fe355b7f1c
Add support to boot from a named saved segment (NSS). Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
373 lines
9.3 KiB
ArmAsm
373 lines
9.3 KiB
ArmAsm
/*
|
|
* arch/s390/kernel/head64.S
|
|
*
|
|
* Copyright (C) IBM Corp. 1999,2006
|
|
*
|
|
* Author(s): Hartmut Penner <hp@de.ibm.com>
|
|
* Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
* Rob van der Heij <rvdhei@iae.nl>
|
|
* Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
*
|
|
*/
|
|
|
|
#
|
|
# startup-code at 0x10000, running in absolute addressing mode
|
|
# this is called either by the ipl loader or directly by PSW restart
|
|
# or linload or SALIPL
|
|
#
|
|
.org 0x10000
|
|
startup:basr %r13,0 # get base
|
|
.LPG0: l %r13,0f-.LPG0(%r13)
|
|
b 0(%r13)
|
|
0: .long startup_continue
|
|
|
|
#
|
|
# params at 10400 (setup.h)
|
|
#
|
|
.org PARMAREA
|
|
.quad 0 # IPL_DEVICE
|
|
.quad 0 # INITRD_START
|
|
.quad 0 # INITRD_SIZE
|
|
|
|
.org COMMAND_LINE
|
|
.byte "root=/dev/ram0 ro"
|
|
.byte 0
|
|
|
|
.org 0x11000
|
|
|
|
startup_continue:
|
|
basr %r13,0 # get base
|
|
.LPG1: sll %r13,1 # remove high order bit
|
|
srl %r13,1
|
|
lhi %r1,1 # mode 1 = esame
|
|
mvi __LC_AR_MODE_ID,1 # set esame flag
|
|
slr %r0,%r0 # set cpuid to zero
|
|
sigp %r1,%r0,0x12 # switch to esame mode
|
|
sam64 # switch to 64 bit mode
|
|
lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
|
|
lg %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
|
|
# move IPL device to lowcore
|
|
mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
|
|
#
|
|
# Setup stack
|
|
#
|
|
larl %r15,init_thread_union
|
|
lg %r14,__TI_task(%r15) # cache current in lowcore
|
|
stg %r14,__LC_CURRENT
|
|
aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
|
|
stg %r15,__LC_KERNEL_STACK # set end of kernel stack
|
|
aghi %r15,-160
|
|
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
|
|
#
|
|
# Save ipl parameters, clear bss memory, initialize storage key for kernel pages,
|
|
# and create a kernel NSS if the SAVESYS= parm is defined
|
|
#
|
|
brasl %r14,startup_init
|
|
# set program check new psw mask
|
|
mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13)
|
|
larl %r1,.Lslowmemdetect # set program check address
|
|
stg %r1,__LC_PGM_NEW_PSW+8
|
|
lghi %r1,0xc
|
|
diag %r0,%r1,0x260 # get memory size of virtual machine
|
|
cgr %r0,%r1 # different? -> old detection routine
|
|
jne .Lslowmemdetect
|
|
larl %r3,ipl_flags
|
|
llgt %r3,0(%r3)
|
|
chi %r3,4 # ipled from an kernel NSS
|
|
je .Lslowmemdetect
|
|
aghi %r1,1 # size is one more than end
|
|
larl %r2,memory_chunk
|
|
stg %r1,8(%r2) # store size of chunk
|
|
|
|
.Lslowmemdetect:
|
|
l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word
|
|
.Lservicecall:
|
|
stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts
|
|
|
|
stctg %r0,%r0,.Lcr-.LPG1(%r13) # get cr0
|
|
la %r1,0x200 # set bit 22
|
|
og %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1
|
|
stg %r1,.Lcr-.LPG1(%r13)
|
|
lctlg %r0,%r0,.Lcr-.LPG1(%r13) # load modified cr0
|
|
|
|
mvc __LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw
|
|
larl %r1,.Lsclph
|
|
stg %r1,__LC_EXT_NEW_PSW+8 # set handler
|
|
|
|
larl %r4,.Lsccb # %r4 is our index for sccb stuff
|
|
lgr %r1,%r4 # our sccb
|
|
.insn rre,0xb2200000,%r2,%r1 # service call
|
|
ipm %r1
|
|
srl %r1,28 # get cc code
|
|
xr %r3,%r3
|
|
chi %r1,3
|
|
be .Lfchunk-.LPG1(%r13) # leave
|
|
chi %r1,2
|
|
be .Lservicecall-.LPG1(%r13)
|
|
lpswe .Lwaitsclp-.LPG1(%r13)
|
|
.Lsclph:
|
|
lh %r1,.Lsccbr-.Lsccb(%r4)
|
|
chi %r1,0x10 # 0x0010 is the sucess code
|
|
je .Lprocsccb # let's process the sccb
|
|
chi %r1,0x1f0
|
|
bne .Lfchunk-.LPG1(%r13) # unhandled error code
|
|
c %r2,.Lrcp-.LPG1(%r13) # Did we try Read SCP forced
|
|
bne .Lfchunk-.LPG1(%r13) # if no, give up
|
|
l %r2,.Lrcp2-.LPG1(%r13) # try with Read SCP
|
|
b .Lservicecall-.LPG1(%r13)
|
|
.Lprocsccb:
|
|
lghi %r1,0
|
|
icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0
|
|
jnz .Lscnd
|
|
lg %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one
|
|
.Lscnd:
|
|
xr %r3,%r3 # same logic
|
|
ic %r3,.Lscpa1-.Lsccb(%r4)
|
|
chi %r3,0x00
|
|
jne .Lcompmem
|
|
l %r3,.Lscpa2-.Lsccb(%r4)
|
|
.Lcompmem:
|
|
mlgr %r2,%r1 # mem in MB on 128-bit
|
|
l %r1,.Lonemb-.LPG1(%r13)
|
|
mlgr %r2,%r1 # mem size in bytes in %r3
|
|
b .Lfchunk-.LPG1(%r13)
|
|
|
|
.align 4
|
|
.Lpmask:
|
|
.byte 0
|
|
.align 8
|
|
.Lcr:
|
|
.quad 0x00 # place holder for cr0
|
|
.Lwaitsclp:
|
|
.quad 0x0102000180000000,.Lsclph
|
|
.Lrcp:
|
|
.int 0x00120001 # Read SCP forced code
|
|
.Lrcp2:
|
|
.int 0x00020001 # Read SCP code
|
|
.Lonemb:
|
|
.int 0x100000
|
|
|
|
.Lfchunk:
|
|
|
|
#
|
|
# find memory chunks.
|
|
#
|
|
larl %r9,memory_chunk # skip tprot loop if diag260
|
|
lg %r9,8(%r9) # memory detection was successful
|
|
ltgr %r9,%r9
|
|
jne .Ldonemem
|
|
|
|
lgr %r9,%r3 # end of mem
|
|
larl %r1,.Lchkmem # set program check address
|
|
stg %r1,__LC_PGM_NEW_PSW+8
|
|
la %r1,1 # test in increments of 128KB
|
|
sllg %r1,%r1,17
|
|
larl %r3,memory_chunk
|
|
slgr %r4,%r4 # set start of chunk to zero
|
|
slgr %r5,%r5 # set end of chunk to zero
|
|
slr %r6,%r6 # set access code to zero
|
|
la %r10,MEMORY_CHUNKS # number of chunks
|
|
.Lloop:
|
|
tprot 0(%r5),0 # test protection of first byte
|
|
ipm %r7
|
|
srl %r7,28
|
|
clr %r6,%r7 # compare cc with last access code
|
|
je .Lsame
|
|
lghi %r8,0 # no program checks
|
|
j .Lsavchk
|
|
.Lsame:
|
|
algr %r5,%r1 # add 128KB to end of chunk
|
|
# no need to check here,
|
|
brc 12,.Lloop # this is the same chunk
|
|
.Lchkmem: # > 16EB or tprot got a program check
|
|
lghi %r8,1 # set program check flag
|
|
.Lsavchk:
|
|
clgr %r4,%r5 # chunk size > 0?
|
|
je .Lchkloop
|
|
stg %r4,0(%r3) # store start address of chunk
|
|
lgr %r0,%r5
|
|
slgr %r0,%r4
|
|
stg %r0,8(%r3) # store size of chunk
|
|
st %r6,20(%r3) # store type of chunk
|
|
la %r3,24(%r3)
|
|
ahi %r10,-1 # update chunk number
|
|
.Lchkloop:
|
|
lr %r6,%r7 # set access code to last cc
|
|
# we got an exception or we're starting a new
|
|
# chunk , we must check if we should
|
|
# still try to find valid memory (if we detected
|
|
# the amount of available storage), and if we
|
|
# have chunks left
|
|
lghi %r4,1
|
|
sllg %r4,%r4,31
|
|
clgr %r5,%r4
|
|
je .Lhsaskip
|
|
xr %r0, %r0
|
|
clgr %r0, %r9 # did we detect memory?
|
|
je .Ldonemem # if not, leave
|
|
chi %r10, 0 # do we have chunks left?
|
|
je .Ldonemem
|
|
.Lhsaskip:
|
|
chi %r8,1 # program check ?
|
|
je .Lpgmchk
|
|
lgr %r4,%r5 # potential new chunk
|
|
algr %r5,%r1 # add 128KB to end of chunk
|
|
j .Llpcnt
|
|
.Lpgmchk:
|
|
algr %r5,%r1 # add 128KB to end of chunk
|
|
lgr %r4,%r5 # potential new chunk
|
|
.Llpcnt:
|
|
clgr %r5,%r9 # should we go on?
|
|
jl .Lloop
|
|
.Ldonemem:
|
|
|
|
larl %r12,machine_flags
|
|
#
|
|
# find out if we have the MVPG instruction
|
|
#
|
|
la %r1,0f-.LPG1(%r13) # set program check address
|
|
stg %r1,__LC_PGM_NEW_PSW+8
|
|
sgr %r0,%r0
|
|
lghi %r1,0
|
|
lghi %r2,0
|
|
mvpg %r1,%r2 # test MVPG instruction
|
|
oi 7(%r12),16 # set MVPG flag
|
|
0:
|
|
|
|
#
|
|
# find out if the diag 0x44 works in 64 bit mode
|
|
#
|
|
la %r1,0f-.LPG1(%r13) # set program check address
|
|
stg %r1,__LC_PGM_NEW_PSW+8
|
|
diag 0,0,0x44 # test diag 0x44
|
|
oi 7(%r12),32 # set diag44 flag
|
|
0:
|
|
|
|
#
|
|
# find out if we have the IDTE instruction
|
|
#
|
|
la %r1,0f-.LPG1(%r13) # set program check address
|
|
stg %r1,__LC_PGM_NEW_PSW+8
|
|
.long 0xb2b10000 # store facility list
|
|
tm 0xc8,0x08 # check bit for clearing-by-ASCE
|
|
bno 0f-.LPG1(%r13)
|
|
lhi %r1,2094
|
|
lhi %r2,0
|
|
.long 0xb98e2001
|
|
oi 7(%r12),0x80 # set IDTE flag
|
|
0:
|
|
|
|
#
|
|
# find out if the diag 0x9c is available
|
|
#
|
|
la %r1,0f-.LPG1(%r13) # set program check address
|
|
stg %r1,__LC_PGM_NEW_PSW+8
|
|
stap __LC_CPUID+4 # store cpu address
|
|
lh %r1,__LC_CPUID+4
|
|
diag %r1,0,0x9c # test diag 0x9c
|
|
oi 6(%r12),1 # set diag9c flag
|
|
0:
|
|
|
|
#
|
|
# find out if we have the MVCOS instruction
|
|
#
|
|
la %r1,0f-.LPG1(%r13) # set program check address
|
|
stg %r1,__LC_PGM_NEW_PSW+8
|
|
.short 0xc800 # mvcos 0(%r0),0(%r0),%r0
|
|
.short 0x0000
|
|
.short 0x0000
|
|
0: tm 0x8f,0x13 # special-operation exception?
|
|
bno 1f-.LPG1(%r13) # if yes, MVCOS is present
|
|
oi 6(%r12),2 # set MVCOS flag
|
|
1:
|
|
|
|
lpswe .Lentry-.LPG1(13) # jump to _stext in primary-space,
|
|
# virtual and never return ...
|
|
.align 16
|
|
.Lentry:.quad 0x0000000180000000,_stext
|
|
.Lctl: .quad 0x04b50002 # cr0: various things
|
|
.quad 0 # cr1: primary space segment table
|
|
.quad .Lduct # cr2: dispatchable unit control table
|
|
.quad 0 # cr3: instruction authorization
|
|
.quad 0 # cr4: instruction authorization
|
|
.quad 0xffffffffffffffff # cr5: primary-aste origin
|
|
.quad 0 # cr6: I/O interrupts
|
|
.quad 0 # cr7: secondary space segment table
|
|
.quad 0 # cr8: access registers translation
|
|
.quad 0 # cr9: tracing off
|
|
.quad 0 # cr10: tracing off
|
|
.quad 0 # cr11: tracing off
|
|
.quad 0 # cr12: tracing off
|
|
.quad 0 # cr13: home space segment table
|
|
.quad 0xc0000000 # cr14: machine check handling off
|
|
.quad 0 # cr15: linkage stack operations
|
|
.Lduct: .long 0,0,0,0,0,0,0,0
|
|
.long 0,0,0,0,0,0,0,0
|
|
.Lpcmsk:.quad 0x0000000180000000
|
|
.L4malign:.quad 0xffffffffffc00000
|
|
.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
|
|
.Lnop: .long 0x07000700
|
|
.Lparmaddr:
|
|
.quad PARMAREA
|
|
|
|
.globl ipl_schib
|
|
ipl_schib:
|
|
.rept 13
|
|
.long 0
|
|
.endr
|
|
|
|
.globl ipl_flags
|
|
ipl_flags:
|
|
.long 0
|
|
.globl ipl_devno
|
|
ipl_devno:
|
|
.word 0
|
|
|
|
.org 0x12000
|
|
.globl s390_readinfo_sccb
|
|
s390_readinfo_sccb:
|
|
.Lsccb:
|
|
.hword 0x1000 # length, one page
|
|
.byte 0x00,0x00,0x00
|
|
.byte 0x80 # variable response bit set
|
|
.Lsccbr:
|
|
.hword 0x00 # response code
|
|
.Lscpincr1:
|
|
.hword 0x00
|
|
.Lscpa1:
|
|
.byte 0x00
|
|
.fill 89,1,0
|
|
.Lscpa2:
|
|
.int 0x00
|
|
.Lscpincr2:
|
|
.quad 0x00
|
|
.fill 3984,1,0
|
|
.org 0x13000
|
|
|
|
#ifdef CONFIG_SHARED_KERNEL
|
|
.org 0x100000
|
|
#endif
|
|
|
|
#
|
|
# startup-code, running in absolute addressing mode
|
|
#
|
|
.globl _stext
|
|
_stext: basr %r13,0 # get base
|
|
.LPG3:
|
|
# check control registers
|
|
stctg %c0,%c15,0(%r15)
|
|
oi 6(%r15),0x40 # enable sigp emergency signal
|
|
oi 4(%r15),0x10 # switch on low address proctection
|
|
lctlg %c0,%c15,0(%r15)
|
|
|
|
lam 0,15,.Laregs-.LPG3(%r13) # load acrs needed by uaccess
|
|
brasl %r14,start_kernel # go to C code
|
|
#
|
|
# We returned from start_kernel ?!? PANIK
|
|
#
|
|
basr %r13,0
|
|
lpswe .Ldw-.(%r13) # load disabled wait psw
|
|
|
|
.align 8
|
|
.Ldw: .quad 0x0002000180000000,0x0000000000000000
|
|
.Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
|