131 lines
2.3 KiB
INI
131 lines
2.3 KiB
INI
# Example configuration for the M908 mouse
|
|
#
|
|
# 5 different profiles (1-5) are stored on the mouse
|
|
# If a particular option is not specified a default value will be used
|
|
|
|
[profile1]
|
|
# led mode:
|
|
# breathing, rainbow, static, wave, alternating, reactive, flashing, off
|
|
lightmode=static
|
|
# led color
|
|
color=50ff00
|
|
# led brightness level (1-3)
|
|
brightness=2
|
|
# led animation speed (1-8)
|
|
speed=1
|
|
|
|
# scrollspeed (1-3f)
|
|
scrollspeed=1
|
|
|
|
# Each profile has 5 dpi levels (1-5) that can be individually set and enabled/disabled.
|
|
# Set dpiX_enable=0 to disable a particular dpi level.
|
|
# It is not possible to disable all DPI levels, at least one will remain enabled.
|
|
dpi1_enable=0
|
|
dpi2_enable=1
|
|
dpi3_enable=1
|
|
dpi4_enable=1
|
|
dpi5_enable=0
|
|
# There are two formats to specify the DPI:
|
|
# 1. actual DPI: 200-12400 (resolution is 100 (200-6200) or 200 (6400-12400))
|
|
# 2. raw bytecode: 0x[04-8c][00-01]
|
|
# Note: the older DPI format (04-8c) is no longer supported.
|
|
dpi1=200
|
|
dpi2=1000
|
|
dpi3=2000
|
|
dpi4=3000
|
|
dpi5=6200
|
|
|
|
# USB poll rate (125, 250, 500, 1000) Hz
|
|
report_rate=500
|
|
|
|
# Button mapping: there is a total of 20 programmable buttons. keymap.md for full details
|
|
button_left=left
|
|
button_right=right
|
|
button_middle=middle
|
|
button_fire=fire:mouse_left:5:1
|
|
button_dpi_up=dpi+
|
|
button_dpi_down=dpi-
|
|
scroll_up=scroll_up
|
|
scroll_down=scroll_down
|
|
button_1=backward
|
|
button_2=forward
|
|
button_3=macro1
|
|
button_4=dpi-cycle
|
|
button_5=report_rate+
|
|
button_6=report_rate-
|
|
button_7=profile_switch
|
|
button_8=fire:a:5:1
|
|
button_9=a
|
|
button_10=super_l+shift_l+2
|
|
button_11=macro2
|
|
button_12=macro3
|
|
|
|
[profile2]
|
|
lightmode=breathing
|
|
color=5000ff
|
|
brightness=3
|
|
scrollspeed=1
|
|
dpi1=1000
|
|
dpi2=1000
|
|
button_1=backward
|
|
button_2=forward
|
|
|
|
[profile3]
|
|
|
|
[profile4]
|
|
|
|
[profile5]
|
|
|
|
|
|
# Macro definitions
|
|
# Each macro (1-15) is defined in its own section, starting with ";## macro"
|
|
# Each action is prefixed by ";# "
|
|
# A tab ('\t') is used to separate the action from the value
|
|
# There are 4 different possible actions:
|
|
# down (key)
|
|
# up (key)
|
|
# delay (time in 10ms)
|
|
# move_(left/right/up/down) (1-120)
|
|
|
|
;## macro1
|
|
;# down m
|
|
;# up m
|
|
;# down a
|
|
;# up a
|
|
;# down c
|
|
;# up c
|
|
;# down r
|
|
;# up r
|
|
;# down o
|
|
;# up o
|
|
;# down 1
|
|
;# up 1
|
|
|
|
;## macro2
|
|
;# down m
|
|
;# up m
|
|
;# down a
|
|
;# up a
|
|
;# down c
|
|
;# up c
|
|
;# down r
|
|
;# up r
|
|
;# down o
|
|
;# up o
|
|
;# down 2
|
|
;# up 2
|
|
|
|
;## macro3
|
|
;# down m
|
|
;# up m
|
|
;# down a
|
|
;# up a
|
|
;# down c
|
|
;# up c
|
|
;# down r
|
|
;# up r
|
|
;# down o
|
|
;# up o
|
|
;# down 3
|
|
;# up 3
|
|
|