@ -1146,19 +1148,19 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, goto out_deinit; /* - * Lets override negotiations and drop the maximum SG limit to 34 - */ + * Lets override negotiations and drop the maximum SG limit to 34 + */ if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) && (shost->sg_tablesize > 34)) { shost->sg_tablesize = 34; shost->max_sectors = (shost->sg_tablesize * 8) + 112; - } + } - if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) && + if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) && (shost->sg_tablesize > 17)) { shost->sg_tablesize = 17; shost->max_sectors = (shost->sg_tablesize * 8) + 112; - } + } error = pci_set_dma_max_seg_size(pdev, (aac->adapter_info.options & AAC_OPT_NEW_COMM) ? @@ -1174,7 +1176,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, else aac->printf_enabled = 0; - /* + /* * max channel will be the physical channels plus 1 virtual channel * all containers are on the virtual channel 0 (CONTAINER_CHANNEL) * physical channels are address by their actual physical number+1 From 655d722cf7812078306f975a3afe88b96a1306b8 Mon Sep 17 00:00:00 2001 From: Mark Salyzyn Date: Wed, 30 Apr 2008 16:03:42 -0400 Subject: [PATCH 12/19] [SCSI] aacraid: Add Power Management support For firmware that supports the feature(s), add the ability to start or stop an array using the associated SCSI commands, to automatically manage the spin-up of an array on new I/O reporting back the appropriate check conditions and actions in cooperation with the normal timeout mechanisms and enable the blackout period management in the Firmware associated with the background spin-down of the arrays when the Firmware times out and deems the arrays as idle. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 133 ++++++++++++++++++++++++++++++-- drivers/scsi/aacraid/aacraid.h | 24 +++++- drivers/scsi/aacraid/comminit.c | 2 + drivers/scsi/aacraid/linit.c | 6 ++ 4 files changed, 154 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 460d4024c46c..aa4e77c25273 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -498,6 +498,11 @@ static void _aac_probe_container2(void * context, struct fib * fibptr) (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) && (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) { fsa_dev_ptr->valid = 1; + /* sense_key holds the current state of the spin-up */ + if (dresp->mnt[0].state & cpu_to_le32(FSCS_NOT_READY)) + fsa_dev_ptr->sense_data.sense_key = NOT_READY; + else if (fsa_dev_ptr->sense_data.sense_key == NOT_READY) + fsa_dev_ptr->sense_data.sense_key = NO_SENSE; fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol); fsa_dev_ptr->size = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) + @@ -1509,20 +1514,35 @@ static void io_callback(void *context, struct fib * fibptr) scsi_dma_unmap(scsicmd); readreply = (struct aac_read_reply *)fib_data(fibptr); - if (le32_to_cpu(readreply->status) == ST_OK) - scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; - else { + switch (le32_to_cpu(readreply->status)) { + case ST_OK: + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | + SAM_STAT_GOOD; + dev->fsa_dev[cid].sense_data.sense_key = NO_SENSE; + break; + case ST_NOT_READY: + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | + SAM_STAT_CHECK_CONDITION; + set_sense(&dev->fsa_dev[cid].sense_data, NOT_READY, + SENCODE_BECOMING_READY, ASENCODE_BECOMING_READY, 0, 0); + memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, + min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), + SCSI_SENSE_BUFFERSIZE)); + break; + default: #ifdef AAC_DETAILED_STATUS_INFO printk(KERN_WARNING "io_callback: io failed, status = %d\n", le32_to_cpu(readreply->status)); #endif - scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | + SAM_STAT_CHECK_CONDITION; set_sense(&dev->fsa_dev[cid].sense_data, HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE, ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0); memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), SCSI_SENSE_BUFFERSIZE)); + break; } aac_fib_complete(fibptr); aac_fib_free(fibptr); @@ -1863,6 +1883,84 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd) return SCSI_MLQUEUE_HOST_BUSY; } +static void aac_start_stop_callback(void *context, struct fib *fibptr) +{ + struct scsi_cmnd *scsicmd = context; + + if (!aac_valid_context(scsicmd, fibptr)) + return; + + BUG_ON(fibptr == NULL); + + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; + + aac_fib_complete(fibptr); + aac_fib_free(fibptr); + scsicmd->scsi_done(scsicmd); +} + +static int aac_start_stop(struct scsi_cmnd *scsicmd) +{ + int status; + struct fib *cmd_fibcontext; + struct aac_power_management *pmcmd; + struct scsi_device *sdev = scsicmd->device; + struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata; + + if (!(aac->supplement_adapter_info.SupportedOptions2 & + AAC_OPTION_POWER_MANAGEMENT)) { + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | + SAM_STAT_GOOD; + scsicmd->scsi_done(scsicmd); + return 0; + } + + if (aac->in_reset) + return SCSI_MLQUEUE_HOST_BUSY; + + /* + * Allocate and initialize a Fib + */ + cmd_fibcontext = aac_fib_alloc(aac); + if (!cmd_fibcontext) + return SCSI_MLQUEUE_HOST_BUSY; + + aac_fib_init(cmd_fibcontext); + + pmcmd = fib_data(cmd_fibcontext); + pmcmd->command = cpu_to_le32(VM_ContainerConfig); + pmcmd->type = cpu_to_le32(CT_POWER_MANAGEMENT); + /* Eject bit ignored, not relevant */ + pmcmd->sub = (scsicmd->cmnd[4] & 1) ? + cpu_to_le32(CT_PM_START_UNIT) : cpu_to_le32(CT_PM_STOP_UNIT); + pmcmd->cid = cpu_to_le32(sdev_id(sdev)); + pmcmd->parm = (scsicmd->cmnd[1] & 1) ? + cpu_to_le32(CT_PM_UNIT_IMMEDIATE) : 0; + + /* + * Now send the Fib to the adapter + */ + status = aac_fib_send(ContainerCommand, + cmd_fibcontext, + sizeof(struct aac_power_management), + FsaNormal, + 0, 1, + (fib_callback)aac_start_stop_callback, + (void *)scsicmd); + + /* + * Check that the command queued to the controller + */ + if (status == -EINPROGRESS) { + scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; + return 0; + } + + aac_fib_complete(cmd_fibcontext); + aac_fib_free(cmd_fibcontext); + return SCSI_MLQUEUE_HOST_BUSY; +} + /** * aac_scsi_cmd() - Process SCSI command * @scsicmd: SCSI command block @@ -1899,7 +1997,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) * If the target container doesn't exist, it may have * been newly created */ - if ((fsa_dev_ptr[cid].valid & 1) == 0) { + if (((fsa_dev_ptr[cid].valid & 1) == 0) || + (fsa_dev_ptr[cid].sense_data.sense_key == + NOT_READY)) { switch (scsicmd->cmnd[0]) { case SERVICE_ACTION_IN: if (!(dev->raw_io_interface) || @@ -2091,8 +2191,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) scsi_sg_copy_from_buffer(scsicmd, cp, sizeof(cp)); /* Do not cache partition table for arrays */ scsicmd->device->removable = 1; - - scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | + SAM_STAT_GOOD; scsicmd->scsi_done(scsicmd); return 0; @@ -2187,15 +2287,32 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) * These commands are all No-Ops */ case TEST_UNIT_READY: + if (fsa_dev_ptr[cid].sense_data.sense_key == NOT_READY) { + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | + SAM_STAT_CHECK_CONDITION; + set_sense(&dev->fsa_dev[cid].sense_data, + NOT_READY, SENCODE_BECOMING_READY, + ASENCODE_BECOMING_READY, 0, 0); + memcpy(scsicmd->sense_buffer, + &dev->fsa_dev[cid].sense_data, + min_t(size_t, + sizeof(dev->fsa_dev[cid].sense_data), + SCSI_SENSE_BUFFERSIZE)); + scsicmd->scsi_done(scsicmd); + return 0; + } + /* FALLTHRU */ case RESERVE: case RELEASE: case REZERO_UNIT: case REASSIGN_BLOCKS: case SEEK_10: - case START_STOP: scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; scsicmd->scsi_done(scsicmd); return 0; + + case START_STOP: + return aac_start_stop(scsicmd); } switch (scsicmd->cmnd[0]) diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index a990e5b088cc..73916adb8f80 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -12,7 +12,7 @@ *----------------------------------------------------------------------------*/ #ifndef AAC_DRIVER_BUILD -# define AAC_DRIVER_BUILD 2455 +# define AAC_DRIVER_BUILD 2456 # define AAC_DRIVER_BRANCH "-ms" #endif #define MAXIMUM_NUM_CONTAINERS 32 @@ -424,6 +424,8 @@ struct aac_init */ __le32 InitFlags; /* flags for supported features */ #define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001 +#define INITFLAGS_DRIVER_USES_UTC_TIME 0x00000010 +#define INITFLAGS_DRIVER_SUPPORTS_PM 0x00000020 __le32 MaxIoCommands; /* max outstanding commands */ __le32 MaxIoSize; /* largest I/O command */ __le32 MaxFibSize; /* largest FIB to adapter */ @@ -867,8 +869,10 @@ struct aac_supplement_adapter_info }; #define AAC_FEATURE_FALCON cpu_to_le32(0x00000010) #define AAC_FEATURE_JBOD cpu_to_le32(0x08000000) -#define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001) -#define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002) +/* SupportedOptions2 */ +#define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001) +#define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002) +#define AAC_OPTION_POWER_MANAGEMENT cpu_to_le32(0x00000004) #define AAC_SIS_VERSION_V3 3 #define AAC_SIS_SLOT_UNKNOWN 0xFF @@ -1148,6 +1152,7 @@ struct aac_dev #define ST_DQUOT 69 #define ST_STALE 70 #define ST_REMOTE 71 +#define ST_NOT_READY 72 #define ST_BADHANDLE 10001 #define ST_NOT_SYNC 10002 #define ST_BAD_COOKIE 10003 @@ -1269,6 +1274,18 @@ struct aac_synchronize_reply { u8 data[16]; }; +#define CT_POWER_MANAGEMENT 245 +#define CT_PM_START_UNIT 2 +#define CT_PM_STOP_UNIT 3 +#define CT_PM_UNIT_IMMEDIATE 1 +struct aac_power_management { + __le32 command; /* VM_ContainerConfig */ + __le32 type; /* CT_POWER_MANAGEMENT */ + __le32 sub; /* CT_PM_* */ + __le32 cid; + __le32 parm; /* CT_PM_sub_* */ +}; + #define CT_PAUSE_IO 65 #define CT_RELEASE_IO 66 struct aac_pause { @@ -1536,6 +1553,7 @@ struct aac_mntent { #define FSCS_NOTCLEAN 0x0001 /* fsck is necessary before mounting */ #define FSCS_READONLY 0x0002 /* possible result of broken mirror */ #define FSCS_HIDDEN 0x0004 /* should be ignored - set during a clear */ +#define FSCS_NOT_READY 0x0008 /* Array spinning up to fulfil request */ struct aac_query_mount { __le32 command; diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 294a802450be..cbac06355107 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -97,6 +97,8 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co init->InitFlags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED); dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n")); } + init->InitFlags |= cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME | + INITFLAGS_DRIVER_SUPPORTS_PM); init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9); init->MaxFibSize = cpu_to_le32(dev->max_fib_size); diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index c444527ae2fa..1f7c83607f84 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -811,6 +811,12 @@ static ssize_t aac_show_flags(struct device *cdev, "SAI_READ_CAPACITY_16\n"); if (dev->jbod) len += snprintf(buf + len, PAGE_SIZE - len, "SUPPORTED_JBOD\n"); + if (dev->supplement_adapter_info.SupportedOptions2 & + AAC_OPTION_POWER_MANAGEMENT) + len += snprintf(buf + len, PAGE_SIZE - len, + "SUPPORTED_POWER_MANAGEMENT\n"); + if (dev->msi) + len += snprintf(buf + len, PAGE_SIZE - len, "PCI_HAS_MSI\n"); return len; } From 33139b21013aba815924b421159fab35e5175483 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 1 May 2008 17:56:02 +0200 Subject: [PATCH 13/19] [SCSI] megaraid_sas: fix suspend/resume sections megaraid_sas suspend and resume are inappropriatelly placed in __devinit section. Remove those placements and make the stuff dependent on CONFIG_PM. While at it, mark remove function as __devexit. Signed-off-by: Jiri Slaby Acked-by: "Yang, Bo" Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index f09654a7d1fa..7d84c8bbcf3f 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -2650,12 +2650,13 @@ static void megasas_shutdown_controller(struct megasas_instance *instance, return; } +#ifdef CONFIG_PM /** * megasas_suspend - driver suspend entry point * @pdev: PCI device structure * @state: PCI power state to suspend routine */ -static int __devinit +static int megasas_suspend(struct pci_dev *pdev, pm_message_t state) { struct Scsi_Host *host; @@ -2687,7 +2688,7 @@ megasas_suspend(struct pci_dev *pdev, pm_message_t state) * megasas_resume- driver resume entry point * @pdev: PCI device structure */ -static int __devinit +static int megasas_resume(struct pci_dev *pdev) { int rval; @@ -2782,12 +2783,16 @@ megasas_resume(struct pci_dev *pdev) return -ENODEV; } +#else +#define megasas_suspend NULL +#define megasas_resume NULL +#endif /** * megasas_detach_one - PCI hot"un"plug entry point * @pdev: PCI device structure */ -static void megasas_detach_one(struct pci_dev *pdev) +static void __devexit megasas_detach_one(struct pci_dev *pdev) { int i; struct Scsi_Host *host; From c864cb145dc2218cfad9fe53d323b54b48dbab6c Mon Sep 17 00:00:00 2001 From: Miquel van Smoorenburg Date: Fri, 2 May 2008 01:05:33 +0200 Subject: [PATCH 14/19] [SCSI] dpt_i2o: use standard __init / __exit code Update dpt_i2o.c to use the standard __init / __exit code instead of the legacy '#include "scsi_module.c"' code. This is needed in preparation of 64-bit support. scsi_module.c calls scsi_add_host() with the device pointer set to NULL, and that crashes code like arch/x64/kernel/pci-gart_64.c::need_iommu(). The reboot_notifier code is deleted because it wasn't compiled in ever anyway, and it would be useless to duplicate it in the new code. Signed-off-by: Miquel van Smoorenburg Acked-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/dpt_i2o.c | 102 ++++++++++++++++++++--------------------- drivers/scsi/dpti.h | 6 +-- 2 files changed, 51 insertions(+), 57 deletions(-) diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index c9dd8392aab2..30c741a12a62 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -121,15 +121,6 @@ static const struct file_operations adpt_fops = { .release = adpt_close }; -#ifdef REBOOT_NOTIFIER -static struct notifier_block adpt_reboot_notifier = -{ - adpt_reboot_event, - NULL, - 0 -}; -#endif - /* Structures and definitions for synchronous message posting. * See adpt_i2o_post_wait() for description * */ @@ -178,8 +169,6 @@ static int adpt_detect(struct scsi_host_template* sht) struct pci_dev *pDev = NULL; adpt_hba* pHba; - adpt_init(); - PINFO("Detecting Adaptec I2O RAID controllers...\n"); /* search for all Adatpec I2O RAID cards */ @@ -248,7 +237,7 @@ static int adpt_detect(struct scsi_host_template* sht) } for (pHba = hba_chain; pHba; pHba = pHba->next) { - if( adpt_scsi_register(pHba,sht) < 0){ + if (adpt_scsi_host_alloc(pHba, sht) < 0){ adpt_i2o_delete_hba(pHba); continue; } @@ -861,27 +850,6 @@ static void adpt_i2o_sys_shutdown(void) printk(KERN_INFO "Adaptec I2O controllers down.\n"); } -/* - * reboot/shutdown notification. - * - * - Quiesce each IOP in the system - * - */ - -#ifdef REBOOT_NOTIFIER -static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p) -{ - - if(code != SYS_RESTART && code != SYS_HALT && code != SYS_POWER_OFF) - return NOTIFY_DONE; - - adpt_i2o_sys_shutdown(); - - return NOTIFY_DONE; -} -#endif - - static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev) { @@ -1080,18 +1048,6 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba) } } - -static int adpt_init(void) -{ - printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n"); -#ifdef REBOOT_NOTIFIER - register_reboot_notifier(&adpt_reboot_notifier); -#endif - - return 0; -} - - static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun) { struct adpt_device* d; @@ -2177,13 +2133,13 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d } -static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht) +static s32 adpt_scsi_host_alloc(adpt_hba* pHba, struct scsi_host_template *sht) { - struct Scsi_Host *host = NULL; + struct Scsi_Host *host; - host = scsi_register(sht, sizeof(adpt_hba*)); + host = scsi_host_alloc(sht, sizeof(adpt_hba*)); if (host == NULL) { - printk ("%s: scsi_register returned NULL\n",pHba->name); + printk("%s: scsi_host_alloc returned NULL\n", pHba->name); return -1; } host->hostdata[0] = (unsigned long)pHba; @@ -3323,11 +3279,10 @@ static static void adpt_delay(int millisec) #endif static struct scsi_host_template driver_template = { + .module = THIS_MODULE, .name = "dpt_i2o", .proc_name = "dpt_i2o", .proc_info = adpt_proc_info, - .detect = adpt_detect, - .release = adpt_release, .info = adpt_info, .queuecommand = adpt_queue, .eh_abort_handler = adpt_abort, @@ -3341,5 +3296,48 @@ static struct scsi_host_template driver_template = { .cmd_per_lun = 1, .use_clustering = ENABLE_CLUSTERING, }; -#include "scsi_module.c" + +static int __init adpt_init(void) +{ + int error; + adpt_hba *pHba, *next; + + printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n"); + + error = adpt_detect(&driver_template); + if (error < 0) + return error; + if (hba_chain == NULL) + return -ENODEV; + + for (pHba = hba_chain; pHba; pHba = pHba->next) { + error = scsi_add_host(pHba->host, &pHba->pDev->dev); + if (error) + goto fail; + scsi_scan_host(pHba->host); + } + return 0; +fail: + for (pHba = hba_chain; pHba; pHba = next) { + next = pHba->next; + scsi_remove_host(pHba->host); + } + return error; +} + +static void __exit adpt_exit(void) +{ + adpt_hba *pHba, *next; + + for (pHba = hba_chain; pHba; pHba = pHba->next) + scsi_remove_host(pHba->host); + for (pHba = hba_chain; pHba; pHba = next) { + next = pHba->next; + adpt_release(pHba->host); + } +} + +module_init(adpt_init); +module_exit(adpt_exit); + MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h index fd79068c5869..acc692915b4c 100644 --- a/drivers/scsi/dpti.h +++ b/drivers/scsi/dpti.h @@ -84,7 +84,6 @@ static int adpt_device_reset(struct scsi_cmnd* cmd); #define PCI_DPT_DEVICE_ID (0xA501) // DPT PCI I2O Device ID #define PCI_DPT_RAPTOR_DEVICE_ID (0xA511) -//#define REBOOT_NOTIFIER 1 /* Debugging macro from Linux Device Drivers - Rubini */ #undef PDEBUG #ifdef DEBUG @@ -264,9 +263,6 @@ static void adpt_i2o_sys_shutdown(void); static int adpt_init(void); static int adpt_i2o_build_sys_table(void); static irqreturn_t adpt_isr(int irq, void *dev_id); -#ifdef REBOOT_NOTIFIER -static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p); -#endif static void adpt_i2o_report_hba_unit(adpt_hba* pHba, struct i2o_device *d); static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid, @@ -289,7 +285,7 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba); static s32 adpt_i2o_hrt_get(adpt_hba* pHba); static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice); static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd); -static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht); +static s32 adpt_scsi_host_alloc(adpt_hba* pHba,struct scsi_host_template * sht); static s32 adpt_hba_reset(adpt_hba* pHba); static s32 adpt_i2o_reset_hba(adpt_hba* pHba); static s32 adpt_rescan(adpt_hba* pHba); From 67af2b060e027c84b8e48d77e00b2369d997c0d4 Mon Sep 17 00:00:00 2001 From: Miquel van Smoorenburg Date: Fri, 2 May 2008 01:06:39 +0200 Subject: [PATCH 15/19] [SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt to dma_alloc_coherent Remove virt_to_bus/bus_to_virt code from dpt_i2o, and use dma_alloc_coherent() / dma_free_coherent(). This is in preparation of 64-bit support, dma_alloc_coherent() can allocate memory in the lower 32 bits of physical memory which is needed because the HBA only supports message blocks under 4GB This code is based in part on the unofficial adaptec 64-bit dpt_i2o driver update that I got from Mark Salyzyn at Adaptec. Signed-off-by: Miquel van Smoorenburg Acked-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/dpt_i2o.c | 236 ++++++++++++++++++++++++++++------------- drivers/scsi/dpti.h | 7 +- 2 files changed, 169 insertions(+), 74 deletions(-) diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 30c741a12a62..7b1a084ec94e 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -29,11 +29,6 @@ /*#define DEBUG 1 */ /*#define UARTDELAY 1 */ -/* On the real kernel ADDR32 should always be zero for 2.4. GFP_HIGH allocates - high pages. Keep the macro around because of the broken unmerged ia64 tree */ - -#define ADDR32 (0) - #include MODULE_AUTHOR("Deanna Bonds, with _lots_ of help from Mark Salyzyn"); @@ -108,9 +103,10 @@ static dpt_sig_S DPTI_sig = { static DEFINE_MUTEX(adpt_configuration_lock); -static struct i2o_sys_tbl *sys_tbl = NULL; -static int sys_tbl_ind = 0; -static int sys_tbl_len = 0; +static struct i2o_sys_tbl *sys_tbl; +static dma_addr_t sys_tbl_pa; +static int sys_tbl_ind; +static int sys_tbl_len; static adpt_hba* hba_chain = NULL; static int hba_count = 0; @@ -142,6 +138,16 @@ static DEFINE_SPINLOCK(adpt_post_wait_lock); *============================================================================ */ +static inline u32 dma_high(dma_addr_t addr) +{ + return upper_32_bits(addr); +} + +static inline u32 dma_low(dma_addr_t addr) +{ + return (u32)addr; +} + static u8 adpt_read_blink_led(adpt_hba* host) { if(host->FwDebugBLEDflag_P != 0) { @@ -279,11 +285,12 @@ static void adpt_inquiry(adpt_hba* pHba) u32 len; u32 reqlen; u8* buf; + dma_addr_t addr; u8 scb[16]; s32 rcode; memset(msg, 0, sizeof(msg)); - buf = kmalloc(80,GFP_KERNEL|ADDR32); + buf = dma_alloc_coherent(&pHba->pDev->dev, 80, &addr, GFP_KERNEL); if(!buf){ printk(KERN_ERR"%s: Could not allocate buffer\n",pHba->name); return; @@ -328,7 +335,7 @@ static void adpt_inquiry(adpt_hba* pHba) /* Now fill in the SGList and command */ *lenptr = len; *mptr++ = 0xD0000000|direction|len; - *mptr++ = virt_to_bus(buf); + *mptr++ = addr; // Send it on it's way rcode = adpt_i2o_post_wait(pHba, msg, reqlen<<2, 120); @@ -336,7 +343,7 @@ static void adpt_inquiry(adpt_hba* pHba) sprintf(pHba->detail, "Adaptec I2O RAID"); printk(KERN_INFO "%s: Inquiry Error (%d)\n",pHba->name,rcode); if (rcode != -ETIME && rcode != -EINTR) - kfree(buf); + dma_free_coherent(&pHba->pDev->dev, 80, buf, addr); } else { memset(pHba->detail, 0, sizeof(pHba->detail)); memcpy(&(pHba->detail), "Vendor: Adaptec ", 16); @@ -345,7 +352,7 @@ static void adpt_inquiry(adpt_hba* pHba) memcpy(&(pHba->detail[40]), " FW: ", 4); memcpy(&(pHba->detail[44]), (u8*) &buf[32], 4); pHba->detail[48] = '\0'; /* precautionary */ - kfree(buf); + dma_free_coherent(&pHba->pDev->dev, 80, buf, addr); } adpt_i2o_status_get(pHba); return ; @@ -621,7 +628,6 @@ static int adpt_proc_info(struct Scsi_Host *host, char *buffer, char **start, of return len; } - /*=========================================================================== * Error Handling routines *=========================================================================== @@ -877,6 +883,9 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) return -EINVAL; + /* adapter only supports message blocks below 4GB */ + pci_set_consistent_dma_mask(pDev, DMA_32BIT_MASK); + base_addr0_phys = pci_resource_start(pDev,0); hba_map0_area_size = pci_resource_len(pDev,0); @@ -1021,10 +1030,24 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba) if(pHba->msg_addr_virt != pHba->base_addr_virt){ iounmap(pHba->msg_addr_virt); } - kfree(pHba->hrt); - kfree(pHba->lct); - kfree(pHba->status_block); - kfree(pHba->reply_pool); + if(pHba->hrt) { + dma_free_coherent(&pHba->pDev->dev, + pHba->hrt->num_entries * pHba->hrt->entry_len << 2, + pHba->hrt, pHba->hrt_pa); + } + if(pHba->lct) { + dma_free_coherent(&pHba->pDev->dev, pHba->lct_size, + pHba->lct, pHba->lct_pa); + } + if(pHba->status_block) { + dma_free_coherent(&pHba->pDev->dev, sizeof(i2o_status_block), + pHba->status_block, pHba->status_block_pa); + } + if(pHba->reply_pool) { + dma_free_coherent(&pHba->pDev->dev, + pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, + pHba->reply_pool, pHba->reply_pool_pa); + } for(d = pHba->devices; d ; d = next){ next = d->next; @@ -1239,6 +1262,7 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba) { u32 msg[8]; u8* status; + dma_addr_t addr; u32 m = EMPTY_QUEUE ; ulong timeout = jiffies + (TMOUT_IOPRESET*HZ); @@ -1261,12 +1285,13 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba) schedule_timeout_uninterruptible(1); } while (m == EMPTY_QUEUE); - status = kzalloc(4, GFP_KERNEL|ADDR32); + status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL); if(status == NULL) { adpt_send_nop(pHba, m); printk(KERN_ERR"IOP reset failed - no free memory.\n"); return -ENOMEM; } + memset(status,0,4); msg[0]=EIGHT_WORD_MSG_SIZE|SGL_OFFSET_0; msg[1]=I2O_CMD_ADAPTER_RESET<<24|HOST_TID<<12|ADAPTER_TID; @@ -1274,8 +1299,8 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba) msg[3]=0; msg[4]=0; msg[5]=0; - msg[6]=virt_to_bus(status); - msg[7]=0; + msg[6]=dma_low(addr); + msg[7]=dma_high(addr); memcpy_toio(pHba->msg_addr_virt+m, msg, sizeof(msg)); wmb(); @@ -1285,7 +1310,10 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba) while(*status == 0){ if(time_after(jiffies,timeout)){ printk(KERN_WARNING"%s: IOP Reset Timeout\n",pHba->name); - kfree(status); + /* We lose 4 bytes of "status" here, but we cannot + free these because controller may awake and corrupt + those bytes at any time */ + /* dma_free_coherent(&pHba->pDev->dev, 4, buf, addr); */ return -ETIMEDOUT; } rmb(); @@ -1304,6 +1332,10 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba) } if(time_after(jiffies,timeout)){ printk(KERN_ERR "%s:Timeout waiting for IOP Reset.\n",pHba->name); + /* We lose 4 bytes of "status" here, but we + cannot free these because controller may + awake and corrupt those bytes at any time */ + /* dma_free_coherent(&pHba->pDev->dev, 4, buf, addr); */ return -ETIMEDOUT; } schedule_timeout_uninterruptible(1); @@ -1320,7 +1352,7 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba) PDEBUG("%s: Reset completed.\n", pHba->name); } - kfree(status); + dma_free_coherent(&pHba->pDev->dev, 4, status, addr); #ifdef UARTDELAY // This delay is to allow someone attached to the card through the debug UART to // set up the dump levels that they want before the rest of the initialization sequence @@ -1592,6 +1624,7 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) u32 i = 0; u32 rcode = 0; void *p = NULL; + dma_addr_t addr; ulong flags = 0; memset(&msg, 0, MAX_MESSAGE_SIZE*4); @@ -1646,7 +1679,7 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) } sg_size = sg[i].flag_count & 0xffffff; /* Allocate memory for the transfer */ - p = kmalloc(sg_size, GFP_KERNEL|ADDR32); + p = dma_alloc_coherent(&pHba->pDev->dev, sg_size, &addr, GFP_KERNEL); if(!p) { printk(KERN_DEBUG"%s: Could not allocate SG buffer - size = %d buffer number %d of %d\n", pHba->name,sg_size,i,sg_count); @@ -1743,12 +1776,17 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) cleanup: - if (rcode != -ETIME && rcode != -EINTR) + if (rcode != -ETIME && rcode != -EINTR) { + struct sg_simple_element *sg = + (struct sg_simple_element*) (msg +sg_offset); kfree (reply); - while(sg_index) { - if(sg_list[--sg_index]) { - if (rcode != -ETIME && rcode != -EINTR) - kfree(sg_list[sg_index]); + while(sg_index) { + if(sg_list[--sg_index]) { + dma_free_coherent(&pHba->pDev->dev, + sg[sg_index].flag_count & 0xffffff, + sg_list[sg_index], + sg[sg_index].addr_bus); + } } } return rcode; @@ -1965,7 +2003,16 @@ static irqreturn_t adpt_isr(int irq, void *dev_id) goto out; } } - reply = bus_to_virt(m); + if (pHba->reply_pool_pa <= m && + m < pHba->reply_pool_pa + + (pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4)) { + reply = (u8 *)pHba->reply_pool + + (m - pHba->reply_pool_pa); + } else { + /* Ick, we should *never* be here */ + printk(KERN_ERR "dpti: reply frame not from pool\n"); + reply = (u8 *)bus_to_virt(m); + } if (readl(reply) & MSG_FAIL) { u32 old_m = readl(reply+28); @@ -2008,6 +2055,7 @@ static irqreturn_t adpt_isr(int irq, void *dev_id) } else { // SCSI message cmd = (struct scsi_cmnd*) readl(reply+12); if(cmd != NULL){ + scsi_dma_unmap(cmd); if(cmd->serial_number != 0) { // If not timedout adpt_i2o_to_scsi(reply, cmd); } @@ -2156,7 +2204,7 @@ static s32 adpt_scsi_host_alloc(adpt_hba* pHba, struct scsi_host_template *sht) host->max_lun = 256; host->max_channel = pHba->top_scsi_channel + 1; host->cmd_per_lun = 1; - host->unique_id = (uint) pHba; + host->unique_id = (u32)sys_tbl_pa + pHba->unit; host->sg_tablesize = pHba->sg_tablesize; host->can_queue = pHba->post_fifo_size; @@ -2596,11 +2644,10 @@ static s32 adpt_send_nop(adpt_hba*pHba,u32 m) static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba) { u8 *status; + dma_addr_t addr; u32 __iomem *msg = NULL; int i; ulong timeout = jiffies + TMOUT_INITOUTBOUND*HZ; - u32* ptr; - u32 outbound_frame; // This had to be a 32 bit address u32 m; do { @@ -2619,13 +2666,14 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba) msg=(u32 __iomem *)(pHba->msg_addr_virt+m); - status = kzalloc(4, GFP_KERNEL|ADDR32); + status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL); if (!status) { adpt_send_nop(pHba, m); printk(KERN_WARNING"%s: IOP reset failed - no free memory.\n", pHba->name); return -ENOMEM; } + memset(status, 0, 4); writel(EIGHT_WORD_MSG_SIZE| SGL_OFFSET_6, &msg[0]); writel(I2O_CMD_OUTBOUND_INIT<<24 | HOST_TID<<12 | ADAPTER_TID, &msg[1]); @@ -2634,7 +2682,7 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba) writel(4096, &msg[4]); /* Host page frame size */ writel((REPLY_FRAME_SIZE)<<16|0x80, &msg[5]); /* Outbound msg frame size and Initcode */ writel(0xD0000004, &msg[6]); /* Simple SG LE, EOB */ - writel(virt_to_bus(status), &msg[7]); + writel((u32)addr, &msg[7]); writel(m, pHba->post_port); wmb(); @@ -2649,6 +2697,10 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba) rmb(); if(time_after(jiffies,timeout)){ printk(KERN_WARNING"%s: Timeout Initializing\n",pHba->name); + /* We lose 4 bytes of "status" here, but we + cannot free these because controller may + awake and corrupt those bytes at any time */ + /* dma_free_coherent(&pHba->pDev->dev, 4, status, addr); */ return -ETIMEDOUT; } schedule_timeout_uninterruptible(1); @@ -2657,25 +2709,30 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba) // If the command was successful, fill the fifo with our reply // message packets if(*status != 0x04 /*I2O_EXEC_OUTBOUND_INIT_COMPLETE*/) { - kfree(status); + dma_free_coherent(&pHba->pDev->dev, 4, status, addr); return -2; } - kfree(status); + dma_free_coherent(&pHba->pDev->dev, 4, status, addr); - kfree(pHba->reply_pool); + if(pHba->reply_pool != NULL) { + dma_free_coherent(&pHba->pDev->dev, + pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, + pHba->reply_pool, pHba->reply_pool_pa); + } - pHba->reply_pool = kzalloc(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, GFP_KERNEL|ADDR32); + pHba->reply_pool = dma_alloc_coherent(&pHba->pDev->dev, + pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, + &pHba->reply_pool_pa, GFP_KERNEL); if (!pHba->reply_pool) { printk(KERN_ERR "%s: Could not allocate reply pool\n", pHba->name); return -ENOMEM; } + memset(pHba->reply_pool, 0 , pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4); - ptr = pHba->reply_pool; for(i = 0; i < pHba->reply_fifo_size; i++) { - outbound_frame = (u32)virt_to_bus(ptr); - writel(outbound_frame, pHba->reply_port); + writel(pHba->reply_pool_pa + (i * REPLY_FRAME_SIZE * 4), + pHba->reply_port); wmb(); - ptr += REPLY_FRAME_SIZE; } adpt_i2o_status_get(pHba); return 0; @@ -2699,11 +2756,11 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba) u32 m; u32 __iomem *msg; u8 *status_block=NULL; - ulong status_block_bus; if(pHba->status_block == NULL) { - pHba->status_block = (i2o_status_block*) - kmalloc(sizeof(i2o_status_block),GFP_KERNEL|ADDR32); + pHba->status_block = dma_alloc_coherent(&pHba->pDev->dev, + sizeof(i2o_status_block), + &pHba->status_block_pa, GFP_KERNEL); if(pHba->status_block == NULL) { printk(KERN_ERR "dpti%d: Get Status Block failed; Out of memory. \n", @@ -2713,7 +2770,6 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba) } memset(pHba->status_block, 0, sizeof(i2o_status_block)); status_block = (u8*)(pHba->status_block); - status_block_bus = virt_to_bus(pHba->status_block); timeout = jiffies+TMOUT_GETSTATUS*HZ; do { rmb(); @@ -2738,8 +2794,8 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba) writel(0, &msg[3]); writel(0, &msg[4]); writel(0, &msg[5]); - writel(((u32)status_block_bus)&0xffffffff, &msg[6]); - writel(0, &msg[7]); + writel( dma_low(pHba->status_block_pa), &msg[6]); + writel( dma_high(pHba->status_block_pa), &msg[7]); writel(sizeof(i2o_status_block), &msg[8]); // 88 bytes //post message @@ -2819,7 +2875,9 @@ static int adpt_i2o_lct_get(adpt_hba* pHba) } do { if (pHba->lct == NULL) { - pHba->lct = kmalloc(pHba->lct_size, GFP_KERNEL|ADDR32); + pHba->lct = dma_alloc_coherent(&pHba->pDev->dev, + pHba->lct_size, &pHba->lct_pa, + GFP_KERNEL); if(pHba->lct == NULL) { printk(KERN_CRIT "%s: Lct Get failed. Out of memory.\n", pHba->name); @@ -2835,7 +2893,7 @@ static int adpt_i2o_lct_get(adpt_hba* pHba) msg[4] = 0xFFFFFFFF; /* All devices */ msg[5] = 0x00000000; /* Report now */ msg[6] = 0xD0000000|pHba->lct_size; - msg[7] = virt_to_bus(pHba->lct); + msg[7] = (u32)pHba->lct_pa; if ((ret=adpt_i2o_post_wait(pHba, msg, sizeof(msg), 360))) { printk(KERN_ERR "%s: LCT Get failed (status=%#10x.\n", @@ -2846,7 +2904,8 @@ static int adpt_i2o_lct_get(adpt_hba* pHba) if ((pHba->lct->table_size << 2) > pHba->lct_size) { pHba->lct_size = pHba->lct->table_size << 2; - kfree(pHba->lct); + dma_free_coherent(&pHba->pDev->dev, pHba->lct_size, + pHba->lct, pHba->lct_pa); pHba->lct = NULL; } } while (pHba->lct == NULL); @@ -2871,25 +2930,30 @@ static int adpt_i2o_lct_get(adpt_hba* pHba) static int adpt_i2o_build_sys_table(void) { - adpt_hba* pHba = NULL; + adpt_hba* pHba = hba_chain; int count = 0; + if (sys_tbl) + dma_free_coherent(&pHba->pDev->dev, sys_tbl_len, + sys_tbl, sys_tbl_pa); + sys_tbl_len = sizeof(struct i2o_sys_tbl) + // Header + IOPs (hba_count) * sizeof(struct i2o_sys_tbl_entry); - kfree(sys_tbl); - - sys_tbl = kzalloc(sys_tbl_len, GFP_KERNEL|ADDR32); + sys_tbl = dma_alloc_coherent(&pHba->pDev->dev, + sys_tbl_len, &sys_tbl_pa, GFP_KERNEL); if (!sys_tbl) { printk(KERN_WARNING "SysTab Set failed. Out of memory.\n"); return -ENOMEM; } + memset(sys_tbl, 0, sys_tbl_len); sys_tbl->num_entries = hba_count; sys_tbl->version = I2OVERSION; sys_tbl->change_ind = sys_tbl_ind++; for(pHba = hba_chain; pHba; pHba = pHba->next) { + u64 addr; // Get updated Status Block so we have the latest information if (adpt_i2o_status_get(pHba)) { sys_tbl->num_entries--; @@ -2905,8 +2969,9 @@ static int adpt_i2o_build_sys_table(void) sys_tbl->iops[count].frame_size = pHba->status_block->inbound_frame_size; sys_tbl->iops[count].last_changed = sys_tbl_ind - 1; // ?? sys_tbl->iops[count].iop_capabilities = pHba->status_block->iop_capabilities; - sys_tbl->iops[count].inbound_low = (u32)virt_to_bus(pHba->post_port); - sys_tbl->iops[count].inbound_high = (u32)((u64)virt_to_bus(pHba->post_port)>>32); + addr = pHba->base_addr_phys + 0x40; + sys_tbl->iops[count].inbound_low = dma_low(addr); + sys_tbl->iops[count].inbound_high = dma_high(addr); count++; } @@ -3042,7 +3107,8 @@ static s32 adpt_i2o_hrt_get(adpt_hba* pHba) do { if (pHba->hrt == NULL) { - pHba->hrt=kmalloc(size, GFP_KERNEL|ADDR32); + pHba->hrt = dma_alloc_coherent(&pHba->pDev->dev, + size, &pHba->hrt_pa, GFP_KERNEL); if (pHba->hrt == NULL) { printk(KERN_CRIT "%s: Hrt Get failed; Out of memory.\n", pHba->name); return -ENOMEM; @@ -3054,7 +3120,7 @@ static s32 adpt_i2o_hrt_get(adpt_hba* pHba) msg[2]= 0; msg[3]= 0; msg[4]= (0xD0000000 | size); /* Simple transaction */ - msg[5]= virt_to_bus(pHba->hrt); /* Dump it here */ + msg[5]= (u32)pHba->hrt_pa; /* Dump it here */ if ((ret = adpt_i2o_post_wait(pHba, msg, sizeof(msg),20))) { printk(KERN_ERR "%s: Unable to get HRT (status=%#10x)\n", pHba->name, ret); @@ -3062,8 +3128,10 @@ static s32 adpt_i2o_hrt_get(adpt_hba* pHba) } if (pHba->hrt->num_entries * pHba->hrt->entry_len << 2 > size) { - size = pHba->hrt->num_entries * pHba->hrt->entry_len << 2; - kfree(pHba->hrt); + int newsize = pHba->hrt->num_entries * pHba->hrt->entry_len << 2; + dma_free_coherent(&pHba->pDev->dev, size, + pHba->hrt, pHba->hrt_pa); + size = newsize; pHba->hrt = NULL; } } while(pHba->hrt == NULL); @@ -3077,33 +3145,54 @@ static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid, int group, int field, void *buf, int buflen) { u16 opblk[] = { 1, 0, I2O_PARAMS_FIELD_GET, group, 1, field }; - u8 *resblk; + u8 *opblk_va; + dma_addr_t opblk_pa; + u8 *resblk_va; + dma_addr_t resblk_pa; int size; /* 8 bytes for header */ - resblk = kmalloc(sizeof(u8) * (8+buflen), GFP_KERNEL|ADDR32); - if (resblk == NULL) { + resblk_va = dma_alloc_coherent(&pHba->pDev->dev, + sizeof(u8) * (8 + buflen), &resblk_pa, GFP_KERNEL); + if (resblk_va == NULL) { printk(KERN_CRIT "%s: query scalar failed; Out of memory.\n", pHba->name); return -ENOMEM; } + opblk_va = dma_alloc_coherent(&pHba->pDev->dev, + sizeof(opblk), &opblk_pa, GFP_KERNEL); + if (opblk_va == NULL) { + dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen), + resblk_va, resblk_pa); + printk(KERN_CRIT "%s: query operatio failed; Out of memory.\n", + pHba->name); + return -ENOMEM; + } if (field == -1) /* whole group */ opblk[4] = -1; + memcpy(opblk_va, opblk, sizeof(opblk)); size = adpt_i2o_issue_params(I2O_CMD_UTIL_PARAMS_GET, pHba, tid, - opblk, sizeof(opblk), resblk, sizeof(u8)*(8+buflen)); + opblk_va, opblk_pa, sizeof(opblk), + resblk_va, resblk_pa, sizeof(u8)*(8+buflen)); + dma_free_coherent(&pHba->pDev->dev, sizeof(opblk), opblk_va, opblk_pa); if (size == -ETIME) { + dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen), + resblk_va, resblk_pa); printk(KERN_WARNING "%s: issue params failed; Timed out.\n", pHba->name); return -ETIME; } else if (size == -EINTR) { + dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen), + resblk_va, resblk_pa); printk(KERN_WARNING "%s: issue params failed; Interrupted.\n", pHba->name); return -EINTR; } - memcpy(buf, resblk+8, buflen); /* cut off header */ + memcpy(buf, resblk_va+8, buflen); /* cut off header */ - kfree(resblk); + dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen), + resblk_va, resblk_pa); if (size < 0) return size; @@ -3120,10 +3209,11 @@ static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid, * ResultCount, ErrorInfoSize, BlockStatus and BlockSize. */ static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid, - void *opblk, int oplen, void *resblk, int reslen) + void *opblk_va, dma_addr_t opblk_pa, int oplen, + void *resblk_va, dma_addr_t resblk_pa, int reslen) { u32 msg[9]; - u32 *res = (u32 *)resblk; + u32 *res = (u32 *)resblk_va; int wait_status; msg[0] = NINE_WORD_MSG_SIZE | SGL_OFFSET_5; @@ -3132,12 +3222,12 @@ static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid, msg[3] = 0; msg[4] = 0; msg[5] = 0x54000000 | oplen; /* OperationBlock */ - msg[6] = virt_to_bus(opblk); + msg[6] = (u32)opblk_pa; msg[7] = 0xD0000000 | reslen; /* ResultBlock */ - msg[8] = virt_to_bus(resblk); + msg[8] = (u32)resblk_pa; if ((wait_status = adpt_i2o_post_wait(pHba, msg, sizeof(msg), 20))) { - printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk); + printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk_va); return wait_status; /* -DetailedStatus */ } @@ -3240,7 +3330,7 @@ static int adpt_i2o_systab_send(adpt_hba* pHba) * Private i/o space declaration */ msg[6] = 0x54000000 | sys_tbl_len; - msg[7] = virt_to_phys(sys_tbl); + msg[7] = (u32)sys_tbl_pa; msg[8] = 0x54000000 | 0; msg[9] = 0; msg[10] = 0xD4000000 | 0; diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h index acc692915b4c..5181b92c9ddb 100644 --- a/drivers/scsi/dpti.h +++ b/drivers/scsi/dpti.h @@ -228,14 +228,18 @@ typedef struct _adpt_hba { u32 post_fifo_size; u32 reply_fifo_size; u32* reply_pool; + dma_addr_t reply_pool_pa; u32 sg_tablesize; // Scatter/Gather List Size. u8 top_scsi_channel; u8 top_scsi_id; u8 top_scsi_lun; i2o_status_block* status_block; + dma_addr_t status_block_pa; i2o_hrt* hrt; + dma_addr_t hrt_pa; i2o_lct* lct; + dma_addr_t lct_pa; uint lct_size; struct i2o_device* devices; struct adpt_channel channel[MAX_CHANNEL]; @@ -271,7 +275,8 @@ static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid, static const char *adpt_i2o_get_class_name(int class); #endif static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid, - void *opblk, int oplen, void *resblk, int reslen); + void *opblk, dma_addr_t opblk_pa, int oplen, + void *resblk, dma_addr_t resblk_pa, int reslen); static int adpt_i2o_post_wait(adpt_hba* pHba, u32* msg, int len, int timeout); static int adpt_i2o_lct_get(adpt_hba* pHba); static int adpt_i2o_parse_lct(adpt_hba* pHba); From 62ac5aedc51485d672a5d91c262a001acecbe447 Mon Sep 17 00:00:00 2001 From: Miquel van Smoorenburg Date: Fri, 2 May 2008 01:07:27 +0200 Subject: [PATCH 16/19] [SCSI] dpt_i2o: 64 bit support This is the code to actually support 64 bit platforms. 64 bit DMA is enabled on both x86_32 PAE and 64 bit platforms. This code is based in part on the unofficial adaptec 64-bit dpt_i2o driver update that I got from Mark Salyzyn at Adaptec. Signed-off-by: Miquel van Smoorenburg Acked-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 3 +- drivers/scsi/dpt/dpti_ioctl.h | 16 +- drivers/scsi/dpt/dptsig.h | 8 +- drivers/scsi/dpt/sys_info.h | 4 +- drivers/scsi/dpt_i2o.c | 280 +++++++++++++++++++++++++++++----- drivers/scsi/dpti.h | 2 + 6 files changed, 260 insertions(+), 53 deletions(-) diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 99c57b0c1d54..46d7e400c8be 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -504,10 +504,9 @@ config SCSI_AIC7XXX_OLD source "drivers/scsi/aic7xxx/Kconfig.aic79xx" source "drivers/scsi/aic94xx/Kconfig" -# All the I2O code and drivers do not seem to be 64bit safe. config SCSI_DPT_I2O tristate "Adaptec I2O RAID support " - depends on !64BIT && SCSI && PCI && VIRT_TO_BUS + depends on SCSI && PCI && VIRT_TO_BUS help This driver supports all of Adaptec's I2O based RAID controllers as well as the DPT SmartRaid V cards. This is an Adaptec maintained diff --git a/drivers/scsi/dpt/dpti_ioctl.h b/drivers/scsi/dpt/dpti_ioctl.h index cc784e8f6e9d..f60236721e0d 100644 --- a/drivers/scsi/dpt/dpti_ioctl.h +++ b/drivers/scsi/dpt/dpti_ioctl.h @@ -89,7 +89,7 @@ typedef struct { int njobs; /* # of jobs sent to HA */ int qdepth; /* Controller queue depth. */ int wakebase; /* mpx wakeup base index. */ - uLONG SGsize; /* Scatter/Gather list size. */ + uINT SGsize; /* Scatter/Gather list size. */ unsigned heads; /* heads for drives on cntlr. */ unsigned sectors; /* sectors for drives on cntlr. */ uCHAR do_drive32; /* Flag for Above 16 MB Ability */ @@ -97,8 +97,8 @@ typedef struct { char idPAL[4]; /* 4 Bytes Of The ID Pal */ uCHAR primary; /* 1 For Primary, 0 For Secondary */ uCHAR eataVersion; /* EATA Version */ - uLONG cpLength; /* EATA Command Packet Length */ - uLONG spLength; /* EATA Status Packet Length */ + uINT cpLength; /* EATA Command Packet Length */ + uINT spLength; /* EATA Status Packet Length */ uCHAR drqNum; /* DRQ Index (0,5,6,7) */ uCHAR flag1; /* EATA Flags 1 (Byte 9) */ uCHAR flag2; /* EATA Flags 2 (Byte 30) */ @@ -107,23 +107,23 @@ typedef struct { typedef struct { uSHORT length; // Remaining length of this uSHORT drvrHBAnum; // Relative HBA # used by the driver - uLONG baseAddr; // Base I/O address + uINT baseAddr; // Base I/O address uSHORT blinkState; // Blink LED state (0=Not in blink LED) uCHAR pciBusNum; // PCI Bus # (Optional) uCHAR pciDeviceNum; // PCI Device # (Optional) uSHORT hbaFlags; // Miscellaneous HBA flags uSHORT Interrupt; // Interrupt set for this device. # if (defined(_DPT_ARC)) - uLONG baseLength; + uINT baseLength; ADAPTER_OBJECT *AdapterObject; LARGE_INTEGER DmaLogicalAddress; PVOID DmaVirtualAddress; LARGE_INTEGER ReplyLogicalAddress; PVOID ReplyVirtualAddress; # else - uLONG reserved1; // Reserved for future expansion - uLONG reserved2; // Reserved for future expansion - uLONG reserved3; // Reserved for future expansion + uINT reserved1; // Reserved for future expansion + uINT reserved2; // Reserved for future expansion + uINT reserved3; // Reserved for future expansion # endif } drvrHBAinfo_S; diff --git a/drivers/scsi/dpt/dptsig.h b/drivers/scsi/dpt/dptsig.h index 94bc894d1200..72c8992fdf21 100644 --- a/drivers/scsi/dpt/dptsig.h +++ b/drivers/scsi/dpt/dptsig.h @@ -33,11 +33,7 @@ /* to make sure we are talking the same size under all OS's */ typedef unsigned char sigBYTE; typedef unsigned short sigWORD; -#if (defined(_MULTI_DATAMODEL) && defined(sun) && !defined(_ILP32)) -typedef uint32_t sigLONG; -#else -typedef unsigned long sigLONG; -#endif +typedef unsigned int sigINT; /* * use sigWORDLittleEndian for: @@ -300,7 +296,7 @@ typedef struct dpt_sig { sigBYTE dsFiletype; /* type of file */ sigBYTE dsFiletypeFlags; /* flags to specify load type, etc. */ sigBYTE dsOEM; /* OEM file was created for */ - sigLONG dsOS; /* which Operating systems */ + sigINT dsOS; /* which Operating systems */ sigWORD dsCapabilities; /* RAID levels, etc. */ sigWORD dsDeviceSupp; /* Types of SCSI devices supported */ sigWORD dsAdapterSupp; /* DPT adapter families supported */ diff --git a/drivers/scsi/dpt/sys_info.h b/drivers/scsi/dpt/sys_info.h index d23b70c8c768..a90c4cb8ea8b 100644 --- a/drivers/scsi/dpt/sys_info.h +++ b/drivers/scsi/dpt/sys_info.h @@ -145,8 +145,8 @@ uCHAR smartROMRevision; uSHORT flags; /* See bit definitions above */ uSHORT conventionalMemSize; /* in KB */ - uLONG extendedMemSize; /* in KB */ - uLONG osType; /* Same as DPTSIG's definition */ + uINT extendedMemSize; /* in KB */ + uINT osType; /* Same as DPTSIG's definition */ uCHAR osMajorVersion; uCHAR osMinorVersion; /* The OS version */ uCHAR osRevision; diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 7b1a084ec94e..dc6b2d4a9aa1 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -111,10 +111,17 @@ static int sys_tbl_len; static adpt_hba* hba_chain = NULL; static int hba_count = 0; +#ifdef CONFIG_COMPAT +static long compat_adpt_ioctl(struct file *, unsigned int, unsigned long); +#endif + static const struct file_operations adpt_fops = { .ioctl = adpt_ioctl, .open = adpt_open, - .release = adpt_close + .release = adpt_close, +#ifdef CONFIG_COMPAT + .compat_ioctl = compat_adpt_ioctl, +#endif }; /* Structures and definitions for synchronous message posting. @@ -138,6 +145,11 @@ static DEFINE_SPINLOCK(adpt_post_wait_lock); *============================================================================ */ +static inline int dpt_dma64(adpt_hba *pHba) +{ + return (sizeof(dma_addr_t) > 4 && (pHba)->dma64); +} + static inline u32 dma_high(dma_addr_t addr) { return upper_32_bits(addr); @@ -277,7 +289,7 @@ static int adpt_release(struct Scsi_Host *host) static void adpt_inquiry(adpt_hba* pHba) { - u32 msg[14]; + u32 msg[17]; u32 *mptr; u32 *lenptr; int direction; @@ -301,7 +313,10 @@ static void adpt_inquiry(adpt_hba* pHba) direction = 0x00000000; scsidir =0x40000000; // DATA IN (iop<--dev) - reqlen = 14; // SINGLE SGE + if (dpt_dma64(pHba)) + reqlen = 17; // SINGLE SGE, 64 bit + else + reqlen = 14; // SINGLE SGE, 32 bit /* Stick the headers on */ msg[0] = reqlen<<16 | SGL_OFFSET_12; msg[1] = (0xff<<24|HOST_TID<<12|ADAPTER_TID); @@ -334,8 +349,16 @@ static void adpt_inquiry(adpt_hba* pHba) /* Now fill in the SGList and command */ *lenptr = len; - *mptr++ = 0xD0000000|direction|len; - *mptr++ = addr; + if (dpt_dma64(pHba)) { + *mptr++ = (0x7C<<24)+(2<<16)+0x02; /* Enable 64 bit */ + *mptr++ = 1 << PAGE_SHIFT; + *mptr++ = 0xD0000000|direction|len; + *mptr++ = dma_low(addr); + *mptr++ = dma_high(addr); + } else { + *mptr++ = 0xD0000000|direction|len; + *mptr++ = addr; + } // Send it on it's way rcode = adpt_i2o_post_wait(pHba, msg, reqlen<<2, 120); @@ -628,6 +651,92 @@ static int adpt_proc_info(struct Scsi_Host *host, char *buffer, char **start, of return len; } +/* + * Turn a struct scsi_cmnd * into a unique 32 bit 'context'. + */ +static u32 adpt_cmd_to_context(struct scsi_cmnd *cmd) +{ + return (u32)cmd->serial_number; +} + +/* + * Go from a u32 'context' to a struct scsi_cmnd * . + * This could probably be made more efficient. + */ +static struct scsi_cmnd * + adpt_cmd_from_context(adpt_hba * pHba, u32 context) +{ + struct scsi_cmnd * cmd; + struct scsi_device * d; + + if (context == 0) + return NULL; + + spin_unlock(pHba->host->host_lock); + shost_for_each_device(d, pHba->host) { + unsigned long flags; + spin_lock_irqsave(&d->list_lock, flags); + list_for_each_entry(cmd, &d->cmd_list, list) { + if (((u32)cmd->serial_number == context)) { + spin_unlock_irqrestore(&d->list_lock, flags); + scsi_device_put(d); + spin_lock(pHba->host->host_lock); + return cmd; + } + } + spin_unlock_irqrestore(&d->list_lock, flags); + } + spin_lock(pHba->host->host_lock); + + return NULL; +} + +/* + * Turn a pointer to ioctl reply data into an u32 'context' + */ +static u32 adpt_ioctl_to_context(adpt_hba * pHba, void *reply) +{ +#if BITS_PER_LONG == 32 + return (u32)(unsigned long)reply; +#else + ulong flags = 0; + u32 nr, i; + + spin_lock_irqsave(pHba->host->host_lock, flags); + nr = ARRAY_SIZE(pHba->ioctl_reply_context); + for (i = 0; i < nr; i++) { + if (pHba->ioctl_reply_context[i] == NULL) { + pHba->ioctl_reply_context[i] = reply; + break; + } + } + spin_unlock_irqrestore(pHba->host->host_lock, flags); + if (i >= nr) { + kfree (reply); + printk(KERN_WARNING"%s: Too many outstanding " + "ioctl commands\n", pHba->name); + return (u32)-1; + } + + return i; +#endif +} + +/* + * Go from an u32 'context' to a pointer to ioctl reply data. + */ +static void *adpt_ioctl_from_context(adpt_hba *pHba, u32 context) +{ +#if BITS_PER_LONG == 32 + return (void *)(unsigned long)context; +#else + void *p = pHba->ioctl_reply_context[context]; + pHba->ioctl_reply_context[context] = NULL; + + return p; +#endif +} + /*=========================================================================== * Error Handling routines *=========================================================================== @@ -655,7 +764,7 @@ static int adpt_abort(struct scsi_cmnd * cmd) msg[1] = I2O_CMD_SCSI_ABORT<<24|HOST_TID<<12|dptdevice->tid; msg[2] = 0; msg[3]= 0; - msg[4] = (u32)cmd; + msg[4] = adpt_cmd_to_context(cmd); if (pHba->host) spin_lock_irq(pHba->host->host_lock); rcode = adpt_i2o_post_wait(pHba, msg, sizeof(msg), FOREVER); @@ -867,6 +976,7 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev u32 hba_map1_area_size = 0; void __iomem *base_addr_virt = NULL; void __iomem *msg_addr_virt = NULL; + int dma64 = 0; int raptorFlag = FALSE; @@ -880,7 +990,16 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev } pci_set_master(pDev); - if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) + + /* + * See if we should enable dma64 mode. + */ + if (sizeof(dma_addr_t) > 4 && + pci_set_dma_mask(pDev, DMA_64BIT_MASK) == 0) { + if (dma_get_required_mask(&pDev->dev) > DMA_32BIT_MASK) + dma64 = 1; + } + if (!dma64 && pci_set_dma_mask(pDev, DMA_32BIT_MASK) != 0) return -EINVAL; /* adapter only supports message blocks below 4GB */ @@ -906,6 +1025,25 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev raptorFlag = TRUE; } +#if BITS_PER_LONG == 64 + /* + * The original Adaptec 64 bit driver has this comment here: + * "x86_64 machines need more optimal mappings" + * + * I assume some HBAs report ridiculously large mappings + * and we need to limit them on platforms with IOMMUs. + */ + if (raptorFlag == TRUE) { + if (hba_map0_area_size > 128) + hba_map0_area_size = 128; + if (hba_map1_area_size > 524288) + hba_map1_area_size = 524288; + } else { + if (hba_map0_area_size > 524288) + hba_map0_area_size = 524288; + } +#endif + base_addr_virt = ioremap(base_addr0_phys,hba_map0_area_size); if (!base_addr_virt) { pci_release_regions(pDev); @@ -968,16 +1106,22 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev pHba->state = DPTI_STATE_RESET; pHba->pDev = pDev; pHba->devices = NULL; + pHba->dma64 = dma64; // Initializing the spinlocks spin_lock_init(&pHba->state_lock); spin_lock_init(&adpt_post_wait_lock); if(raptorFlag == 0){ - printk(KERN_INFO"Adaptec I2O RAID controller %d at %p size=%x irq=%d\n", - hba_count-1, base_addr_virt, hba_map0_area_size, pDev->irq); + printk(KERN_INFO "Adaptec I2O RAID controller" + " %d at %p size=%x irq=%d%s\n", + hba_count-1, base_addr_virt, + hba_map0_area_size, pDev->irq, + dma64 ? " (64-bit DMA)" : ""); } else { - printk(KERN_INFO"Adaptec I2O RAID controller %d irq=%d\n",hba_count-1, pDev->irq); + printk(KERN_INFO"Adaptec I2O RAID controller %d irq=%d%s\n", + hba_count-1, pDev->irq, + dma64 ? " (64-bit DMA)" : ""); printk(KERN_INFO" BAR0 %p - size= %x\n",base_addr_virt,hba_map0_area_size); printk(KERN_INFO" BAR1 %p - size= %x\n",msg_addr_virt,hba_map1_area_size); } @@ -1030,6 +1174,8 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba) if(pHba->msg_addr_virt != pHba->base_addr_virt){ iounmap(pHba->msg_addr_virt); } + if(pHba->FwDebugBuffer_P) + iounmap(pHba->FwDebugBuffer_P); if(pHba->hrt) { dma_free_coherent(&pHba->pDev->dev, pHba->hrt->num_entries * pHba->hrt->entry_len << 2, @@ -1657,10 +1803,13 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) } sg_offset = (msg[0]>>4)&0xf; msg[2] = 0x40000000; // IOCTL context - msg[3] = (u32)reply; + msg[3] = adpt_ioctl_to_context(pHba, reply); + if (msg[3] == (u32)-1) + return -EBUSY; + memset(sg_list,0, sizeof(sg_list[0])*pHba->sg_tablesize); if(sg_offset) { - // TODO 64bit fix + // TODO add 64 bit API struct sg_simple_element *sg = (struct sg_simple_element*) (msg+sg_offset); sg_count = (size - sg_offset*4) / sizeof(struct sg_simple_element); if (sg_count > pHba->sg_tablesize){ @@ -1689,15 +1838,15 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) sg_list[sg_index++] = p; // sglist indexed with input frame, not our internal frame. /* Copy in the user's SG buffer if necessary */ if(sg[i].flag_count & 0x04000000 /*I2O_SGL_FLAGS_DIR*/) { - // TODO 64bit fix - if (copy_from_user(p,(void __user *)sg[i].addr_bus, sg_size)) { + // sg_simple_element API is 32 bit + if (copy_from_user(p,(void __user *)(ulong)sg[i].addr_bus, sg_size)) { printk(KERN_DEBUG"%s: Could not copy SG buf %d FROM user\n",pHba->name,i); rcode = -EFAULT; goto cleanup; } } - //TODO 64bit fix - sg[i].addr_bus = (u32)virt_to_bus(p); + /* sg_simple_element API is 32 bit, but addr < 4GB */ + sg[i].addr_bus = addr; } } @@ -1725,7 +1874,7 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) if(sg_offset) { /* Copy back the Scatter Gather buffers back to user space */ u32 j; - // TODO 64bit fix + // TODO add 64 bit API struct sg_simple_element* sg; int sg_size; @@ -1745,14 +1894,14 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) } sg_count = (size - sg_offset*4) / sizeof(struct sg_simple_element); - // TODO 64bit fix + // TODO add 64 bit API sg = (struct sg_simple_element*)(msg + sg_offset); for (j = 0; j < sg_count; j++) { /* Copy out the SG list to user's buffer if necessary */ if(! (sg[j].flag_count & 0x4000000 /*I2O_SGL_FLAGS_DIR*/)) { sg_size = sg[j].flag_count & 0xffffff; - // TODO 64bit fix - if (copy_to_user((void __user *)sg[j].addr_bus,sg_list[j], sg_size)) { + // sg_simple_element API is 32 bit + if (copy_to_user((void __user *)(ulong)sg[j].addr_bus,sg_list[j], sg_size)) { printk(KERN_WARNING"%s: Could not copy %p TO user %x\n",pHba->name, sg_list[j], sg[j].addr_bus); rcode = -EFAULT; goto cleanup; @@ -1972,6 +2121,38 @@ static int adpt_ioctl(struct inode *inode, struct file *file, uint cmd, return error; } +#ifdef CONFIG_COMPAT +static long compat_adpt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct inode *inode; + long ret; + + inode = file->f_dentry->d_inode; + + lock_kernel(); + + switch(cmd) { + case DPT_SIGNATURE: + case I2OUSRCMD: + case DPT_CTRLINFO: + case DPT_SYSINFO: + case DPT_BLINKLED: + case I2ORESETCMD: + case I2ORESCANCMD: + case (DPT_TARGET_BUSY & 0xFFFF): + case DPT_TARGET_BUSY: + ret = adpt_ioctl(inode, file, cmd, arg); + break; + default: + ret = -ENOIOCTLCMD; + } + + unlock_kernel(); + + return ret; +} +#endif static irqreturn_t adpt_isr(int irq, void *dev_id) { @@ -2032,7 +2213,7 @@ static irqreturn_t adpt_isr(int irq, void *dev_id) } context = readl(reply+8); if(context & 0x40000000){ // IOCTL - void *p = (void *)readl(reply+12); + void *p = adpt_ioctl_from_context(pHba, readl(reply+12)); if( p != NULL) { memcpy_fromio(p, reply, REPLY_FRAME_SIZE * 4); } @@ -2046,14 +2227,15 @@ static irqreturn_t adpt_isr(int irq, void *dev_id) status = I2O_POST_WAIT_OK; } if(!(context & 0x40000000)) { - cmd = (struct scsi_cmnd*) readl(reply+12); + cmd = adpt_cmd_from_context(pHba, + readl(reply+12)); if(cmd != NULL) { printk(KERN_WARNING"%s: Apparent SCSI cmd in Post Wait Context - cmd=%p context=%x\n", pHba->name, cmd, context); } } adpt_i2o_post_wait_complete(context, status); } else { // SCSI message - cmd = (struct scsi_cmnd*) readl(reply+12); + cmd = adpt_cmd_from_context (pHba, readl(reply+12)); if(cmd != NULL){ scsi_dma_unmap(cmd); if(cmd->serial_number != 0) { // If not timedout @@ -2076,6 +2258,7 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d int i; u32 msg[MAX_MESSAGE_SIZE]; u32* mptr; + u32* lptr; u32 *lenptr; int direction; int scsidir; @@ -2083,6 +2266,7 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d u32 len; u32 reqlen; s32 rcode; + dma_addr_t addr; memset(msg, 0 , sizeof(msg)); len = scsi_bufflen(cmd); @@ -2122,7 +2306,7 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d // I2O_CMD_SCSI_EXEC msg[1] = ((0xff<<24)|(HOST_TID<<12)|d->tid); msg[2] = 0; - msg[3] = (u32)cmd; /* We want the SCSI control block back */ + msg[3] = adpt_cmd_to_context(cmd); /* Want SCSI control block back */ // Our cards use the transaction context as the tag for queueing // Adaptec/DPT Private stuff msg[4] = I2O_CMD_SCSI_EXEC|(DPT_ORGANIZATION_ID<<16); @@ -2140,7 +2324,13 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d memcpy(mptr, cmd->cmnd, cmd->cmd_len); mptr+=4; lenptr=mptr++; /* Remember me - fill in when we know */ - reqlen = 14; // SINGLE SGE + if (dpt_dma64(pHba)) { + reqlen = 16; // SINGLE SGE + *mptr++ = (0x7C<<24)+(2<<16)+0x02; /* Enable 64 bit */ + *mptr++ = 1 << PAGE_SHIFT; + } else { + reqlen = 14; // SINGLE SGE + } /* Now fill in the SGList and command */ nseg = scsi_dma_map(cmd); @@ -2150,12 +2340,16 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d len = 0; scsi_for_each_sg(cmd, sg, nseg, i) { + lptr = mptr; *mptr++ = direction|0x10000000|sg_dma_len(sg); len+=sg_dma_len(sg); - *mptr++ = sg_dma_address(sg); + addr = sg_dma_address(sg); + *mptr++ = dma_low(addr); + if (dpt_dma64(pHba)) + *mptr++ = dma_high(addr); /* Make this an end of list */ if (i == nseg - 1) - mptr[-2] = direction|0xD0000000|sg_dma_len(sg); + *lptr = direction|0xD0000000|sg_dma_len(sg); } reqlen = mptr - msg; *lenptr = len; @@ -2824,7 +3018,17 @@ static s32 adpt_i2o_status_get(adpt_hba* pHba) } // Calculate the Scatter Gather list size - pHba->sg_tablesize = (pHba->status_block->inbound_frame_size * 4 -40)/ sizeof(struct sg_simple_element); + if (dpt_dma64(pHba)) { + pHba->sg_tablesize + = ((pHba->status_block->inbound_frame_size * 4 + - 14 * sizeof(u32)) + / (sizeof(struct sg_simple_element) + sizeof(u32))); + } else { + pHba->sg_tablesize + = ((pHba->status_block->inbound_frame_size * 4 + - 12 * sizeof(u32)) + / sizeof(struct sg_simple_element)); + } if (pHba->sg_tablesize > SG_LIST_ELEMENTS) { pHba->sg_tablesize = SG_LIST_ELEMENTS; } @@ -2916,13 +3120,19 @@ static int adpt_i2o_lct_get(adpt_hba* pHba) // I2O_DPT_EXEC_IOP_BUFFERS_GROUP_NO; if(adpt_i2o_query_scalar(pHba, 0 , 0x8000, -1, buf, sizeof(buf))>=0) { pHba->FwDebugBufferSize = buf[1]; - pHba->FwDebugBuffer_P = pHba->base_addr_virt + buf[0]; - pHba->FwDebugFlags_P = pHba->FwDebugBuffer_P + FW_DEBUG_FLAGS_OFFSET; - pHba->FwDebugBLEDvalue_P = pHba->FwDebugBuffer_P + FW_DEBUG_BLED_OFFSET; - pHba->FwDebugBLEDflag_P = pHba->FwDebugBLEDvalue_P + 1; - pHba->FwDebugStrLength_P = pHba->FwDebugBuffer_P + FW_DEBUG_STR_LENGTH_OFFSET; - pHba->FwDebugBuffer_P += buf[2]; - pHba->FwDebugFlags = 0; + pHba->FwDebugBuffer_P = ioremap(pHba->base_addr_phys + buf[0], + pHba->FwDebugBufferSize); + if (pHba->FwDebugBuffer_P) { + pHba->FwDebugFlags_P = pHba->FwDebugBuffer_P + + FW_DEBUG_FLAGS_OFFSET; + pHba->FwDebugBLEDvalue_P = pHba->FwDebugBuffer_P + + FW_DEBUG_BLED_OFFSET; + pHba->FwDebugBLEDflag_P = pHba->FwDebugBLEDvalue_P + 1; + pHba->FwDebugStrLength_P = pHba->FwDebugBuffer_P + + FW_DEBUG_STR_LENGTH_OFFSET; + pHba->FwDebugBuffer_P += buf[2]; + pHba->FwDebugFlags = 0; + } } return 0; diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h index 5181b92c9ddb..924cd5a51676 100644 --- a/drivers/scsi/dpti.h +++ b/drivers/scsi/dpti.h @@ -233,6 +233,7 @@ typedef struct _adpt_hba { u8 top_scsi_channel; u8 top_scsi_id; u8 top_scsi_lun; + u8 dma64; i2o_status_block* status_block; dma_addr_t status_block_pa; @@ -252,6 +253,7 @@ typedef struct _adpt_hba { void __iomem *FwDebugBLEDflag_P;// Virtual Addr Of FW Debug BLED void __iomem *FwDebugBLEDvalue_P;// Virtual Addr Of FW Debug BLED u32 FwDebugFlags; + u32 *ioctl_reply_context[4]; } adpt_hba; struct sg_simple_element { From 1ed43910956f5faec690ea3214451779e93bbb52 Mon Sep 17 00:00:00 2001 From: Miquel van Smoorenburg Date: Fri, 2 May 2008 01:08:19 +0200 Subject: [PATCH 17/19] [SCSI] dpt_i2o: sysfs code Create a /sys/class/dpt_i2o directory and populate it with dptiN directories. Each dptiN directory contains a "dev" file that makes udev create /dev/dptiN Signed-off-by: Miquel van Smoorenburg Acked-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/dpt_i2o.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index dc6b2d4a9aa1..8939fbf102fc 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -111,6 +111,8 @@ static int sys_tbl_len; static adpt_hba* hba_chain = NULL; static int hba_count = 0; +static struct class *adpt_sysfs_class; + #ifdef CONFIG_COMPAT static long compat_adpt_ioctl(struct file *, unsigned int, unsigned long); #endif @@ -254,6 +256,12 @@ static int adpt_detect(struct scsi_host_template* sht) adpt_inquiry(pHba); } + adpt_sysfs_class = class_create(THIS_MODULE, "dpt_i2o"); + if (IS_ERR(adpt_sysfs_class)) { + printk(KERN_WARNING"dpti: unable to create dpt_i2o class\n"); + adpt_sysfs_class = NULL; + } + for (pHba = hba_chain; pHba; pHba = pHba->next) { if (adpt_scsi_host_alloc(pHba, sht) < 0){ adpt_i2o_delete_hba(pHba); @@ -261,6 +269,16 @@ static int adpt_detect(struct scsi_host_template* sht) } pHba->initialized = TRUE; pHba->state &= ~DPTI_STATE_RESET; + if (adpt_sysfs_class) { + struct device *dev = device_create(adpt_sysfs_class, + NULL, MKDEV(DPTI_I2O_MAJOR, pHba->unit), + "dpti%d", pHba->unit); + if (IS_ERR(dev)) { + printk(KERN_WARNING"dpti%d: unable to " + "create device in dpt_i2o class\n", + pHba->unit); + } + } } // Register our control device node @@ -1212,8 +1230,16 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba) pci_dev_put(pHba->pDev); kfree(pHba); + if (adpt_sysfs_class) + device_destroy(adpt_sysfs_class, + MKDEV(DPTI_I2O_MAJOR, pHba->unit)); + if(hba_count <= 0){ unregister_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER); + if (adpt_sysfs_class) { + class_destroy(adpt_sysfs_class); + adpt_sysfs_class = NULL; + } } } From 392512fbf9407fa1647225143e3f9c28a869ac57 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 2 May 2008 14:21:50 +0100 Subject: [PATCH 18/19] [SCSI] u14-34f: Fix 32bit only problem Another user of 32bit time Signed-off-by: Alan Cox Signed-off-by: James Bottomley --- drivers/scsi/u14-34f.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c index 640333b1e75c..329eb8780e74 100644 --- a/drivers/scsi/u14-34f.c +++ b/drivers/scsi/u14-34f.c @@ -744,7 +744,8 @@ static int wait_on_busy(unsigned long iobase, unsigned int loop) { static int board_inquiry(unsigned int j) { struct mscp *cpp; dma_addr_t id_dma_addr; - unsigned int time, limit = 0; + unsigned int limit = 0; + unsigned long time; id_dma_addr = pci_map_single(HD(j)->pdev, HD(j)->board_id, sizeof(HD(j)->board_id), PCI_DMA_BIDIRECTIONAL); @@ -1392,7 +1393,8 @@ static int u14_34f_eh_abort(struct scsi_cmnd *SCarg) { } static int u14_34f_eh_host_reset(struct scsi_cmnd *SCarg) { - unsigned int i, j, time, k, c, limit = 0; + unsigned int i, j, k, c, limit = 0; + unsigned long time; int arg_done = FALSE; struct scsi_cmnd *SCpnt; From 7ad4a485002c141f156a014e89542e01e7f8e36a Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Fri, 18 Apr 2008 13:57:22 -0700 Subject: [PATCH 19/19] [SCSI] aic94xx: fix section mismatch Fix following warnings: WARNING: vmlinux.o(.data+0x17aa88): Section mismatch in reference from the variable asd_pcidev_data to the function .devinit.text:asd_aic9410_setup() WARNING: vmlinux.o(.data+0x17aa98): Section mismatch in reference from the variable asd_pcidev_data to the function .devinit.text:asd_aic9410_setup() WARNING: vmlinux.o(.data+0x17aaa8): Section mismatch in reference from the variable asd_pcidev_data to the function .devinit.text:asd_aic9405_setup() asd_pcidev_data is only used by __devinit asd_pci_probe. So mark is const and annotate it __devinitconst to fix the warnings. [akpm@linux-foundation.org: fix warning] Signed-off-by: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/aic94xx/aic94xx_init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index 90f5e0a6f2e3..2a730c470f62 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -529,10 +529,10 @@ static void asd_remove_dev_attrs(struct asd_ha_struct *asd_ha) /* The first entry, 0, is used for dynamic ids, the rest for devices * we know about. */ -static struct asd_pcidev_struct { +static const struct asd_pcidev_struct { const char * name; int (*setup)(struct asd_ha_struct *asd_ha); -} asd_pcidev_data[] = { +} asd_pcidev_data[] __devinitconst = { /* Id 0 is used for dynamic ids. */ { .name = "Adaptec AIC-94xx SAS/SATA Host Adapter", .setup = asd_aic9410_setup @@ -735,7 +735,7 @@ static int asd_unregister_sas_ha(struct asd_ha_struct *asd_ha) static int __devinit asd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { - struct asd_pcidev_struct *asd_dev; + const struct asd_pcidev_struct *asd_dev; unsigned asd_id = (unsigned) id->driver_data; struct asd_ha_struct *asd_ha; struct Scsi_Host *shost;