335f8514f2
This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
612 lines
15 KiB
C
612 lines
15 KiB
C
/*
|
|
* Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
|
|
* Copyright 2007, Werner Cornelius <werner@cornelius-consult.de>
|
|
* Copyright 2009, Boris Hajduk <boris@hajduk.org>
|
|
*
|
|
* ch341.c implements a serial port driver for the Winchiphead CH341.
|
|
*
|
|
* The CH341 device can be used to implement an RS232 asynchronous
|
|
* serial port, an IEEE-1284 parallel printer port or a memory-like
|
|
* interface. In all cases the CH341 supports an I2C interface as well.
|
|
* This driver only supports the asynchronous serial interface.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License version
|
|
* 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/module.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/serial.h>
|
|
#include <linux/serial.h>
|
|
|
|
#define DEFAULT_BAUD_RATE 9600
|
|
#define DEFAULT_TIMEOUT 1000
|
|
|
|
/* flags for IO-Bits */
|
|
#define CH341_BIT_RTS (1 << 6)
|
|
#define CH341_BIT_DTR (1 << 5)
|
|
|
|
/******************************/
|
|
/* interrupt pipe definitions */
|
|
/******************************/
|
|
/* always 4 interrupt bytes */
|
|
/* first irq byte normally 0x08 */
|
|
/* second irq byte base 0x7d + below */
|
|
/* third irq byte base 0x94 + below */
|
|
/* fourth irq byte normally 0xee */
|
|
|
|
/* second interrupt byte */
|
|
#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
|
|
|
|
/* status returned in third interrupt answer byte, inverted in data
|
|
from irq */
|
|
#define CH341_BIT_CTS 0x01
|
|
#define CH341_BIT_DSR 0x02
|
|
#define CH341_BIT_RI 0x04
|
|
#define CH341_BIT_DCD 0x08
|
|
#define CH341_BITS_MODEM_STAT 0x0f /* all bits */
|
|
|
|
/*******************************/
|
|
/* baudrate calculation factor */
|
|
/*******************************/
|
|
#define CH341_BAUDBASE_FACTOR 1532620800
|
|
#define CH341_BAUDBASE_DIVMAX 3
|
|
|
|
static int debug;
|
|
|
|
static struct usb_device_id id_table [] = {
|
|
{ USB_DEVICE(0x4348, 0x5523) },
|
|
{ USB_DEVICE(0x1a86, 0x7523) },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, id_table);
|
|
|
|
struct ch341_private {
|
|
spinlock_t lock; /* access lock */
|
|
wait_queue_head_t delta_msr_wait; /* wait queue for modem status */
|
|
unsigned baud_rate; /* set baud rate */
|
|
u8 line_control; /* set line control value RTS/DTR */
|
|
u8 line_status; /* active status of modem control inputs */
|
|
u8 multi_status_change; /* status changed multiple since last call */
|
|
};
|
|
|
|
static int ch341_control_out(struct usb_device *dev, u8 request,
|
|
u16 value, u16 index)
|
|
{
|
|
int r;
|
|
dbg("ch341_control_out(%02x,%02x,%04x,%04x)", USB_DIR_OUT|0x40,
|
|
(int)request, (int)value, (int)index);
|
|
|
|
r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
|
|
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
|
|
value, index, NULL, 0, DEFAULT_TIMEOUT);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int ch341_control_in(struct usb_device *dev,
|
|
u8 request, u16 value, u16 index,
|
|
char *buf, unsigned bufsize)
|
|
{
|
|
int r;
|
|
dbg("ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)", USB_DIR_IN|0x40,
|
|
(int)request, (int)value, (int)index, buf, (int)bufsize);
|
|
|
|
r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
|
|
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
|
|
value, index, buf, bufsize, DEFAULT_TIMEOUT);
|
|
return r;
|
|
}
|
|
|
|
static int ch341_set_baudrate(struct usb_device *dev,
|
|
struct ch341_private *priv)
|
|
{
|
|
short a, b;
|
|
int r;
|
|
unsigned long factor;
|
|
short divisor;
|
|
|
|
dbg("ch341_set_baudrate(%d)", priv->baud_rate);
|
|
|
|
if (!priv->baud_rate)
|
|
return -EINVAL;
|
|
factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate);
|
|
divisor = CH341_BAUDBASE_DIVMAX;
|
|
|
|
while ((factor > 0xfff0) && divisor) {
|
|
factor >>= 3;
|
|
divisor--;
|
|
}
|
|
|
|
if (factor > 0xfff0)
|
|
return -EINVAL;
|
|
|
|
factor = 0x10000 - factor;
|
|
a = (factor & 0xff00) | divisor;
|
|
b = factor & 0xff;
|
|
|
|
r = ch341_control_out(dev, 0x9a, 0x1312, a);
|
|
if (!r)
|
|
r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int ch341_set_handshake(struct usb_device *dev, u8 control)
|
|
{
|
|
dbg("ch341_set_handshake(0x%02x)", control);
|
|
return ch341_control_out(dev, 0xa4, ~control, 0);
|
|
}
|
|
|
|
static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
|
|
{
|
|
char *buffer;
|
|
int r;
|
|
const unsigned size = 8;
|
|
unsigned long flags;
|
|
|
|
dbg("ch341_get_status()");
|
|
|
|
buffer = kmalloc(size, GFP_KERNEL);
|
|
if (!buffer)
|
|
return -ENOMEM;
|
|
|
|
r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
|
|
if (r < 0)
|
|
goto out;
|
|
|
|
/* setup the private status if available */
|
|
if (r == 2) {
|
|
r = 0;
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
|
|
priv->multi_status_change = 0;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
} else
|
|
r = -EPROTO;
|
|
|
|
out: kfree(buffer);
|
|
return r;
|
|
}
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
|
|
{
|
|
char *buffer;
|
|
int r;
|
|
const unsigned size = 8;
|
|
|
|
dbg("ch341_configure()");
|
|
|
|
buffer = kmalloc(size, GFP_KERNEL);
|
|
if (!buffer)
|
|
return -ENOMEM;
|
|
|
|
/* expect two bytes 0x27 0x00 */
|
|
r = ch341_control_in(dev, 0x5f, 0, 0, buffer, size);
|
|
if (r < 0)
|
|
goto out;
|
|
|
|
r = ch341_control_out(dev, 0xa1, 0, 0);
|
|
if (r < 0)
|
|
goto out;
|
|
|
|
r = ch341_set_baudrate(dev, priv);
|
|
if (r < 0)
|
|
goto out;
|
|
|
|
/* expect two bytes 0x56 0x00 */
|
|
r = ch341_control_in(dev, 0x95, 0x2518, 0, buffer, size);
|
|
if (r < 0)
|
|
goto out;
|
|
|
|
r = ch341_control_out(dev, 0x9a, 0x2518, 0x0050);
|
|
if (r < 0)
|
|
goto out;
|
|
|
|
/* expect 0xff 0xee */
|
|
r = ch341_get_status(dev, priv);
|
|
if (r < 0)
|
|
goto out;
|
|
|
|
r = ch341_control_out(dev, 0xa1, 0x501f, 0xd90a);
|
|
if (r < 0)
|
|
goto out;
|
|
|
|
r = ch341_set_baudrate(dev, priv);
|
|
if (r < 0)
|
|
goto out;
|
|
|
|
r = ch341_set_handshake(dev, priv->line_control);
|
|
if (r < 0)
|
|
goto out;
|
|
|
|
/* expect 0x9f 0xee */
|
|
r = ch341_get_status(dev, priv);
|
|
|
|
out: kfree(buffer);
|
|
return r;
|
|
}
|
|
|
|
/* allocate private data */
|
|
static int ch341_attach(struct usb_serial *serial)
|
|
{
|
|
struct ch341_private *priv;
|
|
int r;
|
|
|
|
dbg("ch341_attach()");
|
|
|
|
/* private data */
|
|
priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&priv->lock);
|
|
init_waitqueue_head(&priv->delta_msr_wait);
|
|
priv->baud_rate = DEFAULT_BAUD_RATE;
|
|
priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
|
|
|
|
r = ch341_configure(serial->dev, priv);
|
|
if (r < 0)
|
|
goto error;
|
|
|
|
usb_set_serial_port_data(serial->port[0], priv);
|
|
return 0;
|
|
|
|
error: kfree(priv);
|
|
return r;
|
|
}
|
|
|
|
static int ch341_carrier_raised(struct usb_serial_port *port)
|
|
{
|
|
struct ch341_private *priv = usb_get_serial_port_data(port);
|
|
if (priv->line_status & CH341_BIT_DCD)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static void ch341_dtr_rts(struct usb_serial_port *port, int on)
|
|
{
|
|
struct ch341_private *priv = usb_get_serial_port_data(port);
|
|
unsigned long flags;
|
|
|
|
dbg("%s - port %d", __func__, port->number);
|
|
/* drop DTR and RTS */
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (on)
|
|
priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR;
|
|
else
|
|
priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
ch341_set_handshake(port->serial->dev, priv->line_control);
|
|
wake_up_interruptible(&priv->delta_msr_wait);
|
|
}
|
|
|
|
static void ch341_close(struct usb_serial_port *port)
|
|
{
|
|
dbg("%s - port %d", __func__, port->number);
|
|
|
|
/* shutdown our urbs */
|
|
dbg("%s - shutting down urbs", __func__);
|
|
usb_kill_urb(port->write_urb);
|
|
usb_kill_urb(port->read_urb);
|
|
usb_kill_urb(port->interrupt_in_urb);
|
|
}
|
|
|
|
|
|
/* open this device, set default parameters */
|
|
static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
|
|
struct file *filp)
|
|
{
|
|
struct usb_serial *serial = port->serial;
|
|
struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
|
|
int r;
|
|
|
|
dbg("ch341_open()");
|
|
|
|
priv->baud_rate = DEFAULT_BAUD_RATE;
|
|
|
|
r = ch341_configure(serial->dev, priv);
|
|
if (r)
|
|
goto out;
|
|
|
|
r = ch341_set_handshake(serial->dev, priv->line_control);
|
|
if (r)
|
|
goto out;
|
|
|
|
r = ch341_set_baudrate(serial->dev, priv);
|
|
if (r)
|
|
goto out;
|
|
|
|
dbg("%s - submitting interrupt urb", __func__);
|
|
port->interrupt_in_urb->dev = serial->dev;
|
|
r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
|
|
if (r) {
|
|
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
|
|
" error %d\n", __func__, r);
|
|
ch341_close(port);
|
|
return -EPROTO;
|
|
}
|
|
|
|
r = usb_serial_generic_open(tty, port, filp);
|
|
|
|
out: return r;
|
|
}
|
|
|
|
/* Old_termios contains the original termios settings and
|
|
* tty->termios contains the new setting to be used.
|
|
*/
|
|
static void ch341_set_termios(struct tty_struct *tty,
|
|
struct usb_serial_port *port, struct ktermios *old_termios)
|
|
{
|
|
struct ch341_private *priv = usb_get_serial_port_data(port);
|
|
unsigned baud_rate;
|
|
unsigned long flags;
|
|
|
|
dbg("ch341_set_termios()");
|
|
|
|
baud_rate = tty_get_baud_rate(tty);
|
|
|
|
priv->baud_rate = baud_rate;
|
|
|
|
if (baud_rate) {
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
ch341_set_baudrate(port->serial->dev, priv);
|
|
} else {
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
ch341_set_handshake(port->serial->dev, priv->line_control);
|
|
|
|
/* Unimplemented:
|
|
* (cflag & CSIZE) : data bits [5, 8]
|
|
* (cflag & PARENB) : parity {NONE, EVEN, ODD}
|
|
* (cflag & CSTOPB) : stop bits [1, 2]
|
|
*/
|
|
}
|
|
|
|
static int ch341_tiocmset(struct tty_struct *tty, struct file *file,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct ch341_private *priv = usb_get_serial_port_data(port);
|
|
unsigned long flags;
|
|
u8 control;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (set & TIOCM_RTS)
|
|
priv->line_control |= CH341_BIT_RTS;
|
|
if (set & TIOCM_DTR)
|
|
priv->line_control |= CH341_BIT_DTR;
|
|
if (clear & TIOCM_RTS)
|
|
priv->line_control &= ~CH341_BIT_RTS;
|
|
if (clear & TIOCM_DTR)
|
|
priv->line_control &= ~CH341_BIT_DTR;
|
|
control = priv->line_control;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return ch341_set_handshake(port->serial->dev, control);
|
|
}
|
|
|
|
static void ch341_read_int_callback(struct urb *urb)
|
|
{
|
|
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
|
|
unsigned char *data = urb->transfer_buffer;
|
|
unsigned int actual_length = urb->actual_length;
|
|
int status;
|
|
|
|
dbg("%s (%d)", __func__, port->number);
|
|
|
|
switch (urb->status) {
|
|
case 0:
|
|
/* success */
|
|
break;
|
|
case -ECONNRESET:
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
/* this urb is terminated, clean up */
|
|
dbg("%s - urb shutting down with status: %d", __func__,
|
|
urb->status);
|
|
return;
|
|
default:
|
|
dbg("%s - nonzero urb status received: %d", __func__,
|
|
urb->status);
|
|
goto exit;
|
|
}
|
|
|
|
usb_serial_debug_data(debug, &port->dev, __func__,
|
|
urb->actual_length, urb->transfer_buffer);
|
|
|
|
if (actual_length >= 4) {
|
|
struct ch341_private *priv = usb_get_serial_port_data(port);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
|
|
if ((data[1] & CH341_MULT_STAT))
|
|
priv->multi_status_change = 1;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
wake_up_interruptible(&priv->delta_msr_wait);
|
|
}
|
|
|
|
exit:
|
|
status = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (status)
|
|
dev_err(&urb->dev->dev,
|
|
"%s - usb_submit_urb failed with result %d\n",
|
|
__func__, status);
|
|
}
|
|
|
|
static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
|
|
{
|
|
struct ch341_private *priv = usb_get_serial_port_data(port);
|
|
unsigned long flags;
|
|
u8 prevstatus;
|
|
u8 status;
|
|
u8 changed;
|
|
u8 multi_change = 0;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
prevstatus = priv->line_status;
|
|
priv->multi_status_change = 0;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
while (!multi_change) {
|
|
interruptible_sleep_on(&priv->delta_msr_wait);
|
|
/* see if a signal did it */
|
|
if (signal_pending(current))
|
|
return -ERESTARTSYS;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
status = priv->line_status;
|
|
multi_change = priv->multi_status_change;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
changed = prevstatus ^ status;
|
|
|
|
if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) ||
|
|
((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) ||
|
|
((arg & TIOCM_CD) && (changed & CH341_BIT_DCD)) ||
|
|
((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) {
|
|
return 0;
|
|
}
|
|
prevstatus = status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/
|
|
static int ch341_ioctl(struct tty_struct *tty, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
|
|
|
|
switch (cmd) {
|
|
case TIOCMIWAIT:
|
|
dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
|
|
return wait_modem_info(port, arg);
|
|
|
|
default:
|
|
dbg("%s not supported = 0x%04x", __func__, cmd);
|
|
break;
|
|
}
|
|
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
|
|
static int ch341_tiocmget(struct tty_struct *tty, struct file *file)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct ch341_private *priv = usb_get_serial_port_data(port);
|
|
unsigned long flags;
|
|
u8 mcr;
|
|
u8 status;
|
|
unsigned int result;
|
|
|
|
dbg("%s (%d)", __func__, port->number);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
mcr = priv->line_control;
|
|
status = priv->line_status;
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
result = ((mcr & CH341_BIT_DTR) ? TIOCM_DTR : 0)
|
|
| ((mcr & CH341_BIT_RTS) ? TIOCM_RTS : 0)
|
|
| ((status & CH341_BIT_CTS) ? TIOCM_CTS : 0)
|
|
| ((status & CH341_BIT_DSR) ? TIOCM_DSR : 0)
|
|
| ((status & CH341_BIT_RI) ? TIOCM_RI : 0)
|
|
| ((status & CH341_BIT_DCD) ? TIOCM_CD : 0);
|
|
|
|
dbg("%s - result = %x", __func__, result);
|
|
|
|
return result;
|
|
}
|
|
|
|
|
|
static int ch341_reset_resume(struct usb_interface *intf)
|
|
{
|
|
struct usb_device *dev = interface_to_usbdev(intf);
|
|
struct usb_serial *serial = NULL;
|
|
struct ch341_private *priv;
|
|
|
|
serial = usb_get_intfdata(intf);
|
|
priv = usb_get_serial_port_data(serial->port[0]);
|
|
|
|
/*reconfigure ch341 serial port after bus-reset*/
|
|
ch341_configure(dev, priv);
|
|
|
|
usb_serial_resume(intf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct usb_driver ch341_driver = {
|
|
.name = "ch341",
|
|
.probe = usb_serial_probe,
|
|
.disconnect = usb_serial_disconnect,
|
|
.suspend = usb_serial_suspend,
|
|
.resume = usb_serial_resume,
|
|
.reset_resume = ch341_reset_resume,
|
|
.id_table = id_table,
|
|
.no_dynamic_id = 1,
|
|
.supports_autosuspend = 1,
|
|
};
|
|
|
|
static struct usb_serial_driver ch341_device = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "ch341-uart",
|
|
},
|
|
.id_table = id_table,
|
|
.usb_driver = &ch341_driver,
|
|
.num_ports = 1,
|
|
.open = ch341_open,
|
|
.dtr_rts = ch341_dtr_rts,
|
|
.carrier_raised = ch341_carrier_raised,
|
|
.close = ch341_close,
|
|
.ioctl = ch341_ioctl,
|
|
.set_termios = ch341_set_termios,
|
|
.tiocmget = ch341_tiocmget,
|
|
.tiocmset = ch341_tiocmset,
|
|
.read_int_callback = ch341_read_int_callback,
|
|
.attach = ch341_attach,
|
|
};
|
|
|
|
static int __init ch341_init(void)
|
|
{
|
|
int retval;
|
|
|
|
retval = usb_serial_register(&ch341_device);
|
|
if (retval)
|
|
return retval;
|
|
retval = usb_register(&ch341_driver);
|
|
if (retval)
|
|
usb_serial_deregister(&ch341_device);
|
|
return retval;
|
|
}
|
|
|
|
static void __exit ch341_exit(void)
|
|
{
|
|
usb_deregister(&ch341_driver);
|
|
usb_serial_deregister(&ch341_device);
|
|
}
|
|
|
|
module_init(ch341_init);
|
|
module_exit(ch341_exit);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(debug, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Debug enabled or not");
|
|
|
|
/* EOF ch341.c */
|