fe03d5ee67
Added support for DVBWorld 2104 and TeVii S650 USB DVB-S2 cards This cards based on cx24116 demodulator. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
616 lines
14 KiB
C
616 lines
14 KiB
C
/* DVB USB framework compliant Linux driver for the
|
|
* DVBWorld DVB-S 2101, 2102, DVB-S2 2104 Card
|
|
*
|
|
* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation, version 2.
|
|
*
|
|
* see Documentation/dvb/README.dvb-usb for more information
|
|
*/
|
|
#include <linux/version.h>
|
|
#include "dw2102.h"
|
|
#include "stv0299.h"
|
|
#include "z0194a.h"
|
|
#include "cx24116.h"
|
|
|
|
#ifndef USB_PID_DW2102
|
|
#define USB_PID_DW2102 0x2102
|
|
#endif
|
|
|
|
#ifndef USB_PID_DW2104
|
|
#define USB_PID_DW2104 0x2104
|
|
#endif
|
|
|
|
#define DW2102_READ_MSG 0
|
|
#define DW2102_WRITE_MSG 1
|
|
|
|
#define REG_1F_SYMBOLRATE_BYTE0 0x1f
|
|
#define REG_20_SYMBOLRATE_BYTE1 0x20
|
|
#define REG_21_SYMBOLRATE_BYTE2 0x21
|
|
/* on my own*/
|
|
#define DW2102_VOLTAGE_CTRL (0x1800)
|
|
#define DW2102_RC_QUERY (0x1a00)
|
|
|
|
struct dw2102_state {
|
|
u32 last_key_pressed;
|
|
};
|
|
struct dw2102_rc_keys {
|
|
u32 keycode;
|
|
u32 event;
|
|
};
|
|
|
|
/* debug */
|
|
static int dvb_usb_dw2102_debug;
|
|
module_param_named(debug, dvb_usb_dw2102_debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer (or-able))." DVB_USB_DEBUG_STATUS);
|
|
|
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
|
|
|
static int dw2102_op_rw(struct usb_device *dev, u8 request, u16 value,
|
|
u16 index, u8 * data, u16 len, int flags)
|
|
{
|
|
int ret;
|
|
u8 u8buf[len];
|
|
|
|
unsigned int pipe = (flags == DW2102_READ_MSG) ?
|
|
usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0);
|
|
u8 request_type = (flags == DW2102_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
|
|
|
|
if (flags == DW2102_WRITE_MSG)
|
|
memcpy(u8buf, data, len);
|
|
ret = usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR,
|
|
value, index , u8buf, len, 2000);
|
|
|
|
if (flags == DW2102_READ_MSG)
|
|
memcpy(data, u8buf, len);
|
|
return ret;
|
|
}
|
|
|
|
/* I2C */
|
|
|
|
static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
|
|
int num)
|
|
{
|
|
struct dvb_usb_device *d = i2c_get_adapdata(adap);
|
|
int i = 0, ret = 0;
|
|
u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0};
|
|
u16 value;
|
|
|
|
if (!d)
|
|
return -ENODEV;
|
|
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
|
return -EAGAIN;
|
|
|
|
switch (num) {
|
|
case 2:
|
|
/* read stv0299 register */
|
|
value = msg[0].buf[0];/* register */
|
|
for (i = 0; i < msg[1].len; i++) {
|
|
value = value + i;
|
|
ret = dw2102_op_rw(d->udev, 0xb5, value, 0,
|
|
buf6, 2, DW2102_READ_MSG);
|
|
msg[1].buf[i] = buf6[0];
|
|
|
|
}
|
|
break;
|
|
case 1:
|
|
switch (msg[0].addr) {
|
|
case 0x68:
|
|
/* write to stv0299 register */
|
|
buf6[0] = 0x2a;
|
|
buf6[1] = msg[0].buf[0];
|
|
buf6[2] = msg[0].buf[1];
|
|
ret = dw2102_op_rw(d->udev, 0xb2, 0, 0,
|
|
buf6, 3, DW2102_WRITE_MSG);
|
|
break;
|
|
case 0x60:
|
|
if (msg[0].flags == 0) {
|
|
/* write to tuner pll */
|
|
buf6[0] = 0x2c;
|
|
buf6[1] = 5;
|
|
buf6[2] = 0xc0;
|
|
buf6[3] = msg[0].buf[0];
|
|
buf6[4] = msg[0].buf[1];
|
|
buf6[5] = msg[0].buf[2];
|
|
buf6[6] = msg[0].buf[3];
|
|
ret = dw2102_op_rw(d->udev, 0xb2, 0, 0,
|
|
buf6, 7, DW2102_WRITE_MSG);
|
|
} else {
|
|
/* read from tuner */
|
|
ret = dw2102_op_rw(d->udev, 0xb5, 0,0,
|
|
buf6, 1, DW2102_READ_MSG);
|
|
msg[0].buf[0] = buf6[0];
|
|
}
|
|
break;
|
|
case (DW2102_RC_QUERY):
|
|
ret = dw2102_op_rw(d->udev, 0xb8, 0, 0,
|
|
buf6, 2, DW2102_READ_MSG);
|
|
msg[0].buf[0] = buf6[0];
|
|
msg[0].buf[1] = buf6[1];
|
|
break;
|
|
case (DW2102_VOLTAGE_CTRL):
|
|
buf6[0] = 0x30;
|
|
buf6[1] = msg[0].buf[0];
|
|
ret = dw2102_op_rw(d->udev, 0xb2, 0, 0,
|
|
buf6, 2, DW2102_WRITE_MSG);
|
|
break;
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&d->i2c_mutex);
|
|
return num;
|
|
}
|
|
|
|
static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
|
|
{
|
|
struct dvb_usb_device *d = i2c_get_adapdata(adap);
|
|
int ret = 0;
|
|
int len, i;
|
|
|
|
if (!d)
|
|
return -ENODEV;
|
|
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
|
return -EAGAIN;
|
|
|
|
switch (num) {
|
|
case 2: {
|
|
/* read */
|
|
/* first write first register number */
|
|
u8 ibuf [msg[1].len + 2], obuf[3];
|
|
obuf[0] = 0xaa;
|
|
obuf[1] = msg[0].len;
|
|
obuf[2] = msg[0].buf[0];
|
|
ret = dw2102_op_rw(d->udev, 0xc2, 0, 0,
|
|
obuf, msg[0].len + 2, DW2102_WRITE_MSG);
|
|
/* second read registers */
|
|
ret = dw2102_op_rw(d->udev, 0xc3, 0xab , 0,
|
|
ibuf, msg[1].len + 2, DW2102_READ_MSG);
|
|
memcpy(msg[1].buf, ibuf + 2, msg[1].len);
|
|
|
|
break;
|
|
}
|
|
case 1:
|
|
switch (msg[0].addr) {
|
|
case 0x55: {
|
|
if (msg[0].buf[0] == 0xf7) {
|
|
/* firmware */
|
|
/* Write in small blocks */
|
|
u8 obuf[19];
|
|
obuf[0] = 0xaa;
|
|
obuf[1] = 0x11;
|
|
obuf[2] = 0xf7;
|
|
len = msg[0].len - 1;
|
|
i = 1;
|
|
do {
|
|
memcpy(obuf + 3, msg[0].buf + i, (len > 16 ? 16 : len));
|
|
ret = dw2102_op_rw(d->udev, 0xc2, 0, 0,
|
|
obuf, (len > 16 ? 16 : len) + 3, DW2102_WRITE_MSG);
|
|
i += 16;
|
|
len -= 16;
|
|
} while (len > 0);
|
|
} else {
|
|
/* write to register */
|
|
u8 obuf[msg[0].len + 2];
|
|
obuf[0] = 0xaa;
|
|
obuf[1] = msg[0].len;
|
|
memcpy(obuf + 2, msg[0].buf, msg[0].len);
|
|
ret = dw2102_op_rw(d->udev, 0xc2, 0, 0,
|
|
obuf, msg[0].len + 2, DW2102_WRITE_MSG);
|
|
}
|
|
break;
|
|
}
|
|
case(DW2102_RC_QUERY): {
|
|
u8 ibuf[2];
|
|
ret = dw2102_op_rw(d->udev, 0xb8, 0, 0,
|
|
ibuf, 2, DW2102_READ_MSG);
|
|
memcpy(msg[0].buf, ibuf , 2);
|
|
break;
|
|
}
|
|
case(DW2102_VOLTAGE_CTRL): {
|
|
u8 obuf[2];
|
|
obuf[0] = 0x30;
|
|
obuf[1] = msg[0].buf[0];
|
|
ret = dw2102_op_rw(d->udev, 0xb2, 0, 0,
|
|
obuf, 2, DW2102_WRITE_MSG);
|
|
break;
|
|
}
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&d->i2c_mutex);
|
|
return num;
|
|
}
|
|
|
|
static u32 dw2102_i2c_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_I2C;
|
|
}
|
|
|
|
static struct i2c_algorithm dw2102_i2c_algo = {
|
|
.master_xfer = dw2102_i2c_transfer,
|
|
.functionality = dw2102_i2c_func,
|
|
};
|
|
|
|
static struct i2c_algorithm dw2104_i2c_algo = {
|
|
.master_xfer = dw2104_i2c_transfer,
|
|
.functionality = dw2102_i2c_func,
|
|
};
|
|
|
|
static int dw2102_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
|
|
{
|
|
int i;
|
|
u8 ibuf[] = {0, 0};
|
|
u8 eeprom[256], eepromline[16];
|
|
|
|
for (i = 0; i < 256; i++) {
|
|
if (dw2102_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW2102_READ_MSG) < 0) {
|
|
err("read eeprom failed.");
|
|
return -1;
|
|
} else {
|
|
eepromline[i%16] = ibuf[0];
|
|
eeprom[i] = ibuf[0];
|
|
}
|
|
if ((i % 16) == 15) {
|
|
deb_xfer("%02x: ", i - 15);
|
|
debug_dump(eepromline, 16, deb_xfer);
|
|
}
|
|
}
|
|
memcpy(mac, eeprom + 8, 6);
|
|
return 0;
|
|
};
|
|
|
|
static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
|
|
{
|
|
static u8 command_13v[1] = {0x00};
|
|
static u8 command_18v[1] = {0x01};
|
|
struct i2c_msg msg[] = {
|
|
{.addr = DW2102_VOLTAGE_CTRL, .flags = 0,
|
|
.buf = command_13v, .len = 1},
|
|
};
|
|
|
|
struct dvb_usb_adapter *udev_adap =
|
|
(struct dvb_usb_adapter *)(fe->dvb->priv);
|
|
if (voltage == SEC_VOLTAGE_18)
|
|
msg[0].buf = command_18v;
|
|
i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
|
|
return 0;
|
|
}
|
|
|
|
static struct cx24116_config dw2104_config = {
|
|
.demod_address = 0x55,
|
|
/*.mpg_clk_pos_pol = 0x01,*/
|
|
};
|
|
|
|
static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
|
|
{
|
|
if ((d->fe = dvb_attach(cx24116_attach, &dw2104_config,
|
|
&d->dev->i2c_adap)) != NULL) {
|
|
d->fe->ops.set_voltage = dw2102_set_voltage;
|
|
info("Attached cx24116!\n");
|
|
return 0;
|
|
}
|
|
return -EIO;
|
|
}
|
|
|
|
static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
|
|
{
|
|
d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config,
|
|
&d->dev->i2c_adap);
|
|
if (d->fe != NULL) {
|
|
d->fe->ops.set_voltage = dw2102_set_voltage;
|
|
info("Attached stv0299!\n");
|
|
return 0;
|
|
}
|
|
return -EIO;
|
|
}
|
|
|
|
static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
dvb_attach(dvb_pll_attach, adap->fe, 0x60,
|
|
&adap->dev->i2c_adap, DVB_PLL_OPERA1);
|
|
return 0;
|
|
}
|
|
|
|
static struct dvb_usb_rc_key dw2102_rc_keys[] = {
|
|
{ 0xf8, 0x0a, KEY_Q }, /*power*/
|
|
{ 0xf8, 0x0c, KEY_M }, /*mute*/
|
|
{ 0xf8, 0x11, KEY_1 },
|
|
{ 0xf8, 0x12, KEY_2 },
|
|
{ 0xf8, 0x13, KEY_3 },
|
|
{ 0xf8, 0x14, KEY_4 },
|
|
{ 0xf8, 0x15, KEY_5 },
|
|
{ 0xf8, 0x16, KEY_6 },
|
|
{ 0xf8, 0x17, KEY_7 },
|
|
{ 0xf8, 0x18, KEY_8 },
|
|
{ 0xf8, 0x19, KEY_9 },
|
|
{ 0xf8, 0x10, KEY_0 },
|
|
{ 0xf8, 0x1c, KEY_PAGEUP }, /*ch+*/
|
|
{ 0xf8, 0x0f, KEY_PAGEDOWN }, /*ch-*/
|
|
{ 0xf8, 0x1a, KEY_O }, /*vol+*/
|
|
{ 0xf8, 0x0e, KEY_Z }, /*vol-*/
|
|
{ 0xf8, 0x04, KEY_R }, /*rec*/
|
|
{ 0xf8, 0x09, KEY_D }, /*fav*/
|
|
{ 0xf8, 0x08, KEY_BACKSPACE }, /*rewind*/
|
|
{ 0xf8, 0x07, KEY_A }, /*fast*/
|
|
{ 0xf8, 0x0b, KEY_P }, /*pause*/
|
|
{ 0xf8, 0x02, KEY_ESC }, /*cancel*/
|
|
{ 0xf8, 0x03, KEY_G }, /*tab*/
|
|
{ 0xf8, 0x00, KEY_UP }, /*up*/
|
|
{ 0xf8, 0x1f, KEY_ENTER }, /*ok*/
|
|
{ 0xf8, 0x01, KEY_DOWN }, /*down*/
|
|
{ 0xf8, 0x05, KEY_C }, /*cap*/
|
|
{ 0xf8, 0x06, KEY_S }, /*stop*/
|
|
{ 0xf8, 0x40, KEY_F }, /*full*/
|
|
{ 0xf8, 0x1e, KEY_W }, /*tvmode*/
|
|
{ 0xf8, 0x1b, KEY_B }, /*recall*/
|
|
|
|
};
|
|
|
|
|
|
|
|
static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
|
|
{
|
|
struct dw2102_state *st = d->priv;
|
|
u8 key[2];
|
|
struct i2c_msg msg[] = {
|
|
{.addr = DW2102_RC_QUERY, .flags = I2C_M_RD, .buf = key,
|
|
.len = 2},
|
|
};
|
|
int i;
|
|
|
|
*state = REMOTE_NO_KEY_PRESSED;
|
|
if (dw2102_i2c_transfer(&d->i2c_adap, msg, 1) == 1) {
|
|
for (i = 0; i < ARRAY_SIZE(dw2102_rc_keys); i++) {
|
|
if (dw2102_rc_keys[i].data == msg[0].buf[0]) {
|
|
*state = REMOTE_KEY_PRESSED;
|
|
*event = dw2102_rc_keys[i].event;
|
|
st->last_key_pressed =
|
|
dw2102_rc_keys[i].event;
|
|
break;
|
|
}
|
|
st->last_key_pressed = 0;
|
|
}
|
|
}
|
|
/* info("key: %x %x\n",key[0],key[1]); */
|
|
return 0;
|
|
}
|
|
|
|
static struct usb_device_id dw2102_table[] = {
|
|
{USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)},
|
|
{USB_DEVICE(USB_VID_CYPRESS, 0x2101)},
|
|
{USB_DEVICE(USB_VID_CYPRESS, 0x2104)},
|
|
{USB_DEVICE(0x9022, 0xd650)},
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, dw2102_table);
|
|
|
|
static int dw2102_load_firmware(struct usb_device *dev,
|
|
const struct firmware *frmwr)
|
|
{
|
|
u8 *b, *p;
|
|
int ret = 0, i;
|
|
u8 reset;
|
|
u8 reset16 [] = {0, 0, 0, 0, 0, 0, 0};
|
|
const struct firmware *fw;
|
|
const char *filename = "dvb-usb-dw2101.fw";
|
|
switch (dev->descriptor.idProduct) {
|
|
case 0x2101:
|
|
ret = request_firmware(&fw, filename, &dev->dev);
|
|
if (ret != 0) {
|
|
err("did not find the firmware file. (%s) "
|
|
"Please see linux/Documentation/dvb/ for more details "
|
|
"on firmware-problems.", filename);
|
|
return ret;
|
|
}
|
|
break;
|
|
default:
|
|
fw = frmwr;
|
|
break;
|
|
}
|
|
info("start downloading DW210X firmware");
|
|
p = kmalloc(fw->size, GFP_KERNEL);
|
|
reset = 1;
|
|
/*stop the CPU*/
|
|
dw2102_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, DW2102_WRITE_MSG);
|
|
dw2102_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, DW2102_WRITE_MSG);
|
|
|
|
if (p != NULL) {
|
|
memcpy(p, fw->data, fw->size);
|
|
for (i = 0; i < fw->size; i += 0x40) {
|
|
b = (u8 *) p + i;
|
|
if (dw2102_op_rw(dev, 0xa0, i, 0, b , 0x40,
|
|
DW2102_WRITE_MSG) != 0x40) {
|
|
err("error while transferring firmware");
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
}
|
|
/* restart the CPU */
|
|
reset = 0;
|
|
if (ret || dw2102_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1,
|
|
DW2102_WRITE_MSG) != 1) {
|
|
err("could not restart the USB controller CPU.");
|
|
ret = -EINVAL;
|
|
}
|
|
if (ret || dw2102_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1,
|
|
DW2102_WRITE_MSG) != 1) {
|
|
err("could not restart the USB controller CPU.");
|
|
ret = -EINVAL;
|
|
}
|
|
/* init registers */
|
|
switch (dev->descriptor.idProduct) {
|
|
case USB_PID_DW2104:
|
|
case 0xd650:
|
|
reset = 1;
|
|
dw2102_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1,
|
|
DW2102_WRITE_MSG);
|
|
reset = 0;
|
|
dw2102_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0,
|
|
DW2102_WRITE_MSG);
|
|
break;
|
|
case USB_PID_DW2102:
|
|
dw2102_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0,
|
|
DW2102_WRITE_MSG);
|
|
dw2102_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2,
|
|
DW2102_READ_MSG);
|
|
break;
|
|
case 0x2101:
|
|
dw2102_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2,
|
|
DW2102_READ_MSG);
|
|
dw2102_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7,
|
|
DW2102_READ_MSG);
|
|
dw2102_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7,
|
|
DW2102_READ_MSG);
|
|
dw2102_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2,
|
|
DW2102_READ_MSG);
|
|
break;
|
|
}
|
|
msleep(100);
|
|
kfree(p);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static struct dvb_usb_device_properties dw2102_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
.usb_ctrl = DEVICE_SPECIFIC,
|
|
.firmware = "dvb-usb-dw2102.fw",
|
|
.size_of_priv = sizeof(struct dw2102_state),
|
|
.no_reconnect = 1,
|
|
|
|
.i2c_algo = &dw2102_i2c_algo,
|
|
.rc_key_map = dw2102_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dw2102_rc_keys),
|
|
.rc_interval = 150,
|
|
.rc_query = dw2102_rc_query,
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x81,
|
|
/* parameter for the MPEG2-data transfer */
|
|
.num_adapters = 1,
|
|
.download_firmware = dw2102_load_firmware,
|
|
.read_mac_address = dw2102_read_mac_address,
|
|
.adapter = {
|
|
{
|
|
.frontend_attach = dw2102_frontend_attach,
|
|
.streaming_ctrl = NULL,
|
|
.tuner_attach = dw2102_tuner_attach,
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 8,
|
|
.endpoint = 0x82,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 4096,
|
|
}
|
|
}
|
|
},
|
|
}
|
|
},
|
|
.num_device_descs = 2,
|
|
.devices = {
|
|
{"DVBWorld DVB-S 2102 USB2.0",
|
|
{&dw2102_table[0], NULL},
|
|
{NULL},
|
|
},
|
|
{"DVBWorld DVB-S 2101 USB2.0",
|
|
{&dw2102_table[1], NULL},
|
|
{NULL},
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct dvb_usb_device_properties dw2104_properties = {
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
|
.usb_ctrl = DEVICE_SPECIFIC,
|
|
.firmware = "dvb-usb-dw2104.fw",
|
|
.size_of_priv = sizeof(struct dw2102_state),
|
|
.no_reconnect = 1,
|
|
|
|
.i2c_algo = &dw2104_i2c_algo,
|
|
.rc_key_map = dw2102_rc_keys,
|
|
.rc_key_map_size = ARRAY_SIZE(dw2102_rc_keys),
|
|
.rc_interval = 150,
|
|
.rc_query = dw2102_rc_query,
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x81,
|
|
/* parameter for the MPEG2-data transfer */
|
|
.num_adapters = 1,
|
|
.download_firmware = dw2102_load_firmware,
|
|
.read_mac_address = dw2102_read_mac_address,
|
|
.adapter = {
|
|
{
|
|
.frontend_attach = dw2104_frontend_attach,
|
|
.streaming_ctrl = NULL,
|
|
/*.tuner_attach = dw2104_tuner_attach,*/
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 8,
|
|
.endpoint = 0x82,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 4096,
|
|
}
|
|
}
|
|
},
|
|
}
|
|
},
|
|
.num_device_descs = 2,
|
|
.devices = {
|
|
{ "DVBWorld DW2104 USB2.0",
|
|
{&dw2102_table[2], NULL},
|
|
{NULL},
|
|
},
|
|
{ "TeVii S650 USB2.0",
|
|
{&dw2102_table[3], NULL},
|
|
{NULL},
|
|
},
|
|
}
|
|
};
|
|
|
|
static int dw2102_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
if (0 == dvb_usb_device_init(intf, &dw2102_properties,
|
|
THIS_MODULE, NULL, adapter_nr) ||
|
|
0 == dvb_usb_device_init(intf, &dw2104_properties,
|
|
THIS_MODULE, NULL, adapter_nr)) {
|
|
return 0;
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static struct usb_driver dw2102_driver = {
|
|
.name = "dw2102",
|
|
.probe = dw2102_probe,
|
|
.disconnect = dvb_usb_device_exit,
|
|
.id_table = dw2102_table,
|
|
};
|
|
|
|
static int __init dw2102_module_init(void)
|
|
{
|
|
int ret = usb_register(&dw2102_driver);
|
|
if (ret)
|
|
err("usb_register failed. Error number %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit dw2102_module_exit(void)
|
|
{
|
|
usb_deregister(&dw2102_driver);
|
|
}
|
|
|
|
module_init(dw2102_module_init);
|
|
module_exit(dw2102_module_exit);
|
|
|
|
MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
|
|
MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104 USB2.0 device");
|
|
MODULE_VERSION("0.1");
|
|
MODULE_LICENSE("GPL");
|