Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/regulator/Makefile

117 lines
5.6 KiB
Makefile
Raw Normal View History

regulator: core kbuild files This patch adds kernel build support for the regulator core. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
2008-04-30 10:13:42 -06:00
#
# Makefile for regulator drivers.
#
regulator: core: Split devres code out into a separate file Cut down on the size of core.c a bit more and ensure that the devres versions of things don't do too much peering inside the internals of the APIs they wrap. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-11 06:15:40 -06:00
obj-$(CONFIG_REGULATOR) += core.o dummy.o fixed-helper.o helpers.o devres.o
regulator: helper routine to extract regulator_init_data The helper routine is meant to be used by the regulator drivers to extract the regulator_init_data structure from the data that is passed from device tree. 'consumer_supplies' which is part of regulator_init_data is not extracted as the regulator consumer mappings are passed through DT differently, implemented in subsequent patches. Similarly the regulator<-->parent/supply mapping is handled in subsequent patches. Also add documentation for regulator bindings to be used to pass regulator_init_data struct information from device tree. Some of the regulator properties which are linux and board specific, are left out since its not clear if they can be in someway embedded into the kernel or passed in from DT. They will be revisited later. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-18 04:17:17 -07:00
obj-$(CONFIG_OF) += of_regulator.o
regulator: core kbuild files This patch adds kernel build support for the regulator core. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
2008-04-30 10:13:42 -06:00
obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
regulator: add userspace-consumer driver The userspace-consumer driver allows control of voltage and current regulator state from userspace. This is required for fine-grained power management of devices that are completely controller by userspace applications, e.g. a GPS transciever connected to a serial port. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-26 07:49:39 -06:00
obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
regulator: core kbuild files This patch adds kernel build support for the regulator core. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
2008-04-30 10:13:42 -06:00
regulator: 88pm800: add regulator driver for 88pm800 Add the regulator driver for PMIC 88pm800 including device tree support. 88pm800 is an I2C-based power-management IC containing voltage regulators, a real-time clock, and some general purpose ADC devices, Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-17 21:07:03 -06:00
obj-$(CONFIG_REGULATOR_88PM800) += 88pm800.o
regulator: Sort Kconfig and Makefile entries Sort Kconfig entries by company name/driver in alphabetical order. Sort Makefile entries by alphabetical order. In order to group all the Kconfig entries by company name, this patch also adds company name to some Kconfig entries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21 18:29:16 -07:00
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
regulator: ab8500: Ensure AB8500 external registers are probed first This patch changes the order in which the AB8500 regulator drivers are registered and subsequently probed. It saves a lot of -EPROBE_DEFEER nonsense and bootlog noise, as some AB8500 core regulators depend on the external ones for supply voltage. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-07 10:11:24 -06:00
obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o
regulator: act8865: add PMIC act8865 driver Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-23 19:34:28 -07:00
obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
regulator: act8945a: add regulator driver for ACT8945A This patch adds new regulator driver to support ACT8945A MFD chip's regulators. The ACT8945A has three step-down DC/DC converters and four low-dropout regulators. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04 21:33:30 -07:00
obj-$(CONFIG_REGULATOR_ACT8945A) += act8945a-regulator.o
regulator: new drivers for AD5398 and AD5821 The AD5398 and AD5821 are single 10-bit DAC with 120 mA output current sink capability. They feature an internal reference and operates from a single 2.7 V to 5.5 V supply. This driver supports both the AD5398 and the AD5821. It adapts into the voltage and current framework. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-03 21:46:04 -06:00
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
regulator: Add Anatop regulator driver Anatop is an integrated regulator inside i.MX6 SoC. There are 3 digital regulators which controls PU, CORE (ARM), and SOC. And 3 analog regulators which controls 1P1, 2P5, 3P0 (USB). This patch adds the Anatop regulator driver. Signed-off-by: Nancy Chen <Nancy.Chen@freescale.com> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-13 20:29:12 -06:00
obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
regulator: Add driver for Arizona LDO1 Arizona class devices feature an integrated LDO which is intended to supply the digital core for the device. Provide a driver offering minimal control of this regulator. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23 06:07:57 -06:00
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
regulator: add a regulator driver for the AS3711 PMIC This driver supports the 4 DCDC and 8 LDO regulators on the AS3711 PMIC. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-22 03:12:08 -07:00
obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
regulator: as3722: add regulator driver for AMS AS3722 The AMS AS3722 is a compact system PMU suitable for mobile phones, tablets etc. It has 4 DCDC step down regulators, 3 DCDC step down controller, 11 LDOs. Add a driver to support accessing the DCDC/LDOs found on the AMS AS3722 PMIC using regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-20 06:30:13 -06:00
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
regulator: AXP20x: Add support for regulators subsystem AXP202 and AXP209 come with two synchronous step-down DC-DCs and five LDOs. This patch introduces basic support for those regulators. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-11 03:38:10 -06:00
obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
regulator: add bcm590xx regulator driver Add a regulator driver for the BCM590xx PMU voltage regulators. The driver supports LDOs and DCDCs in normal mode only. There is no support for low-power mode or power sequencing. Signed-off-by: Matt Porter <mporter@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-11 09:46:13 -06:00
obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
regulator: Sort Kconfig and Makefile entries Sort Kconfig entries by company name/driver in alphabetical order. Sort Makefile entries by alphabetical order. In order to group all the Kconfig entries by company name, this patch also adds company name to some Kconfig entries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21 18:29:16 -07:00
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
regulator: DA9055 regulator driver This is the Regulator patch for the DA9055 PMIC and has got dependency on the DA9055 MFD core. This patch support all of the DA9055 regulators. The output voltages are fully programmable through I2C interface only. The platform data with regulation constraints is passed down from the board to the regulator. This patch is functionaly tested on SMDK6410 board. DA9055 Evaluation board was connected to the SMDK6410 board. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-01 02:27:56 -06:00
obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o
regulator: da9062: DA9062 regulator driver Add BUCK and LDO regulator driver support for DA9062 Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-19 07:10:30 -06:00
obj-$(CONFIG_REGULATOR_DA9062) += da9062-regulator.o
regulator: da9063: Add Dialog DA9063 voltage regulators support. The driver adds support for the following DA9063 PMIC regulators: - 11x LDOs (named LDO1 - LDO11), - 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI), Regulators provide following operations: - REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators, - REGULATOR_CHANGE_MODE for LDOs and buck converters, where: - LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY, - buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY, - REGULATOR_CHANGE_CURRENT for buck converters (current limits). The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8 and LDO11. Internally, PMIC provides two voltage configurations for normal and suspend system state for each regulator. The driver switches between those on suspend/wake-up to provide quick and fluent output voltage change. This driver requires MFD core driver for operation. Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 11:00:45 -06:00
obj-$(CONFIG_REGULATOR_DA9063) += da9063-regulator.o
regulator: da9210: New driver I2C driver for the Dialog DA9210 Multi-phase 12A DC-DC Buck. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 08:30:48 -06:00
obj-$(CONFIG_REGULATOR_DA9210) += da9210-regulator.o
regulator: da9211: new regulator driver This is the driver for the Dialog DA9211 Multi-phase 12A DC-DC Buck Converter regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban <james.ban.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-13 22:48:45 -06:00
obj-$(CONFIG_REGULATOR_DA9211) += da9211-regulator.o
regulator: Sort Kconfig and Makefile entries Sort Kconfig entries by company name/driver in alphabetical order. Sort Makefile entries by alphabetical order. In order to group all the Kconfig entries by company name, this patch also adds company name to some Kconfig entries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21 18:29:16 -07:00
obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
regulator: Fairchild fan53555 support This driver supports Fairchild FAN53555 Digitally Programmable TinyBuck Regulator. The FAN53555 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5V to 5.5V. The output voltage is programmed through an I2C interface. Signed-off-by: Yunfan Zhang <yfzhang@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-08 04:52:18 -06:00
obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
regulator: gpio-regulator: Sort in Makefile Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-03 16:20:04 -06:00
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
regulator: add driver for hi6421 voltage regulator Add driver support for HiSilicon Hi6421 voltage regulators. Two rules for regulator enabling are defined in hi6421 spec: 1) Between disable and enable of each regulator (LDOs or BUCKs), there must be a protection gap. Use @off_on_delay of regulator core to implement this. 2) No two regulators can be enabled at the same time. Use mutex in hi6421_regulator_pdata to ensure this. A protection gap of 100us is added into each LDO/BUCK's .enable_time. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-13 05:33:42 -06:00
obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
regulator: hi655x: enable regulator for hi655x PMIC Add the regulator driver for hi655x PMIC. Signed-off-by: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Fei Wang <w.f@huawei.com> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-13 23:29:22 -07:00
obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
regulator: Sort Kconfig and Makefile entries Sort Kconfig entries by company name/driver in alphabetical order. Sort Makefile entries by alphabetical order. In order to group all the Kconfig entries by company name, this patch also adds company name to some Kconfig entries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21 18:29:16 -07:00
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
regulator: isl9305: Add Intersil ISL9305/H driver The ISL9305 and ISL9305H are mini-PMICs offering two DCDC regulators and two LDO regulators. While there are some register differences between them these do not affect the current Linux driver as the relevant features are not yet supported. Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-05 18:11:12 -06:00
obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
regulator: add LM363X driver LM363X regulator driver supports LM3631 and LM3632. LM3631 has 5 regulators. LM3632 provides 3 regulators. One boost output and LDOs are used for the display module. Boost voltage is configurable but always on. Supported operations for LDOs are enabled/disabled and voltage change. Two LDOs of LM3632 can be controlled by external pins. Those are configured through the DT properties. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25 23:57:05 -07:00
obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o
LP3971 PMIC regulator driver (updated and combined version) This patch adds regulator drivers for National Semiconductors LP3971 PMIC. This LP3971 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3971 PMIC controller uses I2C interface. Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-05-18 23:33:55 -06:00
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
Regulator: LP3972 PMIC regulator driver This patch adds regulator drivers for National Semiconductors LP3972 PMIC. This LP3972 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3972 PMIC controller uses I2C interface. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-16 02:48:49 -06:00
obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
regulator: add new regulator driver for lp872x This driver supports TI/National LP8720, LP8725 PMIC. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Reviewed-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-19 01:08:22 -06:00
obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
regulator: lp873x: Add support for lp873x PMIC regulators The regulators set consists of 2 BUCKs and 2 LDOs. The output voltages are configurable and are meant to supply power to the main processor and other components. The ramp delay is configurable for both BUCKs. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-09 22:04:39 -06:00
obj-$(CONFIG_REGULATOR_LP873X) += lp873x-regulator.o
regulator: add new lp8788 regulator driver TI LP8788 PMU has 4 BUCKS and 22 LDOs. The voltage of BUCK1 and BUCK2 can be controlled by external gpios. And some LDOs also can be enabled by external gpios. The regmap interface is used for regulator operations. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-18 08:32:57 -06:00
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
regulator: lp8755: new driver for LP8755 This patch is for new lp8755 regulator dirver and several unsed variables were deleted and then test was done. LP8755 : The LP8755 is a high performance power management unit.It contains six step-down DC-DC converters which can can be filexibly bundled together in multiphase converters as required by application. www.ti.com Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-16 18:24:06 -07:00
obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
regulator: Add LTC3589 support This patch adds support for the Linear Technology LTC3589, LTC3589-1, and LTC3589-2 8-output I2C voltage regulator ICs. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-26 02:38:16 -06:00
obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
regulator: Rename files for Maxim PMIC drivers Most Maxim PMIC regulator drivers are for sub-devices of Multi-Function Devices with drivers under drivers/mfd. But for many of these, the same object file name was used for both the MFD and the regulator drivers. Having 2 different drivers with the same name causes a lot of confusion to Kbuild, specially if these are built as module since only one module will be installed and also exported symbols will be undefined due being overwritten by the other module during modpost. For example, it fixes the following issue when both drivers are module: $ make M=drivers/regulator/ ... CC [M] drivers/regulator//max14577.o Building modules, stage 2. MODPOST 1 modules WARNING: "maxim_charger_calc_reg_current" [drivers/regulator//max14577.ko] undefined! WARNING: "maxim_charger_currents" [drivers/regulator//max14577.ko] undefined! Reported-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-17 11:54:54 -06:00
obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
Maxim 1586 regulator driver The Maxim 1586 regulator is a voltage regulator with 2 voltage outputs, specially suitable for Marvell PXA chips. One output is in the range of required VCC_CORE by the PXA27x chips, the other in the VCC_USIM required as well by PXA27x chips. The chip is controlled through the I2C bus. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-23 12:10:43 -06:00
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
regulator: max77620: add regulator driver for max77620/max20024 MAXIM Semiconductor's PMIC, MAX77620 and MAX20024 have the multiple DCDC and LDOs. This supplies the power to different components of the system. Also these rails has configuration for ramp time, flexible power sequence, slew rate etc. Add regulator driver to access these rails via regulator APIs. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-11 04:56:34 -07:00
obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
regulator: enable max8649 regulator driver Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-01-25 08:24:09 -07:00
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
regulator: add driver for MAX8660/8661 Tested with a MX25-based custom board. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-25 01:39:26 -06:00
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
regulator: add MAX8907 driver The MAX8907 is an I2C-based power-management IC containing voltage regulators, a reset controller, a real-time clock, and a touch-screen controller. The original driver was written by: * Gyungoh Yoo <jack.yoo@maxim-ic.com> Various fixes and enhancements by: * Jin Park <jinyoungp@nvidia.com> * Tom Cherry <tcherry@nvidia.com> * Prashant Gaikwad <pgaikwad@nvidia.com> * Dan Willemsen <dwillemsen@nvidia.com> * Laxman Dewangan <ldewangan@nvidia.com> During upstreaming, I (swarren): * Converted to regmap. * Allowed probing from device tree. * Reworked the regulator driver to be represented as a single device that provides multiple regulators, rather than as a device per regulator. * Replaced many regulator ops with standard functions. * Added ability to specify supplies for each regulator. * Removed the WLED regulator. If/when we expose this in the driver, it should be a backlight object not a regulator object. * Renamed from max8907c->max8907, since the driver covers at least the C and B revisions. * General cleanup. Signed-off-by: Gyungoh Yoo <jack.yoo@maxim-ic.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-09 14:24:34 -06:00
obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o
regulator: Add max8925 support MAX8925 contains 3 Buck and 20 LDO regulator. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-11 05:10:08 -07:00
obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
MAX8952 PMIC Driver Initial Release MAX8952 PMIC is used to provide voltage output between 770mV - 1400mV with DVS support. In this initial release, users can set voltages for four DVS modes, RAMP delay values, and SYNC frequency. Controlling FPWM/SYNC_MODE/Pull-Down/Ramp Modes and reading CHIP_ID is not supported in this release. If GPIO of EN is not valid in platform data, the driver assumes that it is always-on. If GPIO of VID0 or VID1 is invalid, the driver pulls down VID0 and VID1 to fix DVS mode as 0 and disables DVS support. We assume that V_OUT is capable to provide every voltage from 770mV to 1.40V in 10mV steps although the data sheet has some ambiguity on it. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- v2: - Style correction - Can accept platform_data with invalid GPIOs - Removed unnecessary features - Improved error handling Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-19 23:43:56 -06:00
obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
regulator: max8973: add regulator driver support The MAXIM MAX8973 high-efficiency, three phase, DC-DC step-down switching regulator delievers up to 9A of output current. Each phase operates at a 2MHz fixed frequency with a 120 deg shift from the adjacent phase, allowing the use of small magnetic component. Add regulator driver for this device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-18 18:28:29 -07:00
obj-$(CONFIG_REGULATOR_MAX8973) += max8973-regulator.o
regulator: Rename files for Maxim PMIC drivers Most Maxim PMIC regulator drivers are for sub-devices of Multi-Function Devices with drivers under drivers/mfd. But for many of these, the same object file name was used for both the MFD and the regulator drivers. Having 2 different drivers with the same name causes a lot of confusion to Kbuild, specially if these are built as module since only one module will be installed and also exported symbols will be undefined due being overwritten by the other module during modpost. For example, it fixes the following issue when both drivers are module: $ make M=drivers/regulator/ ... CC [M] drivers/regulator//max14577.o Building modules, stage 2. MODPOST 1 modules WARNING: "maxim_charger_calc_reg_current" [drivers/regulator//max14577.ko] undefined! WARNING: "maxim_charger_currents" [drivers/regulator//max14577.ko] undefined! Reported-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-17 11:54:54 -06:00
obj-$(CONFIG_REGULATOR_MAX8997) += max8997-regulator.o
drivers: regulator: add Maxim 8998 driver Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> This patch adds voltage regulator driver for Maxim 8998 chip. This chip is used on Samsung Aquila and GONI boards and provides following functionalities: - 4 BUCK voltage converters, 17 LDO power regulators and 5 other power controllers - battery charger This patch adds basic driver for voltage regulators and MAX 8998 MFD core. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-16 01:04:16 -06:00
obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
regulator: Rename files for max77686 and max77802 drivers The max77686 and max77802 regulator drivers are for sub-devices of a MFD driver for some PMIC blocks. But the same object file name (max77686.o) was used for both the common MFD driver and the max77686 regulator one. This confuses kbuild if both drivers are built as module causing the MFD driver to not be copied when installing the modules. Also, max77{686,802} are a quite generic name for MFD subdevices drivers so it is better to rename them to max77{686,802}-regulator like it's the case for most regulator drivers. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-11 21:14:23 -07:00
obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o
regulator: Rename files for Maxim PMIC drivers Most Maxim PMIC regulator drivers are for sub-devices of Multi-Function Devices with drivers under drivers/mfd. But for many of these, the same object file name was used for both the MFD and the regulator drivers. Having 2 different drivers with the same name causes a lot of confusion to Kbuild, specially if these are built as module since only one module will be installed and also exported symbols will be undefined due being overwritten by the other module during modpost. For example, it fixes the following issue when both drivers are module: $ make M=drivers/regulator/ ... CC [M] drivers/regulator//max14577.o Building modules, stage 2. MODPOST 1 modules WARNING: "maxim_charger_calc_reg_current" [drivers/regulator//max14577.ko] undefined! WARNING: "maxim_charger_currents" [drivers/regulator//max14577.ko] undefined! Reported-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-17 11:54:54 -06:00
obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o
regulator: Rename files for max77686 and max77802 drivers The max77686 and max77802 regulator drivers are for sub-devices of a MFD driver for some PMIC blocks. But the same object file name (max77686.o) was used for both the common MFD driver and the max77686 regulator one. This confuses kbuild if both drivers are built as module causing the MFD driver to not be copied when installing the modules. Also, max77{686,802} are a quite generic name for MFD subdevices drivers so it is better to rename them to max77{686,802}-regulator like it's the case for most regulator drivers. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-11 21:14:23 -07:00
obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
regulator/mc13783: rename source file to match other drivers One annoying thing about the old name was that the module was just called mc13783 which caused wrong expectations (at least for me). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensoruce.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-11-10 01:18:06 -07:00
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
regulator: support PMIC mc13892 add support for mc13892, tested on mx51 babbage board Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Yong Shen <yong.shen@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-13 23:00:55 -07:00
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
make mc13783 regulator code generic move some common functions and micros of mc13783 regulaor driver to a seperate file, which makes it possible for mc13892 to share code. Signed-off-by: Yong Shen <yong.shen@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-13 23:00:54 -07:00
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
regulator: mt6311: Add support for mt6311 regulator Add regulator support for mt6311. It has 2 regulaotrs - Buck and LDO, provide the related buck/ldo voltage data to the driver, and creates the regulator_desc table. Supported operations for Buck are enabled/disabled and voltage change, only enabled/disabled for LDO. Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-23 23:24:41 -06:00
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
regulator: mt6323: Add support for MT6323 regulator The MT6323 is a regulator found on boards based on MediaTek MT7623 and probably other SoCs. It is a so called pmic and connects as a slave to SoC using SPI, wrapped inside the pmic-wrapper. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-18 06:40:51 -06:00
obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
regulator: mt6397: Add support for MT6397 regulator Add MT6397 regulator driver. Signed-off-by: Flora Fu <flora.fu@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-04 21:07:54 -07:00
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
regulator: qcom-rpm: Regulator driver for the Qualcomm RPM Driver for regulators exposed by the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-22 17:25:29 -06:00
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
regulator: Regulator driver for the Qualcomm RPM Driver for regulators exposed by the Resource Power Manager (RPM) found in devices based on Qualcomm 8974 and newer platforms. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Andy Gross <agross@codeaurora.org> Tested-by: Tim Bird <tim.bird@sonymobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-17 12:43:59 -06:00
obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
regulator: Add QCOM SPMI regulator driver Add an SPMI regulator driver for Qualcomm's PM8841, PM8941, and PM8916 PMICs. This driver is based largely on code from codeaurora.org[1]. [1] https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/regulator/qpnp-regulator.c?h=msm-3.10 Cc: David Collins <collinsd@codeaurora.org> Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 16:47:10 -06:00
obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
regulator: regulator for Palmas Kconfig Add the Kconfig/Makefile stuff for the palmas regulator driver Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-15 00:48:59 -06:00
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
regulator: pfuze100: add pfuze100 regulator driver Add pfuze100 regulator driver. Signed-off-by: Robin Gong <b38343@freescale.com> Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-24 21:33:18 -06:00
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
regulator: pv88060: new regulator driver This is the driver for the Powerventure PV88060 BUCKs and LDOs regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban <James.Ban.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-18 17:59:15 -07:00
obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
regulator: pv88080: new regulator driver This is the driver for the Powerventure PV88080 BUCKs regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban <James.Ban..opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-14 22:34:22 -06:00
obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o
regulator: pv88090: new regulator driver This is the driver for the Powerventure PV88090 BUCKs and LDOs regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban <James.Ban.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-07 18:57:29 -07:00
obj-$(CONFIG_REGULATOR_PV88090) += pv88090-regulator.o
regulator: pwm-regulator: get voltage and duty table from dts rename st-pwm to pwm-regulator. And support getting voltage & duty table from device tree, other platforms can also use this driver without any modify. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-27 20:28:53 -06:00
obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
regulator: tps51632: Add tps51632 regulator driver The TPS51632 is a driverless step down controller with serial control. Advanced features such as D-Cap+ architecture with overlapping pulse support and OSR overshoot reduction provide fast transient response, lowest output capacitance and high efficiency. The TPS51632 supports both I2C and DVFS interfaces (through PWM) for dynamic control of the output voltage and current monitor telemetry. Add regulator driver for TPS51632. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-06 09:17:46 -06:00
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
regulator: add pbias regulator support pbias register controls internal power supply to sd card i/o pads in most OMAPs (OMAP2-5, DRA7). Control bits for selecting voltage level and enabling/disabling are in the same PBIAS register. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Mark Brown <broonie@linaro.org> Tested-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Stefan Roese <sr@denx.de> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-19 07:56:40 -07:00
obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
regulator: Sort Kconfig and Makefile entries Sort Kconfig entries by company name/driver in alphabetical order. Sort Makefile entries by alphabetical order. In order to group all the Kconfig entries by company name, this patch also adds company name to some Kconfig entries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21 18:29:16 -07:00
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
regulator: Add support for RICOH PMIC RC5T583 regulator The RC5T583 PMIC from RICOH consists of 4 DCDC and 10 LDOs. This driver supports the control of different regulator output through regulator interface. This driver depends on MFD driver of RC5T583 and uses mfd rc5t583 apis to communicate to device for accessing different device's registers. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04 01:14:00 -06:00
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
regulator: RK808: Add regulator driver for RK808 The regulator module consists of 4 DCDCs, 8 LDOs and 2 switches. The output voltages are configurable and are meant to supply power to the main processor and other components Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-19 21:36:42 -06:00
obj-$(CONFIG_REGULATOR_RK808) += rk808-regulator.o
regulator: rn5t618: add driver for Ricoh RN5T618 regulators This driver supports the 3 DCDC and 7 LDO regulators available on Ricoh RN5T618 PMIC. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-08-30 06:50:24 -06:00
obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o
regulator: rt5033: Add RT5033 Regulator device driver This patch add device driver of Richtek RT5033 PMIC. The driver support multiple regulator like LDO and synchronous Buck. The integrated synchronous buck converter is designed to provide 0.6 A application with high efficiency. Two LDOs are integrated. One safe LDO is for 60mA and the other one LDO is for 150 mA. Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-12 05:07:59 -07:00
obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o
regulator: Add support for S2MPA01 regulator Add support for S2MPA01 voltage and current regulator. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-14 05:51:58 -06:00
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
regulator: s2mps11: Add samsung s2mps11 regulator driver This patch add Samsung S2MPS11 regulator driver. The S2MPS11 can support 10 Bucks and 38 LDOs and RTC. Especially, S2MPS11 is designed for high performance Samsung application processor. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-11 06:08:17 -06:00
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
regulator: Sort Kconfig and Makefile entries Sort Kconfig entries by company name/driver in alphabetical order. Sort Makefile entries by alphabetical order. In order to group all the Kconfig entries by company name, this patch also adds company name to some Kconfig entries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21 18:29:16 -07:00
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
regulator: sky81452: Adding Skyworks SKY81452 regulator driver Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-08 03:10:22 -06:00
obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
regulator: add STw481x VMMC driver The ST Microelectronics STw481x PMIC used for the Nomadik has one single software-controlled regulator for VMMC. This driver registers directly to the compatible string as there is just one regulator. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-13 13:01:15 -06:00
obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
regulator: build: Sort Kconfig Reduces merge issues if nothing else. Signed-off-by: Mark Brown <broonie@kernel.org>
2013-07-05 13:45:22 -06:00
obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
regulator: Add a subdriver for TI TPS6105x regulator portions v2 This adds a subdriver for the regulator found inside the TPS61050 and TPS61052 chips. Cc: Samuel Ortiz <samuel.ortiz@intel.com> Cc: Ola Lilja <ola.o.lilja@stericsson.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-09 05:02:55 -07:00
obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
regulator: Sort Kconfig and Makefile entries Sort Kconfig entries by company name/driver in alphabetical order. Sort Makefile entries by alphabetical order. In order to group all the Kconfig entries by company name, this patch also adds company name to some Kconfig entries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21 18:29:16 -07:00
obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile Adding TPS65023 and TPS6507x regulator driver support in drivers/regulator/Makefile and drivers/regulator/Kconfig Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-08-20 13:09:44 -06:00
obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
regulator: tps65086: Add regulator driver for the TPS65086 PMIC Add support for TPS65086 PMIC regulators. The regulators set consists of 3 Step-down Controllers, 3 Step-down Converters, 3 LDOs, 3 Load Switches, and a Sink and Source LDO. The output voltages are configurable and are meant to supply power to a SoC and/or other components. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-04 10:12:14 -07:00
obj-$(CONFIG_REGULATOR_TPS65086) += tps65086-regulator.o
regulator: Add TPS65090 regulator driver Add TPS65090 regulator driver TPS65090 PMIC from TI consists of 3 step down converters, 2 always on LDOs and 7 current limited load switches. The output voltages are ON/OFF controllable and are meant to supply power to the components on target board. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-22 07:04:09 -06:00
obj-$(CONFIG_REGULATOR_TPS65090) += tps65090-regulator.o
regulator: tps65217: Add tps65217 regulator driver This patch adds tps65217 PMIC as a regulator The regulator module consists of 3 DCDCs and 4 LDOs. The output voltages are configurable and are meant to supply power to the main processor and other components Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-11 03:41:49 -07:00
obj-$(CONFIG_REGULATOR_TPS65217) += tps65217-regulator.o
regulator: tps65218: Add Regulator driver for TPS65218 PMIC This patch adds support for TPS65218 PMIC regulators. The regulators set consists of 6 DCDCs and 1 LDO. The output voltages are configurable and are meant to supply power to the main processor and other components. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-05 22:50:13 -07:00
obj-$(CONFIG_REGULATOR_TPS65218) += tps65218-regulator.o
regulator: add driver for tps6524x regulator TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using SPI. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-07 10:04:11 -07:00
obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
regulator: Sort Kconfig and Makefile entries Sort Kconfig entries by company name/driver in alphabetical order. Sort Makefile entries by alphabetical order. In order to group all the Kconfig entries by company name, this patch also adds company name to some Kconfig entries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21 18:29:16 -07:00
obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
TPS65910: Add tps65910 regulator driver The regulator module consists of 3 DCDCs and 8 LDOs. The output voltages are configurable and are meant to supply power to the main processor and other components Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-02 15:20:08 -06:00
obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
regulator: Sort Kconfig and Makefile entries Sort Kconfig entries by company name/driver in alphabetical order. Sort Makefile entries by alphabetical order. In order to group all the Kconfig entries by company name, this patch also adds company name to some Kconfig entries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21 18:29:16 -07:00
obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
regulator: tps80031: add regulator driver for tps80031 Add regulator driver for Texas Instrument TPS80031/TPS80032 device. TPS80031/ TPS80032 Fully Integrated Power Management with Power Path and Battery Charger. It has 5 configurable step-down converters, 11 general purpose LDOs, VBUS generator and digital output to control regulators. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-11 08:12:01 -07:00
obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
regulator: Sort Kconfig and Makefile entries Sort Kconfig entries by company name/driver in alphabetical order. Sort Makefile entries by alphabetical order. In order to group all the Kconfig entries by company name, this patch also adds company name to some Kconfig entries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21 18:29:16 -07:00
obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
regulator: vexpress: rename vexpress regulator implementation The vexpress regulator implementation is currently just called vexpress. This is a problem because it clashes with another module with the same name in hardware monitors. This patch renames the vexpress regulator implementation to vexpress-regulator so that there will be no clash in the module namespace. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Reported-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-29 10:37:01 -07:00
obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
regulator: Sort Kconfig and Makefile entries Sort Kconfig entries by company name/driver in alphabetical order. Sort Makefile entries by alphabetical order. In order to group all the Kconfig entries by company name, this patch also adds company name to some Kconfig entries. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21 18:29:16 -07:00
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
regulator: Add S5M8767 configuration This patch add Samsung S5M8767A pmic configuration. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-12 18:13:13 -07:00
Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile Adding TPS65023 and TPS6507x regulator driver support in drivers/regulator/Makefile and drivers/regulator/Kconfig Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-08-20 13:09:44 -06:00
regulator: core kbuild files This patch adds kernel build support for the regulator core. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
2008-04-30 10:13:42 -06:00
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
Reference in a new issue Copy permalink