kernel-fxtec-pro1x/arch/arm/kernel/swp_emulate.c
Peter Zijlstra a8b0ca17b8 perf: Remove the nmi parameter from the swevent and overflow interface
The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.

For the various event classes:

  - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
    the PMI-tail (ARM etc.)
  - tracepoint: nmi=0; since tracepoint could be from NMI context.
  - software: nmi=[0,1]; some, like the schedule thing cannot
    perform wakeups, and hence need 0.

As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).

The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01 11:06:35 +02:00

267 lines
6.8 KiB
C

/*
* linux/arch/arm/kernel/swp_emulate.c
*
* Copyright (C) 2009 ARM Limited
* __user_* functions adapted from include/asm/uaccess.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Implements emulation of the SWP/SWPB instructions using load-exclusive and
* store-exclusive for processors that have them disabled (or future ones that
* might not implement them).
*
* Syntax of SWP{B} instruction: SWP{B}<c> <Rt>, <Rt2>, [<Rn>]
* Where: Rt = destination
* Rt2 = source
* Rn = address
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/proc_fs.h>
#include <linux/sched.h>
#include <linux/syscalls.h>
#include <linux/perf_event.h>
#include <asm/traps.h>
#include <asm/uaccess.h>
/*
* Error-checking SWP macros implemented using ldrex{b}/strex{b}
*/
#define __user_swpX_asm(data, addr, res, temp, B) \
__asm__ __volatile__( \
" mov %2, %1\n" \
"0: ldrex"B" %1, [%3]\n" \
"1: strex"B" %0, %2, [%3]\n" \
" cmp %0, #0\n" \
" movne %0, %4\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %5\n" \
" b 2b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 0b, 3b\n" \
" .long 1b, 3b\n" \
" .previous" \
: "=&r" (res), "+r" (data), "=&r" (temp) \
: "r" (addr), "i" (-EAGAIN), "i" (-EFAULT) \
: "cc", "memory")
#define __user_swp_asm(data, addr, res, temp) \
__user_swpX_asm(data, addr, res, temp, "")
#define __user_swpb_asm(data, addr, res, temp) \
__user_swpX_asm(data, addr, res, temp, "b")
/*
* Macros/defines for extracting register numbers from instruction.
*/
#define EXTRACT_REG_NUM(instruction, offset) \
(((instruction) & (0xf << (offset))) >> (offset))
#define RN_OFFSET 16
#define RT_OFFSET 12
#define RT2_OFFSET 0
/*
* Bit 22 of the instruction encoding distinguishes between
* the SWP and SWPB variants (bit set means SWPB).
*/
#define TYPE_SWPB (1 << 22)
static unsigned long swpcounter;
static unsigned long swpbcounter;
static unsigned long abtcounter;
static pid_t previous_pid;
#ifdef CONFIG_PROC_FS
static int proc_read_status(char *page, char **start, off_t off, int count,
int *eof, void *data)
{
char *p = page;
int len;
p += sprintf(p, "Emulated SWP:\t\t%lu\n", swpcounter);
p += sprintf(p, "Emulated SWPB:\t\t%lu\n", swpbcounter);
p += sprintf(p, "Aborted SWP{B}:\t\t%lu\n", abtcounter);
if (previous_pid != 0)
p += sprintf(p, "Last process:\t\t%d\n", previous_pid);
len = (p - page) - off;
if (len < 0)
len = 0;
*eof = (len <= count) ? 1 : 0;
*start = page + off;
return len;
}
#endif
/*
* Set up process info to signal segmentation fault - called on access error.
*/
static void set_segfault(struct pt_regs *regs, unsigned long addr)
{
siginfo_t info;
if (find_vma(current->mm, addr) == NULL)
info.si_code = SEGV_MAPERR;
else
info.si_code = SEGV_ACCERR;
info.si_signo = SIGSEGV;
info.si_errno = 0;
info.si_addr = (void *) instruction_pointer(regs);
pr_debug("SWP{B} emulation: access caused memory abort!\n");
arm_notify_die("Illegal memory access", regs, &info, 0, 0);
abtcounter++;
}
static int emulate_swpX(unsigned int address, unsigned int *data,
unsigned int type)
{
unsigned int res = 0;
if ((type != TYPE_SWPB) && (address & 0x3)) {
/* SWP to unaligned address not permitted */
pr_debug("SWP instruction on unaligned pointer!\n");
return -EFAULT;
}
while (1) {
unsigned long temp;
/*
* Barrier required between accessing protected resource and
* releasing a lock for it. Legacy code might not have done
* this, and we cannot determine that this is not the case
* being emulated, so insert always.
*/
smp_mb();
if (type == TYPE_SWPB)
__user_swpb_asm(*data, address, res, temp);
else
__user_swp_asm(*data, address, res, temp);
if (likely(res != -EAGAIN) || signal_pending(current))
break;
cond_resched();
}
if (res == 0) {
/*
* Barrier also required between acquiring a lock for a
* protected resource and accessing the resource. Inserted for
* same reason as above.
*/
smp_mb();
if (type == TYPE_SWPB)
swpbcounter++;
else
swpcounter++;
}
return res;
}
/*
* swp_handler logs the id of calling process, dissects the instruction, sanity
* checks the memory location, calls emulate_swpX for the actual operation and
* deals with fixup/error handling before returning
*/
static int swp_handler(struct pt_regs *regs, unsigned int instr)
{
unsigned int address, destreg, data, type;
unsigned int res = 0;
perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->ARM_pc);
if (current->pid != previous_pid) {
pr_debug("\"%s\" (%ld) uses deprecated SWP{B} instruction\n",
current->comm, (unsigned long)current->pid);
previous_pid = current->pid;
}
address = regs->uregs[EXTRACT_REG_NUM(instr, RN_OFFSET)];
data = regs->uregs[EXTRACT_REG_NUM(instr, RT2_OFFSET)];
destreg = EXTRACT_REG_NUM(instr, RT_OFFSET);
type = instr & TYPE_SWPB;
pr_debug("addr in r%d->0x%08x, dest is r%d, source in r%d->0x%08x)\n",
EXTRACT_REG_NUM(instr, RN_OFFSET), address,
destreg, EXTRACT_REG_NUM(instr, RT2_OFFSET), data);
/* Check access in reasonable access range for both SWP and SWPB */
if (!access_ok(VERIFY_WRITE, (address & ~3), 4)) {
pr_debug("SWP{B} emulation: access to %p not allowed!\n",
(void *)address);
res = -EFAULT;
} else {
res = emulate_swpX(address, &data, type);
}
if (res == 0) {
/*
* On successful emulation, revert the adjustment to the PC
* made in kernel/traps.c in order to resume execution at the
* instruction following the SWP{B}.
*/
regs->ARM_pc += 4;
regs->uregs[destreg] = data;
} else if (res == -EFAULT) {
/*
* Memory errors do not mean emulation failed.
* Set up signal info to return SEGV, then return OK
*/
set_segfault(regs, address);
}
return 0;
}
/*
* Only emulate SWP/SWPB executed in ARM state/User mode.
* The kernel must be SWP free and SWP{B} does not exist in Thumb/ThumbEE.
*/
static struct undef_hook swp_hook = {
.instr_mask = 0x0fb00ff0,
.instr_val = 0x01000090,
.cpsr_mask = MODE_MASK | PSR_T_BIT | PSR_J_BIT,
.cpsr_val = USR_MODE,
.fn = swp_handler
};
/*
* Register handler and create status file in /proc/cpu
* Invoked as late_initcall, since not needed before init spawned.
*/
static int __init swp_emulation_init(void)
{
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *res;
res = create_proc_entry("cpu/swp_emulation", S_IRUGO, NULL);
if (!res)
return -ENOMEM;
res->read_proc = proc_read_status;
#endif /* CONFIG_PROC_FS */
printk(KERN_NOTICE "Registering SWP/SWPB emulation handler\n");
register_undef_hook(&swp_hook);
return 0;
}
late_initcall(swp_emulation_init);