Add M686 example config

examples/example_m686.ini

@@ -0,0 +1,39 @@
+# Example configuration for the M686 mouse
+# If a particular option is not specified a default value will be used
+
+# The M686 has two profiles that can be switched using the 'mode switch' button on the bottom of the mouse.
+# However writing or reading the settings can only be done for the active profile, therefore only profile1 is used in the config.
+[profile1]
+
+# LED mode: off, static, breathing, rainbow (only off and rainbow work)
+lightmode=rainbow
+# LED color (doesnt' work)
+color=00ff00
+# LED brightness: 0-255 (doesn't work)
+brightness=50
+
+# DPI levels
+# valid are 100-16000 in steps of 100
+dpi1=100
+dpi2=3000
+dpi3=4000
+dpi4=6000
+dpi5=16000
+
+# Enable or disable DPI levels
+# On the M686 disabling a level will disable all higher levels as well.
+# e.g. to disable dpi4 and dpi5 uncomment the next line
+# dpi4_enable=0
+
+# Button mapping, currently supported:
+# left, middle, right, forward, back
+# led_toggle, report_rate, default, none
+# dpi-, dpi+, dpi-cycle
+button_left=left
+button_right=right
+button_middle=middle
+button_side_1=forward
+button_side_2=backward
+button_side_3=forward
+button_dpi_up=dpi+
+button_dpi_down=dpi-