regulator: 88pm800: add regulator driver for 88pm800
Add the regulator driver for PMIC 88pm800 including device tree support. 88pm800 is an I2C-based power-management IC containing voltage regulators, a real-time clock, and some general purpose ADC devices, Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Chao Xie
Mark Brown
parent
e54e6aa245
commit
95f1dc08c6
4 changed files with 426 additions and 0 deletions
38
Documentation/devicetree/bindings/regulator/88pm800.txt
Normal file
38
Documentation/devicetree/bindings/regulator/88pm800.txt
Normal file
|
|
@ -0,0 +1,38 @@
|
|||
Marvell 88PM800 regulator
|
||||
|
||||
Required properties:
|
||||
- compatible: "marvell,88pm800"
|
||||
- reg: I2C slave address
|
||||
- regulators: A node that houses a sub-node for each regulator within the
|
||||
device. Each sub-node is identified using the node's name (or the deprecated
|
||||
regulator-compatible property if present), with valid values listed below.
|
||||
The content of each sub-node is defined by the standard binding for
|
||||
regulators; see regulator.txt.
|
||||
|
||||
The valid names for regulators are:
|
||||
|
||||
buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
|
||||
ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19
|
||||
|
||||
Example:
|
||||
|
||||
pmic: 88pm800@31 {
|
||||
compatible = "marvell,88pm800";
|
||||
reg = <0x31>;
|
||||
|
||||
regulators {
|
||||
buck1 {
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <3950000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
ldo1 {
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <15000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
...
|
||||
};
|
||||
};
|
||||
377
drivers/regulator/88pm800.c
Normal file
377
drivers/regulator/88pm800.c
Normal file
|
|
@ -0,0 +1,377 @@
|
|||
/*
|
||||
* Regulators driver for Marvell 88PM800
|
||||
*
|
||||
* Copyright (C) 2012 Marvell International Ltd.
|
||||
* Joseph(Yossi) Hanin <yhanin@marvell.com>
|
||||
* Yi Zhang <yizhang@marvell.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/mfd/88pm80x.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
|
||||
/* LDO1 with DVC[0..3] */
|
||||
#define PM800_LDO1_VOUT (0x08) /* VOUT1 */
|
||||
#define PM800_LDO1_VOUT_2 (0x09)
|
||||
#define PM800_LDO1_VOUT_3 (0x0A)
|
||||
#define PM800_LDO2_VOUT (0x0B)
|
||||
#define PM800_LDO3_VOUT (0x0C)
|
||||
#define PM800_LDO4_VOUT (0x0D)
|
||||
#define PM800_LDO5_VOUT (0x0E)
|
||||
#define PM800_LDO6_VOUT (0x0F)
|
||||
#define PM800_LDO7_VOUT (0x10)
|
||||
#define PM800_LDO8_VOUT (0x11)
|
||||
#define PM800_LDO9_VOUT (0x12)
|
||||
#define PM800_LDO10_VOUT (0x13)
|
||||
#define PM800_LDO11_VOUT (0x14)
|
||||
#define PM800_LDO12_VOUT (0x15)
|
||||
#define PM800_LDO13_VOUT (0x16)
|
||||
#define PM800_LDO14_VOUT (0x17)
|
||||
#define PM800_LDO15_VOUT (0x18)
|
||||
#define PM800_LDO16_VOUT (0x19)
|
||||
#define PM800_LDO17_VOUT (0x1A)
|
||||
#define PM800_LDO18_VOUT (0x1B)
|
||||
#define PM800_LDO19_VOUT (0x1C)
|
||||
|
||||
/* BUCK1 with DVC[0..3] */
|
||||
#define PM800_BUCK1 (0x3C)
|
||||
#define PM800_BUCK1_1 (0x3D)
|
||||
#define PM800_BUCK1_2 (0x3E)
|
||||
#define PM800_BUCK1_3 (0x3F)
|
||||
#define PM800_BUCK2 (0x40)
|
||||
#define PM800_BUCK3 (0x41)
|
||||
#define PM800_BUCK3 (0x41)
|
||||
#define PM800_BUCK4 (0x42)
|
||||
#define PM800_BUCK4_1 (0x43)
|
||||
#define PM800_BUCK4_2 (0x44)
|
||||
#define PM800_BUCK4_3 (0x45)
|
||||
#define PM800_BUCK5 (0x46)
|
||||
|
||||
#define PM800_BUCK_ENA (0x50)
|
||||
#define PM800_LDO_ENA1_1 (0x51)
|
||||
#define PM800_LDO_ENA1_2 (0x52)
|
||||
#define PM800_LDO_ENA1_3 (0x53)
|
||||
|
||||
#define PM800_LDO_ENA2_1 (0x56)
|
||||
#define PM800_LDO_ENA2_2 (0x57)
|
||||
#define PM800_LDO_ENA2_3 (0x58)
|
||||
|
||||
#define PM800_BUCK1_MISC1 (0x78)
|
||||
#define PM800_BUCK3_MISC1 (0x7E)
|
||||
#define PM800_BUCK4_MISC1 (0x81)
|
||||
#define PM800_BUCK5_MISC1 (0x84)
|
||||
|
||||
struct pm800_regulator_info {
|
||||
struct regulator_desc desc;
|
||||
int max_ua;
|
||||
};
|
||||
|
||||
struct pm800_regulators {
|
||||
struct regulator_dev *regulators[PM800_ID_RG_MAX];
|
||||
struct pm80x_chip *chip;
|
||||
struct regmap *map;
|
||||
};
|
||||
|
||||
/*
|
||||
* vreg - the buck regs string.
|
||||
* ereg - the string for the enable register.
|
||||
* ebit - the bit number in the enable register.
|
||||
* amax - the current
|
||||
* Buck has 2 kinds of voltage steps. It is easy to find voltage by ranges,
|
||||
* not the constant voltage table.
|
||||
*/
|
||||
#define PM800_BUCK(vreg, ereg, ebit, amax, volt_ranges) \
|
||||
{ \
|
||||
.desc = { \
|
||||
.name = #vreg, \
|
||||
.ops = &pm800_volt_range_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.id = PM800_ID_##vreg, \
|
||||
.owner = THIS_MODULE, \
|
||||
.linear_ranges = volt_ranges, \
|
||||
.n_linear_ranges = ARRAY_SIZE(volt_ranges), \
|
||||
.vsel_reg = PM800_##vreg, \
|
||||
.vsel_mask = 0x7f, \
|
||||
.enable_reg = PM800_##ereg, \
|
||||
.enable_mask = 1 << (ebit), \
|
||||
}, \
|
||||
.max_ua = (amax), \
|
||||
}
|
||||
|
||||
/*
|
||||
* vreg - the LDO regs string
|
||||
* ereg - the string for the enable register.
|
||||
* ebit - the bit number in the enable register.
|
||||
* amax - the current
|
||||
* volt_table - the LDO voltage table
|
||||
* For all the LDOes, there are too many ranges. Using volt_table will be
|
||||
* simpler and faster.
|
||||
*/
|
||||
#define PM800_LDO(vreg, ereg, ebit, amax, ldo_volt_table) \
|
||||
{ \
|
||||
.desc = { \
|
||||
.name = #vreg, \
|
||||
.ops = &pm800_volt_table_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.id = PM800_ID_##vreg, \
|
||||
.owner = THIS_MODULE, \
|
||||
.n_voltages = ARRAY_SIZE(ldo_volt_table), \
|
||||
.vsel_reg = PM800_##vreg##_VOUT, \
|
||||
.vsel_mask = 0x1f, \
|
||||
.enable_reg = PM800_##ereg, \
|
||||
.enable_mask = 1 << (ebit), \
|
||||
.volt_table = ldo_volt_table, \
|
||||
}, \
|
||||
.max_ua = (amax), \
|
||||
}
|
||||
|
||||
/* Ranges are sorted in ascending order. */
|
||||
static const struct regulator_linear_range buck1_volt_range[] = {
|
||||
{ .min_uV = 600000, .max_uV = 1587500, .min_sel = 0, .max_sel = 0x4f,
|
||||
.uV_step = 12500 },
|
||||
{ .min_uV = 1600000, .max_uV = 1800000, .min_sel = 0x50,
|
||||
.max_sel = 0x54, .uV_step = 50000 },
|
||||
};
|
||||
|
||||
/* BUCK 2~5 have same ranges. */
|
||||
static const struct regulator_linear_range buck2_5_volt_range[] = {
|
||||
{ .min_uV = 600000, .max_uV = 1587500, .min_sel = 0, .max_sel = 0x4f,
|
||||
.uV_step = 12500 },
|
||||
{ .min_uV = 1600000, .max_uV = 3300000, .min_sel = 0x50,
|
||||
.max_sel = 0x72, .uV_step = 50000 },
|
||||
};
|
||||
|
||||
static const unsigned int ldo1_volt_table[] = {
|
||||
600000, 650000, 700000, 750000, 800000, 850000, 900000, 950000,
|
||||
1000000, 1050000, 1100000, 1150000, 1200000, 1300000, 1400000, 1500000,
|
||||
};
|
||||
|
||||
static const unsigned int ldo2_volt_table[] = {
|
||||
1700000, 1800000, 1900000, 2000000, 2100000, 2500000, 2700000, 2800000,
|
||||
};
|
||||
|
||||
/* LDO 3~17 have same voltage table. */
|
||||
static const unsigned int ldo3_17_volt_table[] = {
|
||||
1200000, 1250000, 1700000, 1800000, 1850000, 1900000, 2500000, 2600000,
|
||||
2700000, 2750000, 2800000, 2850000, 2900000, 3000000, 3100000, 3300000,
|
||||
};
|
||||
|
||||
/* LDO 18~19 have same voltage table. */
|
||||
static const unsigned int ldo18_19_volt_table[] = {
|
||||
1700000, 1800000, 1900000, 2500000, 2800000, 2900000, 3100000, 3300000,
|
||||
};
|
||||
|
||||
static int pm800_get_current_limit(struct regulator_dev *rdev)
|
||||
{
|
||||
struct pm800_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
|
||||
return info->max_ua;
|
||||
}
|
||||
|
||||
static struct regulator_ops pm800_volt_range_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear_range,
|
||||
.map_voltage = regulator_map_voltage_linear_range,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.get_current_limit = pm800_get_current_limit,
|
||||
};
|
||||
|
||||
static struct regulator_ops pm800_volt_table_ops = {
|
||||
.list_voltage = regulator_list_voltage_table,
|
||||
.map_voltage = regulator_map_voltage_iterate,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.get_current_limit = pm800_get_current_limit,
|
||||
};
|
||||
|
||||
/* The array is indexed by id(PM800_ID_XXX) */
|
||||
static struct pm800_regulator_info pm800_regulator_info[] = {
|
||||
PM800_BUCK(BUCK1, BUCK_ENA, 0, 3000000, buck1_volt_range),
|
||||
PM800_BUCK(BUCK2, BUCK_ENA, 1, 1200000, buck2_5_volt_range),
|
||||
PM800_BUCK(BUCK3, BUCK_ENA, 2, 1200000, buck2_5_volt_range),
|
||||
PM800_BUCK(BUCK4, BUCK_ENA, 3, 1200000, buck2_5_volt_range),
|
||||
PM800_BUCK(BUCK5, BUCK_ENA, 4, 1200000, buck2_5_volt_range),
|
||||
|
||||
PM800_LDO(LDO1, LDO_ENA1_1, 0, 200000, ldo1_volt_table),
|
||||
PM800_LDO(LDO2, LDO_ENA1_1, 1, 10000, ldo2_volt_table),
|
||||
PM800_LDO(LDO3, LDO_ENA1_1, 2, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO4, LDO_ENA1_1, 3, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO5, LDO_ENA1_1, 4, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO6, LDO_ENA1_1, 5, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO7, LDO_ENA1_1, 6, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO8, LDO_ENA1_1, 7, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO9, LDO_ENA1_2, 0, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO10, LDO_ENA1_2, 1, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO11, LDO_ENA1_2, 2, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO12, LDO_ENA1_2, 3, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO13, LDO_ENA1_2, 4, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO14, LDO_ENA1_2, 5, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO15, LDO_ENA1_2, 6, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO16, LDO_ENA1_2, 7, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO17, LDO_ENA1_3, 0, 300000, ldo3_17_volt_table),
|
||||
PM800_LDO(LDO18, LDO_ENA1_3, 1, 200000, ldo18_19_volt_table),
|
||||
PM800_LDO(LDO19, LDO_ENA1_3, 2, 200000, ldo18_19_volt_table),
|
||||
};
|
||||
|
||||
#define PM800_REGULATOR_OF_MATCH(_name, _id) \
|
||||
[PM800_ID_##_id] = { \
|
||||
.name = #_name, \
|
||||
.driver_data = &pm800_regulator_info[PM800_ID_##_id], \
|
||||
}
|
||||
|
||||
static struct of_regulator_match pm800_regulator_matches[] = {
|
||||
PM800_REGULATOR_OF_MATCH(buck1, BUCK1),
|
||||
PM800_REGULATOR_OF_MATCH(buck2, BUCK2),
|
||||
PM800_REGULATOR_OF_MATCH(buck3, BUCK3),
|
||||
PM800_REGULATOR_OF_MATCH(buck4, BUCK4),
|
||||
PM800_REGULATOR_OF_MATCH(buck5, BUCK5),
|
||||
PM800_REGULATOR_OF_MATCH(ldo1, LDO1),
|
||||
PM800_REGULATOR_OF_MATCH(ldo2, LDO2),
|
||||
PM800_REGULATOR_OF_MATCH(ldo3, LDO3),
|
||||
PM800_REGULATOR_OF_MATCH(ldo4, LDO4),
|
||||
PM800_REGULATOR_OF_MATCH(ldo5, LDO5),
|
||||
PM800_REGULATOR_OF_MATCH(ldo6, LDO6),
|
||||
PM800_REGULATOR_OF_MATCH(ldo7, LDO7),
|
||||
PM800_REGULATOR_OF_MATCH(ldo8, LDO8),
|
||||
PM800_REGULATOR_OF_MATCH(ldo9, LDO9),
|
||||
PM800_REGULATOR_OF_MATCH(ldo10, LDO10),
|
||||
PM800_REGULATOR_OF_MATCH(ldo11, LDO11),
|
||||
PM800_REGULATOR_OF_MATCH(ldo12, LDO12),
|
||||
PM800_REGULATOR_OF_MATCH(ldo13, LDO13),
|
||||
PM800_REGULATOR_OF_MATCH(ldo14, LDO14),
|
||||
PM800_REGULATOR_OF_MATCH(ldo15, LDO15),
|
||||
PM800_REGULATOR_OF_MATCH(ldo16, LDO16),
|
||||
PM800_REGULATOR_OF_MATCH(ldo17, LDO17),
|
||||
PM800_REGULATOR_OF_MATCH(ldo18, LDO18),
|
||||
PM800_REGULATOR_OF_MATCH(ldo19, LDO19),
|
||||
};
|
||||
|
||||
static int pm800_regulator_dt_init(struct platform_device *pdev)
|
||||
{
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
int ret;
|
||||
|
||||
ret = of_regulator_match(&pdev->dev, np,
|
||||
pm800_regulator_matches,
|
||||
ARRAY_SIZE(pm800_regulator_matches));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pm800_regulator_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
|
||||
struct pm80x_platform_data *pdata = pdev->dev.parent->platform_data;
|
||||
struct pm800_regulators *pm800_data;
|
||||
struct pm800_regulator_info *info;
|
||||
struct regulator_config config = { };
|
||||
struct regulator_init_data *init_data;
|
||||
int i, ret;
|
||||
|
||||
if (!pdata || pdata->num_regulators == 0) {
|
||||
if (IS_ENABLED(CONFIG_OF)) {
|
||||
ret = pm800_regulator_dt_init(pdev);
|
||||
if (ret)
|
||||
return ret;
|
||||
} else {
|
||||
return -ENODEV;
|
||||
}
|
||||
} else if (pdata->num_regulators) {
|
||||
/* Check whether num_regulator is valid. */
|
||||
unsigned int count = 0;
|
||||
for (i = 0; pdata->regulators[i]; i++)
|
||||
count++;
|
||||
if (count != pdata->num_regulators)
|
||||
return -EINVAL;
|
||||
} else {
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
pm800_data = devm_kzalloc(&pdev->dev, sizeof(*pm800_data),
|
||||
GFP_KERNEL);
|
||||
if (!pm800_data) {
|
||||
dev_err(&pdev->dev, "Failed to allocate pm800_regualtors");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
pm800_data->map = chip->subchip->regmap_power;
|
||||
pm800_data->chip = chip;
|
||||
|
||||
platform_set_drvdata(pdev, pm800_data);
|
||||
|
||||
for (i = 0; i < PM800_ID_RG_MAX; i++) {
|
||||
if (!pdata || pdata->num_regulators == 0)
|
||||
init_data = pm800_regulator_matches[i].init_data;
|
||||
else
|
||||
init_data = pdata->regulators[i];
|
||||
if (!init_data)
|
||||
continue;
|
||||
info = pm800_regulator_matches[i].driver_data;
|
||||
config.dev = &pdev->dev;
|
||||
config.init_data = init_data;
|
||||
config.driver_data = info;
|
||||
config.regmap = pm800_data->map;
|
||||
|
||||
pm800_data->regulators[i] =
|
||||
regulator_register(&info->desc, &config);
|
||||
if (IS_ERR(pm800_data->regulators[i])) {
|
||||
ret = PTR_ERR(pm800_data->regulators[i]);
|
||||
dev_err(&pdev->dev, "Failed to register %s\n",
|
||||
info->desc.name);
|
||||
|
||||
while (--i >= 0)
|
||||
regulator_unregister(pm800_data->regulators[i]);
|
||||
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pm800_regulator_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct pm800_regulators *pm800_data = platform_get_drvdata(pdev);
|
||||
int i;
|
||||
|
||||
for (i = 0; i < PM800_ID_RG_MAX; i++)
|
||||
regulator_unregister(pm800_data->regulators[i]);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver pm800_regulator_driver = {
|
||||
.driver = {
|
||||
.name = "88pm80x-regulator",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = pm800_regulator_probe,
|
||||
.remove = pm800_regulator_remove,
|
||||
};
|
||||
|
||||
module_platform_driver(pm800_regulator_driver);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("Joseph(Yossi) Hanin <yhanin@marvell.com>");
|
||||
MODULE_DESCRIPTION("Regulator Driver for Marvell 88PM800 PMIC");
|
||||
MODULE_ALIAS("platform:88pm800-regulator");
|
||||
|
|
@ -64,6 +64,16 @@ config REGULATOR_USERSPACE_CONSUMER
|
|||
|
||||
If unsure, say no.
|
||||
|
||||
config REGULATOR_88PM800
|
||||
tristate "Marvell 88PM800 Power regulators"
|
||||
depends on MFD_88PM800=y
|
||||
help
|
||||
This driver supports Marvell 88PM800 voltage regulator chips.
|
||||
It delivers digitally programmable output,
|
||||
the voltage is programmed via I2C interface.
|
||||
It's suitable to support PXA988 chips to control VCC_MAIN and
|
||||
various voltages.
|
||||
|
||||
config REGULATOR_88PM8607
|
||||
bool "Marvell 88PM8607 Power regulators"
|
||||
depends on MFD_88PM860X=y
|
||||
|
|
|
|||
|
|
@ -9,6 +9,7 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
|
|||
obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
|
||||
obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
|
||||
|
||||
obj-$(CONFIG_REGULATOR_88PM800) += 88pm800.o
|
||||
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
|
||||
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
|
||||
|
|
|
|||
Loading…
Reference in a new issue