3338084ab3
BRCMF_C_UP is the command that asks the firmware to enable RF of dongle. Some firmware initialization steps must be performed during RF is down. Postpone BRCMF_C_UP firing until brcmf_netdev_open get called to ensure firmware have enough time to finish initialization. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
1225 lines
29 KiB
C
1225 lines
29 KiB
C
/*
|
|
* Copyright (c) 2010 Broadcom Corporation
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
|
|
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
|
|
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
|
|
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/mmc/sdio_func.h>
|
|
#include <linux/random.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/hardirq.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/module.h>
|
|
#include <net/cfg80211.h>
|
|
#include <net/rtnetlink.h>
|
|
#include <defs.h>
|
|
#include <brcmu_utils.h>
|
|
#include <brcmu_wifi.h>
|
|
|
|
#include "dhd.h"
|
|
#include "dhd_bus.h"
|
|
#include "dhd_proto.h"
|
|
#include "dhd_dbg.h"
|
|
#include "wl_cfg80211.h"
|
|
|
|
MODULE_AUTHOR("Broadcom Corporation");
|
|
MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN fullmac driver.");
|
|
MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN fullmac cards");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
|
|
|
|
/* Interface control information */
|
|
struct brcmf_if {
|
|
struct brcmf_pub *drvr; /* back pointer to brcmf_pub */
|
|
/* OS/stack specifics */
|
|
struct net_device *ndev;
|
|
struct net_device_stats stats;
|
|
int idx; /* iface idx in dongle */
|
|
u8 mac_addr[ETH_ALEN]; /* assigned MAC address */
|
|
};
|
|
|
|
/* Error bits */
|
|
int brcmf_msg_level = BRCMF_ERROR_VAL;
|
|
module_param(brcmf_msg_level, int, 0);
|
|
|
|
int brcmf_ifname2idx(struct brcmf_pub *drvr, char *name)
|
|
{
|
|
int i = BRCMF_MAX_IFS;
|
|
struct brcmf_if *ifp;
|
|
|
|
if (name == NULL || *name == '\0')
|
|
return 0;
|
|
|
|
while (--i > 0) {
|
|
ifp = drvr->iflist[i];
|
|
if (ifp && !strncmp(ifp->ndev->name, name, IFNAMSIZ))
|
|
break;
|
|
}
|
|
|
|
brcmf_dbg(TRACE, "return idx %d for \"%s\"\n", i, name);
|
|
|
|
return i; /* default - the primary interface */
|
|
}
|
|
|
|
char *brcmf_ifname(struct brcmf_pub *drvr, int ifidx)
|
|
{
|
|
if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) {
|
|
brcmf_dbg(ERROR, "ifidx %d out of range\n", ifidx);
|
|
return "<if_bad>";
|
|
}
|
|
|
|
if (drvr->iflist[ifidx] == NULL) {
|
|
brcmf_dbg(ERROR, "null i/f %d\n", ifidx);
|
|
return "<if_null>";
|
|
}
|
|
|
|
if (drvr->iflist[ifidx]->ndev)
|
|
return drvr->iflist[ifidx]->ndev->name;
|
|
|
|
return "<if_none>";
|
|
}
|
|
|
|
static void _brcmf_set_multicast_list(struct work_struct *work)
|
|
{
|
|
struct net_device *ndev;
|
|
struct netdev_hw_addr *ha;
|
|
u32 dcmd_value, cnt;
|
|
__le32 cnt_le;
|
|
__le32 dcmd_le_value;
|
|
|
|
struct brcmf_dcmd dcmd;
|
|
char *buf, *bufp;
|
|
uint buflen;
|
|
int ret;
|
|
|
|
struct brcmf_pub *drvr = container_of(work, struct brcmf_pub,
|
|
multicast_work);
|
|
|
|
ndev = drvr->iflist[0]->ndev;
|
|
cnt = netdev_mc_count(ndev);
|
|
|
|
/* Determine initial value of allmulti flag */
|
|
dcmd_value = (ndev->flags & IFF_ALLMULTI) ? true : false;
|
|
|
|
/* Send down the multicast list first. */
|
|
|
|
buflen = sizeof("mcast_list") + sizeof(cnt) + (cnt * ETH_ALEN);
|
|
bufp = buf = kmalloc(buflen, GFP_ATOMIC);
|
|
if (!bufp)
|
|
return;
|
|
|
|
strcpy(bufp, "mcast_list");
|
|
bufp += strlen("mcast_list") + 1;
|
|
|
|
cnt_le = cpu_to_le32(cnt);
|
|
memcpy(bufp, &cnt_le, sizeof(cnt));
|
|
bufp += sizeof(cnt_le);
|
|
|
|
netdev_for_each_mc_addr(ha, ndev) {
|
|
if (!cnt)
|
|
break;
|
|
memcpy(bufp, ha->addr, ETH_ALEN);
|
|
bufp += ETH_ALEN;
|
|
cnt--;
|
|
}
|
|
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
dcmd.cmd = BRCMF_C_SET_VAR;
|
|
dcmd.buf = buf;
|
|
dcmd.len = buflen;
|
|
dcmd.set = true;
|
|
|
|
ret = brcmf_proto_dcmd(drvr, 0, &dcmd, dcmd.len);
|
|
if (ret < 0) {
|
|
brcmf_dbg(ERROR, "%s: set mcast_list failed, cnt %d\n",
|
|
brcmf_ifname(drvr, 0), cnt);
|
|
dcmd_value = cnt ? true : dcmd_value;
|
|
}
|
|
|
|
kfree(buf);
|
|
|
|
/* Now send the allmulti setting. This is based on the setting in the
|
|
* net_device flags, but might be modified above to be turned on if we
|
|
* were trying to set some addresses and dongle rejected it...
|
|
*/
|
|
|
|
buflen = sizeof("allmulti") + sizeof(dcmd_value);
|
|
buf = kmalloc(buflen, GFP_ATOMIC);
|
|
if (!buf)
|
|
return;
|
|
|
|
dcmd_le_value = cpu_to_le32(dcmd_value);
|
|
|
|
if (!brcmf_c_mkiovar
|
|
("allmulti", (void *)&dcmd_le_value,
|
|
sizeof(dcmd_le_value), buf, buflen)) {
|
|
brcmf_dbg(ERROR, "%s: mkiovar failed for allmulti, datalen %d buflen %u\n",
|
|
brcmf_ifname(drvr, 0),
|
|
(int)sizeof(dcmd_value), buflen);
|
|
kfree(buf);
|
|
return;
|
|
}
|
|
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
dcmd.cmd = BRCMF_C_SET_VAR;
|
|
dcmd.buf = buf;
|
|
dcmd.len = buflen;
|
|
dcmd.set = true;
|
|
|
|
ret = brcmf_proto_dcmd(drvr, 0, &dcmd, dcmd.len);
|
|
if (ret < 0) {
|
|
brcmf_dbg(ERROR, "%s: set allmulti %d failed\n",
|
|
brcmf_ifname(drvr, 0),
|
|
le32_to_cpu(dcmd_le_value));
|
|
}
|
|
|
|
kfree(buf);
|
|
|
|
/* Finally, pick up the PROMISC flag as well, like the NIC
|
|
driver does */
|
|
|
|
dcmd_value = (ndev->flags & IFF_PROMISC) ? true : false;
|
|
dcmd_le_value = cpu_to_le32(dcmd_value);
|
|
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
dcmd.cmd = BRCMF_C_SET_PROMISC;
|
|
dcmd.buf = &dcmd_le_value;
|
|
dcmd.len = sizeof(dcmd_le_value);
|
|
dcmd.set = true;
|
|
|
|
ret = brcmf_proto_dcmd(drvr, 0, &dcmd, dcmd.len);
|
|
if (ret < 0) {
|
|
brcmf_dbg(ERROR, "%s: set promisc %d failed\n",
|
|
brcmf_ifname(drvr, 0),
|
|
le32_to_cpu(dcmd_le_value));
|
|
}
|
|
}
|
|
|
|
static void
|
|
_brcmf_set_mac_address(struct work_struct *work)
|
|
{
|
|
char buf[32];
|
|
struct brcmf_dcmd dcmd;
|
|
int ret;
|
|
|
|
struct brcmf_pub *drvr = container_of(work, struct brcmf_pub,
|
|
setmacaddr_work);
|
|
|
|
brcmf_dbg(TRACE, "enter\n");
|
|
if (!brcmf_c_mkiovar("cur_etheraddr", (char *)drvr->macvalue,
|
|
ETH_ALEN, buf, 32)) {
|
|
brcmf_dbg(ERROR, "%s: mkiovar failed for cur_etheraddr\n",
|
|
brcmf_ifname(drvr, 0));
|
|
return;
|
|
}
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
dcmd.cmd = BRCMF_C_SET_VAR;
|
|
dcmd.buf = buf;
|
|
dcmd.len = 32;
|
|
dcmd.set = true;
|
|
|
|
ret = brcmf_proto_dcmd(drvr, 0, &dcmd, dcmd.len);
|
|
if (ret < 0)
|
|
brcmf_dbg(ERROR, "%s: set cur_etheraddr failed\n",
|
|
brcmf_ifname(drvr, 0));
|
|
else
|
|
memcpy(drvr->iflist[0]->ndev->dev_addr,
|
|
drvr->macvalue, ETH_ALEN);
|
|
|
|
return;
|
|
}
|
|
|
|
static int brcmf_netdev_set_mac_address(struct net_device *ndev, void *addr)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct sockaddr *sa = (struct sockaddr *)addr;
|
|
|
|
memcpy(&drvr->macvalue, sa->sa_data, ETH_ALEN);
|
|
schedule_work(&drvr->setmacaddr_work);
|
|
return 0;
|
|
}
|
|
|
|
static void brcmf_netdev_set_multicast_list(struct net_device *ndev)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
|
|
schedule_work(&drvr->multicast_work);
|
|
}
|
|
|
|
int brcmf_sendpkt(struct brcmf_pub *drvr, int ifidx, struct sk_buff *pktbuf)
|
|
{
|
|
/* Reject if down */
|
|
if (!drvr->bus_if->drvr_up || (drvr->bus_if->state == BRCMF_BUS_DOWN))
|
|
return -ENODEV;
|
|
|
|
/* Update multicast statistic */
|
|
if (pktbuf->len >= ETH_ALEN) {
|
|
u8 *pktdata = (u8 *) (pktbuf->data);
|
|
struct ethhdr *eh = (struct ethhdr *)pktdata;
|
|
|
|
if (is_multicast_ether_addr(eh->h_dest))
|
|
drvr->tx_multicast++;
|
|
if (ntohs(eh->h_proto) == ETH_P_PAE)
|
|
atomic_inc(&drvr->pend_8021x_cnt);
|
|
}
|
|
|
|
/* If the protocol uses a data header, apply it */
|
|
brcmf_proto_hdrpush(drvr, ifidx, pktbuf);
|
|
|
|
/* Use bus module to send data frame */
|
|
return drvr->bus_if->brcmf_bus_txdata(drvr->dev, pktbuf);
|
|
}
|
|
|
|
static int brcmf_netdev_start_xmit(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
int ret;
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
/* Reject if down */
|
|
if (!drvr->bus_if->drvr_up ||
|
|
(drvr->bus_if->state == BRCMF_BUS_DOWN)) {
|
|
brcmf_dbg(ERROR, "xmit rejected drvup=%d state=%d\n",
|
|
drvr->bus_if->drvr_up,
|
|
drvr->bus_if->state);
|
|
netif_stop_queue(ndev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!drvr->iflist[ifp->idx]) {
|
|
brcmf_dbg(ERROR, "bad ifidx %d\n", ifp->idx);
|
|
netif_stop_queue(ndev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Make sure there's enough room for any header */
|
|
if (skb_headroom(skb) < drvr->hdrlen) {
|
|
struct sk_buff *skb2;
|
|
|
|
brcmf_dbg(INFO, "%s: insufficient headroom\n",
|
|
brcmf_ifname(drvr, ifp->idx));
|
|
drvr->bus_if->tx_realloc++;
|
|
skb2 = skb_realloc_headroom(skb, drvr->hdrlen);
|
|
dev_kfree_skb(skb);
|
|
skb = skb2;
|
|
if (skb == NULL) {
|
|
brcmf_dbg(ERROR, "%s: skb_realloc_headroom failed\n",
|
|
brcmf_ifname(drvr, ifp->idx));
|
|
ret = -ENOMEM;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
ret = brcmf_sendpkt(drvr, ifp->idx, skb);
|
|
|
|
done:
|
|
if (ret)
|
|
drvr->bus_if->dstats.tx_dropped++;
|
|
else
|
|
drvr->bus_if->dstats.tx_packets++;
|
|
|
|
/* Return ok: we always eat the packet */
|
|
return 0;
|
|
}
|
|
|
|
void brcmf_txflowcontrol(struct device *dev, int ifidx, bool state)
|
|
{
|
|
struct net_device *ndev;
|
|
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
|
|
struct brcmf_pub *drvr = bus_if->drvr;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
ndev = drvr->iflist[ifidx]->ndev;
|
|
if (state == ON)
|
|
netif_stop_queue(ndev);
|
|
else
|
|
netif_wake_queue(ndev);
|
|
}
|
|
|
|
static int brcmf_host_event(struct brcmf_pub *drvr, int *ifidx,
|
|
void *pktdata, struct brcmf_event_msg *event,
|
|
void **data)
|
|
{
|
|
int bcmerror = 0;
|
|
|
|
bcmerror = brcmf_c_host_event(drvr, ifidx, pktdata, event, data);
|
|
if (bcmerror != 0)
|
|
return bcmerror;
|
|
|
|
if (drvr->iflist[*ifidx]->ndev)
|
|
brcmf_cfg80211_event(drvr->iflist[*ifidx]->ndev,
|
|
event, *data);
|
|
|
|
return bcmerror;
|
|
}
|
|
|
|
void brcmf_rx_frame(struct device *dev, int ifidx,
|
|
struct sk_buff_head *skb_list)
|
|
{
|
|
unsigned char *eth;
|
|
uint len;
|
|
void *data;
|
|
struct sk_buff *skb, *pnext;
|
|
struct brcmf_if *ifp;
|
|
struct brcmf_event_msg event;
|
|
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
|
|
struct brcmf_pub *drvr = bus_if->drvr;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
skb_queue_walk_safe(skb_list, skb, pnext) {
|
|
skb_unlink(skb, skb_list);
|
|
|
|
/* Get the protocol, maintain skb around eth_type_trans()
|
|
* The main reason for this hack is for the limitation of
|
|
* Linux 2.4 where 'eth_type_trans' uses the
|
|
* 'net->hard_header_len'
|
|
* to perform skb_pull inside vs ETH_HLEN. Since to avoid
|
|
* coping of the packet coming from the network stack to add
|
|
* BDC, Hardware header etc, during network interface
|
|
* registration
|
|
* we set the 'net->hard_header_len' to ETH_HLEN + extra space
|
|
* required
|
|
* for BDC, Hardware header etc. and not just the ETH_HLEN
|
|
*/
|
|
eth = skb->data;
|
|
len = skb->len;
|
|
|
|
ifp = drvr->iflist[ifidx];
|
|
if (ifp == NULL)
|
|
ifp = drvr->iflist[0];
|
|
|
|
if (!ifp || !ifp->ndev ||
|
|
ifp->ndev->reg_state != NETREG_REGISTERED) {
|
|
brcmu_pkt_buf_free_skb(skb);
|
|
continue;
|
|
}
|
|
|
|
skb->dev = ifp->ndev;
|
|
skb->protocol = eth_type_trans(skb, skb->dev);
|
|
|
|
if (skb->pkt_type == PACKET_MULTICAST)
|
|
bus_if->dstats.multicast++;
|
|
|
|
skb->data = eth;
|
|
skb->len = len;
|
|
|
|
/* Strip header, count, deliver upward */
|
|
skb_pull(skb, ETH_HLEN);
|
|
|
|
/* Process special event packets and then discard them */
|
|
if (ntohs(skb->protocol) == ETH_P_LINK_CTL)
|
|
brcmf_host_event(drvr, &ifidx,
|
|
skb_mac_header(skb),
|
|
&event, &data);
|
|
|
|
if (drvr->iflist[ifidx]) {
|
|
ifp = drvr->iflist[ifidx];
|
|
ifp->ndev->last_rx = jiffies;
|
|
}
|
|
|
|
bus_if->dstats.rx_bytes += skb->len;
|
|
bus_if->dstats.rx_packets++; /* Local count */
|
|
|
|
if (in_interrupt())
|
|
netif_rx(skb);
|
|
else
|
|
/* If the receive is not processed inside an ISR,
|
|
* the softirqd must be woken explicitly to service
|
|
* the NET_RX_SOFTIRQ. In 2.6 kernels, this is handled
|
|
* by netif_rx_ni(), but in earlier kernels, we need
|
|
* to do it manually.
|
|
*/
|
|
netif_rx_ni(skb);
|
|
}
|
|
}
|
|
|
|
void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success)
|
|
{
|
|
uint ifidx;
|
|
struct ethhdr *eh;
|
|
u16 type;
|
|
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
|
|
struct brcmf_pub *drvr = bus_if->drvr;
|
|
|
|
brcmf_proto_hdrpull(dev, &ifidx, txp);
|
|
|
|
eh = (struct ethhdr *)(txp->data);
|
|
type = ntohs(eh->h_proto);
|
|
|
|
if (type == ETH_P_PAE)
|
|
atomic_dec(&drvr->pend_8021x_cnt);
|
|
|
|
}
|
|
|
|
static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_bus *bus_if = ifp->drvr->bus_if;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
/* Copy dongle stats to net device stats */
|
|
ifp->stats.rx_packets = bus_if->dstats.rx_packets;
|
|
ifp->stats.tx_packets = bus_if->dstats.tx_packets;
|
|
ifp->stats.rx_bytes = bus_if->dstats.rx_bytes;
|
|
ifp->stats.tx_bytes = bus_if->dstats.tx_bytes;
|
|
ifp->stats.rx_errors = bus_if->dstats.rx_errors;
|
|
ifp->stats.tx_errors = bus_if->dstats.tx_errors;
|
|
ifp->stats.rx_dropped = bus_if->dstats.rx_dropped;
|
|
ifp->stats.tx_dropped = bus_if->dstats.tx_dropped;
|
|
ifp->stats.multicast = bus_if->dstats.multicast;
|
|
|
|
return &ifp->stats;
|
|
}
|
|
|
|
/* Retrieve current toe component enables, which are kept
|
|
as a bitmap in toe_ol iovar */
|
|
static int brcmf_toe_get(struct brcmf_pub *drvr, int ifidx, u32 *toe_ol)
|
|
{
|
|
struct brcmf_dcmd dcmd;
|
|
__le32 toe_le;
|
|
char buf[32];
|
|
int ret;
|
|
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
|
|
dcmd.cmd = BRCMF_C_GET_VAR;
|
|
dcmd.buf = buf;
|
|
dcmd.len = (uint) sizeof(buf);
|
|
dcmd.set = false;
|
|
|
|
strcpy(buf, "toe_ol");
|
|
ret = brcmf_proto_dcmd(drvr, ifidx, &dcmd, dcmd.len);
|
|
if (ret < 0) {
|
|
/* Check for older dongle image that doesn't support toe_ol */
|
|
if (ret == -EIO) {
|
|
brcmf_dbg(ERROR, "%s: toe not supported by device\n",
|
|
brcmf_ifname(drvr, ifidx));
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
brcmf_dbg(INFO, "%s: could not get toe_ol: ret=%d\n",
|
|
brcmf_ifname(drvr, ifidx), ret);
|
|
return ret;
|
|
}
|
|
|
|
memcpy(&toe_le, buf, sizeof(u32));
|
|
*toe_ol = le32_to_cpu(toe_le);
|
|
return 0;
|
|
}
|
|
|
|
/* Set current toe component enables in toe_ol iovar,
|
|
and set toe global enable iovar */
|
|
static int brcmf_toe_set(struct brcmf_pub *drvr, int ifidx, u32 toe_ol)
|
|
{
|
|
struct brcmf_dcmd dcmd;
|
|
char buf[32];
|
|
int ret;
|
|
__le32 toe_le = cpu_to_le32(toe_ol);
|
|
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
|
|
dcmd.cmd = BRCMF_C_SET_VAR;
|
|
dcmd.buf = buf;
|
|
dcmd.len = (uint) sizeof(buf);
|
|
dcmd.set = true;
|
|
|
|
/* Set toe_ol as requested */
|
|
strcpy(buf, "toe_ol");
|
|
memcpy(&buf[sizeof("toe_ol")], &toe_le, sizeof(u32));
|
|
|
|
ret = brcmf_proto_dcmd(drvr, ifidx, &dcmd, dcmd.len);
|
|
if (ret < 0) {
|
|
brcmf_dbg(ERROR, "%s: could not set toe_ol: ret=%d\n",
|
|
brcmf_ifname(drvr, ifidx), ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Enable toe globally only if any components are enabled. */
|
|
toe_le = cpu_to_le32(toe_ol != 0);
|
|
|
|
strcpy(buf, "toe");
|
|
memcpy(&buf[sizeof("toe")], &toe_le, sizeof(u32));
|
|
|
|
ret = brcmf_proto_dcmd(drvr, ifidx, &dcmd, dcmd.len);
|
|
if (ret < 0) {
|
|
brcmf_dbg(ERROR, "%s: could not set toe: ret=%d\n",
|
|
brcmf_ifname(drvr, ifidx), ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void brcmf_ethtool_get_drvinfo(struct net_device *ndev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
|
|
sprintf(info->driver, KBUILD_MODNAME);
|
|
sprintf(info->version, "%lu", drvr->drv_version);
|
|
sprintf(info->bus_info, "%s", dev_name(drvr->dev));
|
|
}
|
|
|
|
static const struct ethtool_ops brcmf_ethtool_ops = {
|
|
.get_drvinfo = brcmf_ethtool_get_drvinfo,
|
|
};
|
|
|
|
static int brcmf_ethtool(struct brcmf_pub *drvr, void __user *uaddr)
|
|
{
|
|
struct ethtool_drvinfo info;
|
|
char drvname[sizeof(info.driver)];
|
|
u32 cmd;
|
|
struct ethtool_value edata;
|
|
u32 toe_cmpnt, csum_dir;
|
|
int ret;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
/* all ethtool calls start with a cmd word */
|
|
if (copy_from_user(&cmd, uaddr, sizeof(u32)))
|
|
return -EFAULT;
|
|
|
|
switch (cmd) {
|
|
case ETHTOOL_GDRVINFO:
|
|
/* Copy out any request driver name */
|
|
if (copy_from_user(&info, uaddr, sizeof(info)))
|
|
return -EFAULT;
|
|
strncpy(drvname, info.driver, sizeof(info.driver));
|
|
drvname[sizeof(info.driver) - 1] = '\0';
|
|
|
|
/* clear struct for return */
|
|
memset(&info, 0, sizeof(info));
|
|
info.cmd = cmd;
|
|
|
|
/* if requested, identify ourselves */
|
|
if (strcmp(drvname, "?dhd") == 0) {
|
|
sprintf(info.driver, "dhd");
|
|
strcpy(info.version, BRCMF_VERSION_STR);
|
|
}
|
|
|
|
/* otherwise, require dongle to be up */
|
|
else if (!drvr->bus_if->drvr_up) {
|
|
brcmf_dbg(ERROR, "dongle is not up\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* finally, report dongle driver type */
|
|
else if (drvr->iswl)
|
|
sprintf(info.driver, "wl");
|
|
else
|
|
sprintf(info.driver, "xx");
|
|
|
|
sprintf(info.version, "%lu", drvr->drv_version);
|
|
if (copy_to_user(uaddr, &info, sizeof(info)))
|
|
return -EFAULT;
|
|
brcmf_dbg(CTL, "given %*s, returning %s\n",
|
|
(int)sizeof(drvname), drvname, info.driver);
|
|
break;
|
|
|
|
/* Get toe offload components from dongle */
|
|
case ETHTOOL_GRXCSUM:
|
|
case ETHTOOL_GTXCSUM:
|
|
ret = brcmf_toe_get(drvr, 0, &toe_cmpnt);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
csum_dir =
|
|
(cmd == ETHTOOL_GTXCSUM) ? TOE_TX_CSUM_OL : TOE_RX_CSUM_OL;
|
|
|
|
edata.cmd = cmd;
|
|
edata.data = (toe_cmpnt & csum_dir) ? 1 : 0;
|
|
|
|
if (copy_to_user(uaddr, &edata, sizeof(edata)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
/* Set toe offload components in dongle */
|
|
case ETHTOOL_SRXCSUM:
|
|
case ETHTOOL_STXCSUM:
|
|
if (copy_from_user(&edata, uaddr, sizeof(edata)))
|
|
return -EFAULT;
|
|
|
|
/* Read the current settings, update and write back */
|
|
ret = brcmf_toe_get(drvr, 0, &toe_cmpnt);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
csum_dir =
|
|
(cmd == ETHTOOL_STXCSUM) ? TOE_TX_CSUM_OL : TOE_RX_CSUM_OL;
|
|
|
|
if (edata.data != 0)
|
|
toe_cmpnt |= csum_dir;
|
|
else
|
|
toe_cmpnt &= ~csum_dir;
|
|
|
|
ret = brcmf_toe_set(drvr, 0, toe_cmpnt);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* If setting TX checksum mode, tell Linux the new mode */
|
|
if (cmd == ETHTOOL_STXCSUM) {
|
|
if (edata.data)
|
|
drvr->iflist[0]->ndev->features |=
|
|
NETIF_F_IP_CSUM;
|
|
else
|
|
drvr->iflist[0]->ndev->features &=
|
|
~NETIF_F_IP_CSUM;
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcmf_netdev_ioctl_entry(struct net_device *ndev, struct ifreq *ifr,
|
|
int cmd)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
|
|
brcmf_dbg(TRACE, "ifidx %d, cmd 0x%04x\n", ifp->idx, cmd);
|
|
|
|
if (!drvr->iflist[ifp->idx])
|
|
return -1;
|
|
|
|
if (cmd == SIOCETHTOOL)
|
|
return brcmf_ethtool(drvr, ifr->ifr_data);
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/* called only from within this driver. Sends a command to the dongle. */
|
|
s32 brcmf_exec_dcmd(struct net_device *ndev, u32 cmd, void *arg, u32 len)
|
|
{
|
|
struct brcmf_dcmd dcmd;
|
|
s32 err = 0;
|
|
int buflen = 0;
|
|
bool is_set_key_cmd;
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
|
|
memset(&dcmd, 0, sizeof(dcmd));
|
|
dcmd.cmd = cmd;
|
|
dcmd.buf = arg;
|
|
dcmd.len = len;
|
|
|
|
if (dcmd.buf != NULL)
|
|
buflen = min_t(uint, dcmd.len, BRCMF_DCMD_MAXLEN);
|
|
|
|
/* send to dongle (must be up, and wl) */
|
|
if ((drvr->bus_if->state != BRCMF_BUS_DATA)) {
|
|
brcmf_dbg(ERROR, "DONGLE_DOWN\n");
|
|
err = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
if (!drvr->iswl) {
|
|
err = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
/*
|
|
* Intercept BRCMF_C_SET_KEY CMD - serialize M4 send and
|
|
* set key CMD to prevent M4 encryption.
|
|
*/
|
|
is_set_key_cmd = ((dcmd.cmd == BRCMF_C_SET_KEY) ||
|
|
((dcmd.cmd == BRCMF_C_SET_VAR) &&
|
|
!(strncmp("wsec_key", dcmd.buf, 9))) ||
|
|
((dcmd.cmd == BRCMF_C_SET_VAR) &&
|
|
!(strncmp("bsscfg:wsec_key", dcmd.buf, 15))));
|
|
if (is_set_key_cmd)
|
|
brcmf_netdev_wait_pend8021x(ndev);
|
|
|
|
err = brcmf_proto_dcmd(drvr, ifp->idx, &dcmd, buflen);
|
|
|
|
done:
|
|
if (err > 0)
|
|
err = 0;
|
|
|
|
return err;
|
|
}
|
|
|
|
static int brcmf_netdev_stop(struct net_device *ndev)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
brcmf_cfg80211_down(drvr->config);
|
|
if (drvr->bus_if->drvr_up == 0)
|
|
return 0;
|
|
|
|
/* Set state and stop OS transmissions */
|
|
drvr->bus_if->drvr_up = false;
|
|
netif_stop_queue(ndev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcmf_netdev_open(struct net_device *ndev)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct brcmf_bus *bus_if = drvr->bus_if;
|
|
u32 toe_ol;
|
|
s32 ret = 0;
|
|
uint up = 0;
|
|
|
|
brcmf_dbg(TRACE, "ifidx %d\n", ifp->idx);
|
|
|
|
if (ifp->idx == 0) { /* do it only for primary eth0 */
|
|
/* If bus is not ready, can't continue */
|
|
if (bus_if->state != BRCMF_BUS_DATA) {
|
|
brcmf_dbg(ERROR, "failed bus is not ready\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
atomic_set(&drvr->pend_8021x_cnt, 0);
|
|
|
|
memcpy(ndev->dev_addr, drvr->mac, ETH_ALEN);
|
|
|
|
/* Get current TOE mode from dongle */
|
|
if (brcmf_toe_get(drvr, ifp->idx, &toe_ol) >= 0
|
|
&& (toe_ol & TOE_TX_CSUM_OL) != 0)
|
|
drvr->iflist[ifp->idx]->ndev->features |=
|
|
NETIF_F_IP_CSUM;
|
|
else
|
|
drvr->iflist[ifp->idx]->ndev->features &=
|
|
~NETIF_F_IP_CSUM;
|
|
}
|
|
|
|
/* make sure RF is ready for work */
|
|
brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_UP, (char *)&up, sizeof(up));
|
|
|
|
/* Allow transmit calls */
|
|
netif_start_queue(ndev);
|
|
drvr->bus_if->drvr_up = true;
|
|
if (brcmf_cfg80211_up(drvr->config)) {
|
|
brcmf_dbg(ERROR, "failed to bring up cfg80211\n");
|
|
return -1;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct net_device_ops brcmf_netdev_ops_pri = {
|
|
.ndo_open = brcmf_netdev_open,
|
|
.ndo_stop = brcmf_netdev_stop,
|
|
.ndo_get_stats = brcmf_netdev_get_stats,
|
|
.ndo_do_ioctl = brcmf_netdev_ioctl_entry,
|
|
.ndo_start_xmit = brcmf_netdev_start_xmit,
|
|
.ndo_set_mac_address = brcmf_netdev_set_mac_address,
|
|
.ndo_set_rx_mode = brcmf_netdev_set_multicast_list
|
|
};
|
|
|
|
static int brcmf_net_attach(struct brcmf_if *ifp)
|
|
{
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
struct net_device *ndev;
|
|
u8 temp_addr[ETH_ALEN];
|
|
|
|
brcmf_dbg(TRACE, "ifidx %d\n", ifp->idx);
|
|
|
|
ndev = drvr->iflist[ifp->idx]->ndev;
|
|
ndev->netdev_ops = &brcmf_netdev_ops_pri;
|
|
|
|
/*
|
|
* determine mac address to use
|
|
*/
|
|
if (is_valid_ether_addr(ifp->mac_addr))
|
|
memcpy(temp_addr, ifp->mac_addr, ETH_ALEN);
|
|
else
|
|
memcpy(temp_addr, drvr->mac, ETH_ALEN);
|
|
|
|
if (ifp->idx == 1) {
|
|
brcmf_dbg(TRACE, "ACCESS POINT MAC:\n");
|
|
/* ACCESSPOINT INTERFACE CASE */
|
|
temp_addr[0] |= 0X02; /* set bit 2 ,
|
|
- Locally Administered address */
|
|
|
|
}
|
|
ndev->hard_header_len = ETH_HLEN + drvr->hdrlen;
|
|
ndev->ethtool_ops = &brcmf_ethtool_ops;
|
|
|
|
drvr->rxsz = ndev->mtu + ndev->hard_header_len +
|
|
drvr->hdrlen;
|
|
|
|
memcpy(ndev->dev_addr, temp_addr, ETH_ALEN);
|
|
|
|
/* attach to cfg80211 for primary interface */
|
|
if (!ifp->idx) {
|
|
drvr->config = brcmf_cfg80211_attach(ndev, drvr->dev, drvr);
|
|
if (drvr->config == NULL) {
|
|
brcmf_dbg(ERROR, "wl_cfg80211_attach failed\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
if (register_netdev(ndev) != 0) {
|
|
brcmf_dbg(ERROR, "couldn't register the net device\n");
|
|
goto fail;
|
|
}
|
|
|
|
brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
ndev->netdev_ops = NULL;
|
|
return -EBADE;
|
|
}
|
|
|
|
int
|
|
brcmf_add_if(struct device *dev, int ifidx, char *name, u8 *mac_addr)
|
|
{
|
|
struct brcmf_if *ifp;
|
|
struct net_device *ndev;
|
|
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
|
|
struct brcmf_pub *drvr = bus_if->drvr;
|
|
|
|
brcmf_dbg(TRACE, "idx %d\n", ifidx);
|
|
|
|
ifp = drvr->iflist[ifidx];
|
|
/*
|
|
* Delete the existing interface before overwriting it
|
|
* in case we missed the BRCMF_E_IF_DEL event.
|
|
*/
|
|
if (ifp) {
|
|
brcmf_dbg(ERROR, "ERROR: netdev:%s already exists, try free & unregister\n",
|
|
ifp->ndev->name);
|
|
netif_stop_queue(ifp->ndev);
|
|
unregister_netdev(ifp->ndev);
|
|
free_netdev(ifp->ndev);
|
|
drvr->iflist[ifidx] = NULL;
|
|
}
|
|
|
|
/* Allocate netdev, including space for private structure */
|
|
ndev = alloc_netdev(sizeof(struct brcmf_if), name, ether_setup);
|
|
if (!ndev) {
|
|
brcmf_dbg(ERROR, "OOM - alloc_netdev\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ifp = netdev_priv(ndev);
|
|
ifp->ndev = ndev;
|
|
ifp->drvr = drvr;
|
|
drvr->iflist[ifidx] = ifp;
|
|
ifp->idx = ifidx;
|
|
if (mac_addr != NULL)
|
|
memcpy(&ifp->mac_addr, mac_addr, ETH_ALEN);
|
|
|
|
if (brcmf_net_attach(ifp)) {
|
|
brcmf_dbg(ERROR, "brcmf_net_attach failed");
|
|
free_netdev(ifp->ndev);
|
|
drvr->iflist[ifidx] = NULL;
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
brcmf_dbg(TRACE, " ==== pid:%x, net_device for if:%s created ===\n",
|
|
current->pid, ifp->ndev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void brcmf_del_if(struct brcmf_pub *drvr, int ifidx)
|
|
{
|
|
struct brcmf_if *ifp;
|
|
|
|
brcmf_dbg(TRACE, "idx %d\n", ifidx);
|
|
|
|
ifp = drvr->iflist[ifidx];
|
|
if (!ifp) {
|
|
brcmf_dbg(ERROR, "Null interface\n");
|
|
return;
|
|
}
|
|
if (ifp->ndev) {
|
|
if (ifidx == 0) {
|
|
if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) {
|
|
rtnl_lock();
|
|
brcmf_netdev_stop(ifp->ndev);
|
|
rtnl_unlock();
|
|
}
|
|
} else {
|
|
netif_stop_queue(ifp->ndev);
|
|
}
|
|
|
|
unregister_netdev(ifp->ndev);
|
|
drvr->iflist[ifidx] = NULL;
|
|
if (ifidx == 0)
|
|
brcmf_cfg80211_detach(drvr->config);
|
|
free_netdev(ifp->ndev);
|
|
}
|
|
}
|
|
|
|
int brcmf_attach(uint bus_hdrlen, struct device *dev)
|
|
{
|
|
struct brcmf_pub *drvr = NULL;
|
|
int ret = 0;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
/* Allocate primary brcmf_info */
|
|
drvr = kzalloc(sizeof(struct brcmf_pub), GFP_ATOMIC);
|
|
if (!drvr)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&drvr->proto_block);
|
|
|
|
/* Link to bus module */
|
|
drvr->hdrlen = bus_hdrlen;
|
|
drvr->bus_if = dev_get_drvdata(dev);
|
|
drvr->bus_if->drvr = drvr;
|
|
drvr->dev = dev;
|
|
|
|
/* Attach and link in the protocol */
|
|
ret = brcmf_proto_attach(drvr);
|
|
if (ret != 0) {
|
|
brcmf_dbg(ERROR, "brcmf_prot_attach failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
INIT_WORK(&drvr->setmacaddr_work, _brcmf_set_mac_address);
|
|
INIT_WORK(&drvr->multicast_work, _brcmf_set_multicast_list);
|
|
|
|
return ret;
|
|
|
|
fail:
|
|
brcmf_detach(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int brcmf_bus_start(struct device *dev)
|
|
{
|
|
int ret = -1;
|
|
/* Room for "event_msgs" + '\0' + bitvec */
|
|
char iovbuf[BRCMF_EVENTING_MASK_LEN + 12];
|
|
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
|
|
struct brcmf_pub *drvr = bus_if->drvr;
|
|
|
|
brcmf_dbg(TRACE, "\n");
|
|
|
|
/* Bring up the bus */
|
|
ret = bus_if->brcmf_bus_init(dev);
|
|
if (ret != 0) {
|
|
brcmf_dbg(ERROR, "brcmf_sdbrcm_bus_init failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
brcmf_c_mkiovar("event_msgs", drvr->eventmask, BRCMF_EVENTING_MASK_LEN,
|
|
iovbuf, sizeof(iovbuf));
|
|
brcmf_proto_cdc_query_dcmd(drvr, 0, BRCMF_C_GET_VAR, iovbuf,
|
|
sizeof(iovbuf));
|
|
memcpy(drvr->eventmask, iovbuf, BRCMF_EVENTING_MASK_LEN);
|
|
|
|
setbit(drvr->eventmask, BRCMF_E_SET_SSID);
|
|
setbit(drvr->eventmask, BRCMF_E_PRUNE);
|
|
setbit(drvr->eventmask, BRCMF_E_AUTH);
|
|
setbit(drvr->eventmask, BRCMF_E_REASSOC);
|
|
setbit(drvr->eventmask, BRCMF_E_REASSOC_IND);
|
|
setbit(drvr->eventmask, BRCMF_E_DEAUTH_IND);
|
|
setbit(drvr->eventmask, BRCMF_E_DISASSOC_IND);
|
|
setbit(drvr->eventmask, BRCMF_E_DISASSOC);
|
|
setbit(drvr->eventmask, BRCMF_E_JOIN);
|
|
setbit(drvr->eventmask, BRCMF_E_ASSOC_IND);
|
|
setbit(drvr->eventmask, BRCMF_E_PSK_SUP);
|
|
setbit(drvr->eventmask, BRCMF_E_LINK);
|
|
setbit(drvr->eventmask, BRCMF_E_NDIS_LINK);
|
|
setbit(drvr->eventmask, BRCMF_E_MIC_ERROR);
|
|
setbit(drvr->eventmask, BRCMF_E_PMKID_CACHE);
|
|
setbit(drvr->eventmask, BRCMF_E_TXFAIL);
|
|
setbit(drvr->eventmask, BRCMF_E_JOIN_START);
|
|
setbit(drvr->eventmask, BRCMF_E_SCAN_COMPLETE);
|
|
|
|
/* enable dongle roaming event */
|
|
|
|
drvr->pktfilter_count = 1;
|
|
/* Setup filter to allow only unicast */
|
|
drvr->pktfilter[0] = "100 0 0 0 0x01 0x00";
|
|
|
|
/* Bus is ready, do any protocol initialization */
|
|
ret = brcmf_proto_init(drvr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* add primary networking interface */
|
|
ret = brcmf_add_if(dev, 0, "wlan%d", drvr->mac);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* signal bus ready */
|
|
bus_if->state = BRCMF_BUS_DATA;
|
|
return 0;
|
|
}
|
|
|
|
static void brcmf_bus_detach(struct brcmf_pub *drvr)
|
|
{
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
if (drvr) {
|
|
/* Stop the protocol module */
|
|
brcmf_proto_stop(drvr);
|
|
|
|
/* Stop the bus module */
|
|
drvr->bus_if->brcmf_bus_stop(drvr->dev);
|
|
}
|
|
}
|
|
|
|
void brcmf_detach(struct device *dev)
|
|
{
|
|
int i;
|
|
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
|
|
struct brcmf_pub *drvr = bus_if->drvr;
|
|
|
|
brcmf_dbg(TRACE, "Enter\n");
|
|
|
|
|
|
/* make sure primary interface removed last */
|
|
for (i = BRCMF_MAX_IFS-1; i > -1; i--)
|
|
if (drvr->iflist[i])
|
|
brcmf_del_if(drvr, i);
|
|
|
|
brcmf_bus_detach(drvr);
|
|
|
|
if (drvr->prot) {
|
|
cancel_work_sync(&drvr->setmacaddr_work);
|
|
cancel_work_sync(&drvr->multicast_work);
|
|
brcmf_proto_detach(drvr);
|
|
}
|
|
|
|
bus_if->drvr = NULL;
|
|
kfree(drvr);
|
|
}
|
|
|
|
static int brcmf_get_pend_8021x_cnt(struct brcmf_pub *drvr)
|
|
{
|
|
return atomic_read(&drvr->pend_8021x_cnt);
|
|
}
|
|
|
|
#define MAX_WAIT_FOR_8021X_TX 10
|
|
|
|
int brcmf_netdev_wait_pend8021x(struct net_device *ndev)
|
|
{
|
|
struct brcmf_if *ifp = netdev_priv(ndev);
|
|
struct brcmf_pub *drvr = ifp->drvr;
|
|
int timeout = 10 * HZ / 1000;
|
|
int ntimes = MAX_WAIT_FOR_8021X_TX;
|
|
int pend = brcmf_get_pend_8021x_cnt(drvr);
|
|
|
|
while (ntimes && pend) {
|
|
if (pend) {
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
schedule_timeout(timeout);
|
|
set_current_state(TASK_RUNNING);
|
|
ntimes--;
|
|
}
|
|
pend = brcmf_get_pend_8021x_cnt(drvr);
|
|
}
|
|
return pend;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
int brcmf_write_to_file(struct brcmf_pub *drvr, const u8 *buf, int size)
|
|
{
|
|
int ret = 0;
|
|
struct file *fp;
|
|
mm_segment_t old_fs;
|
|
loff_t pos = 0;
|
|
|
|
/* change to KERNEL_DS address limit */
|
|
old_fs = get_fs();
|
|
set_fs(KERNEL_DS);
|
|
|
|
/* open file to write */
|
|
fp = filp_open("/tmp/mem_dump", O_WRONLY | O_CREAT, 0640);
|
|
if (!fp) {
|
|
brcmf_dbg(ERROR, "open file error\n");
|
|
ret = -1;
|
|
goto exit;
|
|
}
|
|
|
|
/* Write buf to file */
|
|
fp->f_op->write(fp, (char __user *)buf, size, &pos);
|
|
|
|
exit:
|
|
/* free buf before return */
|
|
kfree(buf);
|
|
/* close file before return */
|
|
if (fp)
|
|
filp_close(fp, current->files);
|
|
/* restore previous address limit */
|
|
set_fs(old_fs);
|
|
|
|
return ret;
|
|
}
|
|
#endif /* DEBUG */
|
|
|
|
static void brcmf_driver_init(struct work_struct *work)
|
|
{
|
|
#ifdef CONFIG_BRCMFMAC_SDIO
|
|
brcmf_sdio_init();
|
|
#endif
|
|
#ifdef CONFIG_BRCMFMAC_USB
|
|
brcmf_usb_init();
|
|
#endif
|
|
}
|
|
static DECLARE_WORK(brcmf_driver_work, brcmf_driver_init);
|
|
|
|
static int __init brcmfmac_module_init(void)
|
|
{
|
|
if (!schedule_work(&brcmf_driver_work))
|
|
return -EBUSY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit brcmfmac_module_exit(void)
|
|
{
|
|
cancel_work_sync(&brcmf_driver_work);
|
|
|
|
#ifdef CONFIG_BRCMFMAC_SDIO
|
|
brcmf_sdio_exit();
|
|
#endif
|
|
#ifdef CONFIG_BRCMFMAC_USB
|
|
brcmf_usb_exit();
|
|
#endif
|
|
}
|
|
|
|
module_init(brcmfmac_module_init);
|
|
module_exit(brcmfmac_module_exit);
|