Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/net/Kconfig
Mike Frysinger 5af29f5958 [Blackfin] arch: finish removing remnants of old BF537_PORT_H option of Blackfin EMAC driver 
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
2008-04-24 02:37:27 +08:00

3061 lines
101 KiB
Text
Raw Blame History

#
# Network device configuration
#
menuconfig NETDEVICES
default y if UML
depends on NET
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all.
You'll have to say Y if your computer contains a network card that
you want to use under Linux. If you are going to run SLIP or PPP over
telephone line or null modem cable you need say Y here. Connecting
two machines with parallel ports using PLIP needs this, as well as
AX.25/KISS for sending Internet traffic over amateur radio links.
See also "The Linux Network Administrator's Guide" by Olaf Kirch and
Terry Dawson. Available at <http://www.tldp.org/guides.html>.
If unsure, say Y.
# All the following symbols are dependent on NETDEVICES - do not repeat
# that for each of the symbols.
if NETDEVICES
config NETDEVICES_MULTIQUEUE
bool "Netdevice multiple hardware queue support"
---help---
Say Y here if you want to allow the network stack to use multiple
hardware TX queues on an ethernet device.
Most people will say N here.
config IFB
tristate "Intermediate Functional Block support"
depends on NET_CLS_ACT
---help---
This is an intermediate driver that allows sharing of
resources.
To compile this driver as a module, choose M here: the module
will be called ifb. If you want to use more than one ifb
device at a time, you need to compile this driver as a module.
Instead of 'ifb', the devices will then be called 'ifb0',
'ifb1' etc.
Look at the iproute2 documentation directory for usage etc
config DUMMY
tristate "Dummy net driver support"
---help---
This is essentially a bit-bucket device (i.e. traffic you send to
this device is consigned into oblivion) with a configurable IP
address. It is most commonly used in order to make your currently
inactive SLIP address seem like a real address for local programs.
If you use SLIP or PPP, you might want to say Y here. Since this
thing often comes in handy, the default is Y. It won't enlarge your
kernel either. What a deal. Read about it in the Network
Administrator's Guide, available from
<http://www.tldp.org/docs.html#guide>.
To compile this driver as a module, choose M here: the module
will be called dummy. If you want to use more than one dummy
device at a time, you need to compile this driver as a module.
Instead of 'dummy', the devices will then be called 'dummy0',
'dummy1' etc.
config BONDING
tristate "Bonding driver support"
depends on INET
---help---
Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
Channels together. This is called 'Etherchannel' by Cisco,
'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
The driver supports multiple bonding modes to allow for both high
performance and high availability operation.
Refer to <file:Documentation/networking/bonding.txt> for more
information.
To compile this driver as a module, choose M here: the module
will be called bonding.
config MACVLAN
tristate "MAC-VLAN support (EXPERIMENTAL)"
depends on EXPERIMENTAL
---help---
This allows one to create virtual interfaces that map packets to
or from specific MAC addresses to a particular interface.
Macvlan devices can be added using the "ip" command from the
iproute2 package starting with the iproute2-2.6.23 release:
"ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
To compile this driver as a module, choose M here: the module
will be called macvlan.
config EQUALIZER
tristate "EQL (serial line load balancing) support"
---help---
If you have two serial connections to some other computer (this
usually requires two modems and two telephone lines) and you use
SLIP (the protocol for sending Internet traffic over telephone
lines) or PPP (a better SLIP) on them, you can make them behave like
one double speed connection using this driver. Naturally, this has
to be supported at the other end as well, either with a similar EQL
Linux driver or with a Livingston Portmaster 2e.
Say Y if you want this and read
<file:Documentation/networking/eql.txt>. You may also want to read
section 6.2 of the NET-3-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here: the module
will be called eql. If unsure, say N.
config TUN
tristate "Universal TUN/TAP device driver support"
select CRC32
---help---
TUN/TAP provides packet reception and transmission for user space
programs. It can be viewed as a simple Point-to-Point or Ethernet
device, which instead of receiving packets from a physical media,
receives them from user space program and instead of sending packets
via physical media writes them to the user space program.
When a program opens /dev/net/tun, driver creates and registers
corresponding net device tunX or tapX. After a program closed above
devices, driver will automatically delete tunXX or tapXX device and
all routes corresponding to it.
Please read <file:Documentation/networking/tuntap.txt> for more
information.
To compile this driver as a module, choose M here: the module
will be called tun.
If you don't know what to use this for, you don't need it.
config VETH
tristate "Virtual ethernet pair device"
---help---
This device is a local ethernet tunnel. Devices are created in pairs.
When one end receives the packet it appears on its pair and vice
versa.
config NET_SB1000
tristate "General Instruments Surfboard 1000"
depends on PNP
---help---
This is a driver for the General Instrument (also known as
NextLevel) SURFboard 1000 internal
cable modem. This is an ISA card which is used by a number of cable
TV companies to provide cable modem access. It's a one-way
downstream-only cable modem, meaning that your upstream net link is
provided by your regular phone modem.
At present this driver only compiles as a module, so say M here if
you have this card. The module will be called sb1000. Then read
<file:Documentation/networking/README.sb1000> for information on how
to use this module, as it needs special ppp scripts for establishing
a connection. Further documentation and the necessary scripts can be
found at:
<http://www.jacksonville.net/~fventuri/>
<http://home.adelphia.net/~siglercm/sb1000.html>
<http://linuxpower.cx/~cable/>
If you don't have this card, of course say N.
source "drivers/net/arcnet/Kconfig"
source "drivers/net/phy/Kconfig"
#
# Ethernet
#
menuconfig NET_ETHERNET
bool "Ethernet (10 or 100Mbit)"
depends on !UML
---help---
Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
type of Local Area Network (LAN) in universities and companies.
Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
coaxial cable, linking computers in a chain), 10BASE-T or twisted
pair (10 Mbps over twisted pair cable, linking computers to central
hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
[the 100BASE varieties are also known as Fast Ethernet], and Gigabit
Ethernet (1 Gbps over optical fiber or short copper links).
If your Linux machine will be connected to an Ethernet and you have
an Ethernet network interface card (NIC) installed in your computer,
say Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. You will then also have
to say Y to the driver for your particular NIC.
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Ethernet network cards. If unsure, say N.
if NET_ETHERNET
config MII
tristate "Generic Media Independent Interface device support"
help
Most ethernet controllers have MII transceiver either as an external
or internal device. It is safe to say Y or M here even if your
ethernet card lack MII.
config MACB
tristate "Atmel MACB support"
depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9
select PHYLIB
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
parts. Say Y to include support for the MACB chip.
To compile this driver as a module, choose M here: the module
will be called macb.
source "drivers/net/arm/Kconfig"
config AX88796
tristate "ASIX AX88796 NE2000 clone support"
depends on ARM || MIPS || SUPERH
select CRC32
select MII
help
AX88796 driver, using platform bus to provide
chip detection and resources
config AX88796_93CX6
bool "ASIX AX88796 external 93CX6 eeprom support"
depends on AX88796
select EEPROM_93CX6
help
Select this if your platform comes with an external 93CX6 eeprom.
config MACE
tristate "MACE (Power Mac ethernet) support"
depends on PPC_PMAC && PPC32
select CRC32
help
Power Macintoshes and clones with Ethernet built-in on the
motherboard will usually use a MACE (Medium Access Control for
Ethernet) interface. Say Y to include support for the MACE chip.
To compile this driver as a module, choose M here: the module
will be called mace.
config MACE_AAUI_PORT
bool "Use AAUI port instead of TP by default"
depends on MACE
help
Some Apple machines (notably the Apple Network Server) which use the
MACE ethernet chip have an Apple AUI port (small 15-pin connector),
instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
Y here if you have such a machine. If unsure, say N.
The driver will default to AAUI on ANS anyway, and if you use it as
a module, you can provide the port_aaui=0|1 to force the driver.
config BMAC
tristate "BMAC (G3 ethernet) support"
depends on PPC_PMAC && PPC32
select CRC32
help
Say Y for support of BMAC Ethernet interfaces. These are used on G3
computers.
To compile this driver as a module, choose M here: the module
will be called bmac.
config ARIADNE
tristate "Ariadne support"
depends on ZORRO
help
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
To compile this driver as a module, choose M here: the module
will be called ariadne.
config A2065
tristate "A2065 support"
depends on ZORRO
select CRC32
help
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
say N.
To compile this driver as a module, choose M here: the module
will be called a2065.
config HYDRA
tristate "Hydra support"
depends on ZORRO
select CRC32
help
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
To compile this driver as a module, choose M here: the module
will be called hydra.
config ZORRO8390
tristate "Zorro NS8390-based Ethernet support"
depends on ZORRO
select CRC32
help
This driver is for Zorro Ethernet cards using an NS8390-compatible
chipset, like the Village Tronic Ariadne II and the Individual
Computers X-Surf Ethernet cards. If you have such a card, say Y.
Otherwise, say N.
To compile this driver as a module, choose M here: the module
will be called zorro8390.
config APNE
tristate "PCMCIA NE2000 support"
depends on AMIGA_PCMCIA
select CRC32
help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
To compile this driver as a module, choose M here: the module
will be called apne.
config APOLLO_ELPLUS
tristate "Apollo 3c505 support"
depends on APOLLO
help
Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
If you don't have one made for Apollos, you can use one from a PC,
except that your Apollo won't be able to boot from it (because the
code in the ROM will be for a PC).
config MAC8390
bool "Macintosh NS 8390 based ethernet cards"
depends on MAC
select CRC32
help
If you want to include a driver to support Nubus or LC-PDS
Ethernet cards using an NS8390 chipset or its equivalent, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
depends on MAC
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
Nubus or LC-PDS network (Ethernet) card of this type, say Y and
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. This module will
be called mac89x0.
config MACSONIC
tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
depends on MAC
---help---
Support for NatSemi SONIC based Ethernet devices. This includes
the onboard Ethernet in many Quadras as well as some LC-PDS,
a few Nubus and all known Comm Slot Ethernet cards. If you have
one of these say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. This module will
be called macsonic.
config MACMACE
bool "Macintosh (AV) onboard MACE ethernet"
depends on MAC
select CRC32
help
Support for the onboard AMD 79C940 MACE Ethernet controller used in
the 660AV and 840AV Macintosh. If you have one of these Macintoshes
say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config MVME147_NET
tristate "MVME147 (Lance) Ethernet support"
depends on MVME147
select CRC32
help
Support for the on-board Ethernet interface on the Motorola MVME147
single-board computer. Say Y here to include the
driver for this chip in your kernel.
To compile this driver as a module, choose M here.
config MVME16x_NET
tristate "MVME16x Ethernet support"
depends on MVME16x
help
This is the driver for the Ethernet interface on the Motorola
MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
driver for this chip in your kernel.
To compile this driver as a module, choose M here.
config BVME6000_NET
tristate "BVME6000 Ethernet support"
depends on BVME6000
help
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
in your kernel.
To compile this driver as a module, choose M here.
config ATARILANCE
tristate "Atari Lance support"
depends on ATARI
help
Say Y to include support for several Atari Ethernet adapters based
on the AMD Lance chipset: RieblCard (with or without battery), or
PAMCard VME (also the version by Rhotron, with different addresses).
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
depends on SUN3 || SUN3X
help
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD Lance 10Mbit Ethernet controller on board; say Y
here to compile in the Linux driver for this and enable Ethernet.
General Linux information on the Sun 3 and 3x series (now
discontinued) is at
<http://www.angelfire.com/ca2/tech68k/sun3.html>.
If you're not building a kernel for a Sun 3, say N.
config SUN3_82586
bool "Sun3 on-board Intel 82586 support"
depends on SUN3
help
This driver enables support for the on-board Intel 82586 based
Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
that this driver does not support 82586-based adapters on additional
VME boards.
config HPLANCE
bool "HP on-board LANCE support"
depends on DIO
select CRC32
help
If you want to use the builtin "LANCE" Ethernet controller on an
HP300 machine, say Y here.
config LASI_82596
tristate "Lasi ethernet"
depends on GSC
help
Say Y here to support the builtin Intel 82596 ethernet controller
found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
config SNI_82596
tristate "SNI RM ethernet"
depends on NET_ETHERNET && SNI_RM
help
Say Y here to support the on-board Intel 82596 ethernet controller
built into SNI RM machines.
config KORINA
tristate "Korina (IDT RC32434) Ethernet support"
depends on NET_ETHERNET && MIKROTIK_RB500
help
If you have a Mikrotik RouterBoard 500 or IDT RC32434
based system say Y. Otherwise say N.
config MIPS_JAZZ_SONIC
tristate "MIPS JAZZ onboard SONIC Ethernet support"
depends on MACH_JAZZ
help
This is the driver for the onboard card of MIPS Magnum 4000,
Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
config MIPS_AU1X00_ENET
bool "MIPS AU1000 Ethernet support"
depends on SOC_AU1X00
select PHYLIB
select CRC32
help
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
select CRC32
select MII
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config MIPS_SIM_NET
tristate "MIPS simulator Network device"
depends on MIPS_SIM
help
The MIPSNET device is a simple Ethernet network device which is
emulated by the MIPS Simulator.
If you are not using a MIPSsim or are unsure, say N.
config SGI_O2MACE_ETH
tristate "SGI O2 MACE Fast Ethernet support"
depends on SGI_IP32=y
config STNIC
tristate "National DP83902AV support"
depends on SUPERH
select CRC32
help
Support for cards based on the National Semiconductor DP83902AV
ST-NIC Serial Network Interface Controller for Twisted Pair. This
is a 10Mbit/sec Ethernet controller. Product overview and specs at
<http://www.national.com/pf/DP/DP83902A.html>.
If unsure, say N.
config SUNLANCE
tristate "Sun LANCE support"
depends on SBUS
select CRC32
help
This driver supports the "le" interface present on all 32-bit Sparc
systems, on some older Ultra systems and as an Sbus option. These
cards are based on the AMD Lance chipset, which is better known
via the NE2100 cards.
To compile this driver as a module, choose M here: the module
will be called sunlance.
config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
depends on SBUS || PCI
select CRC32
help
This driver supports the "hme" interface present on most Ultra
systems and as an option on older Sbus systems. This driver supports
both PCI and Sbus devices. This driver also supports the "qfe" quad
100baseT device available in both PCI and Sbus configurations.
To compile this driver as a module, choose M here: the module
will be called sunhme.
config SUNBMAC
tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
depends on SBUS && EXPERIMENTAL
select CRC32
help
This driver supports the "be" interface available as an Sbus option.
This is Sun's older 100baseT Ethernet device.
To compile this driver as a module, choose M here: the module
will be called sunbmac.
config SUNQE
tristate "Sun QuadEthernet support"
depends on SBUS
select CRC32
help
This driver supports the "qe" 10baseT Ethernet device, available as
an Sbus option. Note that this is not the same as Quad FastEthernet
"qfe" which is supported by the Happy Meal driver instead.
To compile this driver as a module, choose M here: the module
will be called sunqe.
config SUNGEM
tristate "Sun GEM support"
depends on PCI
select CRC32
help
Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
<http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
config CASSINI
tristate "Sun Cassini support"
depends on PCI
select CRC32
help
Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
<http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
config SUNVNET
tristate "Sun Virtual Network support"
depends on SUN_LDOMS
help
Support for virtual network devices under Sun Logical Domains.
config NET_VENDOR_3COM
bool "3COM cards"
depends on ISA || EISA || MCA || PCI
help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about 3COM cards. If you say Y, you will be asked for
your specific card in the following questions.
config EL1
tristate "3c501 \"EtherLink\" support"
depends on NET_VENDOR_3COM && ISA
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Also, consider buying a
new card, since the 3c501 is slow, broken, and obsolete: you will
have problems. Some people suggest to ping ("man ping") a nearby
machine every minute ("man cron") when using this card.
To compile this driver as a module, choose M here. The module
will be called 3c501.
config EL2
tristate "3c503 \"EtherLink II\" support"
depends on NET_VENDOR_3COM && ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c503.
config ELPLUS
tristate "3c505 \"EtherLink Plus\" support"
depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
---help---
Information about this network (Ethernet) card can be found in
<file:Documentation/networking/3c505.txt>. If you have a card of
this type, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c505.
config EL16
tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c507.
config EL3
tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
---help---
If you have a network (Ethernet) card belonging to the 3Com
EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
from <http://www.tldp.org/docs.html#howto>.
If your card is not working you may need to use the DOS
setup disk to disable Plug & Play mode, and to select the default
media type.
To compile this driver as a module, choose M here. The module
will be called 3c509.
config 3C515
tristate "3c515 ISA \"Fast EtherLink\""
depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
help
If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
network card, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c515.
config ELMC
tristate "3c523 \"EtherLink/MC\" support"
depends on NET_VENDOR_3COM && MCA_LEGACY
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c523.
config ELMC_II
tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c527.
config VORTEX
tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
depends on NET_VENDOR_3COM && (PCI || EISA)
select MII
---help---
This option enables driver support for a large number of 10Mbps and
10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
"Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
"Boomerang" (EtherLink XL 3c900 or 3c905) PCI
"Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
"Tornado" (3c905) PCI
"Hurricane" (3c555/3cSOHO) PCI
If you have such a card, say Y and read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>. More
specific information is in
<file:Documentation/networking/vortex.txt> and in the comments at
the beginning of <file:drivers/net/3c59x.c>.
To compile this support as a module, choose M here.
config TYPHOON
tristate "3cr990 series \"Typhoon\" support"
depends on NET_VENDOR_3COM && PCI
select CRC32
---help---
This option enables driver support for the 3cr990 series of cards:
3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called typhoon.
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
depends on ISA && ISA_DMA_API
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
of this type.
To compile this driver as a module, choose M here: the module
will be called lance. This is recommended.
config NET_VENDOR_SMC
bool "Western Digital/SMC cards"
depends on ISA || MCA || EISA || MAC
help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Western Digital cards. If you say Y, you will be
asked for your specific card in the following questions.
config WD80x3
tristate "WD80*3 support"
depends on NET_VENDOR_SMC && ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called wd.
config ULTRAMCA
tristate "SMC Ultra MCA support"
depends on NET_VENDOR_SMC && MCA
select CRC32
help
If you have a network (Ethernet) card of this type and are running
an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called smc-mca.
config ULTRA
tristate "SMC Ultra support"
depends on NET_VENDOR_SMC && ISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Important: There have been many reports that, with some motherboards
mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
such as some BusLogic models) causes corruption problems with many
operating systems. The Linux smc-ultra driver has a work-around for
this but keep it in mind if you have such a SCSI card and have
problems.
To compile this driver as a module, choose M here. The module
will be called smc-ultra.
config ULTRA32
tristate "SMC Ultra32 EISA support"
depends on NET_VENDOR_SMC && EISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called smc-ultra32.
config BFIN_MAC
tristate "Blackfin 527/536/537 on-chip mac support"
depends on NET_ETHERNET && (BF527 || BF537 || BF536)
select CRC32
select MII
select PHYLIB
select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
help
This is the driver for blackfin on-chip mac device. Say Y if you want it
compiled into the kernel. This driver is also available as a module
( = code which can be inserted in and removed from the running kernel
whenever you want). The module will be called bfin_mac.
config BFIN_MAC_USE_L1
bool "Use L1 memory for rx/tx packets"
depends on BFIN_MAC && (BF527 || BF537)
default y
help
To get maximum network performance, you should use L1 memory as rx/tx buffers.
Say N here if you want to reserve L1 memory for other uses.
config BFIN_TX_DESC_NUM
int "Number of transmit buffer packets"
depends on BFIN_MAC
range 6 10 if BFIN_MAC_USE_L1
range 10 100
default "10"
help
Set the number of buffer packets used in driver.
config BFIN_RX_DESC_NUM
int "Number of receive buffer packets"
depends on BFIN_MAC
range 20 100 if BFIN_MAC_USE_L1
range 20 800
default "20"
help
Set the number of buffer packets used in driver.
config BFIN_MAC_RMII
bool "RMII PHY Interface (EXPERIMENTAL)"
depends on BFIN_MAC && EXPERIMENTAL
default y if BFIN527_EZKIT
default n if BFIN537_STAMP
help
Use Reduced PHY MII Interface
config SMC9194
tristate "SMC 9194 support"
depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
select CRC32
---help---
This is support for the SMC9xxx based Ethernet cards. Choose this
option if you have a DELL laptop with the docking station, or
another SMC9192/9194 based chipset. Say Y if you want it compiled
into the kernel, and read the file
<file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called smc9194.
config SMC91X
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
SOC_AU1X00 || BLACKFIN || MN10300
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
compiled into the kernel, and read the file
<file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smc91x. If you want to compile it as a
module, say M here and read <file:Documentation/kbuild/modules.txt>.
config NET_NETX
tristate "NetX Ethernet support"
select MII
depends on ARCH_NETX
help
This is support for the Hilscher netX builtin Ethernet ports
To compile this driver as a module, choose M here. The module
will be called netx-eth.
config DM9000
tristate "DM9000 support"
depends on ARM || BLACKFIN || MIPS
select CRC32
select MII
---help---
Support for DM9000 chipset.
To compile this driver as a module, choose M here. The module
will be called dm9000.
config ENC28J60
tristate "ENC28J60 support"
depends on EXPERIMENTAL && SPI && NET_ETHERNET
select CRC32
---help---
Support for the Microchip EN28J60 ethernet chip.
To compile this driver as a module, choose M here. The module will be
called enc28j60.
config ENC28J60_WRITEVERIFY
bool "Enable write verify"
depends on ENC28J60
---help---
Enable the verify after the buffer write useful for debugging purpose.
If unsure, say N.
config DM9000_DEBUGLEVEL
int "DM9000 maximum debug level"
depends on DM9000
default 4
help
The maximum level of debugging code compiled into the DM9000
driver.
config SMC911X
tristate "SMSC LAN911[5678] support"
select CRC32
select MII
depends on ARCH_PXA || SH_MAGIC_PANEL_R2
help
This is a driver for SMSC's LAN911x series of Ethernet chipsets
including the new LAN9115, LAN9116, LAN9117, and LAN9118.
Say Y if you want it compiled into the kernel,
and read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
This driver is also available as a module. The module will be
called smc911x. If you want to compile it as a module, say M
here and read <file:Documentation/kbuild/modules.txt>
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
depends on ISA
help
If you have a network (Ethernet) card belonging to this class, such
as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about NI cards. If you say Y, you will be asked for
your specific card in the following questions.
config NI5010
tristate "NI5010 support (EXPERIMENTAL)"
depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Note that this is still
experimental code.
To compile this driver as a module, choose M here. The module
will be called ni5010.
config NI52
tristate "NI5210 support"
depends on NET_VENDOR_RACAL && ISA
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ni52.
config NI65
tristate "NI6510 support"
depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ni65.
source "drivers/net/tulip/Kconfig"
config AT1700
tristate "AT1700/1720 support (EXPERIMENTAL)"
depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called at1700.
config DEPCA
tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
depends on ISA || EISA || MCA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto> as well as
<file:drivers/net/depca.c>.
To compile this driver as a module, choose M here. The module
will be called depca.
config HP100
tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
depends on ISA || EISA || PCI
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called hp100.
config NET_ISA
bool "Other ISA cards"
depends on ISA
---help---
If your network (Ethernet) card hasn't been mentioned yet and its
bus system (that's the way the cards talks to the other components
of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
Make sure you know the name of your card. Read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
If unsure, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the remaining ISA network card questions. If you say Y, you will be
asked for your specific card in the following questions.
config E2100
tristate "Cabletron E21xx support"
depends on NET_ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called e2100.
config EWRK3
tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
depends on NET_ISA
select CRC32
---help---
This driver supports the DE203, DE204 and DE205 network (Ethernet)
cards. If this is for you, say Y and read
<file:Documentation/networking/ewrk3.txt> in the kernel source as
well as the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ewrk3.
config EEXPRESS
tristate "EtherExpress 16 support"
depends on NET_ISA
---help---
If you have an EtherExpress16 network (Ethernet) card, say Y and
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Note that the Intel
EtherExpress16 card used to be regarded as a very poor choice
because the driver was very unreliable. We now have a new driver
that should do better.
To compile this driver as a module, choose M here. The module
will be called eexpress.
config EEXPRESS_PRO
tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
depends on NET_ISA
---help---
If you have a network (Ethernet) card of this type, say Y. This
driver supports Intel i82595{FX,TX} based boards. Note however
that the EtherExpress PRO/100 Ethernet card has its own separate
driver. Please read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called eepro.
config HPLAN_PLUS
tristate "HP PCLAN+ (27247B and 27252A) support"
depends on NET_ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called hp-plus.
config HPLAN
tristate "HP PCLAN (27245 and other 27xxx series) support"
depends on NET_ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called hp.
config LP486E
tristate "LP486E on board Ethernet"
depends on NET_ISA
help
Say Y here to support the 82596-based on-board Ethernet controller
for the Panther motherboard, which is one of the two shipped in the
Intel Professional Workstation.
config ETH16I
tristate "ICL EtherTeam 16i/32 support"
depends on NET_ISA
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called eth16i.
config NE2000
tristate "NE2000/NE1000 support"
depends on NET_ISA || (Q40 && m) || M32R || TOSHIBA_RBTX4927 || TOSHIBA_RBTX4938
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Many Ethernet cards
without a specific driver are compatible with NE2000.
If you have a PCI NE2000 card however, say N here and Y to "PCI
NE2000 and clone support" under "EISA, VLB, PCI and on board
controllers" below. If you have a NE2000 card and are running on
an MCA system (a bus system used on some IBM PS/2 computers and
laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
below.
To compile this driver as a module, choose M here. The module
will be called ne.
config ZNET
tristate "Zenith Z-Note support (EXPERIMENTAL)"
depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
help
The Zenith Z-Note notebook computer has a built-in network
(Ethernet) card, and this is the Linux driver for it. Note that the
IBM Thinkpad 300 is compatible with the Z-Note and is also supported
by this driver. Read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config SEEQ8005
tristate "SEEQ8005 support (EXPERIMENTAL)"
depends on NET_ISA && EXPERIMENTAL
help
This is a driver for the SEEQ 8005 network (Ethernet) card. If this
is for you, read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called seeq8005.
config NE2_MCA
tristate "NE/2 (ne2000 MCA version) support"
depends on MCA_LEGACY
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ne2.
config IBMLANA
tristate "IBM LAN Adapter/A support"
depends on MCA
---help---
This is a Micro Channel Ethernet adapter. You need to set
CONFIG_MCA to use this driver. It is both available as an in-kernel
driver and as a module.
To compile this driver as a module, choose M here. The only
currently supported card is the IBM LAN Adapter/A for Ethernet. It
will both support 16K and 32K memory windows, however a 32K window
gives a better security against packet losses. Usage of multiple
boards with this driver should be possible, but has not been tested
up to now due to lack of hardware.
config IBMVETH
tristate "IBM LAN Virtual Ethernet support"
depends on PPC_PSERIES
---help---
This driver supports virtual ethernet adapters on newer IBM iSeries
and pSeries systems.
To compile this driver as a module, choose M here. The module will
be called ibmveth.
source "drivers/net/ibm_emac/Kconfig"
source "drivers/net/ibm_newemac/Kconfig"
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
depends on ISA || EISA || PCI
help
This is another class of network cards which attach directly to the
bus. If you have one of those, say Y and read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about this class of network cards. If you say Y, you
will be asked for your specific card in the following questions. If
you are unsure, say Y.
config PCNET32
tristate "AMD PCnet32 PCI support"
depends on NET_PCI && PCI
select CRC32
select MII
help
If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called pcnet32.
config PCNET32_NAPI
bool "Use RX polling (NAPI)"
depends on PCNET32
help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
If your estimated Rx load is 10kpps or more, or if the card will be
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
If in doubt, say N.
config AMD8111_ETH
tristate "AMD 8111 (new PCI lance) support"
depends on NET_PCI && PCI
select CRC32
select MII
help
If you have an AMD 8111-based PCI lance ethernet card,
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called amd8111e.
config AMD8111E_NAPI
bool "Use RX polling (NAPI)"
depends on AMD8111_ETH
help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
If your estimated Rx load is 10kpps or more, or if the card will be
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
If in doubt, say N.
config ADAPTEC_STARFIRE
tristate "Adaptec Starfire/DuraLAN support"
depends on NET_PCI && PCI
select CRC32
select MII
help
Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
adapter. The DuraLAN chip is used on the 64 bit PCI boards from
Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
driver.
To compile this driver as a module, choose M here: the module
will be called starfire. This is recommended.
config ADAPTEC_STARFIRE_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
depends on ADAPTEC_STARFIRE && EXPERIMENTAL
help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
If your estimated Rx load is 10kpps or more, or if the card will be
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
If in doubt, say N.
config AC3200
tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ac3200.
config APRICOT
tristate "Apricot Xen-II on board Ethernet"
depends on NET_PCI && ISA
help
If you have a network (Ethernet) controller of this type, say Y and
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called apricot.
config B44
tristate "Broadcom 440x/47xx ethernet support"
depends on SSB_POSSIBLE
select SSB
select MII
help
If you have a network (Ethernet) controller of this type, say Y
or M and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called b44.
# Auto-select SSB PCI-HOST support, if possible
config B44_PCI_AUTOSELECT
bool
depends on B44 && SSB_PCIHOST_POSSIBLE
select SSB_PCIHOST
default y
# Auto-select SSB PCICORE driver, if possible
config B44_PCICORE_AUTOSELECT
bool
depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
select SSB_DRIVER_PCICORE
default y
config B44_PCI
bool
depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
default y
config FORCEDETH
tristate "nForce Ethernet support"
depends on NET_PCI && PCI
help
If you have a network (Ethernet) controller of this type, say Y and
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called forcedeth.
config FORCEDETH_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
depends on FORCEDETH && EXPERIMENTAL
help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
If your estimated Rx load is 10kpps or more, or if the card will be
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
If in doubt, say N.
config CS89x0
tristate "CS89x0 support"
depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X)
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto> as well as
<file:Documentation/networking/cs89x0.txt>.
To compile this driver as a module, choose M here. The module
will be called cs89x0.
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
depends on NET_PCI && PCI && MIPS
select PHYLIB
config EEPRO100
tristate "EtherExpressPro/100 support (eepro100, original Becker driver)"
depends on NET_PCI && PCI
select MII
help
If you have an Intel EtherExpress PRO/100 PCI network (Ethernet)
card, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called eepro100.
config E100
tristate "Intel(R) PRO/100+ support"
depends on NET_PCI && PCI
select MII
---help---
This driver supports Intel(R) PRO/100 family of adapters.
To verify that your adapter is supported, find the board ID number
on the adapter. Look for a label that has a barcode and a number
in the format 123456-001 (six digits hyphen three digits).
Use the above information and the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
to identify the adapter.
For the latest Intel PRO/100 network driver for Linux, see:
<http://appsr.intel.com/scripts-df/support_intel.asp>
More specific information on configuring the driver is in
<file:Documentation/networking/e100.txt>.
To compile this driver as a module, choose M here. The module
will be called e100.
config LNE390
tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
depends on NET_PCI && EISA && EXPERIMENTAL
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called lne390.
config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support"
depends on NET_PCI && PCI
select CRC32
select MII
help
Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
cards. Specifications and data at
<http://www.myson.com.hk/mtd/datasheet/>.
config NATSEMI
tristate "National Semiconductor DP8381x series PCI Ethernet support"
depends on NET_PCI && PCI
select CRC32
help
This driver is for the National Semiconductor DP83810 series,
which is used in cards from PureData, NetGear, Linksys
and others, including the 83815 chip.
More specific information and updates are available from
<http://www.scyld.com/network/natsemi.html>.
config NE2K_PCI
tristate "PCI NE2000 and clones support (see help)"
depends on NET_PCI && PCI
select CRC32
---help---
This driver is for NE2000 compatible PCI cards. It will not work
with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
support" below). If you have a PCI NE2000 network (Ethernet) card,
say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver also works for the following NE2000 clone cards:
RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
Holtek HT80232 Holtek HT80229
To compile this driver as a module, choose M here. The module
will be called ne2k-pci.
config NE3210
tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
depends on NET_PCI && EISA && EXPERIMENTAL
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Note that this driver
will NOT WORK for NE3200 cards as they are completely different.
To compile this driver as a module, choose M here. The module
will be called ne3210.
config ES3210
tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
depends on NET_PCI && EISA && EXPERIMENTAL
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called es3210.
config 8139CP
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
depends on NET_PCI && PCI && EXPERIMENTAL
select CRC32
select MII
help
This is a driver for the Fast Ethernet PCI network cards based on
the RTL8139C+ chips. If you have one of those, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here: the module
will be called 8139cp. This is recommended.
config 8139TOO
tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
depends on NET_PCI && PCI
select CRC32
select MII
---help---
This is a driver for the Fast Ethernet PCI network cards based on
the RTL 8129/8130/8139 chips. If you have one of those, say Y and
read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here: the module
will be called 8139too. This is recommended.
config 8139TOO_PIO
bool "Use PIO instead of MMIO"
default y
depends on 8139TOO
help
This instructs the driver to use programmed I/O ports (PIO) instead
of PCI shared memory (MMIO). This can possibly solve some problems
in case your mainboard has memory consistency issues. If unsure,
say N.
config 8139TOO_TUNE_TWISTER
bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
depends on 8139TOO
help
This implements a function which might come in handy in case you
are using low quality on long cabling. It is required for RealTek
RTL-8139 revision K boards, and totally unused otherwise. It tries
to match the transceiver to the cable characteristics. This is
experimental since hardly documented by the manufacturer.
If unsure, say Y.
config 8139TOO_8129
bool "Support for older RTL-8129/8130 boards"
depends on 8139TOO
help
This enables support for the older and uncommon RTL-8129 and
RTL-8130 chips, which support MII via an external transceiver,
instead of an internal one. Disabling this option will save some
memory by making the code size smaller. If unsure, say Y.
config 8139_OLD_RX_RESET
bool "Use older RX-reset method"
depends on 8139TOO
help
The 8139too driver was recently updated to contain a more rapid
reset sequence, in the face of severe receive errors. This "new"
RX-reset method should be adequate for all boards. But if you
experience problems, you can enable this option to restore the
old RX-reset behavior. If unsure, say N.
config R6040
tristate "RDC R6040 Fast Ethernet Adapter support (EXPERIMENTAL)"
depends on NET_PCI && PCI
select CRC32
select MII
help
This is a driver for the R6040 Fast Ethernet MACs found in the
the RDC R-321x System-on-chips.
To compile this driver as a module, choose M here: the module
will be called r6040. This is recommended.
config SIS900
tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
depends on NET_PCI && PCI
select CRC32
select MII
---help---
This is a driver for the Fast Ethernet PCI network cards based on
the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
SiS 630 and SiS 540 chipsets.
This driver also supports AMD 79C901 HomePNA so that you can use
your phone line as a network cable.
To compile this driver as a module, choose M here: the module
will be called sis900. This is recommended.
config EPIC100
tristate "SMC EtherPower II"
depends on NET_PCI && PCI
select CRC32
select MII
help
This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
which is based on the SMC83c17x (EPIC/100).
More specific information and updates are available from
<http://www.scyld.com/network/epic100.html>.
config SUNDANCE
tristate "Sundance Alta support"
depends on NET_PCI && PCI
select CRC32
select MII
help
This driver is for the Sundance "Alta" chip.
More specific information and updates are available from
<http://www.scyld.com/network/sundance.html>.
config SUNDANCE_MMIO
bool "Use MMIO instead of PIO"
depends on SUNDANCE
help
Enable memory-mapped I/O for interaction with Sundance NIC registers.
Do NOT enable this by default, PIO (enabled when MMIO is disabled)
is known to solve bugs on certain chips.
If unsure, say N.
config TLAN
tristate "TI ThunderLAN support"
depends on NET_PCI && (PCI || EISA) && !64BIT
---help---
If you have a PCI Ethernet network card based on the ThunderLAN chip
which is supported by this driver, say Y and read the
Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Devices currently supported by this driver are Compaq Netelligent,
Compaq NetFlex and Olicom cards. Please read the file
<file:Documentation/networking/tlan.txt> for more details.
To compile this driver as a module, choose M here. The module
will be called tlan.
Please email feedback to <torben.mathiasen@compaq.com>.
config VIA_RHINE
tristate "VIA Rhine support"
depends on NET_PCI && PCI
select CRC32
select MII
help
If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
Ethernet functions can also be found integrated on South Bridges
(e.g. VT8235).
To compile this driver as a module, choose M here. The module
will be called via-rhine.
config VIA_RHINE_MMIO
bool "Use MMIO instead of PIO"
depends on VIA_RHINE
help
This instructs the driver to use PCI shared memory (MMIO) instead of
programmed I/O ports (PIO). Enabling this gives an improvement in
processing time in parts of the driver.
If unsure, say Y.
config VIA_RHINE_NAPI
bool "Use Rx Polling (NAPI)"
depends on VIA_RHINE
help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card.
If your estimated Rx load is 10kpps or more, or if the card will be
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
config LAN_SAA9730
bool "Philips SAA9730 Ethernet support"
depends on NET_PCI && PCI && MIPS_ATLAS
help
The SAA9730 is a combined multimedia and peripheral controller used
in thin clients, Internet access terminals, and diskless
workstations.
See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
config SC92031
tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
depends on NET_PCI && PCI && EXPERIMENTAL
select CRC32
---help---
This is a driver for the Fast Ethernet PCI network cards based on
the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
have one of these, say Y here.
To compile this driver as a module, choose M here: the module
will be called sc92031. This is recommended.
config CPMAC
tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
select PHYLIB
help
TI AR7 CPMAC Ethernet support
config NET_POCKET
bool "Pocket and portable adapters"
depends on PARPORT
---help---
Cute little network (Ethernet) devices which attach to the parallel
port ("pocket adapters"), commonly used with laptops. If you have
one of those, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to plug a network (or some other) card into the PCMCIA
(or PC-card) slot of your laptop instead (PCMCIA is the standard for
credit card size extension cards used by all modern laptops), you
need the pcmcia-cs package (location contained in the file
<file:Documentation/Changes>) and you can say N here.
Laptop users should read the Linux Laptop home page at
<http://www.linux-on-laptops.com/> or
Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about this class of network devices. If you say Y, you
will be asked for your specific device in the following questions.
config ATP
tristate "AT-LAN-TEC/RealTek pocket adapter support"
depends on NET_POCKET && PARPORT && X86
select CRC32
---help---
This is a network (Ethernet) device which attaches to your parallel
port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>, if you
want to use this. If you intend to use this driver, you should have
said N to the "Parallel printer support", because the two drivers
don't like each other.
To compile this driver as a module, choose M here: the module
will be called atp.
config DE600
tristate "D-Link DE600 pocket adapter support"
depends on NET_POCKET && PARPORT
---help---
This is a network (Ethernet) device which attaches to your parallel
port. Read <file:Documentation/networking/DLINK.txt> as well as the
Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, if you want to use
this. It is possible to have several devices share a single parallel
port and it is safe to compile the corresponding drivers into the
kernel.
To compile this driver as a module, choose M here: the module
will be called de600.
config DE620
tristate "D-Link DE620 pocket adapter support"
depends on NET_POCKET && PARPORT
---help---
This is a network (Ethernet) device which attaches to your parallel
port. Read <file:Documentation/networking/DLINK.txt> as well as the
Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, if you want to use
this. It is possible to have several devices share a single parallel
port and it is safe to compile the corresponding drivers into the
kernel.
To compile this driver as a module, choose M here: the module
will be called de620.
config SGISEEQ
tristate "SGI Seeq ethernet controller support"
depends on SGI_HAS_SEEQ
help
Say Y here if you have an Seeq based Ethernet network card. This is
used in many Silicon Graphics machines.
config DECLANCE
tristate "DEC LANCE ethernet controller support"
depends on MACH_DECSTATION
select CRC32
help
This driver is for the series of Ethernet controllers produced by
DEC (now Compaq) based on the AMD Lance chipset, including the
DEPCA series. (This chipset is better known via the NE2100 cards.)
config 68360_ENET
bool "Motorola 68360 ethernet controller"
depends on M68360
help
Say Y here if you want to use the built-in ethernet controller of
the Motorola 68360 processor.
config FEC
bool "FEC ethernet controller (of ColdFire CPUs)"
depends on M523x || M527x || M5272 || M528x || M520x
help
Say Y here if you want to use the built-in 10/100 Fast ethernet
controller on some Motorola ColdFire processors.
config FEC2
bool "Second FEC ethernet controller (on some ColdFire CPUs)"
depends on FEC
help
Say Y here if you want to use the second built-in 10/100 Fast
ethernet controller on some Motorola ColdFire processors.
config FEC_MPC52xx
tristate "MPC52xx FEC driver"
depends on PPC_MERGE && PPC_MPC52xx && PPC_BESTCOMM_FEC
select CRC32
select PHYLIB
---help---
This option enables support for the MPC5200's on-chip
Fast Ethernet Controller
If compiled as module, it will be called 'fec_mpc52xx.ko'.
config FEC_MPC52xx_MDIO
bool "MPC52xx FEC MDIO bus driver"
depends on FEC_MPC52xx
default y
---help---
The MPC5200's FEC can connect to the Ethernet either with
an external MII PHY chip or 10 Mbps 7-wire interface
(Motorola? industry standard).
If your board uses an external PHY connected to FEC, enable this.
If not sure, enable.
If compiled as module, it will be called 'fec_mpc52xx_phy.ko'.
config NE_H8300
tristate "NE2000 compatible support for H8/300"
depends on H8300
help
Say Y here if you want to use the NE2000 compatible
controller on the Renesas H8/300 processor.
source "drivers/net/fec_8xx/Kconfig"
source "drivers/net/fs_enet/Kconfig"
endif # NET_ETHERNET
#
# Gigabit Ethernet
#
menuconfig NETDEV_1000
bool "Ethernet (1000 Mbit)"
depends on !UML
default y
---help---
Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
type of Local Area Network (LAN) in universities and companies.
Say Y here to get to see options for Gigabit Ethernet drivers.
This option alone does not add any kernel code.
Note that drivers supporting both 100 and 1000 MBit may be listed
under "Ethernet (10 or 100MBit)" instead.
If you say N, all options in this submenu will be skipped and disabled.
if NETDEV_1000
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
depends on PCI
---help---
Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
adapter. The driver allows for using the Jumbo Frame option (9000
bytes/frame) however it requires that your switches can handle this
as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
line.
To compile this driver as a module, choose M here: the
module will be called acenic.
config ACENIC_OMIT_TIGON_I
bool "Omit support for old Tigon I based AceNICs"
depends on ACENIC
help
Say Y here if you only have Tigon II based AceNICs and want to leave
out support for the older Tigon I based cards which are no longer
being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
version)). This will reduce the size of the driver object by
app. 100KB. If you are not sure whether your card is a Tigon I or a
Tigon II, say N here.
The safe and default value for this is N.
config DL2K
tristate "DL2000/TC902x-based Gigabit Ethernet support"
depends on PCI
select CRC32
help
This driver supports DL2000/TC902x-based Gigabit ethernet cards,
which includes
D-Link DGE-550T Gigabit Ethernet Adapter.
D-Link DL2000-based Gigabit Ethernet Adapter.
Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
To compile this driver as a module, choose M here: the
module will be called dl2k.
config E1000
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
depends on PCI
---help---
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
To compile this driver as a module, choose M here. The module
will be called e1000.
config E1000_NAPI
bool "Use Rx Polling (NAPI)"
depends on E1000
help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
If your estimated Rx load is 10kpps or more, or if the card will be
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
If in doubt, say N.
config E1000_DISABLE_PACKET_SPLIT
bool "Disable Packet Split for PCI express adapters"
depends on E1000
help
Say Y here if you want to use the legacy receive path for PCI express
hardware.
If in doubt, say N.
config E1000E
tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
depends on PCI
---help---
This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
ethernet family of adapters. For PCI or PCI-X e1000 adapters,
use the regular e1000 driver For more information on how to
identify your adapter, go to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
To compile this driver as a module, choose M here. The module
will be called e1000e.
config E1000E_ENABLED
def_bool E1000E != n
config IP1000
tristate "IP1000 Gigabit Ethernet support"
depends on PCI && EXPERIMENTAL
select MII
---help---
This driver supports IP1000 gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called ipg. This is recommended.
config IGB
tristate "Intel(R) 82575 PCI-Express Gigabit Ethernet support"
depends on PCI
---help---
This driver supports Intel(R) 82575 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
To compile this driver as a module, choose M here. The module
will be called igb.
source "drivers/net/ixp2000/Kconfig"
config MYRI_SBUS
tristate "MyriCOM Gigabit Ethernet support"
depends on SBUS
help
This driver supports MyriCOM Sbus gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called myri_sbus. This is recommended.
config NS83820
tristate "National Semiconductor DP83820 support"
depends on PCI
help
This is a driver for the National Semiconductor DP83820 series
of gigabit ethernet MACs. Cards using this chipset include
the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of
zero copy.
config HAMACHI
tristate "Packet Engines Hamachi GNIC-II support"
depends on PCI
select MII
help
If you have a Gigabit Ethernet card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module will be
called hamachi.
config YELLOWFIN
tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
depends on PCI && EXPERIMENTAL
select CRC32
---help---
Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
used by the Beowulf Linux cluster project. See
<http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
information about this driver in particular and Beowulf in general.
To compile this driver as a module, choose M here: the module
will be called yellowfin. This is recommended.
config R8169
tristate "Realtek 8169 gigabit ethernet support"
depends on PCI
select CRC32
---help---
Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
To compile this driver as a module, choose M here: the module
will be called r8169. This is recommended.
config R8169_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
depends on R8169 && EXPERIMENTAL
help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
If your estimated Rx load is 10kpps or more, or if the card will be
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
If in doubt, say N.
config R8169_VLAN
bool "VLAN support"
depends on R8169 && VLAN_8021Q
---help---
Say Y here for the r8169 driver to support the functions required
by the kernel 802.1Q code.
If in doubt, say Y.
config SB1250_MAC
tristate "SB1250 Gigabit Ethernet support"
depends on SIBYTE_SB1xxx_SOC
select PHYLIB
---help---
This driver supports Gigabit Ethernet interfaces based on the
Broadcom SiByte family of System-On-a-Chip parts. They include
the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
and BCM1480 chips.
To compile this driver as a module, choose M here: the module
will be called sb1250-mac.
config SIS190
tristate "SiS190/SiS191 gigabit ethernet support"
depends on PCI
select CRC32
select MII
---help---
Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
appear in lan on motherboard designs which are based on SiS 965
and SiS 966 south bridge.
To compile this driver as a module, choose M here: the module
will be called sis190. This is recommended.
config SKGE
tristate "New SysKonnect GigaEthernet support"
depends on PCI
select CRC32
---help---
This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
and related Gigabit Ethernet adapters. It is a new smaller driver
with better performance and more complete ethtool support.
It does not support the link failover and network management
features that "portable" vendor supplied sk98lin driver does.
This driver supports adapters based on the original Yukon chipset:
Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
It does not support the newer Yukon2 chipset: a separate driver,
sky2, is provided for Yukon2-based adapters.
To compile this driver as a module, choose M here: the module
will be called skge. This is recommended.
config SKGE_DEBUG
bool "Debugging interface"
depends on SKGE && DEBUG_FS
help
This option adds the ability to dump driver state for debugging.
The file debugfs/skge/ethX displays the state of the internal
transmit and receive rings.
If unsure, say N.
config SKY2
tristate "SysKonnect Yukon2 support"
depends on PCI
select CRC32
---help---
This driver supports Gigabit Ethernet adapters based on the
Marvell Yukon 2 chipset:
Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
There is companion driver for the older Marvell Yukon and
Genesis based adapters: skge.
To compile this driver as a module, choose M here: the module
will be called sky2. This is recommended.
config SKY2_DEBUG
bool "Debugging interface"
depends on SKY2 && DEBUG_FS
help
This option adds the ability to dump driver state for debugging.
The file debugfs/sky2/ethX displays the state of the internal
transmit and receive rings.
If unsure, say N.
config VIA_VELOCITY
tristate "VIA Velocity support"
depends on PCI
select CRC32
select CRC_CCITT
select MII
help
If you have a VIA "Velocity" based network card say Y here.
To compile this driver as a module, choose M here. The module
will be called via-velocity.
config TIGON3
tristate "Broadcom Tigon3 support"
depends on PCI
help
This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called tg3. This is recommended.
config BNX2
tristate "Broadcom NetXtremeII support"
depends on PCI
select CRC32
select ZLIB_INFLATE
help
This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2. This is recommended.
config SPIDER_NET
tristate "Spider Gigabit Ethernet driver"
depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
select FW_LOADER
help
This driver supports the Gigabit Ethernet chips present on the
Cell Processor-Based Blades from IBM.
config TSI108_ETH
tristate "Tundra TSI108 gigabit Ethernet support"
depends on TSI108_BRIDGE
help
This driver supports Tundra TSI108 gigabit Ethernet ports.
To compile this driver as a module, choose M here: the module
will be called tsi108_eth.
config GELIC_NET
tristate "PS3 Gigabit Ethernet driver"
depends on PPC_PS3
help
This driver supports the network device on the PS3 game
console. This driver has built-in support for Ethernet.
To compile this driver as a module, choose M here: the
module will be called ps3_gelic.
config GELIC_WIRELESS
bool "PS3 Wireless support"
depends on GELIC_NET
select WIRELESS_EXT
help
This option adds the support for the wireless feature of PS3.
If you have the wireless-less model of PS3 or have no plan to
use wireless feature, disabling this option saves memory. As
the driver automatically distinguishes the models, you can
safely enable this option even if you have a wireless-less model.
config GIANFAR
tristate "Gianfar Ethernet"
depends on FSL_SOC
select PHYLIB
select CRC32
help
This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
and MPC86xx family of chips, and the FEC on the 8540.
config GFAR_NAPI
bool "Use Rx Polling (NAPI)"
depends on GIANFAR
config UCC_GETH
tristate "Freescale QE Gigabit Ethernet"
depends on QUICC_ENGINE
select PHYLIB
help
This driver supports the Gigabit Ethernet mode of the QUICC Engine,
which is available on some Freescale SOCs.
config UGETH_NAPI
bool "Use Rx Polling (NAPI)"
depends on UCC_GETH
config UGETH_MAGIC_PACKET
bool "Magic Packet detection support"
depends on UCC_GETH
config UGETH_FILTERING
bool "Mac address filtering support"
depends on UCC_GETH
config UGETH_TX_ON_DEMAND
bool "Transmit on Demand support"
depends on UCC_GETH
config MV643XX_ETH
tristate "Marvell Discovery (643XX) and Orion ethernet support"
depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) || PLAT_ORION
select MII
help
This driver supports the gigabit ethernet MACs in the
Marvell Discovery PPC/MIPS chipset family (MV643XX) and
in the Marvell Orion ARM SoC family.
Some boards that use the Discovery chipset are the Momenco
Ocelot C and Jaguar ATX and Pegasos II.
config QLA3XXX
tristate "QLogic QLA3XXX Network Driver Support"
depends on PCI
help
This driver supports QLogic ISP3XXX gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called qla3xxx.
config ATL1
tristate "Attansic L1 Gigabit Ethernet support (EXPERIMENTAL)"
depends on PCI && EXPERIMENTAL
select CRC32
select MII
help
This driver supports the Attansic L1 gigabit ethernet adapter.
To compile this driver as a module, choose M here. The module
will be called atl1.
endif # NETDEV_1000
#
# 10 Gigabit Ethernet
#
menuconfig NETDEV_10000
bool "Ethernet (10000 Mbit)"
depends on !UML
default y
---help---
Say Y here to get to see options for 10 Gigabit Ethernet drivers.
This option alone does not add any kernel code.
If you say N, all options in this submenu will be skipped and disabled.
if NETDEV_10000
config CHELSIO_T1
tristate "Chelsio 10Gb Ethernet support"
depends on PCI
select CRC32
help
This driver supports Chelsio gigabit and 10-gigabit
Ethernet cards. More information about adapter features and
performance tuning is in <file:Documentation/networking/cxgb.txt>.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.htm>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module, choose M here: the module
will be called cxgb.
config CHELSIO_T1_1G
bool "Chelsio gigabit Ethernet support"
depends on CHELSIO_T1
help
Enables support for Chelsio's gigabit Ethernet PCI cards. If you
are using only 10G cards say 'N' here.
config CHELSIO_T1_NAPI
bool "Use Rx Polling (NAPI)"
depends on CHELSIO_T1
default y
help
NAPI is a driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card.
config CHELSIO_T3
tristate "Chelsio Communications T3 10Gb Ethernet support"
depends on PCI
select FW_LOADER
help
This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
adapters.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
For customer support, please visit our customer support page at
<http://www.chelsio.com/support.htm>.
Please send feedback to <linux-bugs@chelsio.com>.
To compile this driver as a module, choose M here: the module
will be called cxgb3.
config EHEA
tristate "eHEA Ethernet support"
depends on IBMEBUS && INET && SPARSEMEM
select INET_LRO
---help---
This driver supports the IBM pSeries eHEA ethernet adapter.
To compile the driver as a module, choose M here. The module
will be called ehea.
config IXGBE
tristate "Intel(R) 10GbE PCI Express adapters support"
depends on PCI
---help---
This driver supports Intel(R) 10GbE PCI Express family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
To compile this driver as a module, choose M here. The module
will be called ixgbe.
config IXGB
tristate "Intel(R) PRO/10GbE support"
depends on PCI
---help---
This driver supports Intel(R) PRO/10GbE family of adapters for
PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
instead. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
For general information and support, go to the Intel support
website at:
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/ixgb.txt>.
To compile this driver as a module, choose M here. The module
will be called ixgb.
config IXGB_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
depends on IXGB && EXPERIMENTAL
help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
If your estimated Rx load is 10kpps or more, or if the card will be
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
If in doubt, say N.
config S2IO
tristate "S2IO 10Gbe XFrame NIC"
depends on PCI
---help---
This driver supports the 10Gbe XFrame NIC of S2IO.
More specific information on configuring the driver is in
<file:Documentation/networking/s2io.txt>.
config S2IO_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
depends on S2IO && EXPERIMENTAL
help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
If your estimated Rx load is 10kpps or more, or if the card will be
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
If in doubt, say N.
config MYRI10GE
tristate "Myricom Myri-10G Ethernet support"
depends on PCI && INET
select FW_LOADER
select CRC32
select INET_LRO
---help---
This driver supports Myricom Myri-10G Dual Protocol interface in
Ethernet mode. If the eeprom on your board is not recent enough,
you will need a newer firmware image.
You may get this image or more information, at:
<http://www.myri.com/scs/download-Myri10GE.html>
To compile this driver as a module, choose M here. The module
will be called myri10ge.
config NETXEN_NIC
tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
depends on PCI
help
This enables the support for NetXen's Gigabit Ethernet card.
config NIU
tristate "Sun Neptune 10Gbit Ethernet support"
depends on PCI
help
This enables support for cards based upon Sun's
Neptune chipset.
config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
depends on PPC_PASEMI && PCI
select PHYLIB
select INET_LRO
help
This driver supports the on-chip 1/10Gbit Ethernet controller on
PA Semi's PWRficient line of chips.
config MLX4_CORE
tristate
depends on PCI
default n
config MLX4_DEBUG
bool "Verbose debugging output" if (MLX4_CORE && EMBEDDED)
depends on MLX4_CORE
default y
---help---
This option causes debugging code to be compiled into the
mlx4_core driver. The output can be turned on via the
debug_level module parameter (which can also be set after
the driver is loaded through sysfs).
config TEHUTI
tristate "Tehuti Networks 10G Ethernet"
depends on PCI
help
Tehuti Networks 10G Ethernet NIC
config BNX2X
tristate "Broadcom NetXtremeII 10Gb support"
depends on PCI
select ZLIB_INFLATE
help
This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2x. This is recommended.
endif # NETDEV_10000
source "drivers/net/tokenring/Kconfig"
source "drivers/net/wireless/Kconfig"
source "drivers/net/usb/Kconfig"
source "drivers/net/pcmcia/Kconfig"
source "drivers/net/wan/Kconfig"
source "drivers/atm/Kconfig"
source "drivers/s390/net/Kconfig"
config XEN_NETDEV_FRONTEND
tristate "Xen network device frontend driver"
depends on XEN
default y
help
The network device frontend driver allows the kernel to
access network devices exported exported by a virtual
machine containing a physical network device driver. The
frontend driver is intended for unprivileged guest domains;
if you are compiling a kernel for a Xen guest, you almost
certainly want to enable this.
config ISERIES_VETH
tristate "iSeries Virtual Ethernet driver support"
depends on PPC_ISERIES
config RIONET
tristate "RapidIO Ethernet over messaging driver support"
depends on RAPIDIO
config RIONET_TX_SIZE
int "Number of outbound queue entries"
depends on RIONET
default "128"
config RIONET_RX_SIZE
int "Number of inbound queue entries"
depends on RIONET
default "128"
config FDDI
bool "FDDI driver support"
depends on (PCI || EISA || TC)
help
Fiber Distributed Data Interface is a high speed local area network
design; essentially a replacement for high speed Ethernet. FDDI can
run over copper or fiber. If you are connected to such a network and
want a driver for the FDDI card in your computer, say Y here (and
then also Y to the driver for your FDDI card, below). Most people
will say N.
config DEFXX
tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
depends on FDDI && (PCI || EISA || TC)
---help---
This is support for the DIGITAL series of TURBOchannel (DEFTA),
EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
to a local FDDI network.
To compile this driver as a module, choose M here: the module
will be called defxx. If unsure, say N.
config DEFXX_MMIO
bool
prompt "Use MMIO instead of PIO" if PCI || EISA
depends on DEFXX
default n if PCI || EISA
default y
---help---
This instructs the driver to use EISA or PCI memory-mapped I/O
(MMIO) as appropriate instead of programmed I/O ports (PIO).
Enabling this gives an improvement in processing time in parts
of the driver, but it may cause problems with EISA (DEFEA)
adapters. TURBOchannel does not have the concept of I/O ports,
so MMIO is always used for these (DEFTA) adapters.
If unsure, say N.
config SKFP
tristate "SysKonnect FDDI PCI support"
depends on FDDI && PCI
select BITREVERSE
---help---
Say Y here if you have a SysKonnect FDDI PCI adapter.
The following adapters are supported by this driver:
- SK-5521 (SK-NET FDDI-UP)
- SK-5522 (SK-NET FDDI-UP DAS)
- SK-5541 (SK-NET FDDI-FP)
- SK-5543 (SK-NET FDDI-LP)
- SK-5544 (SK-NET FDDI-LP DAS)
- SK-5821 (SK-NET FDDI-UP64)
- SK-5822 (SK-NET FDDI-UP64 DAS)
- SK-5841 (SK-NET FDDI-FP64)
- SK-5843 (SK-NET FDDI-LP64)
- SK-5844 (SK-NET FDDI-LP64 DAS)
- Netelligent 100 FDDI DAS Fibre SC
- Netelligent 100 FDDI SAS Fibre SC
- Netelligent 100 FDDI DAS UTP
- Netelligent 100 FDDI SAS UTP
- Netelligent 100 FDDI SAS Fibre MIC
Read <file:Documentation/networking/skfp.txt> for information about
the driver.
Questions concerning this driver can be addressed to:
<linux@syskonnect.de>
To compile this driver as a module, choose M here: the module
will be called skfp. This is recommended.
config HIPPI
bool "HIPPI driver support (EXPERIMENTAL)"
depends on EXPERIMENTAL && INET && PCI
help
HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
can run over copper (25m) or fiber (300m on multi-mode or 10km on
single-mode). HIPPI networks are commonly used for clusters and to
connect to super computers. If you are connected to a HIPPI network
and have a HIPPI network card in your computer that you want to use
under Linux, say Y here (you must also remember to enable the driver
for your HIPPI card below). Most people will say N here.
config ROADRUNNER
tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
depends on HIPPI && PCI
help
Say Y here if this is your PCI HIPPI network card.
To compile this driver as a module, choose M here: the module
will be called rrunner. If unsure, say N.
config ROADRUNNER_LARGE_RINGS
bool "Use large TX/RX rings (EXPERIMENTAL)"
depends on ROADRUNNER
help
If you say Y here, the RoadRunner driver will preallocate up to 2 MB
of additional memory to allow for fastest operation, both for
transmitting and receiving. This memory cannot be used by any other
kernel code or by user space programs. Say Y here only if you have
the memory.
config PLIP
tristate "PLIP (parallel port) support"
depends on PARPORT
---help---
PLIP (Parallel Line Internet Protocol) is used to create a
reasonably fast mini network consisting of two (or, rarely, more)
local machines. A PLIP link from a Linux box is a popular means to
install a Linux distribution on a machine which doesn't have a
CD-ROM drive (a minimal system has to be transferred with floppies
first). The kernels on both machines need to have this PLIP option
enabled for this to work.
The PLIP driver has two modes, mode 0 and mode 1. The parallel
ports (the connectors at the computers with 25 holes) are connected
with "null printer" or "Turbo Laplink" cables which can transmit 4
bits at a time (mode 0) or with special PLIP cables, to be used on
bidirectional parallel ports only, which can transmit 8 bits at a
time (mode 1); you can find the wiring of these cables in
<file:Documentation/networking/PLIP.txt>. The cables can be up to
15m long. Mode 0 works also if one of the machines runs DOS/Windows
and has some PLIP software installed, e.g. the Crynwr PLIP packet
driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
and winsock or NCSA's telnet.
If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
as the NET-3-HOWTO, both available from
<http://www.tldp.org/docs.html#howto>. Note that the PLIP
protocol has been changed and this PLIP driver won't work together
with the PLIP support in Linux versions 1.0.x. This option enlarges
your kernel by about 8 KB.
To compile this driver as a module, choose M here. The module
will be called plip. If unsure, say Y or M, in case you buy
a laptop later.
config PPP
tristate "PPP (point-to-point protocol) support"
select SLHC
---help---
PPP (Point to Point Protocol) is a newer and better SLIP. It serves
the same purpose: sending Internet traffic over telephone (and other
serial) lines. Ask your access provider if they support it, because
otherwise you can't use it; most Internet access providers these
days support PPP rather than SLIP.
To use PPP, you need an additional program called pppd as described
in the PPP-HOWTO, available at
<http://www.tldp.org/docs.html#howto>. Make sure that you have
the version of pppd recommended in <file:Documentation/Changes>.
The PPP option enlarges your kernel by about 16 KB.
There are actually two versions of PPP: the traditional PPP for
asynchronous lines, such as regular analog phone lines, and
synchronous PPP which can be used over digital ISDN lines for
example. If you want to use PPP over phone lines or other
asynchronous serial lines, you need to say Y (or M) here and also to
the next option, "PPP support for async serial ports". For PPP over
synchronous lines, you should say Y (or M) here and to "Support
synchronous PPP", below.
If you said Y to "Version information on all symbols" above, then
you cannot compile the PPP driver into the kernel; you can then only
compile it as a module. To compile this driver as a module, choose M
here. The module will be called ppp_generic.
config PPP_MULTILINK
bool "PPP multilink support (EXPERIMENTAL)"
depends on PPP && EXPERIMENTAL
help
PPP multilink is a protocol (defined in RFC 1990) which allows you
to combine several (logical or physical) lines into one logical PPP
connection, so that you can utilize your full bandwidth.
This has to be supported at the other end as well and you need a
version of the pppd daemon which understands the multilink protocol.
If unsure, say N.
config PPP_FILTER
bool "PPP filtering"
depends on PPP
help
Say Y here if you want to be able to filter the packets passing over
PPP interfaces. This allows you to control which packets count as
activity (i.e. which packets will reset the idle timer or bring up
a demand-dialed link) and which packets are to be dropped entirely.
You need to say Y here if you wish to use the pass-filter and
active-filter options to pppd.
If unsure, say N.
config PPP_ASYNC
tristate "PPP support for async serial ports"
depends on PPP
select CRC_CCITT
---help---
Say Y (or M) here if you want to be able to use PPP over standard
asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
a modem (not a synchronous or ISDN modem) to contact your ISP, you
need this option.
To compile this driver as a module, choose M here.
If unsure, say Y.
config PPP_SYNC_TTY
tristate "PPP support for sync tty ports"
depends on PPP
help
Say Y (or M) here if you want to be able to use PPP over synchronous
(HDLC) tty devices, such as the SyncLink adapter. These devices
are often used for high-speed leased lines like T1/E1.
To compile this driver as a module, choose M here.
config PPP_DEFLATE
tristate "PPP Deflate compression"
depends on PPP
select ZLIB_INFLATE
select ZLIB_DEFLATE
---help---
Support for the Deflate compression method for PPP, which uses the
Deflate algorithm (the same algorithm that gzip uses) to compress
each PPP packet before it is sent over the wire. The machine at the
other end of the PPP link (usually your ISP) has to support the
Deflate compression method as well for this to be useful. Even if
they don't support it, it is safe to say Y here.
To compile this driver as a module, choose M here.
config PPP_BSDCOMP
tristate "PPP BSD-Compress compression"
depends on PPP
---help---
Support for the BSD-Compress compression method for PPP, which uses
the LZW compression method to compress each PPP packet before it is
sent over the wire. The machine at the other end of the PPP link
(usually your ISP) has to support the BSD-Compress compression
method as well for this to be useful. Even if they don't support it,
it is safe to say Y here.
The PPP Deflate compression method ("PPP Deflate compression",
above) is preferable to BSD-Compress, because it compresses better
and is patent-free.
Note that the BSD compression code will always be compiled as a
module; it is called bsd_comp and will show up in the directory
modules once you have said "make modules". If unsure, say N.
config PPP_MPPE
tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
depends on PPP && EXPERIMENTAL
select CRYPTO
select CRYPTO_SHA1
select CRYPTO_ARC4
select CRYPTO_ECB
---help---
Support for the MPPE Encryption protocol, as employed by the
Microsoft Point-to-Point Tunneling Protocol.
See http://pptpclient.sourceforge.net/ for information on
configuring PPTP clients and servers to utilize this method.
config PPPOE
tristate "PPP over Ethernet (EXPERIMENTAL)"
depends on EXPERIMENTAL && PPP
help
Support for PPP over Ethernet.
This driver requires the latest version of pppd from the CVS
repository at cvs.samba.org. Alternatively, see the
RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
which contains instruction on how to use this driver (under
the heading "Kernel mode PPPoE").
config PPPOATM
tristate "PPP over ATM"
depends on ATM && PPP
help
Support PPP (Point to Point Protocol) encapsulated in ATM frames.
This implementation does not yet comply with section 8 of RFC2364,
which can lead to bad results if the ATM peer loses state and
changes its encapsulation unilaterally.
config PPPOL2TP
tristate "PPP over L2TP (EXPERIMENTAL)"
depends on EXPERIMENTAL && PPP && INET
help
Support for PPP-over-L2TP socket family. L2TP is a protocol
used by ISPs and enterprises to tunnel PPP traffic over UDP
tunnels. L2TP is replacing PPTP for VPN uses.
This kernel component handles only L2TP data packets: a
userland daemon handles L2TP the control protocol (tunnel
and session setup). One such daemon is OpenL2TP
(http://openl2tp.sourceforge.net/).
config SLIP
tristate "SLIP (serial line) support"
---help---
Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
connect to your Internet service provider or to connect to some
other local Unix box or if you want to configure your Linux box as a
Slip/CSlip server for other people to dial in. SLIP (Serial Line
Internet Protocol) is a protocol used to send Internet traffic over
serial connections such as telephone lines or null modem cables;
nowadays, the protocol PPP is more commonly used for this same
purpose.
Normally, your access provider has to support SLIP in order for you
to be able to use it, but there is now a SLIP emulator called SLiRP
around (available from
<ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
allows you to use SLIP over a regular dial up shell connection. If
you plan to use SLiRP, make sure to say Y to CSLIP, below. The
NET-3-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, explains how to
configure SLIP. Note that you don't need this option if you just
want to run term (term is a program which gives you almost full
Internet connectivity if you have a regular dial up shell account on
some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
support will enlarge your kernel by about 4 KB. If unsure, say N.
To compile this driver as a module, choose M here. The module
will be called slip.
config SLIP_COMPRESSED
bool "CSLIP compressed headers"
depends on SLIP
select SLHC
---help---
This protocol is faster than SLIP because it uses compression on the
TCP/IP headers (not on the data itself), but it has to be supported
on both ends. Ask your access provider if you are not sure and
answer Y, just in case. You will still be able to use plain SLIP. If
you plan to use SLiRP, the SLIP emulator (available from
<ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
allows you to use SLIP over a regular dial up shell connection, you
definitely want to say Y here. The NET-3-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, explains how to configure
CSLIP. This won't enlarge your kernel.
config SLHC
tristate
help
This option enables Van Jacobsen serial line header compression
routines.
config SLIP_SMART
bool "Keepalive and linefill"
depends on SLIP
help
Adds additional capabilities to the SLIP driver to support the
RELCOM line fill and keepalive monitoring. Ideal on poor quality
analogue lines.
config SLIP_MODE_SLIP6
bool "Six bit SLIP encapsulation"
depends on SLIP
help
Just occasionally you may need to run IP over hostile serial
networks that don't pass all control characters or are only seven
bit. Saying Y here adds an extra mode you can use with SLIP:
"slip6". In this mode, SLIP will only send normal ASCII symbols over
the serial device. Naturally, this has to be supported at the other
end of the link as well. It's good enough, for example, to run IP
over the async ports of a Camtec JNT Pad. If unsure, say N.
config NET_FC
bool "Fibre Channel driver support"
depends on SCSI && PCI
help
Fibre Channel is a high speed serial protocol mainly used to connect
large storage devices to the computer; it is compatible with and
intended to replace SCSI.
If you intend to use Fibre Channel, you need to have a Fibre channel
adaptor card in your computer; say Y here and to the driver for your
adaptor below. You also should have said Y to "SCSI support" and
"SCSI generic support".
config NETCONSOLE
tristate "Network console logging support (EXPERIMENTAL)"
depends on EXPERIMENTAL
---help---
If you want to log kernel messages over the network, enable this.
See <file:Documentation/networking/netconsole.txt> for details.
config NETCONSOLE_DYNAMIC
bool "Dynamic reconfiguration of logging targets (EXPERIMENTAL)"
depends on NETCONSOLE && SYSFS && EXPERIMENTAL
select CONFIGFS_FS
help
This option enables the ability to dynamically reconfigure target
parameters (interface, IP addresses, port numbers, MAC addresses)
at runtime through a userspace interface exported using configfs.
See <file:Documentation/networking/netconsole.txt> for details.
config NETPOLL
def_bool NETCONSOLE
config NETPOLL_TRAP
bool "Netpoll traffic trapping"
default n
depends on NETPOLL
config NET_POLL_CONTROLLER
def_bool NETPOLL
config VIRTIO_NET
tristate "Virtio network driver (EXPERIMENTAL)"
depends on EXPERIMENTAL && VIRTIO
---help---
This is the virtual network driver for virtio. It can be used with
lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
endif # NETDEVICES
Reference in a new issue View git blame Copy permalink