Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/arm/boot/dts/tegra20.dtsi

208 lines
4.2 KiB
Text
Raw Normal View History

arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
/include/ "skeleton.dtsi"
/ {
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
ARM: dt: Add binding for Tegra PMC The Tegra PMC (Power Management Controller) interfaces with an external PMU (Power Management Unit), and controls wake-up from sleep modes. This initial binding is the bare minimum required to control the PMC's inversion of the PMU's interrupt signal. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-25 14:43:27 -07:00
pmc@7000f400 {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
};
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
intc: interrupt-controller@50041000 {
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
compatible = "arm,cortex-a9-gic";
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
interrupt-controller;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
#interrupt-cells = <3>;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
reg = < 0x50041000 0x1000 >,
< 0x50040100 0x0100 >;
};
ARM: dt: Add ARM PMU to tegra*.dtsi This enables HW performance measurements, and usage of the "perf" tool. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-27 18:26:36 -07:00
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 56 0x04
0 57 0x04>;
};
ARM: dt: tegra: Add Tegra APB DMA device tree binding Document binding, and add the node to tegra*.dtsi. The driver isn't actually instantiated from this node yet, but the I2S binding will rely on being able to refer to the APB DMA node using a phandle. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-11 16:09:54 -07:00
apbdma: dma@6000a000 {
compatible = "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1200>;
interrupts = < 0 104 0x04
0 105 0x04
0 106 0x04
0 107 0x04
0 108 0x04
0 109 0x04
0 110 0x04
0 111 0x04
0 112 0x04
0 113 0x04
0 114 0x04
0 115 0x04
0 116 0x04
0 117 0x04
0 118 0x04
0 119 0x04 >;
};
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
i2c@7000c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C000 0x100>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 38 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
i2c@7000c400 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C400 0x100>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 84 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
i2c@7000c500 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C500 0x100>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 92 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
i2c@7000d000 {
#address-cells = <1>;
#size-cells = <0>;
arm/dt: tegra: Use new compatible value for DVC I2C controller Update the device tree to indicate which I2C controller is the DVC controller. AUXDATA needs to be updated too, since the compatible value changed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-17 23:29:31 -07:00
compatible = "nvidia,tegra20-i2c-dvc";
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
reg = <0x7000D000 0x200>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 53 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
ARM: dt: tegra: Add labels for I2S controllers This will allow the sound node to refer to the I2S controllers by name when creating phandles. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-11 16:09:56 -07:00
tegra_i2s1: i2s@70002800 {
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 13 0x04 >;
ARM: dt: tegra: Modify I2S nodes to match binding Adjust the dma-channel property name to match the binding implemented by the driver. The binding was implemented and documented in a separate change to the ASoC tree. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-11 16:09:55 -07:00
nvidia,dma-request-selector = < &apbdma 2 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
ARM: dt: tegra: Add labels for I2S controllers This will allow the sound node to refer to the I2S controllers by name when creating phandles. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-11 16:09:56 -07:00
tegra_i2s2: i2s@70002a00 {
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
compatible = "nvidia,tegra20-i2s";
reg = <0x70002a00 0x200>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 3 0x04 >;
ARM: dt: tegra: Modify I2S nodes to match binding Adjust the dma-channel property name to match the binding implemented by the driver. The binding was implemented and documented in a separate change to the ASoC tree. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-11 16:09:55 -07:00
nvidia,dma-request-selector = < &apbdma 1 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
das@70000c00 {
compatible = "nvidia,tegra20-das";
reg = <0x70000c00 0x80>;
};
gpio: gpio@6000d000 {
compatible = "nvidia,tegra20-gpio";
reg = < 0x6000d000 0x1000 >;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 32 0x04
0 33 0x04
0 34 0x04
0 35 0x04
0 55 0x04
0 87 0x04
0 89 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
#gpio-cells = <2>;
gpio-controller;
};
arm/dt: Tegra: Add pinmux node to tegra20.dtsi Add a pinmux node to tegra20.dtsi in order to instantiate the future pinmux device. v2: Specify reg property precisely; don't just point at the whole APB_MISC register range. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-11 16:16:13 -06:00
pinmux: pinmux@70000000 {
compatible = "nvidia,tegra20-pinmux";
reg = < 0x70000014 0x10 /* Tri-state registers */
0x70000080 0x20 /* Mux registers */
0x700000a0 0x14 /* Pull-up/down registers */
0x70000868 0xa8 >; /* Pad control registers */
};
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
serial@70006000 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 36 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
serial@70006040 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 37 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
serial@70006200 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 46 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
serial@70006300 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 90 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
serial@70006400 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006400 0x100>;
reg-shift = <2>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 91 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
ARM: tegra: emc: device tree bindings Device tree bindings for the EMC tables on tegra. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-13 03:14:55 -06:00
emc@7000f400 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-emc";
reg = <0x7000f400 0x200>;
};
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
sdhci@c8000000 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 14 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
sdhci@c8000200 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000200 0x200>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 15 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
sdhci@c8000400 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000400 0x200>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 19 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
sdhci@c8000600 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000600 0x200>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 31 0x04 >;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
arm/dt: add basic usb nodes to tegra device trees For now they are a minimal binding. It needs to be amended with vendor-specific settings for phy setup and link tuning, etc. v2: Added bindings specification and phy_type properties Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-11-04 03:12:39 -06:00
usb@c5000000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5000000 0x4000>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 20 0x04 >;
arm/dt: add basic usb nodes to tegra device trees For now they are a minimal binding. It needs to be amended with vendor-specific settings for phy setup and link tuning, etc. v2: Added bindings specification and phy_type properties Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-11-04 03:12:39 -06:00
phy_type = "utmi";
};
usb@c5004000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5004000 0x4000>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 21 0x04 >;
arm/dt: add basic usb nodes to tegra device trees For now they are a minimal binding. It needs to be amended with vendor-specific settings for phy setup and link tuning, etc. v2: Added bindings specification and phy_type properties Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-11-04 03:12:39 -06:00
phy_type = "ulpi";
};
usb@c5008000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5008000 0x4000>;
arm/tegra: convert tegra20 to GIC devicetree binding Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the interrupt definitions in the dts files according to Documentation/devicetree/bindings/arm/gic.txt v3 (swarren): * Moved of_irq_init() call into board-dt.c to avoid ifdef'ing it. - Even with a dummy replacement if !CONFIG_OF, the reference from tegra_dt_irq_match[] to gic_of_init() would still have to be ifdef'd - It's plausible that tegra_dt_irq_match[] may need to contain more entries in the future, and defining what they are seems more suitable for board-dt.c than irq.c v2 (swarren): * Removed some stale GIC init code from board-dt.c * Undid some accidental 0x -> 0x0 search/replace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: added include of <asm/hardware/gic.h> for compile to pass] Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-29 18:29:19 -07:00
interrupts = < 0 97 0x04 >;
arm/dt: add basic usb nodes to tegra device trees For now they are a minimal binding. It needs to be amended with vendor-specific settings for phy setup and link tuning, etc. v2: Added bindings specification and phy_type properties Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-11-04 03:12:39 -06:00
phy_type = "utmi";
};
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-19 17:26:54 -06:00
};
Reference in a new issue Copy permalink