Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/net/wireless/rt2x00/rt2x00lib.h

471 lines
14 KiB
C
Raw Normal View History

[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
/*
rt2x00: Update copyright statements. As mentioned on the linux-wireless mailing list, the current copyright statements in the rt2x00 are meaningless, as the rt2x00 project is not even a formal legal entity. Therefore it is better to replace the existing copyright statements with copyright statements for the people that actually wrote the code. Note: Updated to the best of my knowledge with respect to who contributed considerable amounts of code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-08 08:39:55 -07:00
Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com>
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00lib
Abstract: Data structures and definitions for the rt2x00lib module.
*/
#ifndef RT2X00LIB_H
#define RT2X00LIB_H
/*
* Interval defines
*/
rt2x00: Implement watchdog monitoring Implement watchdog monitoring for USB devices (PCI support can be added later). This will determine if URBs being uploaded to the hardware are actually returning. Both rt2500usb and rt2800usb have shown that URBs being uploaded can remain hanging without being released by the hardware. By using this watchdog, a queue can be reset when this occurs. For rt2800usb it has been tested that the connection is preserved even though this interruption. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-11 04:25:46 -06:00
#define WATCHDOG_INTERVAL round_jiffies_relative(HZ)
rt2x00: Style fix for interval defines Extra parenthesis are not needed in these 2 cases, all other defines in rt2x00 are done without parenthesis so just fixup these 2 cases. Signed-off-by: Alban Browaeys <prahal@yahoo.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-29 14:00:23 -06:00
#define LINK_TUNE_INTERVAL round_jiffies_relative(HZ)
rt2x00: Implement tx power temperature compensation rt2800 devices should adjust their tx power in accordance with the eeproms temperature calibration values. Add a new driver callback gain_calibration that is called every 4 seconds. The rt2800 gain calibration routine simply runs the tx power configuration that takes care of calculating the temperature compensation delta. We don't need to synchronize the calls to rt2800_config_txpower as they should all happen from mac80211's single threaded workqueue. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-28 05:33:40 -06:00
#define AGC_INTERVAL round_jiffies_relative(4 * HZ)
rt2x00:Add VCO recalibration Signed-off-by: John Li <chen-yang.li@mediatek.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-16 06:40:57 -07:00
#define VCO_INTERVAL round_jiffies_relative(10 * HZ) /* 10 sec */
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
rt2x00: Rate structure overhaul Recent changes to the rate structure registration broke rt2x00, the hw_value was reduced from 32bits to 16bits while rt2x00 used the full 32bits. However the way rt2x00 used the value was inflexible and needed to be changed anyway. This patch creates a array containing information for each rate, the hw_value passed to mac80211 is the index value for that array including a field to indicate if short preamble should be enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:50:40 -07:00
/*
* rt2x00_rate: Per rate device information
*/
struct rt2x00_rate {
unsigned short flags;
rt2x00: Cleanup mode registration Don't wildly pass any number for num_rates to rt2x00lib, instead pass which type of rates are supported (CCK, OFDM). Same for num_modes but then for the 2GHZ and 5GHZ band. This makes the interface look much nicer and makes extending it later easier. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-17 09:35:05 -07:00
#define DEV_RATE_CCK 0x0001
#define DEV_RATE_OFDM 0x0002
#define DEV_RATE_SHORT_PREAMBLE 0x0004
rt2x00: Rate structure overhaul Recent changes to the rate structure registration broke rt2x00, the hw_value was reduced from 32bits to 16bits while rt2x00 used the full 32bits. However the way rt2x00 used the value was inflexible and needed to be changed anyway. This patch creates a array containing information for each rate, the hw_value passed to mac80211 is the index value for that array including a field to indicate if short preamble should be enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:50:40 -07:00
unsigned short bitrate; /* In 100kbit/s */
unsigned short ratemask;
unsigned short plcp;
rt2x00: Implement support for 802.11n Extend rt2x00lib capabilities to support 802.11n, it still lacks aggregation support, but that can be added in the future. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-26 08:09:32 -06:00
unsigned short mcs;
rt2x00: Rate structure overhaul Recent changes to the rate structure registration broke rt2x00, the hw_value was reduced from 32bits to 16bits while rt2x00 used the full 32bits. However the way rt2x00 used the value was inflexible and needed to be changed anyway. This patch creates a array containing information for each rate, the hw_value passed to mac80211 is the index value for that array including a field to indicate if short preamble should be enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:50:40 -07:00
};
extern const struct rt2x00_rate rt2x00_supported_rates[12];
static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value)
{
return &rt2x00_supported_rates[hw_value & 0xff];
}
rt2x00: Implement support for 802.11n Extend rt2x00lib capabilities to support 802.11n, it still lacks aggregation support, but that can be added in the future. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-26 08:09:32 -06:00
#define RATE_MCS(__mode, __mcs) \
rt2x00: checkpatch.pl error fixes for rt2x00lib.h rt2x00lib.h:60: ERROR: space prohibited after that open parenthesis '(' rt2x00lib.h:60: ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-06 08:46:53 -06:00
((((__mode) & 0x00ff) << 8) | ((__mcs) & 0x00ff))
rt2x00: Implement support for 802.11n Extend rt2x00lib capabilities to support 802.11n, it still lacks aggregation support, but that can be added in the future. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-26 08:09:32 -06:00
static inline int rt2x00_get_rate_mcs(const u16 mcs_value)
{
return (mcs_value & 0x00ff);
}
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
/*
* Radio control handlers.
*/
int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev);
/*
* Initialization handlers.
*/
rt2x00: Move start() and stop() handlers into rt2x00lib.c suspend & resume was broken since it called rt2x00mac_start() and rt2x00mac_stop() which would fail to execute because the DEVICE_PRESENT flag was not set. Move the start and stop handlers into rt2x00lib.c which are called from rt2x00mac_start() and rt2x00mac_stop() after they have checked the DEVICE_PRESENT flag, while suspend and resume handlers can directly call those functions. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-06 15:40:07 -07:00
int rt2x00lib_start(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
/*
* Configuration handlers.
*/
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:49:59 -07:00
void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
mac80211: use nl80211 interface types There's really no reason for mac80211 to be using its own interface type defines. Use the nl80211 types and simplify the configuration code a bit: there's no need to translate them any more now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 16:01:58 -06:00
enum nl80211_iftype type,
mac80211: constify ieee80211_if_conf.bssid Then one place can be a static const. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-21 04:47:05 -07:00
const u8 *mac, const u8 *bssid);
rt2x00: Rename config_preamble() to config_erp() Rename config_preamble() to config_erp() and cleanup argument list by putting it all into a single structure. This will make the function more meaningful and easier to expand later. This second option is mostly intended to make the patch "mac80211: proper short-slot handling" from Johannes Berg easier to apply for rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 15:46:18 -06:00
void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
rt2x00: Check for specific changed flags when updating the erp config Previously rt2x00 was always updating all erp related config variables even though mac80211 might only have changed one. Hence, pass the changed flags to the config_erp driver callback so that the driver can limit the changes to the correct values. This fixes an issue in AP mode where the beacon interval is not initialized (and thus zero) but still sent to the hardware causing an interrupt storm on rt2800pci hanging the system. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-08 12:56:32 -06:00
struct ieee80211_bss_conf *conf,
u32 changed);
[PATCH] rt2x00: Implement SW diversity When mac80211 indicates that the default antenna setup should be used _and_ that this default setup is SW_DIVERSITY. This requires sampling and storing the RSSI per antenna and check once every 2 seconds to determine if the RSSI has changed significantly. Once this is the case we should sample the other antenna for a short period and evaluate if we need to swap antenna or not. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 08:26:36 -06:00
void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
rt2x00: Don't alter rt2x00dev->default_ant rt2x00dev->default_ant should be initialized once by the driver, and should not be changed afterwards. Because rt2x00lib_config_antenna() was using a reference to the struct antenna_setup it actually had the oppurtunity to change the default antenna setting and it actually did that during the validation. Instead of passing a pointer to antenna_setup the entire structure should be copied. Signed-off-by: Lars Ericsson <Lars_Ericsson@telia.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-18 12:21:52 -06:00
struct antenna_setup ant);
[PATCH] rt2x00: Reorganize rt2x00dev->flags The rt2x00dev->flags has become a chaos over time, this will reorganize the flags by renaming, deleting, adding and properly implement the flags. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-25 12:55:39 -06:00
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
rt2x00: Optimize configuration handling Implement latest changed from mac80211 configuration handling to optmize configuration handling in rt2x00. * Remove set_retry_limit callback function, handled through config() * Move config_antenna to its own callback function, it isn't handled by mac80211 anymore * Use IEEE80211_CONF_CHANGED_* flags and remove manual checks * Removed deprecated short slot setting through config() and put it in config_erp() through which mac80211 now configures it * Remove config_phymode() and move contents to config_erp() since it only managed the basic rates which is now determined by mac80211 through config_erp(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-29 10:17:57 -06:00
struct ieee80211_conf *conf,
const unsigned int changed_flags);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
/**
* DOC: Queue handlers
*/
/**
* rt2x00queue_alloc_rxskb - allocate a skb for RX purposes.
rt2x00: Simplify Queue function arguments A lot of functions accept a struct rt2x00_dev combined with either a struct queue_entry or struct data_queue argument. This can be simplified by only passing on the queue/entry argument. In cases where rt2x00_dev and a sk_buff are send together, we can send the queue_entry instead. rt2x00usb_alloc_urb and rt2x00usb_free_urb have a bit of vague naming. Instead they allocate all the data which belongs to a rt2x00 data queue entry. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11 07:37:25 -06:00
* @entry: The entry for which the skb will be applicable.
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
*/
rt2x00: Use GFP_KERNEL for rx buffer allocation on USB devices Since the RX path on USB devices is handled in process context we can use GFP_KERNEL for RX buffer allocation. This should reduce the likelihood of allocation failures. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Tested-By: Marc Dietrich <marvin24@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-19 05:24:10 -06:00
struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry, gfp_t gfp);
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
/**
* rt2x00queue_free_skb - free a skb
rt2x00: Simplify Queue function arguments A lot of functions accept a struct rt2x00_dev combined with either a struct queue_entry or struct data_queue argument. This can be simplified by only passing on the queue/entry argument. In cases where rt2x00_dev and a sk_buff are send together, we can send the queue_entry instead. rt2x00usb_alloc_urb and rt2x00usb_free_urb have a bit of vague naming. Instead they allocate all the data which belongs to a rt2x00 data queue entry. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11 07:37:25 -06:00
* @entry: The entry for which the skb will be applicable.
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
*/
rt2x00: Simplify Queue function arguments A lot of functions accept a struct rt2x00_dev combined with either a struct queue_entry or struct data_queue argument. This can be simplified by only passing on the queue/entry argument. In cases where rt2x00_dev and a sk_buff are send together, we can send the queue_entry instead. rt2x00usb_alloc_urb and rt2x00usb_free_urb have a bit of vague naming. Instead they allocate all the data which belongs to a rt2x00 data queue entry. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11 07:37:25 -06:00
void rt2x00queue_free_skb(struct queue_entry *entry);
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
rt2x00: Add support for L2 padding during TX/RX Some hardware require L2 padding between header and payload because both must be aligned to a 4-byte boundary. This hardware also is easier during the RX path since we no longer need to move the entire payload but rather only the header to remove the padding (mac80211 only wants the payload to be 4-byte aligned). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-26 08:08:50 -06:00
/**
rt2x00: Reorganize padding & L2 padding The old function rt2x00queue_payload_align() handled both adding and removing L2 padding and some basic frame alignment. The entire function was being abused because it had multiple functions and the header length argument was somtimes used to align the header instead of the payload. Additionally there was a bug when inserting L2 padding that only the payload was aligned but not the header. This happens when the header wasn't aligned properly by mac80211, but rt2x00lib only moves the payload. A secondary problem was that when removing L2 padding during TXdone or RX the skb wasn't resized to the proper size. Split the function into seperate functions each handling its task as it should. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-29 12:30:45 -06:00
* rt2x00queue_align_frame - Align 802.11 frame to 4-byte boundary
* @skb: The skb to align
*
* Align the start of the 802.11 frame to a 4-byte boundary, this could
* mean the payload is not aligned properly though.
*/
void rt2x00queue_align_frame(struct sk_buff *skb);
/**
* rt2x00queue_insert_l2pad - Align 802.11 header & payload to 4-byte boundary
* @skb: The skb to align
* @header_length: Length of 802.11 header
*
* Apply L2 padding to align both header and payload to 4-byte boundary
*/
void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length);
/**
* rt2x00queue_insert_l2pad - Remove L2 padding from 802.11 frame
rt2x00: Add support for L2 padding during TX/RX Some hardware require L2 padding between header and payload because both must be aligned to a 4-byte boundary. This hardware also is easier during the RX path since we no longer need to move the entire payload but rather only the header to remove the padding (mac80211 only wants the payload to be 4-byte aligned). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-26 08:08:50 -06:00
* @skb: The skb to align
* @header_length: Length of 802.11 header
*
rt2x00: Reorganize padding & L2 padding The old function rt2x00queue_payload_align() handled both adding and removing L2 padding and some basic frame alignment. The entire function was being abused because it had multiple functions and the header length argument was somtimes used to align the header instead of the payload. Additionally there was a bug when inserting L2 padding that only the payload was aligned but not the header. This happens when the header wasn't aligned properly by mac80211, but rt2x00lib only moves the payload. A secondary problem was that when removing L2 padding during TXdone or RX the skb wasn't resized to the proper size. Split the function into seperate functions each handling its task as it should. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-29 12:30:45 -06:00
* Remove L2 padding used to align both header and payload to 4-byte boundary,
* by removing the L2 padding the header will no longer be 4-byte aligned.
rt2x00: Add support for L2 padding during TX/RX Some hardware require L2 padding between header and payload because both must be aligned to a 4-byte boundary. This hardware also is easier during the RX path since we no longer need to move the entire payload but rather only the header to remove the padding (mac80211 only wants the payload to be 4-byte aligned). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-26 08:08:50 -06:00
*/
rt2x00: Reorganize padding & L2 padding The old function rt2x00queue_payload_align() handled both adding and removing L2 padding and some basic frame alignment. The entire function was being abused because it had multiple functions and the header length argument was somtimes used to align the header instead of the payload. Additionally there was a bug when inserting L2 padding that only the payload was aligned but not the header. This happens when the header wasn't aligned properly by mac80211, but rt2x00lib only moves the payload. A secondary problem was that when removing L2 padding during TXdone or RX the skb wasn't resized to the proper size. Split the function into seperate functions each handling its task as it should. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-29 12:30:45 -06:00
void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length);
rt2x00: Add support for L2 padding during TX/RX Some hardware require L2 padding between header and payload because both must be aligned to a 4-byte boundary. This hardware also is easier during the RX path since we no longer need to move the entire payload but rather only the header to remove the padding (mac80211 only wants the payload to be 4-byte aligned). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-26 08:08:50 -06:00
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
/**
* rt2x00queue_write_tx_frame - Write TX frame to hardware
* @queue: Queue over which the frame should be send
* @skb: The skb to send
mac80211: request TX status where needed Right now all frames mac80211 hands to the driver have the IEEE80211_TX_CTL_REQ_TX_STATUS flag set to request TX status. This isn't really necessary, only the injected frames need TX status (the latter for hostapd) so move setting this flag. The rate control algorithms also need TX status, but they don't require it. Also, rt2x00 uses that bit for its own purposes and seems to require it being set for all frames, but that can be fixed in rt2x00. This doesn't really change anything for any drivers but in the future drivers using hw-rate control may opt to not report TX status for frames that don't have the IEEE80211_TX_CTL_REQ_TX_STATUS flag set. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> [rt2x00 bits] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18 17:08:30 -07:00
* @local: frame is not from mac80211
rt2x00: Queue handling overhaul This introduces a big queue handling overhaul, this also renames "ring" to "queues". Move queue handling into rt2x00queue.c and the matching header, use Kerneldoc to improve rt2x00 library documentation. Access to the queues is now protected under a spinlock, this to prevent race conditions which could corrupt the indexing system of the queue. Each queue entry allocates x bytes for driver/device specific data, this cleans up the queue structure significantly and improves code readability. rt2500usb no longer needs 2 entries in the beacon queue to correctly send out the guardian byte. This is now handled in the entry specific structure. rt61 and rt73 now use the correct descriptor size for beacon frames, since this data is written into the registers not the entire TXD descriptor was used but instead of a subset of it named TXINFO. Finally this also fixes numerous other bugs related to incorrect beacon handling or beacon related code. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-05 14:42:23 -07:00
*/
mac80211: request TX status where needed Right now all frames mac80211 hands to the driver have the IEEE80211_TX_CTL_REQ_TX_STATUS flag set to request TX status. This isn't really necessary, only the injected frames need TX status (the latter for hostapd) so move setting this flag. The rate control algorithms also need TX status, but they don't require it. Also, rt2x00 uses that bit for its own purposes and seems to require it being set for all frames, but that can be fixed in rt2x00. This doesn't really change anything for any drivers but in the future drivers using hw-rate control may opt to not report TX status for frames that don't have the IEEE80211_TX_CTL_REQ_TX_STATUS flag set. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> [rt2x00 bits] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18 17:08:30 -07:00
int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
bool local);
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
rt2x00: Reorganize beacon handling With the new beacon handling from mac80211 we can reorganize the beacon handling in rt2x00 as well. This patch will move the function to the TX handlers, and move all duplicate code into rt2x00queue.c. After this change the descriptor helper functions from rt2x00queue.c no longer need to be exported outside of rt2x00lib and can be declared static. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-09 07:12:44 -06:00
/**
rt2x00: Introduce beacon_update_locked that requires caller locking Introduce a beacon_update_locked function that does not acquire the according beacon mutex to allow beacon updates from atomic context. The caller has to take care of synchronization. No functional changes. Just preparation for beacon updates from tasklet context. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-30 05:16:28 -07:00
* rt2x00queue_update_beacon - Send new beacon from mac80211
* to hardware. Handles locking by itself (mutex).
rt2x00: Reorganize beacon handling With the new beacon handling from mac80211 we can reorganize the beacon handling in rt2x00 as well. This patch will move the function to the TX handlers, and move all duplicate code into rt2x00queue.c. After this change the descriptor helper functions from rt2x00queue.c no longer need to be exported outside of rt2x00lib and can be declared static. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-09 07:12:44 -06:00
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @vif: Interface for which the beacon should be updated.
*/
int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
rt2x00: Refactor beacon code to make use of start- and stop_queue This patch allows to dynamically remove beaconing interfaces without shutting beaconing down on all interfaces. The only place to start and stop beaconing are now the start- and stop_queue callbacks. Hence, we can remove some register writes during interface bring up (config_intf) and only write the correct sync mode to the register there. When multiple beaconing interfaces are present we should enable beaconing as soon as mac80211 enables beaconing on at least one of them. The beacon queue gets stopped when the last beaconing interface was stopped by mac80211. Therefore, introduce another interface counter to keep track ot the number of enabled beaconing interfaces and start or stop the beacon queue accordingly. To allow single interfaces to stop beaconing, add a new driver callback clear_beacon to clear a single interface's beacon without affecting the other interfaces. Don't overload the clear_entry callback for clearing beacons as that would introduce additional overhead (check for each TX queue) into the clear_entry callback which is used on the drivers TX/RX hotpaths. Furthermore, the write beacon callback doesn't need to enable beaconing anymore but since beaconing should be disabled while a new beacon is written or cleared we still disable beacon generation and enable it afterwards again in the driver specific callbacks. However, beacon related interrupts should not be disabled/enabled here, that's solely done from the start- and stop queue callbacks. It would be nice to stop the beacon queue just before the beacon update and enable it afterwards in rt2x00queue itself instead of the current implementation that relies on the driver doing the right thing. However, since start- and stop_queue are mutex protected we cannot use them for atomic beacon updates. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-30 05:16:03 -07:00
struct ieee80211_vif *vif);
rt2x00: Introduce beacon_update_locked that requires caller locking Introduce a beacon_update_locked function that does not acquire the according beacon mutex to allow beacon updates from atomic context. The caller has to take care of synchronization. No functional changes. Just preparation for beacon updates from tasklet context. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-30 05:16:28 -07:00
/**
* rt2x00queue_update_beacon_locked - Send new beacon from mac80211
* to hardware. Caller needs to ensure locking.
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @vif: Interface for which the beacon should be updated.
*/
int rt2x00queue_update_beacon_locked(struct rt2x00_dev *rt2x00dev,
struct ieee80211_vif *vif);
rt2x00: Refactor beacon code to make use of start- and stop_queue This patch allows to dynamically remove beaconing interfaces without shutting beaconing down on all interfaces. The only place to start and stop beaconing are now the start- and stop_queue callbacks. Hence, we can remove some register writes during interface bring up (config_intf) and only write the correct sync mode to the register there. When multiple beaconing interfaces are present we should enable beaconing as soon as mac80211 enables beaconing on at least one of them. The beacon queue gets stopped when the last beaconing interface was stopped by mac80211. Therefore, introduce another interface counter to keep track ot the number of enabled beaconing interfaces and start or stop the beacon queue accordingly. To allow single interfaces to stop beaconing, add a new driver callback clear_beacon to clear a single interface's beacon without affecting the other interfaces. Don't overload the clear_entry callback for clearing beacons as that would introduce additional overhead (check for each TX queue) into the clear_entry callback which is used on the drivers TX/RX hotpaths. Furthermore, the write beacon callback doesn't need to enable beaconing anymore but since beaconing should be disabled while a new beacon is written or cleared we still disable beacon generation and enable it afterwards again in the driver specific callbacks. However, beacon related interrupts should not be disabled/enabled here, that's solely done from the start- and stop queue callbacks. It would be nice to stop the beacon queue just before the beacon update and enable it afterwards in rt2x00queue itself instead of the current implementation that relies on the driver doing the right thing. However, since start- and stop_queue are mutex protected we cannot use them for atomic beacon updates. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-30 05:16:03 -07:00
/**
* rt2x00queue_clear_beacon - Clear beacon in hardware
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @vif: Interface for which the beacon should be updated.
*/
int rt2x00queue_clear_beacon(struct rt2x00_dev *rt2x00dev,
struct ieee80211_vif *vif);
rt2x00: Reorganize beacon handling With the new beacon handling from mac80211 we can reorganize the beacon handling in rt2x00 as well. This patch will move the function to the TX handlers, and move all duplicate code into rt2x00queue.c. After this change the descriptor helper functions from rt2x00queue.c no longer need to be exported outside of rt2x00lib and can be declared static. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-09 07:12:44 -06:00
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
/**
* rt2x00queue_index_inc - Index incrementation function
rt2x00: fix queue timeout checks Add a timestamp to each queue entry which is updated whenever the status of the entry changes, and remove the per-queue timestamps. The previous check was incorrect and caused both false positives and false negatives. With the corrected check it comes apparent that the TX status usually times out on rt2800usb unless there is sufficient traffic (i.e. the next TX will complete the previous TX status). Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-18 07:29:38 -06:00
* @entry: Queue entry (&struct queue_entry) to perform the action on.
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
* @index: Index type (&enum queue_index) to perform the action on.
*
rt2x00: fix queue timeout checks Add a timestamp to each queue entry which is updated whenever the status of the entry changes, and remove the per-queue timestamps. The previous check was incorrect and caused both false positives and false negatives. With the corrected check it comes apparent that the TX status usually times out on rt2800usb unless there is sufficient traffic (i.e. the next TX will complete the previous TX status). Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-18 07:29:38 -06:00
* This function will increase the requested index on the entry's queue,
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
* it will grab the appropriate locks and handle queue overflow events by
* resetting the index to the start of the queue.
*/
rt2x00: fix queue timeout checks Add a timestamp to each queue entry which is updated whenever the status of the entry changes, and remove the per-queue timestamps. The previous check was incorrect and caused both false positives and false negatives. With the corrected check it comes apparent that the TX status usually times out on rt2800usb unless there is sufficient traffic (i.e. the next TX will complete the previous TX status). Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-18 07:29:38 -06:00
void rt2x00queue_index_inc(struct queue_entry *entry, enum queue_index index);
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
rt2x00: Cleanup TX/RX entry handling Merge the callback functions init_txentry() and init_rxentry(). This makes life in rt2x00lib a lot simpler and we can cleanup several functions. rt2x00pci contained "fake" FIELD definitions for descriptor words. This is not flexible since it assumes the driver will always have the same field to indicate if a driver is available or not. This should be dependent on the driver, and we should add a callback function for this. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-08 07:25:33 -07:00
/**
* rt2x00queue_init_queues - Initialize all data queues
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* This function will loop through all available queues to clear all
* index numbers and set the queue entry to the correct initialization
* state.
*/
void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev);
rt2x00: Queue handling overhaul This introduces a big queue handling overhaul, this also renames "ring" to "queues". Move queue handling into rt2x00queue.c and the matching header, use Kerneldoc to improve rt2x00 library documentation. Access to the queues is now protected under a spinlock, this to prevent race conditions which could corrupt the indexing system of the queue. Each queue entry allocates x bytes for driver/device specific data, this cleans up the queue structure significantly and improves code readability. rt2500usb no longer needs 2 entries in the beacon queue to correctly send out the guardian byte. This is now handled in the entry specific structure. rt61 and rt73 now use the correct descriptor size for beacon frames, since this data is written into the registers not the entire TXD descriptor was used but instead of a subset of it named TXINFO. Finally this also fixes numerous other bugs related to incorrect beacon handling or beacon related code. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-05 14:42:23 -07:00
int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev);
void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev);
int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev);
void rt2x00queue_free(struct rt2x00_dev *rt2x00dev);
rt2x00: Move link tuning into seperate file Move link and antenna tuning into a seperate file named rt2x00link.c, this makes the interface to the link tuner a lot cleaner. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-20 02:53:29 -07:00
/**
* rt2x00link_update_stats - Update link statistics from RX frame
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @skb: Received frame
* @rxdesc: Received frame descriptor
*
* Update link statistics based on the information from the
* received frame descriptor.
*/
void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
struct rxdone_entry_desc *rxdesc);
/**
* rt2x00link_start_tuner - Start periodic link tuner work
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* This start the link tuner periodic work, this work will
* be executed periodically until &rt2x00link_stop_tuner has
* been called.
*/
void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev);
/**
* rt2x00link_stop_tuner - Stop periodic link tuner work
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* After this function completed the link tuner will not
* be running until &rt2x00link_start_tuner is called.
*/
void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev);
/**
* rt2x00link_reset_tuner - Reset periodic link tuner work
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @antenna: Should the antenna tuning also be reset
*
* The VGC limit configured in the hardware will be reset to 0
* which forces the driver to rediscover the correct value for
* the current association. This is needed when configuration
* options have changed which could drastically change the
* SNR level or link quality (i.e. changing the antenna setting).
*
* Resetting the link tuner will also cause the periodic work counter
* to be reset. Any driver which has a fixed limit on the number
* of rounds the link tuner is supposed to work will accept the
* tuner actions again if this limit was previously reached.
*
* If @antenna is set to true a the software antenna diversity
* tuning will also be reset.
*/
void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna);
/**
rt2x00: Implement watchdog monitoring Implement watchdog monitoring for USB devices (PCI support can be added later). This will determine if URBs being uploaded to the hardware are actually returning. Both rt2500usb and rt2800usb have shown that URBs being uploaded can remain hanging without being released by the hardware. By using this watchdog, a queue can be reset when this occurs. For rt2800usb it has been tested that the connection is preserved even though this interruption. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-11 04:25:46 -06:00
* rt2x00link_start_watchdog - Start periodic watchdog monitoring
rt2x00: Move link tuning into seperate file Move link and antenna tuning into a seperate file named rt2x00link.c, this makes the interface to the link tuner a lot cleaner. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-20 02:53:29 -07:00
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
rt2x00: Implement watchdog monitoring Implement watchdog monitoring for USB devices (PCI support can be added later). This will determine if URBs being uploaded to the hardware are actually returning. Both rt2500usb and rt2800usb have shown that URBs being uploaded can remain hanging without being released by the hardware. By using this watchdog, a queue can be reset when this occurs. For rt2800usb it has been tested that the connection is preserved even though this interruption. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-11 04:25:46 -06:00
* This start the watchdog periodic work, this work will
*be executed periodically until &rt2x00link_stop_watchdog has
* been called.
*/
void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev);
/**
* rt2x00link_stop_watchdog - Stop periodic watchdog monitoring
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* After this function completed the watchdog monitoring will not
* be running until &rt2x00link_start_watchdog is called.
*/
void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev);
rt2x00: Implement tx power temperature compensation rt2800 devices should adjust their tx power in accordance with the eeproms temperature calibration values. Add a new driver callback gain_calibration that is called every 4 seconds. The rt2800 gain calibration routine simply runs the tx power configuration that takes care of calculating the temperature compensation delta. We don't need to synchronize the calls to rt2800_config_txpower as they should all happen from mac80211's single threaded workqueue. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-28 05:33:40 -06:00
/**
* rt2x00link_start_agc - Start periodic gain calibration
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*/
void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev);
rt2x00:Add VCO recalibration Signed-off-by: John Li <chen-yang.li@mediatek.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-16 06:40:57 -07:00
/**
* rt2x00link_start_vcocal - Start periodic VCO calibration
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*/
void rt2x00link_start_vcocal(struct rt2x00_dev *rt2x00dev);
rt2x00: Implement tx power temperature compensation rt2800 devices should adjust their tx power in accordance with the eeproms temperature calibration values. Add a new driver callback gain_calibration that is called every 4 seconds. The rt2800 gain calibration routine simply runs the tx power configuration that takes care of calculating the temperature compensation delta. We don't need to synchronize the calls to rt2800_config_txpower as they should all happen from mac80211's single threaded workqueue. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-28 05:33:40 -06:00
/**
* rt2x00link_stop_agc - Stop periodic gain calibration
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*/
void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev);
rt2x00:Add VCO recalibration Signed-off-by: John Li <chen-yang.li@mediatek.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-16 06:40:57 -07:00
/**
* rt2x00link_stop_vcocal - Stop periodic VCO calibration
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*/
void rt2x00link_stop_vcocal(struct rt2x00_dev *rt2x00dev);
rt2x00: Implement watchdog monitoring Implement watchdog monitoring for USB devices (PCI support can be added later). This will determine if URBs being uploaded to the hardware are actually returning. Both rt2500usb and rt2800usb have shown that URBs being uploaded can remain hanging without being released by the hardware. By using this watchdog, a queue can be reset when this occurs. For rt2800usb it has been tested that the connection is preserved even though this interruption. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-11 04:25:46 -06:00
/**
* rt2x00link_register - Initialize link tuning & watchdog functionality
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* Initialize work structure and all link tuning and watchdog related
* parameters. This will not start the periodic work itself.
rt2x00: Move link tuning into seperate file Move link and antenna tuning into a seperate file named rt2x00link.c, this makes the interface to the link tuner a lot cleaner. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-20 02:53:29 -07:00
*/
void rt2x00link_register(struct rt2x00_dev *rt2x00dev);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
/*
* Firmware handlers.
*/
#ifdef CONFIG_RT2X00_LIB_FIRMWARE
int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev);
#else
static inline int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev)
{
return 0;
}
static inline void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev)
{
}
#endif /* CONFIG_RT2X00_LIB_FIRMWARE */
/*
* Debugfs handlers.
*/
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
void rt2x00debug_register(struct rt2x00_dev *rt2x00dev);
void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev);
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
rt2x00: Move link tuning into seperate file Move link and antenna tuning into a seperate file named rt2x00link.c, this makes the interface to the link tuner a lot cleaner. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-20 02:53:29 -07:00
struct rxdone_entry_desc *rxdesc);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
#else
static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
{
}
static inline void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
{
}
rt2x00: Add TX/RX frame dumping facility This adds TX/RX frame dumping capabilities through debugfs. The intention is that with this approach debugging of rt2x00 is simplified since _all_ frames going in and out of the device are send to debugfs as well along with additional information like the hardware descriptor. Based on the patch by Mattias Nissler. Mattias also has some tools that will make the dumped frames available to wireshark: http://www-user.rhrk.uni-kl.de/~nissler/rt2x00/ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-27 13:49:29 -07:00
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
rt2x00: Move link tuning into seperate file Move link and antenna tuning into a seperate file named rt2x00link.c, this makes the interface to the link tuner a lot cleaner. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-20 02:53:29 -07:00
struct rxdone_entry_desc *rxdesc)
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
{
}
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
/*
* Crypto handlers.
*/
#ifdef CONFIG_RT2X00_LIB_CRYPTO
enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key);
rt2x00: Don't use queue entry as parameter when creating TX descriptor. The functions that create the tx descriptor structure do not operate on a queue entry at all. Signal this fact in the code by not providing a queue entry as a parameter, but the rt2x00 device structure and the skb directly. This patch is a preparation for reducing the time a queue is locked for a tx operation. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-06 14:57:00 -06:00
void rt2x00crypto_create_tx_descriptor(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
rt2x00: Move crypto TX descriptor handling to rt2x00crypto.c Move all code which determines the right TX descriptor fields specific to crypto support into rt2x00crypto.c. This makes the code in rt2x00queue more simpler and better concentrates all crypto code into a single location. With this we can also remove some ifdefs in rt2x00queue.c since the code inside the ifdef is either very small, or only calling empty functions (see empty function definitions in rt2x00lib.h). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-03 09:29:48 -07:00
struct txentry_desc *txdesc);
rt2x00: Move code into seperate functions Some functions have grown rapidly in size over the last time, some of those functions (like the rt2x00queue_create_tx_descriptor) will further increase in size soon, so it is best to start cutting it into logical pieces. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-20 02:58:33 -07:00
unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb);
rt2x00: Move iv_len into tx descriptor data By placing the iv_len into the tx descriptor data and by passing this data to the crypto IV handlers we can save multiple calls to ieee80211_get_hdrlen_from_skb() and some if-statements when copying/removing the IV data from the outgoing frame. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-26 08:08:30 -06:00
void rt2x00crypto_tx_copy_iv(struct sk_buff *skb,
struct txentry_desc *txdesc);
void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
struct txentry_desc *txdesc);
rt2x00: Add support for L2 padding during TX/RX Some hardware require L2 padding between header and payload because both must be aligned to a 4-byte boundary. This hardware also is easier during the RX path since we no longer need to move the entire payload but rather only the header to remove the padding (mac80211 only wants the payload to be 4-byte aligned). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-26 08:08:50 -06:00
void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length);
rt2x00: Reorganize padding & L2 padding The old function rt2x00queue_payload_align() handled both adding and removing L2 padding and some basic frame alignment. The entire function was being abused because it had multiple functions and the header length argument was somtimes used to align the header instead of the payload. Additionally there was a bug when inserting L2 padding that only the payload was aligned but not the header. This happens when the header wasn't aligned properly by mac80211, but rt2x00lib only moves the payload. A secondary problem was that when removing L2 padding during TXdone or RX the skb wasn't resized to the proper size. Split the function into seperate functions each handling its task as it should. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-29 12:30:45 -06:00
void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
unsigned int header_length,
struct rxdone_entry_desc *rxdesc);
#else
static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
{
return CIPHER_NONE;
}
rt2x00: Fix compilation without CONFIG_RT2X00_LIB_CRYPTO This was introduced by commit 77b5621bac4a56b83b9081f48d4e7d1accdde400 (rt2x00: Don't use queue entry as parameter when creating TX descriptor.) Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-02 03:43:14 -06:00
static inline void rt2x00crypto_create_tx_descriptor(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
rt2x00: Move crypto TX descriptor handling to rt2x00crypto.c Move all code which determines the right TX descriptor fields specific to crypto support into rt2x00crypto.c. This makes the code in rt2x00queue more simpler and better concentrates all crypto code into a single location. With this we can also remove some ifdefs in rt2x00queue.c since the code inside the ifdef is either very small, or only calling empty functions (see empty function definitions in rt2x00lib.h). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-03 09:29:48 -07:00
struct txentry_desc *txdesc)
{
}
rt2x00: Move code into seperate functions Some functions have grown rapidly in size over the last time, some of those functions (like the rt2x00queue_create_tx_descriptor) will further increase in size soon, so it is best to start cutting it into logical pieces. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-20 02:58:33 -07:00
static inline unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb)
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
{
return 0;
}
rt2x00: Implement HW encryption (rt2500usb) rt2500usb supports hardware encryption. rt2500usb supports up to 4 shared and pairwise keys. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-02 10:20:42 -07:00
static inline void rt2x00crypto_tx_copy_iv(struct sk_buff *skb,
rt2x00: Move iv_len into tx descriptor data By placing the iv_len into the tx descriptor data and by passing this data to the crypto IV handlers we can save multiple calls to ieee80211_get_hdrlen_from_skb() and some if-statements when copying/removing the IV data from the outgoing frame. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-26 08:08:30 -06:00
struct txentry_desc *txdesc)
rt2x00: Implement HW encryption (rt2500usb) rt2500usb supports hardware encryption. rt2500usb supports up to 4 shared and pairwise keys. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-02 10:20:42 -07:00
{
}
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
rt2x00: Move iv_len into tx descriptor data By placing the iv_len into the tx descriptor data and by passing this data to the crypto IV handlers we can save multiple calls to ieee80211_get_hdrlen_from_skb() and some if-statements when copying/removing the IV data from the outgoing frame. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-26 08:08:30 -06:00
struct txentry_desc *txdesc)
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
{
}
rt2x00: Add support for L2 padding during TX/RX Some hardware require L2 padding between header and payload because both must be aligned to a 4-byte boundary. This hardware also is easier during the RX path since we no longer need to move the entire payload but rather only the header to remove the padding (mac80211 only wants the payload to be 4-byte aligned). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-26 08:08:50 -06:00
static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb,
unsigned int header_length)
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
{
}
rt2x00: fix the definition of rt2x00crypto_rx_insert_iv Remove the redundant l2pad parameter from the definition of rt2x00crypto_rx_insert_iv which is used when only CONFIG_RT2500PCI but none of the other rt2x00 family drivers is configured. Signed-off-by: Andrew Price <andy@andrewprice.me.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-17 14:15:48 -06:00
static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
unsigned int header_length,
struct rxdone_entry_desc *rxdesc)
{
}
rt2x00: Move crypto TX descriptor handling to rt2x00crypto.c Move all code which determines the right TX descriptor fields specific to crypto support into rt2x00crypto.c. This makes the code in rt2x00queue more simpler and better concentrates all crypto code into a single location. With this we can also remove some ifdefs in rt2x00queue.c since the code inside the ifdef is either very small, or only calling empty functions (see empty function definitions in rt2x00lib.h). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-03 09:29:48 -07:00
#endif /* CONFIG_RT2X00_LIB_CRYPTO */
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
/*
* RFkill handlers.
*/
rt2x00: Add suspend/resume handlers to rt2x00rfkill Add suspend/resume handlers to rt2x00rfkill to have it stop the input-polldev and prevent it from calling rt2x00 during suspend period. This could lead to a NULL pointer fault when rt2x00 suspended, but polldev send a request, because the csr_addr is NULL. Also don't let the rfkill allocation/registration block the initialization of the entire device. Just print a warning and continue as if nothing happened. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13 08:38:03 -06:00
static inline void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
{
rt2x00: Split rt2x00dev->flags The number of flags defined for the rt2x00dev->flags field, has been growing over the years. Currently we are approaching the maximum number of bits which are available in the field. A secondary problem, is that one part of the field are initialized only during boot, because the driver requirements are initialized or device requirements are loaded from the EEPROM. In both cases, the flags are fixed and will not change during device operation. The other flags are the device state, and will change frequently. So far this resulted in the fact that for some flags, the atomic bit accessors are used, while for the others the non-atomic variants are used. By splitting the flags up into a "flags" and "cap_flags" we can put all flags which are fixed inside "cap_flags". This field can then be read non-atomically. In the "flags" field we keep the device state, which is going to be read atomically. This adds more room for more flags in the future, and sanitizes the field access methods. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-18 07:27:06 -06:00
if (test_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags))
rt2x00: use wiphy rfkill interface Remove the input_polldev from rt2x00 and replace it with the rfkill interface offered by the wiphy structure. This simplifies the entire rfkill handling in rt2x00 and allows us to remove the CONFIG_RT2X00_LIB_RFKILL option and always enables rfkill capabilities. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 07:17:35 -06:00
wiphy_rfkill_start_polling(rt2x00dev->hw->wiphy);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
}
static inline void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
{
rt2x00: Split rt2x00dev->flags The number of flags defined for the rt2x00dev->flags field, has been growing over the years. Currently we are approaching the maximum number of bits which are available in the field. A secondary problem, is that one part of the field are initialized only during boot, because the driver requirements are initialized or device requirements are loaded from the EEPROM. In both cases, the flags are fixed and will not change during device operation. The other flags are the device state, and will change frequently. So far this resulted in the fact that for some flags, the atomic bit accessors are used, while for the others the non-atomic variants are used. By splitting the flags up into a "flags" and "cap_flags" we can put all flags which are fixed inside "cap_flags". This field can then be read non-atomically. In the "flags" field we keep the device state, which is going to be read atomically. This adds more room for more flags in the future, and sanitizes the field access methods. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-18 07:27:06 -06:00
if (test_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags))
rt2x00: use wiphy rfkill interface Remove the input_polldev from rt2x00 and replace it with the rfkill interface offered by the wiphy structure. This simplifies the entire rfkill handling in rt2x00 and allows us to remove the CONFIG_RT2X00_LIB_RFKILL option and always enables rfkill capabilities. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 07:17:35 -06:00
wiphy_rfkill_stop_polling(rt2x00dev->hw->wiphy);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
}
rt2x00: Make use of MAC80211_LED_TRIGGERS Make use of the led triggers provided by mac80211 to control the led status. This can be enabled through a per-driver configuration option which will automatically enable the generic handler in rt2x00lib. This has been enabled for rt2500usb and rt73usb for the moment since the led class will call set_brightness in irq context which will not work correctly with the usb drivers who need to sleep. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:53:40 -07:00
/*
* LED handlers
*/
#ifdef CONFIG_RT2X00_LIB_LEDS
void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, int rssi);
rt2x00: Fix quality/activity led handling There was an obvious typo in LED structure initialization which caused the radio and quality/activity leds to be incorrectly initialized which resulted in the leds not being enabled. Additionally add the rt2x00led_led_activity() handler that will enable TX/RX activity leds when the radio is being enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-21 11:01:09 -06:00
void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, bool enabled);
rt2x00: Remove MAC80211_LEDS dependency Implement triggers inside rt2x00 itself based on input from mac80211. This replaces the method of using the mac80211 trigger events which do not work for USB drivers due to the scheduling requirement. After this patch RT2500USB_LEDS and RT73USB_LEDS no longer need to be tagged as broken since they now support LED handling again without having to check for in_atomic(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-31 07:53:44 -06:00
void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled);
void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled);
rt2x00: Make rt2x00leds_register return void rt2x00dev isn't interested in the rt2x00leds_register() value anyway. So lets make it return void to even prevent people from assuming there is anybody interested in the returnvalue. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 15:47:08 -06:00
void rt2x00leds_register(struct rt2x00_dev *rt2x00dev);
rt2x00: Make use of MAC80211_LED_TRIGGERS Make use of the led triggers provided by mac80211 to control the led status. This can be enabled through a per-driver configuration option which will automatically enable the generic handler in rt2x00lib. This has been enabled for rt2500usb and rt73usb for the moment since the led class will call set_brightness in irq context which will not work correctly with the usb drivers who need to sleep. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:53:40 -07:00
void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev);
void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev);
void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev);
#else
static inline void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev,
int rssi)
{
}
rt2x00: Fix quality/activity led handling There was an obvious typo in LED structure initialization which caused the radio and quality/activity leds to be incorrectly initialized which resulted in the leds not being enabled. Additionally add the rt2x00led_led_activity() handler that will enable TX/RX activity leds when the radio is being enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-21 11:01:09 -06:00
static inline void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev,
bool enabled)
{
}
rt2x00: Remove MAC80211_LEDS dependency Implement triggers inside rt2x00 itself based on input from mac80211. This replaces the method of using the mac80211 trigger events which do not work for USB drivers due to the scheduling requirement. After this patch RT2500USB_LEDS and RT73USB_LEDS no longer need to be tagged as broken since they now support LED handling again without having to check for in_atomic(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-31 07:53:44 -06:00
static inline void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev,
bool enabled)
{
}
static inline void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev,
bool enabled)
{
}
rt2x00: Make rt2x00leds_register return void rt2x00dev isn't interested in the rt2x00leds_register() value anyway. So lets make it return void to even prevent people from assuming there is anybody interested in the returnvalue. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 15:47:08 -06:00
static inline void rt2x00leds_register(struct rt2x00_dev *rt2x00dev)
rt2x00: Make use of MAC80211_LED_TRIGGERS Make use of the led triggers provided by mac80211 to control the led status. This can be enabled through a per-driver configuration option which will automatically enable the generic handler in rt2x00lib. This has been enabled for rt2500usb and rt73usb for the moment since the led class will call set_brightness in irq context which will not work correctly with the usb drivers who need to sleep. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:53:40 -07:00
{
}
static inline void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev)
{
}
static inline void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev)
{
}
static inline void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev)
{
}
#endif /* CONFIG_RT2X00_LIB_LEDS */
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
#endif /* RT2X00LIB_H */
Reference in a new issue Copy permalink