Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/net/wireless/rt2x00/rt2x00lib.h

338 lines
9.3 KiB
C
Raw Normal View History

[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
/*
rt2x00: Update copyright notice Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:42:53 -07:00
Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00lib
Abstract: Data structures and definitions for the rt2x00lib module.
*/
#ifndef RT2X00LIB_H
#define RT2X00LIB_H
rt2x00: trim skb_frame_desc to 32 bytes Remove frame_type from skb_frame_desc and pass it as argument to rt2x00debug_dump_frame(). Change data_len and desc_len to unsigned short to save another 4 bytes in skb_frame_desc. Note that this was the only location where the data_len and desc_len was not yet treated as unsigned short. This trim is required to help mac80211 with adding the TX control and TX status informtation into the skb->cb structure. When that happens, drivers will have approximately 40 bytes left to use freely. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-10 05:41:32 -06:00
#include "rt2x00dump.h"
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
/*
* Interval defines
[PATCH] rt2x00: Fix rfkill handling As reported by Modestas Vainius, enabling rkfill in 1 driver and disabling it in a second could cause a NULL pointer exception when the rfkill-disabled driver still sets the CONFIG_SUPPORT_HW_BUTTON flag. Furthermore, rfkill expects the timeout as a value in milliseconds instead of jiffies. Also increase the timeout to a second, since this 250ms would be overkill. Also the flag DEVICE_ENABLED_RADIO_HW is causing problems for devices which do not support the hardware button while rfkill is enabled in the driver. To remidy this we should inverse the flag and its meaning, rename the flag to DEVICE_DISABLED_RADIO_HW this means that by default the radio is enabled by the hardware button (if present) and can only be disabled explicitely. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-06 06:14:06 -06:00
* Both the link tuner as the rfkill will be called once per second.
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
*/
[PATCH] rt2x00: jiffies_round -> jiffies_round_relative When rounding a relative timeout we need to use round_jiffies_relative(). Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-14 23:40:34 -06:00
#define LINK_TUNE_INTERVAL ( round_jiffies_relative(HZ) )
rt2x00: Remove input_polldev requirements for rfkill With the new rfkill interface there is no longer a need for the input_polldev. Create a delayed_work structure which we can put on the mac80211 workqueue and poll the hardware every 1000ms. v2: Decrease poll frequency from 100ms to 1000ms Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-04 06:51:39 -06:00
#define RFKILL_POLL_INTERVAL ( round_jiffies_relative(HZ) )
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
rt2x00: Rate structure overhaul Recent changes to the rate structure registration broke rt2x00, the hw_value was reduced from 32bits to 16bits while rt2x00 used the full 32bits. However the way rt2x00 used the value was inflexible and needed to be changed anyway. This patch creates a array containing information for each rate, the hw_value passed to mac80211 is the index value for that array including a field to indicate if short preamble should be enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:50:40 -07:00
/*
* rt2x00_rate: Per rate device information
*/
struct rt2x00_rate {
unsigned short flags;
rt2x00: Cleanup mode registration Don't wildly pass any number for num_rates to rt2x00lib, instead pass which type of rates are supported (CCK, OFDM). Same for num_modes but then for the 2GHZ and 5GHZ band. This makes the interface look much nicer and makes extending it later easier. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-17 09:35:05 -07:00
#define DEV_RATE_CCK 0x0001
#define DEV_RATE_OFDM 0x0002
#define DEV_RATE_SHORT_PREAMBLE 0x0004
rt2x00: Rate structure overhaul Recent changes to the rate structure registration broke rt2x00, the hw_value was reduced from 32bits to 16bits while rt2x00 used the full 32bits. However the way rt2x00 used the value was inflexible and needed to be changed anyway. This patch creates a array containing information for each rate, the hw_value passed to mac80211 is the index value for that array including a field to indicate if short preamble should be enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:50:40 -07:00
unsigned short bitrate; /* In 100kbit/s */
unsigned short ratemask;
unsigned short plcp;
};
extern const struct rt2x00_rate rt2x00_supported_rates[12];
static inline u16 rt2x00_create_rate_hw_value(const u16 index,
const u16 short_preamble)
{
return (short_preamble << 8) | (index & 0xff);
}
static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value)
{
return &rt2x00_supported_rates[hw_value & 0xff];
}
static inline int rt2x00_get_rate_preamble(const u16 hw_value)
{
return (hw_value & 0xff00);
}
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
/*
* Radio control handlers.
*/
int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev);
[PATCH] rt2x00: Pass dev_state to rt2x00lib_toggle_rx Directly pass a value from the enum dev_state with rt2x00lib_toggle_rx, this will save us a ? : statement, and it is clearer then passing a 1 0 argument. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-06 06:16:09 -06:00
void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev);
/*
* Initialization handlers.
*/
rt2x00: Move start() and stop() handlers into rt2x00lib.c suspend & resume was broken since it called rt2x00mac_start() and rt2x00mac_stop() which would fail to execute because the DEVICE_PRESENT flag was not set. Move the start and stop handlers into rt2x00lib.c which are called from rt2x00mac_start() and rt2x00mac_stop() after they have checked the DEVICE_PRESENT flag, while suspend and resume handlers can directly call those functions. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-06 15:40:07 -07:00
int rt2x00lib_start(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
/*
* Configuration handlers.
*/
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:49:59 -07:00
void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
mac80211: use nl80211 interface types There's really no reason for mac80211 to be using its own interface type defines. Use the nl80211 types and simplify the configuration code a bit: there's no need to translate them any more now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 16:01:58 -06:00
enum nl80211_iftype type,
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:49:59 -07:00
u8 *mac, u8 *bssid);
rt2x00: Rename config_preamble() to config_erp() Rename config_preamble() to config_erp() and cleanup argument list by putting it all into a single structure. This will make the function more meaningful and easier to expand later. This second option is mostly intended to make the patch "mac80211: proper short-slot handling" from Johannes Berg easier to apply for rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 15:46:18 -06:00
void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
struct ieee80211_bss_conf *conf);
[PATCH] rt2x00: Implement SW diversity When mac80211 indicates that the default antenna setup should be used _and_ that this default setup is SW_DIVERSITY. This requires sampling and storing the RSSI per antenna and check once every 2 seconds to determine if the RSSI has changed significantly. Once this is the case we should sample the other antenna for a short period and evaluate if we need to swap antenna or not. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 08:26:36 -06:00
void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
rt2x00: Fix BUG_ON() with antenna handling With the new configuration handling, and more specifically splitting the configuration of the antenna from the normal configuration steps allowed a BUG_ON() to be triggered in the driver because the SW_DIVERSITY was send to the driver. This fixes that by catching the value early in rt2x00config.c and replacing it with a sensible value. This also fixes a problem where the antenna is not being initialized at all when the radio is enabled. Since it no longer is part of the mac80211 configuration the only place where rt2x00 configured it was the SW diversity handler. Obviously this is broken for all non-diversity hardware and breaks SW diversity due to a broken initialization. When the radio is enabled the antenna will be configured once as soon as the config() callback function is called. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-01 17:38:10 -06:00
struct antenna_setup *ant);
[PATCH] rt2x00: Reorganize rt2x00dev->flags The rt2x00dev->flags has become a chaos over time, this will reorganize the flags by renaming, deleting, adding and properly implement the flags. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-25 12:55:39 -06:00
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
rt2x00: Optimize configuration handling Implement latest changed from mac80211 configuration handling to optmize configuration handling in rt2x00. * Remove set_retry_limit callback function, handled through config() * Move config_antenna to its own callback function, it isn't handled by mac80211 anymore * Use IEEE80211_CONF_CHANGED_* flags and remove manual checks * Removed deprecated short slot setting through config() and put it in config_erp() through which mac80211 now configures it * Remove config_phymode() and move contents to config_erp() since it only managed the basic rates which is now determined by mac80211 through config_erp(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-29 10:17:57 -06:00
struct ieee80211_conf *conf,
const unsigned int changed_flags);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
/**
* DOC: Queue handlers
*/
/**
* rt2x00queue_alloc_rxskb - allocate a skb for RX purposes.
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @queue: The queue for which the skb will be applicable.
*/
struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev,
struct queue_entry *entry);
/**
* rt2x00queue_unmap_skb - Unmap a skb from DMA.
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @skb: The skb to unmap.
*/
void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
/**
* rt2x00queue_free_skb - free a skb
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @skb: The skb to free.
*/
void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
/**
* rt2x00queue_write_tx_frame - Write TX frame to hardware
* @queue: Queue over which the frame should be send
* @skb: The skb to send
rt2x00: Queue handling overhaul This introduces a big queue handling overhaul, this also renames "ring" to "queues". Move queue handling into rt2x00queue.c and the matching header, use Kerneldoc to improve rt2x00 library documentation. Access to the queues is now protected under a spinlock, this to prevent race conditions which could corrupt the indexing system of the queue. Each queue entry allocates x bytes for driver/device specific data, this cleans up the queue structure significantly and improves code readability. rt2500usb no longer needs 2 entries in the beacon queue to correctly send out the guardian byte. This is now handled in the entry specific structure. rt61 and rt73 now use the correct descriptor size for beacon frames, since this data is written into the registers not the entire TXD descriptor was used but instead of a subset of it named TXINFO. Finally this also fixes numerous other bugs related to incorrect beacon handling or beacon related code. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-05 14:42:23 -07:00
*/
rt2x00: Move generic TX frame writing code into rt2x00queue The write_tx_data functions in rt2x00pci and rt2x00usb have a lot in common. This moves that duplicate code into rt2x00queue_write_tx_frame(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-06 14:50:28 -06:00
int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb);
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
rt2x00: Reorganize beacon handling With the new beacon handling from mac80211 we can reorganize the beacon handling in rt2x00 as well. This patch will move the function to the TX handlers, and move all duplicate code into rt2x00queue.c. After this change the descriptor helper functions from rt2x00queue.c no longer need to be exported outside of rt2x00lib and can be declared static. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-09 07:12:44 -06:00
/**
* rt2x00queue_update_beacon - Send new beacon from mac80211 to hardware
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @vif: Interface for which the beacon should be updated.
*/
int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
struct ieee80211_vif *vif);
rt2x00: Cleanup symbol exports With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16 11:56:54 -06:00
/**
* rt2x00queue_index_inc - Index incrementation function
* @queue: Queue (&struct data_queue) to perform the action on.
* @index: Index type (&enum queue_index) to perform the action on.
*
* This function will increase the requested index on the queue,
* it will grab the appropriate locks and handle queue overflow events by
* resetting the index to the start of the queue.
*/
void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index);
rt2x00: Cleanup TX/RX entry handling Merge the callback functions init_txentry() and init_rxentry(). This makes life in rt2x00lib a lot simpler and we can cleanup several functions. rt2x00pci contained "fake" FIELD definitions for descriptor words. This is not flexible since it assumes the driver will always have the same field to indicate if a driver is available or not. This should be dependent on the driver, and we should add a callback function for this. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-08 07:25:33 -07:00
/**
* rt2x00queue_init_queues - Initialize all data queues
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* This function will loop through all available queues to clear all
* index numbers and set the queue entry to the correct initialization
* state.
*/
void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev);
rt2x00: Queue handling overhaul This introduces a big queue handling overhaul, this also renames "ring" to "queues". Move queue handling into rt2x00queue.c and the matching header, use Kerneldoc to improve rt2x00 library documentation. Access to the queues is now protected under a spinlock, this to prevent race conditions which could corrupt the indexing system of the queue. Each queue entry allocates x bytes for driver/device specific data, this cleans up the queue structure significantly and improves code readability. rt2500usb no longer needs 2 entries in the beacon queue to correctly send out the guardian byte. This is now handled in the entry specific structure. rt61 and rt73 now use the correct descriptor size for beacon frames, since this data is written into the registers not the entire TXD descriptor was used but instead of a subset of it named TXINFO. Finally this also fixes numerous other bugs related to incorrect beacon handling or beacon related code. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-05 14:42:23 -07:00
int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev);
void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev);
int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev);
void rt2x00queue_free(struct rt2x00_dev *rt2x00dev);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
/*
* Firmware handlers.
*/
#ifdef CONFIG_RT2X00_LIB_FIRMWARE
int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev);
#else
static inline int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev)
{
return 0;
}
static inline void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev)
{
}
#endif /* CONFIG_RT2X00_LIB_FIRMWARE */
/*
* Debugfs handlers.
*/
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
void rt2x00debug_register(struct rt2x00_dev *rt2x00dev);
void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev);
rt2x00: trim skb_frame_desc to 32 bytes Remove frame_type from skb_frame_desc and pass it as argument to rt2x00debug_dump_frame(). Change data_len and desc_len to unsigned short to save another 4 bytes in skb_frame_desc. Note that this was the only location where the data_len and desc_len was not yet treated as unsigned short. This trim is required to help mac80211 with adding the TX control and TX status informtation into the skb->cb structure. When that happens, drivers will have approximately 40 bytes left to use freely. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-10 05:41:32 -06:00
void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
enum rt2x00_dump_type type, struct sk_buff *skb);
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
enum cipher cipher, enum rx_crypto status);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
#else
static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
{
}
static inline void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
{
}
rt2x00: Add TX/RX frame dumping facility This adds TX/RX frame dumping capabilities through debugfs. The intention is that with this approach debugging of rt2x00 is simplified since _all_ frames going in and out of the device are send to debugfs as well along with additional information like the hardware descriptor. Based on the patch by Mattias Nissler. Mattias also has some tools that will make the dumped frames available to wireshark: http://www-user.rhrk.uni-kl.de/~nissler/rt2x00/ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-27 13:49:29 -07:00
static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
rt2x00: trim skb_frame_desc to 32 bytes Remove frame_type from skb_frame_desc and pass it as argument to rt2x00debug_dump_frame(). Change data_len and desc_len to unsigned short to save another 4 bytes in skb_frame_desc. Note that this was the only location where the data_len and desc_len was not yet treated as unsigned short. This trim is required to help mac80211 with adding the TX control and TX status informtation into the skb->cb structure. When that happens, drivers will have approximately 40 bytes left to use freely. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-10 05:41:32 -06:00
enum rt2x00_dump_type type,
rt2x00: correct "skb_buff" typo Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04 15:24:35 -07:00
struct sk_buff *skb)
rt2x00: Add TX/RX frame dumping facility This adds TX/RX frame dumping capabilities through debugfs. The intention is that with this approach debugging of rt2x00 is simplified since _all_ frames going in and out of the device are send to debugfs as well along with additional information like the hardware descriptor. Based on the patch by Mattias Nissler. Mattias also has some tools that will make the dumped frames available to wireshark: http://www-user.rhrk.uni-kl.de/~nissler/rt2x00/ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-27 13:49:29 -07:00
{
}
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
enum cipher cipher,
enum rx_crypto status)
{
}
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
/*
* Crypto handlers.
*/
#ifdef CONFIG_RT2X00_LIB_CRYPTO
enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key);
unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info);
rt2x00: Implement HW encryption (rt2500usb) rt2500usb supports hardware encryption. rt2500usb supports up to 4 shared and pairwise keys. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-02 10:20:42 -07:00
void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, unsigned int iv_len);
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len);
void rt2x00crypto_tx_insert_iv(struct sk_buff *skb);
void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
unsigned int header_length,
struct rxdone_entry_desc *rxdesc);
#else
static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
{
return CIPHER_NONE;
}
static inline unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info)
{
return 0;
}
rt2x00: Implement HW encryption (rt2500usb) rt2500usb supports hardware encryption. rt2500usb supports up to 4 shared and pairwise keys. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-02 10:20:42 -07:00
static inline void rt2x00crypto_tx_copy_iv(struct sk_buff *skb,
unsigned int iv_len)
{
}
rt2x00: Implement HW encryption Various rt2x00 devices support hardware encryption. Most of them require the IV/EIV to be generated by mac80211, but require it to be provided seperately instead of within the frame itself. This means that rt2x00lib should extract the data from the frame and place it in the frame descriptor. During RX the IV/EIV is provided in the descriptor by the hardware which means that it should be inserted into the frame by rt2x00lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 08:37:44 -06:00
static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
unsigned int iv_len)
{
}
static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
{
}
static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
unsigned int align,
unsigned int header_length,
struct rxdone_entry_desc *rxdesc)
{
}
#endif
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
/*
* RFkill handlers.
*/
#ifdef CONFIG_RT2X00_LIB_RFKILL
rt2x00: Add suspend/resume handlers to rt2x00rfkill Add suspend/resume handlers to rt2x00rfkill to have it stop the input-polldev and prevent it from calling rt2x00 during suspend period. This could lead to a NULL pointer fault when rt2x00 suspended, but polldev send a request, because the csr_addr is NULL. Also don't let the rfkill allocation/registration block the initialization of the entire device. Just print a warning and continue as if nothing happened. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13 08:38:03 -06:00
void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev);
rt2x00: Add suspend/resume handlers to rt2x00rfkill Add suspend/resume handlers to rt2x00rfkill to have it stop the input-polldev and prevent it from calling rt2x00 during suspend period. This could lead to a NULL pointer fault when rt2x00 suspended, but polldev send a request, because the csr_addr is NULL. Also don't let the rfkill allocation/registration block the initialization of the entire device. Just print a warning and continue as if nothing happened. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13 08:38:03 -06:00
void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev);
#else
rt2x00: Add suspend/resume handlers to rt2x00rfkill Add suspend/resume handlers to rt2x00rfkill to have it stop the input-polldev and prevent it from calling rt2x00 during suspend period. This could lead to a NULL pointer fault when rt2x00 suspended, but polldev send a request, because the csr_addr is NULL. Also don't let the rfkill allocation/registration block the initialization of the entire device. Just print a warning and continue as if nothing happened. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13 08:38:03 -06:00
static inline void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
{
}
static inline void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
{
}
rt2x00: Add suspend/resume handlers to rt2x00rfkill Add suspend/resume handlers to rt2x00rfkill to have it stop the input-polldev and prevent it from calling rt2x00 during suspend period. This could lead to a NULL pointer fault when rt2x00 suspended, but polldev send a request, because the csr_addr is NULL. Also don't let the rfkill allocation/registration block the initialization of the entire device. Just print a warning and continue as if nothing happened. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-13 08:38:03 -06:00
static inline void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
{
}
static inline void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
{
}
#endif /* CONFIG_RT2X00_LIB_RFKILL */
rt2x00: Make use of MAC80211_LED_TRIGGERS Make use of the led triggers provided by mac80211 to control the led status. This can be enabled through a per-driver configuration option which will automatically enable the generic handler in rt2x00lib. This has been enabled for rt2500usb and rt73usb for the moment since the led class will call set_brightness in irq context which will not work correctly with the usb drivers who need to sleep. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:53:40 -07:00
/*
* LED handlers
*/
#ifdef CONFIG_RT2X00_LIB_LEDS
void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, int rssi);
rt2x00: Fix quality/activity led handling There was an obvious typo in LED structure initialization which caused the radio and quality/activity leds to be incorrectly initialized which resulted in the leds not being enabled. Additionally add the rt2x00led_led_activity() handler that will enable TX/RX activity leds when the radio is being enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-21 11:01:09 -06:00
void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, bool enabled);
rt2x00: Remove MAC80211_LEDS dependency Implement triggers inside rt2x00 itself based on input from mac80211. This replaces the method of using the mac80211 trigger events which do not work for USB drivers due to the scheduling requirement. After this patch RT2500USB_LEDS and RT73USB_LEDS no longer need to be tagged as broken since they now support LED handling again without having to check for in_atomic(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-31 07:53:44 -06:00
void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled);
void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled);
rt2x00: Make rt2x00leds_register return void rt2x00dev isn't interested in the rt2x00leds_register() value anyway. So lets make it return void to even prevent people from assuming there is anybody interested in the returnvalue. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 15:47:08 -06:00
void rt2x00leds_register(struct rt2x00_dev *rt2x00dev);
rt2x00: Make use of MAC80211_LED_TRIGGERS Make use of the led triggers provided by mac80211 to control the led status. This can be enabled through a per-driver configuration option which will automatically enable the generic handler in rt2x00lib. This has been enabled for rt2500usb and rt73usb for the moment since the led class will call set_brightness in irq context which will not work correctly with the usb drivers who need to sleep. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:53:40 -07:00
void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev);
void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev);
void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev);
#else
static inline void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev,
int rssi)
{
}
rt2x00: Fix quality/activity led handling There was an obvious typo in LED structure initialization which caused the radio and quality/activity leds to be incorrectly initialized which resulted in the leds not being enabled. Additionally add the rt2x00led_led_activity() handler that will enable TX/RX activity leds when the radio is being enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-21 11:01:09 -06:00
static inline void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev,
bool enabled)
{
}
rt2x00: Remove MAC80211_LEDS dependency Implement triggers inside rt2x00 itself based on input from mac80211. This replaces the method of using the mac80211 trigger events which do not work for USB drivers due to the scheduling requirement. After this patch RT2500USB_LEDS and RT73USB_LEDS no longer need to be tagged as broken since they now support LED handling again without having to check for in_atomic(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-31 07:53:44 -06:00
static inline void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev,
bool enabled)
{
}
static inline void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev,
bool enabled)
{
}
rt2x00: Make rt2x00leds_register return void rt2x00dev isn't interested in the rt2x00leds_register() value anyway. So lets make it return void to even prevent people from assuming there is anybody interested in the returnvalue. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 15:47:08 -06:00
static inline void rt2x00leds_register(struct rt2x00_dev *rt2x00dev)
rt2x00: Make use of MAC80211_LED_TRIGGERS Make use of the led triggers provided by mac80211 to control the led status. This can be enabled through a per-driver configuration option which will automatically enable the generic handler in rt2x00lib. This has been enabled for rt2500usb and rt73usb for the moment since the led class will call set_brightness in irq context which will not work correctly with the usb drivers who need to sleep. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 07:53:40 -07:00
{
}
static inline void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev)
{
}
static inline void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev)
{
}
static inline void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev)
{
}
#endif /* CONFIG_RT2X00_LIB_LEDS */
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 18:57:13 -06:00
#endif /* RT2X00LIB_H */
Reference in a new issue Copy permalink