140277e9a7
Subnet manager SetPortinfo messages distingush between changing the link state (DOWN, ARM, ACTIVE) and the link physical state (POLL, SLEEP, DISABLED). These are somewhat independent commands and affect when link width and speed changes take effect. Without this patch, a link DOWN physical state NOP command was causing the link width and speed settings to take effect which should only happen when the link physical state is goes down (either by a SMP or some link physical error like link errors exceeding the threshold). Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
1600 lines
44 KiB
C
1600 lines
44 KiB
C
/*
|
|
* Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
|
|
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
|
|
*
|
|
* This software is available to you under a choice of one of two
|
|
* licenses. You may choose to be licensed under the terms of the GNU
|
|
* General Public License (GPL) Version 2, available from the file
|
|
* COPYING in the main directory of this source tree, or the
|
|
* OpenIB.org BSD license below:
|
|
*
|
|
* Redistribution and use in source and binary forms, with or
|
|
* without modification, are permitted provided that the following
|
|
* conditions are met:
|
|
*
|
|
* - Redistributions of source code must retain the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer.
|
|
*
|
|
* - Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials
|
|
* provided with the distribution.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
|
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
|
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
|
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*/
|
|
|
|
#include <rdma/ib_smi.h>
|
|
|
|
#include "ipath_kernel.h"
|
|
#include "ipath_verbs.h"
|
|
#include "ipath_common.h"
|
|
|
|
#define IB_SMP_UNSUP_VERSION __constant_htons(0x0004)
|
|
#define IB_SMP_UNSUP_METHOD __constant_htons(0x0008)
|
|
#define IB_SMP_UNSUP_METH_ATTR __constant_htons(0x000C)
|
|
#define IB_SMP_INVALID_FIELD __constant_htons(0x001C)
|
|
|
|
static int reply(struct ib_smp *smp)
|
|
{
|
|
/*
|
|
* The verbs framework will handle the directed/LID route
|
|
* packet changes.
|
|
*/
|
|
smp->method = IB_MGMT_METHOD_GET_RESP;
|
|
if (smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE)
|
|
smp->status |= IB_SMP_DIRECTION;
|
|
return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
|
|
}
|
|
|
|
static int recv_subn_get_nodedescription(struct ib_smp *smp,
|
|
struct ib_device *ibdev)
|
|
{
|
|
if (smp->attr_mod)
|
|
smp->status |= IB_SMP_INVALID_FIELD;
|
|
|
|
strncpy(smp->data, ibdev->node_desc, sizeof(smp->data));
|
|
|
|
return reply(smp);
|
|
}
|
|
|
|
struct nodeinfo {
|
|
u8 base_version;
|
|
u8 class_version;
|
|
u8 node_type;
|
|
u8 num_ports;
|
|
__be64 sys_guid;
|
|
__be64 node_guid;
|
|
__be64 port_guid;
|
|
__be16 partition_cap;
|
|
__be16 device_id;
|
|
__be32 revision;
|
|
u8 local_port_num;
|
|
u8 vendor_id[3];
|
|
} __attribute__ ((packed));
|
|
|
|
static int recv_subn_get_nodeinfo(struct ib_smp *smp,
|
|
struct ib_device *ibdev, u8 port)
|
|
{
|
|
struct nodeinfo *nip = (struct nodeinfo *)&smp->data;
|
|
struct ipath_devdata *dd = to_idev(ibdev)->dd;
|
|
u32 vendor, majrev, minrev;
|
|
|
|
/* GUID 0 is illegal */
|
|
if (smp->attr_mod || (dd->ipath_guid == 0))
|
|
smp->status |= IB_SMP_INVALID_FIELD;
|
|
|
|
nip->base_version = 1;
|
|
nip->class_version = 1;
|
|
nip->node_type = 1; /* channel adapter */
|
|
/*
|
|
* XXX The num_ports value will need a layer function to get
|
|
* the value if we ever have more than one IB port on a chip.
|
|
* We will also need to get the GUID for the port.
|
|
*/
|
|
nip->num_ports = ibdev->phys_port_cnt;
|
|
/* This is already in network order */
|
|
nip->sys_guid = to_idev(ibdev)->sys_image_guid;
|
|
nip->node_guid = dd->ipath_guid;
|
|
nip->port_guid = dd->ipath_guid;
|
|
nip->partition_cap = cpu_to_be16(ipath_get_npkeys(dd));
|
|
nip->device_id = cpu_to_be16(dd->ipath_deviceid);
|
|
majrev = dd->ipath_majrev;
|
|
minrev = dd->ipath_minrev;
|
|
nip->revision = cpu_to_be32((majrev << 16) | minrev);
|
|
nip->local_port_num = port;
|
|
vendor = dd->ipath_vendorid;
|
|
nip->vendor_id[0] = 0;
|
|
nip->vendor_id[1] = vendor >> 8;
|
|
nip->vendor_id[2] = vendor;
|
|
|
|
return reply(smp);
|
|
}
|
|
|
|
static int recv_subn_get_guidinfo(struct ib_smp *smp,
|
|
struct ib_device *ibdev)
|
|
{
|
|
u32 startgx = 8 * be32_to_cpu(smp->attr_mod);
|
|
__be64 *p = (__be64 *) smp->data;
|
|
|
|
/* 32 blocks of 8 64-bit GUIDs per block */
|
|
|
|
memset(smp->data, 0, sizeof(smp->data));
|
|
|
|
/*
|
|
* We only support one GUID for now. If this changes, the
|
|
* portinfo.guid_cap field needs to be updated too.
|
|
*/
|
|
if (startgx == 0) {
|
|
__be64 g = to_idev(ibdev)->dd->ipath_guid;
|
|
if (g == 0)
|
|
/* GUID 0 is illegal */
|
|
smp->status |= IB_SMP_INVALID_FIELD;
|
|
else
|
|
/* The first is a copy of the read-only HW GUID. */
|
|
*p = g;
|
|
} else
|
|
smp->status |= IB_SMP_INVALID_FIELD;
|
|
|
|
return reply(smp);
|
|
}
|
|
|
|
|
|
static int get_overrunthreshold(struct ipath_devdata *dd)
|
|
{
|
|
return (dd->ipath_ibcctrl >>
|
|
INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT) &
|
|
INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK;
|
|
}
|
|
|
|
/**
|
|
* set_overrunthreshold - set the overrun threshold
|
|
* @dd: the infinipath device
|
|
* @n: the new threshold
|
|
*
|
|
* Note that this will only take effect when the link state changes.
|
|
*/
|
|
static int set_overrunthreshold(struct ipath_devdata *dd, unsigned n)
|
|
{
|
|
unsigned v;
|
|
|
|
v = (dd->ipath_ibcctrl >> INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT) &
|
|
INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK;
|
|
if (v != n) {
|
|
dd->ipath_ibcctrl &=
|
|
~(INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK <<
|
|
INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT);
|
|
dd->ipath_ibcctrl |=
|
|
(u64) n << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT;
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
|
|
dd->ipath_ibcctrl);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int get_phyerrthreshold(struct ipath_devdata *dd)
|
|
{
|
|
return (dd->ipath_ibcctrl >>
|
|
INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
|
|
INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;
|
|
}
|
|
|
|
/**
|
|
* set_phyerrthreshold - set the physical error threshold
|
|
* @dd: the infinipath device
|
|
* @n: the new threshold
|
|
*
|
|
* Note that this will only take effect when the link state changes.
|
|
*/
|
|
static int set_phyerrthreshold(struct ipath_devdata *dd, unsigned n)
|
|
{
|
|
unsigned v;
|
|
|
|
v = (dd->ipath_ibcctrl >> INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
|
|
INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;
|
|
if (v != n) {
|
|
dd->ipath_ibcctrl &=
|
|
~(INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK <<
|
|
INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT);
|
|
dd->ipath_ibcctrl |=
|
|
(u64) n << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT;
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
|
|
dd->ipath_ibcctrl);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* get_linkdowndefaultstate - get the default linkdown state
|
|
* @dd: the infinipath device
|
|
*
|
|
* Returns zero if the default is POLL, 1 if the default is SLEEP.
|
|
*/
|
|
static int get_linkdowndefaultstate(struct ipath_devdata *dd)
|
|
{
|
|
return !!(dd->ipath_ibcctrl & INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE);
|
|
}
|
|
|
|
static int recv_subn_get_portinfo(struct ib_smp *smp,
|
|
struct ib_device *ibdev, u8 port)
|
|
{
|
|
struct ipath_ibdev *dev;
|
|
struct ib_port_info *pip = (struct ib_port_info *)smp->data;
|
|
u16 lid;
|
|
u8 ibcstat;
|
|
u8 mtu;
|
|
int ret;
|
|
|
|
if (be32_to_cpu(smp->attr_mod) > ibdev->phys_port_cnt) {
|
|
smp->status |= IB_SMP_INVALID_FIELD;
|
|
ret = reply(smp);
|
|
goto bail;
|
|
}
|
|
|
|
dev = to_idev(ibdev);
|
|
|
|
/* Clear all fields. Only set the non-zero fields. */
|
|
memset(smp->data, 0, sizeof(smp->data));
|
|
|
|
/* Only return the mkey if the protection field allows it. */
|
|
if (smp->method == IB_MGMT_METHOD_SET || dev->mkey == smp->mkey ||
|
|
dev->mkeyprot == 0)
|
|
pip->mkey = dev->mkey;
|
|
pip->gid_prefix = dev->gid_prefix;
|
|
lid = dev->dd->ipath_lid;
|
|
pip->lid = lid ? cpu_to_be16(lid) : IB_LID_PERMISSIVE;
|
|
pip->sm_lid = cpu_to_be16(dev->sm_lid);
|
|
pip->cap_mask = cpu_to_be32(dev->port_cap_flags);
|
|
/* pip->diag_code; */
|
|
pip->mkey_lease_period = cpu_to_be16(dev->mkey_lease_period);
|
|
pip->local_port_num = port;
|
|
pip->link_width_enabled = dev->link_width_enabled;
|
|
pip->link_width_supported = 3; /* 1x or 4x */
|
|
pip->link_width_active = 2; /* 4x */
|
|
pip->linkspeed_portstate = 0x10; /* 2.5Gbps */
|
|
ibcstat = dev->dd->ipath_lastibcstat;
|
|
pip->linkspeed_portstate |= ((ibcstat >> 4) & 0x3) + 1;
|
|
pip->portphysstate_linkdown =
|
|
(ipath_cvt_physportstate[ibcstat & 0xf] << 4) |
|
|
(get_linkdowndefaultstate(dev->dd) ? 1 : 2);
|
|
pip->mkeyprot_resv_lmc = (dev->mkeyprot << 6) | dev->dd->ipath_lmc;
|
|
pip->linkspeedactive_enabled = 0x11; /* 2.5Gbps, 2.5Gbps */
|
|
switch (dev->dd->ipath_ibmtu) {
|
|
case 4096:
|
|
mtu = IB_MTU_4096;
|
|
break;
|
|
case 2048:
|
|
mtu = IB_MTU_2048;
|
|
break;
|
|
case 1024:
|
|
mtu = IB_MTU_1024;
|
|
break;
|
|
case 512:
|
|
mtu = IB_MTU_512;
|
|
break;
|
|
case 256:
|
|
mtu = IB_MTU_256;
|
|
break;
|
|
default: /* oops, something is wrong */
|
|
mtu = IB_MTU_2048;
|
|
break;
|
|
}
|
|
pip->neighbormtu_mastersmsl = (mtu << 4) | dev->sm_sl;
|
|
pip->vlcap_inittype = 0x10; /* VLCap = VL0, InitType = 0 */
|
|
pip->vl_high_limit = dev->vl_high_limit;
|
|
/* pip->vl_arb_high_cap; // only one VL */
|
|
/* pip->vl_arb_low_cap; // only one VL */
|
|
/* InitTypeReply = 0 */
|
|
/*
|
|
* Note: the chips support a maximum MTU of 4096, but the driver
|
|
* hasn't implemented this feature yet, so set the maximum value
|
|
* to 2048.
|
|
*/
|
|
pip->inittypereply_mtucap = IB_MTU_2048;
|
|
// HCAs ignore VLStallCount and HOQLife
|
|
/* pip->vlstallcnt_hoqlife; */
|
|
pip->operationalvl_pei_peo_fpi_fpo = 0x10; /* OVLs = 1 */
|
|
pip->mkey_violations = cpu_to_be16(dev->mkey_violations);
|
|
/* P_KeyViolations are counted by hardware. */
|
|
pip->pkey_violations =
|
|
cpu_to_be16((ipath_get_cr_errpkey(dev->dd) -
|
|
dev->z_pkey_violations) & 0xFFFF);
|
|
pip->qkey_violations = cpu_to_be16(dev->qkey_violations);
|
|
/* Only the hardware GUID is supported for now */
|
|
pip->guid_cap = 1;
|
|
pip->clientrereg_resv_subnetto = dev->subnet_timeout;
|
|
/* 32.768 usec. response time (guessing) */
|
|
pip->resv_resptimevalue = 3;
|
|
pip->localphyerrors_overrunerrors =
|
|
(get_phyerrthreshold(dev->dd) << 4) |
|
|
get_overrunthreshold(dev->dd);
|
|
/* pip->max_credit_hint; */
|
|
/* pip->link_roundtrip_latency[3]; */
|
|
|
|
ret = reply(smp);
|
|
|
|
bail:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* get_pkeys - return the PKEY table for port 0
|
|
* @dd: the infinipath device
|
|
* @pkeys: the pkey table is placed here
|
|
*/
|
|
static int get_pkeys(struct ipath_devdata *dd, u16 * pkeys)
|
|
{
|
|
struct ipath_portdata *pd = dd->ipath_pd[0];
|
|
|
|
memcpy(pkeys, pd->port_pkeys, sizeof(pd->port_pkeys));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int recv_subn_get_pkeytable(struct ib_smp *smp,
|
|
struct ib_device *ibdev)
|
|
{
|
|
u32 startpx = 32 * (be32_to_cpu(smp->attr_mod) & 0xffff);
|
|
u16 *p = (u16 *) smp->data;
|
|
__be16 *q = (__be16 *) smp->data;
|
|
|
|
/* 64 blocks of 32 16-bit P_Key entries */
|
|
|
|
memset(smp->data, 0, sizeof(smp->data));
|
|
if (startpx == 0) {
|
|
struct ipath_ibdev *dev = to_idev(ibdev);
|
|
unsigned i, n = ipath_get_npkeys(dev->dd);
|
|
|
|
get_pkeys(dev->dd, p);
|
|
|
|
for (i = 0; i < n; i++)
|
|
q[i] = cpu_to_be16(p[i]);
|
|
} else
|
|
smp->status |= IB_SMP_INVALID_FIELD;
|
|
|
|
return reply(smp);
|
|
}
|
|
|
|
static int recv_subn_set_guidinfo(struct ib_smp *smp,
|
|
struct ib_device *ibdev)
|
|
{
|
|
/* The only GUID we support is the first read-only entry. */
|
|
return recv_subn_get_guidinfo(smp, ibdev);
|
|
}
|
|
|
|
/**
|
|
* set_linkdowndefaultstate - set the default linkdown state
|
|
* @dd: the infinipath device
|
|
* @sleep: the new state
|
|
*
|
|
* Note that this will only take effect when the link state changes.
|
|
*/
|
|
static int set_linkdowndefaultstate(struct ipath_devdata *dd, int sleep)
|
|
{
|
|
if (sleep)
|
|
dd->ipath_ibcctrl |= INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE;
|
|
else
|
|
dd->ipath_ibcctrl &= ~INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE;
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
|
|
dd->ipath_ibcctrl);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* recv_subn_set_portinfo - set port information
|
|
* @smp: the incoming SM packet
|
|
* @ibdev: the infiniband device
|
|
* @port: the port on the device
|
|
*
|
|
* Set Portinfo (see ch. 14.2.5.6).
|
|
*/
|
|
static int recv_subn_set_portinfo(struct ib_smp *smp,
|
|
struct ib_device *ibdev, u8 port)
|
|
{
|
|
struct ib_port_info *pip = (struct ib_port_info *)smp->data;
|
|
struct ib_event event;
|
|
struct ipath_ibdev *dev;
|
|
struct ipath_devdata *dd;
|
|
char clientrereg = 0;
|
|
u16 lid, smlid;
|
|
u8 lwe;
|
|
u8 lse;
|
|
u8 state;
|
|
u16 lstate;
|
|
u32 mtu;
|
|
int ret, ore;
|
|
|
|
if (be32_to_cpu(smp->attr_mod) > ibdev->phys_port_cnt)
|
|
goto err;
|
|
|
|
dev = to_idev(ibdev);
|
|
dd = dev->dd;
|
|
event.device = ibdev;
|
|
event.element.port_num = port;
|
|
|
|
dev->mkey = pip->mkey;
|
|
dev->gid_prefix = pip->gid_prefix;
|
|
dev->mkey_lease_period = be16_to_cpu(pip->mkey_lease_period);
|
|
|
|
lid = be16_to_cpu(pip->lid);
|
|
if (dd->ipath_lid != lid ||
|
|
dd->ipath_lmc != (pip->mkeyprot_resv_lmc & 7)) {
|
|
/* Must be a valid unicast LID address. */
|
|
if (lid == 0 || lid >= IPATH_MULTICAST_LID_BASE)
|
|
goto err;
|
|
ipath_set_lid(dd, lid, pip->mkeyprot_resv_lmc & 7);
|
|
event.event = IB_EVENT_LID_CHANGE;
|
|
ib_dispatch_event(&event);
|
|
}
|
|
|
|
smlid = be16_to_cpu(pip->sm_lid);
|
|
if (smlid != dev->sm_lid) {
|
|
/* Must be a valid unicast LID address. */
|
|
if (smlid == 0 || smlid >= IPATH_MULTICAST_LID_BASE)
|
|
goto err;
|
|
dev->sm_lid = smlid;
|
|
event.event = IB_EVENT_SM_CHANGE;
|
|
ib_dispatch_event(&event);
|
|
}
|
|
|
|
/* Only 4x supported but allow 1x or 4x to be set (see 14.2.6.6). */
|
|
lwe = pip->link_width_enabled;
|
|
if ((lwe >= 4 && lwe <= 8) || (lwe >= 0xC && lwe <= 0xFE))
|
|
goto err;
|
|
if (lwe == 0xFF)
|
|
dev->link_width_enabled = 3; /* 1x or 4x */
|
|
else if (lwe)
|
|
dev->link_width_enabled = lwe;
|
|
|
|
/* Only 2.5 Gbs supported. */
|
|
lse = pip->linkspeedactive_enabled & 0xF;
|
|
if (lse >= 2 && lse <= 0xE)
|
|
goto err;
|
|
|
|
/* Set link down default state. */
|
|
switch (pip->portphysstate_linkdown & 0xF) {
|
|
case 0: /* NOP */
|
|
break;
|
|
case 1: /* SLEEP */
|
|
if (set_linkdowndefaultstate(dd, 1))
|
|
goto err;
|
|
break;
|
|
case 2: /* POLL */
|
|
if (set_linkdowndefaultstate(dd, 0))
|
|
goto err;
|
|
break;
|
|
default:
|
|
goto err;
|
|
}
|
|
|
|
dev->mkeyprot = pip->mkeyprot_resv_lmc >> 6;
|
|
dev->vl_high_limit = pip->vl_high_limit;
|
|
|
|
switch ((pip->neighbormtu_mastersmsl >> 4) & 0xF) {
|
|
case IB_MTU_256:
|
|
mtu = 256;
|
|
break;
|
|
case IB_MTU_512:
|
|
mtu = 512;
|
|
break;
|
|
case IB_MTU_1024:
|
|
mtu = 1024;
|
|
break;
|
|
case IB_MTU_2048:
|
|
mtu = 2048;
|
|
break;
|
|
case IB_MTU_4096:
|
|
mtu = 4096;
|
|
break;
|
|
default:
|
|
/* XXX We have already partially updated our state! */
|
|
goto err;
|
|
}
|
|
ipath_set_mtu(dd, mtu);
|
|
|
|
dev->sm_sl = pip->neighbormtu_mastersmsl & 0xF;
|
|
|
|
/* We only support VL0 */
|
|
if (((pip->operationalvl_pei_peo_fpi_fpo >> 4) & 0xF) > 1)
|
|
goto err;
|
|
|
|
if (pip->mkey_violations == 0)
|
|
dev->mkey_violations = 0;
|
|
|
|
/*
|
|
* Hardware counter can't be reset so snapshot and subtract
|
|
* later.
|
|
*/
|
|
if (pip->pkey_violations == 0)
|
|
dev->z_pkey_violations = ipath_get_cr_errpkey(dd);
|
|
|
|
if (pip->qkey_violations == 0)
|
|
dev->qkey_violations = 0;
|
|
|
|
ore = pip->localphyerrors_overrunerrors;
|
|
if (set_phyerrthreshold(dd, (ore >> 4) & 0xF))
|
|
goto err;
|
|
|
|
if (set_overrunthreshold(dd, (ore & 0xF)))
|
|
goto err;
|
|
|
|
dev->subnet_timeout = pip->clientrereg_resv_subnetto & 0x1F;
|
|
|
|
if (pip->clientrereg_resv_subnetto & 0x80) {
|
|
clientrereg = 1;
|
|
event.event = IB_EVENT_CLIENT_REREGISTER;
|
|
ib_dispatch_event(&event);
|
|
}
|
|
|
|
/*
|
|
* Do the port state change now that the other link parameters
|
|
* have been set.
|
|
* Changing the port physical state only makes sense if the link
|
|
* is down or is being set to down.
|
|
*/
|
|
state = pip->linkspeed_portstate & 0xF;
|
|
lstate = (pip->portphysstate_linkdown >> 4) & 0xF;
|
|
if (lstate && !(state == IB_PORT_DOWN || state == IB_PORT_NOP))
|
|
goto err;
|
|
|
|
/*
|
|
* Only state changes of DOWN, ARM, and ACTIVE are valid
|
|
* and must be in the correct state to take effect (see 7.2.6).
|
|
*/
|
|
switch (state) {
|
|
case IB_PORT_NOP:
|
|
if (lstate == 0)
|
|
break;
|
|
/* FALLTHROUGH */
|
|
case IB_PORT_DOWN:
|
|
if (lstate == 0)
|
|
lstate = IPATH_IB_LINKDOWN_ONLY;
|
|
else if (lstate == 1)
|
|
lstate = IPATH_IB_LINKDOWN_SLEEP;
|
|
else if (lstate == 2)
|
|
lstate = IPATH_IB_LINKDOWN;
|
|
else if (lstate == 3)
|
|
lstate = IPATH_IB_LINKDOWN_DISABLE;
|
|
else
|
|
goto err;
|
|
ipath_set_linkstate(dd, lstate);
|
|
ipath_wait_linkstate(dd, IPATH_LINKINIT | IPATH_LINKARMED |
|
|
IPATH_LINKACTIVE, 1000);
|
|
break;
|
|
case IB_PORT_ARMED:
|
|
ipath_set_linkstate(dd, IPATH_IB_LINKARM);
|
|
break;
|
|
case IB_PORT_ACTIVE:
|
|
ipath_set_linkstate(dd, IPATH_IB_LINKACTIVE);
|
|
break;
|
|
default:
|
|
/* XXX We have already partially updated our state! */
|
|
goto err;
|
|
}
|
|
|
|
ret = recv_subn_get_portinfo(smp, ibdev, port);
|
|
|
|
if (clientrereg)
|
|
pip->clientrereg_resv_subnetto |= 0x80;
|
|
|
|
goto done;
|
|
|
|
err:
|
|
smp->status |= IB_SMP_INVALID_FIELD;
|
|
ret = recv_subn_get_portinfo(smp, ibdev, port);
|
|
|
|
done:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* rm_pkey - decrecment the reference count for the given PKEY
|
|
* @dd: the infinipath device
|
|
* @key: the PKEY index
|
|
*
|
|
* Return true if this was the last reference and the hardware table entry
|
|
* needs to be changed.
|
|
*/
|
|
static int rm_pkey(struct ipath_devdata *dd, u16 key)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
|
|
if (dd->ipath_pkeys[i] != key)
|
|
continue;
|
|
if (atomic_dec_and_test(&dd->ipath_pkeyrefs[i])) {
|
|
dd->ipath_pkeys[i] = 0;
|
|
ret = 1;
|
|
goto bail;
|
|
}
|
|
break;
|
|
}
|
|
|
|
ret = 0;
|
|
|
|
bail:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* add_pkey - add the given PKEY to the hardware table
|
|
* @dd: the infinipath device
|
|
* @key: the PKEY
|
|
*
|
|
* Return an error code if unable to add the entry, zero if no change,
|
|
* or 1 if the hardware PKEY register needs to be updated.
|
|
*/
|
|
static int add_pkey(struct ipath_devdata *dd, u16 key)
|
|
{
|
|
int i;
|
|
u16 lkey = key & 0x7FFF;
|
|
int any = 0;
|
|
int ret;
|
|
|
|
if (lkey == 0x7FFF) {
|
|
ret = 0;
|
|
goto bail;
|
|
}
|
|
|
|
/* Look for an empty slot or a matching PKEY. */
|
|
for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
|
|
if (!dd->ipath_pkeys[i]) {
|
|
any++;
|
|
continue;
|
|
}
|
|
/* If it matches exactly, try to increment the ref count */
|
|
if (dd->ipath_pkeys[i] == key) {
|
|
if (atomic_inc_return(&dd->ipath_pkeyrefs[i]) > 1) {
|
|
ret = 0;
|
|
goto bail;
|
|
}
|
|
/* Lost the race. Look for an empty slot below. */
|
|
atomic_dec(&dd->ipath_pkeyrefs[i]);
|
|
any++;
|
|
}
|
|
/*
|
|
* It makes no sense to have both the limited and unlimited
|
|
* PKEY set at the same time since the unlimited one will
|
|
* disable the limited one.
|
|
*/
|
|
if ((dd->ipath_pkeys[i] & 0x7FFF) == lkey) {
|
|
ret = -EEXIST;
|
|
goto bail;
|
|
}
|
|
}
|
|
if (!any) {
|
|
ret = -EBUSY;
|
|
goto bail;
|
|
}
|
|
for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
|
|
if (!dd->ipath_pkeys[i] &&
|
|
atomic_inc_return(&dd->ipath_pkeyrefs[i]) == 1) {
|
|
/* for ipathstats, etc. */
|
|
ipath_stats.sps_pkeys[i] = lkey;
|
|
dd->ipath_pkeys[i] = key;
|
|
ret = 1;
|
|
goto bail;
|
|
}
|
|
}
|
|
ret = -EBUSY;
|
|
|
|
bail:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* set_pkeys - set the PKEY table for port 0
|
|
* @dd: the infinipath device
|
|
* @pkeys: the PKEY table
|
|
*/
|
|
static int set_pkeys(struct ipath_devdata *dd, u16 *pkeys)
|
|
{
|
|
struct ipath_portdata *pd;
|
|
int i;
|
|
int changed = 0;
|
|
|
|
pd = dd->ipath_pd[0];
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
|
|
u16 key = pkeys[i];
|
|
u16 okey = pd->port_pkeys[i];
|
|
|
|
if (key == okey)
|
|
continue;
|
|
/*
|
|
* The value of this PKEY table entry is changing.
|
|
* Remove the old entry in the hardware's array of PKEYs.
|
|
*/
|
|
if (okey & 0x7FFF)
|
|
changed |= rm_pkey(dd, okey);
|
|
if (key & 0x7FFF) {
|
|
int ret = add_pkey(dd, key);
|
|
|
|
if (ret < 0)
|
|
key = 0;
|
|
else
|
|
changed |= ret;
|
|
}
|
|
pd->port_pkeys[i] = key;
|
|
}
|
|
if (changed) {
|
|
u64 pkey;
|
|
|
|
pkey = (u64) dd->ipath_pkeys[0] |
|
|
((u64) dd->ipath_pkeys[1] << 16) |
|
|
((u64) dd->ipath_pkeys[2] << 32) |
|
|
((u64) dd->ipath_pkeys[3] << 48);
|
|
ipath_cdbg(VERBOSE, "p0 new pkey reg %llx\n",
|
|
(unsigned long long) pkey);
|
|
ipath_write_kreg(dd, dd->ipath_kregs->kr_partitionkey,
|
|
pkey);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int recv_subn_set_pkeytable(struct ib_smp *smp,
|
|
struct ib_device *ibdev)
|
|
{
|
|
u32 startpx = 32 * (be32_to_cpu(smp->attr_mod) & 0xffff);
|
|
__be16 *p = (__be16 *) smp->data;
|
|
u16 *q = (u16 *) smp->data;
|
|
struct ipath_ibdev *dev = to_idev(ibdev);
|
|
unsigned i, n = ipath_get_npkeys(dev->dd);
|
|
|
|
for (i = 0; i < n; i++)
|
|
q[i] = be16_to_cpu(p[i]);
|
|
|
|
if (startpx != 0 || set_pkeys(dev->dd, q) != 0)
|
|
smp->status |= IB_SMP_INVALID_FIELD;
|
|
|
|
return recv_subn_get_pkeytable(smp, ibdev);
|
|
}
|
|
|
|
#define IB_PMA_CLASS_PORT_INFO __constant_htons(0x0001)
|
|
#define IB_PMA_PORT_SAMPLES_CONTROL __constant_htons(0x0010)
|
|
#define IB_PMA_PORT_SAMPLES_RESULT __constant_htons(0x0011)
|
|
#define IB_PMA_PORT_COUNTERS __constant_htons(0x0012)
|
|
#define IB_PMA_PORT_COUNTERS_EXT __constant_htons(0x001D)
|
|
#define IB_PMA_PORT_SAMPLES_RESULT_EXT __constant_htons(0x001E)
|
|
|
|
struct ib_perf {
|
|
u8 base_version;
|
|
u8 mgmt_class;
|
|
u8 class_version;
|
|
u8 method;
|
|
__be16 status;
|
|
__be16 unused;
|
|
__be64 tid;
|
|
__be16 attr_id;
|
|
__be16 resv;
|
|
__be32 attr_mod;
|
|
u8 reserved[40];
|
|
u8 data[192];
|
|
} __attribute__ ((packed));
|
|
|
|
struct ib_pma_classportinfo {
|
|
u8 base_version;
|
|
u8 class_version;
|
|
__be16 cap_mask;
|
|
u8 reserved[3];
|
|
u8 resp_time_value; /* only lower 5 bits */
|
|
union ib_gid redirect_gid;
|
|
__be32 redirect_tc_sl_fl; /* 8, 4, 20 bits respectively */
|
|
__be16 redirect_lid;
|
|
__be16 redirect_pkey;
|
|
__be32 redirect_qp; /* only lower 24 bits */
|
|
__be32 redirect_qkey;
|
|
union ib_gid trap_gid;
|
|
__be32 trap_tc_sl_fl; /* 8, 4, 20 bits respectively */
|
|
__be16 trap_lid;
|
|
__be16 trap_pkey;
|
|
__be32 trap_hl_qp; /* 8, 24 bits respectively */
|
|
__be32 trap_qkey;
|
|
} __attribute__ ((packed));
|
|
|
|
struct ib_pma_portsamplescontrol {
|
|
u8 opcode;
|
|
u8 port_select;
|
|
u8 tick;
|
|
u8 counter_width; /* only lower 3 bits */
|
|
__be32 counter_mask0_9; /* 2, 10 * 3, bits */
|
|
__be16 counter_mask10_14; /* 1, 5 * 3, bits */
|
|
u8 sample_mechanisms;
|
|
u8 sample_status; /* only lower 2 bits */
|
|
__be64 option_mask;
|
|
__be64 vendor_mask;
|
|
__be32 sample_start;
|
|
__be32 sample_interval;
|
|
__be16 tag;
|
|
__be16 counter_select[15];
|
|
} __attribute__ ((packed));
|
|
|
|
struct ib_pma_portsamplesresult {
|
|
__be16 tag;
|
|
__be16 sample_status; /* only lower 2 bits */
|
|
__be32 counter[15];
|
|
} __attribute__ ((packed));
|
|
|
|
struct ib_pma_portsamplesresult_ext {
|
|
__be16 tag;
|
|
__be16 sample_status; /* only lower 2 bits */
|
|
__be32 extended_width; /* only upper 2 bits */
|
|
__be64 counter[15];
|
|
} __attribute__ ((packed));
|
|
|
|
struct ib_pma_portcounters {
|
|
u8 reserved;
|
|
u8 port_select;
|
|
__be16 counter_select;
|
|
__be16 symbol_error_counter;
|
|
u8 link_error_recovery_counter;
|
|
u8 link_downed_counter;
|
|
__be16 port_rcv_errors;
|
|
__be16 port_rcv_remphys_errors;
|
|
__be16 port_rcv_switch_relay_errors;
|
|
__be16 port_xmit_discards;
|
|
u8 port_xmit_constraint_errors;
|
|
u8 port_rcv_constraint_errors;
|
|
u8 reserved1;
|
|
u8 lli_ebor_errors; /* 4, 4, bits */
|
|
__be16 reserved2;
|
|
__be16 vl15_dropped;
|
|
__be32 port_xmit_data;
|
|
__be32 port_rcv_data;
|
|
__be32 port_xmit_packets;
|
|
__be32 port_rcv_packets;
|
|
} __attribute__ ((packed));
|
|
|
|
#define IB_PMA_SEL_SYMBOL_ERROR __constant_htons(0x0001)
|
|
#define IB_PMA_SEL_LINK_ERROR_RECOVERY __constant_htons(0x0002)
|
|
#define IB_PMA_SEL_LINK_DOWNED __constant_htons(0x0004)
|
|
#define IB_PMA_SEL_PORT_RCV_ERRORS __constant_htons(0x0008)
|
|
#define IB_PMA_SEL_PORT_RCV_REMPHYS_ERRORS __constant_htons(0x0010)
|
|
#define IB_PMA_SEL_PORT_XMIT_DISCARDS __constant_htons(0x0040)
|
|
#define IB_PMA_SEL_LOCAL_LINK_INTEGRITY_ERRORS __constant_htons(0x0200)
|
|
#define IB_PMA_SEL_EXCESSIVE_BUFFER_OVERRUNS __constant_htons(0x0400)
|
|
#define IB_PMA_SEL_PORT_VL15_DROPPED __constant_htons(0x0800)
|
|
#define IB_PMA_SEL_PORT_XMIT_DATA __constant_htons(0x1000)
|
|
#define IB_PMA_SEL_PORT_RCV_DATA __constant_htons(0x2000)
|
|
#define IB_PMA_SEL_PORT_XMIT_PACKETS __constant_htons(0x4000)
|
|
#define IB_PMA_SEL_PORT_RCV_PACKETS __constant_htons(0x8000)
|
|
|
|
struct ib_pma_portcounters_ext {
|
|
u8 reserved;
|
|
u8 port_select;
|
|
__be16 counter_select;
|
|
__be32 reserved1;
|
|
__be64 port_xmit_data;
|
|
__be64 port_rcv_data;
|
|
__be64 port_xmit_packets;
|
|
__be64 port_rcv_packets;
|
|
__be64 port_unicast_xmit_packets;
|
|
__be64 port_unicast_rcv_packets;
|
|
__be64 port_multicast_xmit_packets;
|
|
__be64 port_multicast_rcv_packets;
|
|
} __attribute__ ((packed));
|
|
|
|
#define IB_PMA_SELX_PORT_XMIT_DATA __constant_htons(0x0001)
|
|
#define IB_PMA_SELX_PORT_RCV_DATA __constant_htons(0x0002)
|
|
#define IB_PMA_SELX_PORT_XMIT_PACKETS __constant_htons(0x0004)
|
|
#define IB_PMA_SELX_PORT_RCV_PACKETS __constant_htons(0x0008)
|
|
#define IB_PMA_SELX_PORT_UNI_XMIT_PACKETS __constant_htons(0x0010)
|
|
#define IB_PMA_SELX_PORT_UNI_RCV_PACKETS __constant_htons(0x0020)
|
|
#define IB_PMA_SELX_PORT_MULTI_XMIT_PACKETS __constant_htons(0x0040)
|
|
#define IB_PMA_SELX_PORT_MULTI_RCV_PACKETS __constant_htons(0x0080)
|
|
|
|
static int recv_pma_get_classportinfo(struct ib_perf *pmp)
|
|
{
|
|
struct ib_pma_classportinfo *p =
|
|
(struct ib_pma_classportinfo *)pmp->data;
|
|
|
|
memset(pmp->data, 0, sizeof(pmp->data));
|
|
|
|
if (pmp->attr_mod != 0)
|
|
pmp->status |= IB_SMP_INVALID_FIELD;
|
|
|
|
/* Indicate AllPortSelect is valid (only one port anyway) */
|
|
p->cap_mask = __constant_cpu_to_be16(1 << 8);
|
|
p->base_version = 1;
|
|
p->class_version = 1;
|
|
/*
|
|
* Expected response time is 4.096 usec. * 2^18 == 1.073741824
|
|
* sec.
|
|
*/
|
|
p->resp_time_value = 18;
|
|
|
|
return reply((struct ib_smp *) pmp);
|
|
}
|
|
|
|
/*
|
|
* The PortSamplesControl.CounterMasks field is an array of 3 bit fields
|
|
* which specify the N'th counter's capabilities. See ch. 16.1.3.2.
|
|
* We support 5 counters which only count the mandatory quantities.
|
|
*/
|
|
#define COUNTER_MASK(q, n) (q << ((9 - n) * 3))
|
|
#define COUNTER_MASK0_9 \
|
|
__constant_cpu_to_be32(COUNTER_MASK(1, 0) | \
|
|
COUNTER_MASK(1, 1) | \
|
|
COUNTER_MASK(1, 2) | \
|
|
COUNTER_MASK(1, 3) | \
|
|
COUNTER_MASK(1, 4))
|
|
|
|
static int recv_pma_get_portsamplescontrol(struct ib_perf *pmp,
|
|
struct ib_device *ibdev, u8 port)
|
|
{
|
|
struct ib_pma_portsamplescontrol *p =
|
|
(struct ib_pma_portsamplescontrol *)pmp->data;
|
|
struct ipath_ibdev *dev = to_idev(ibdev);
|
|
struct ipath_cregs const *crp = dev->dd->ipath_cregs;
|
|
unsigned long flags;
|
|
u8 port_select = p->port_select;
|
|
|
|
memset(pmp->data, 0, sizeof(pmp->data));
|
|
|
|
p->port_select = port_select;
|
|
if (pmp->attr_mod != 0 ||
|
|
(port_select != port && port_select != 0xFF))
|
|
pmp->status |= IB_SMP_INVALID_FIELD;
|
|
/*
|
|
* Ticks are 10x the link transfer period which for 2.5Gbs is 4
|
|
* nsec. 0 == 4 nsec., 1 == 8 nsec., ..., 255 == 1020 nsec. Sample
|
|
* intervals are counted in ticks. Since we use Linux timers, that
|
|
* count in jiffies, we can't sample for less than 1000 ticks if HZ
|
|
* == 1000 (4000 ticks if HZ is 250).
|
|
*/
|
|
/* XXX This is WRONG. */
|
|
p->tick = 250; /* 1 usec. */
|
|
p->counter_width = 4; /* 32 bit counters */
|
|
p->counter_mask0_9 = COUNTER_MASK0_9;
|
|
spin_lock_irqsave(&dev->pending_lock, flags);
|
|
if (crp->cr_psstat)
|
|
p->sample_status = ipath_read_creg32(dev->dd, crp->cr_psstat);
|
|
else
|
|
p->sample_status = dev->pma_sample_status;
|
|
p->sample_start = cpu_to_be32(dev->pma_sample_start);
|
|
p->sample_interval = cpu_to_be32(dev->pma_sample_interval);
|
|
p->tag = cpu_to_be16(dev->pma_tag);
|
|
p->counter_select[0] = dev->pma_counter_select[0];
|
|
p->counter_select[1] = dev->pma_counter_select[1];
|
|
p->counter_select[2] = dev->pma_counter_select[2];
|
|
p->counter_select[3] = dev->pma_counter_select[3];
|
|
p->counter_select[4] = dev->pma_counter_select[4];
|
|
spin_unlock_irqrestore(&dev->pending_lock, flags);
|
|
|
|
return reply((struct ib_smp *) pmp);
|
|
}
|
|
|
|
static int recv_pma_set_portsamplescontrol(struct ib_perf *pmp,
|
|
struct ib_device *ibdev, u8 port)
|
|
{
|
|
struct ib_pma_portsamplescontrol *p =
|
|
(struct ib_pma_portsamplescontrol *)pmp->data;
|
|
struct ipath_ibdev *dev = to_idev(ibdev);
|
|
struct ipath_cregs const *crp = dev->dd->ipath_cregs;
|
|
unsigned long flags;
|
|
u8 status;
|
|
int ret;
|
|
|
|
if (pmp->attr_mod != 0 ||
|
|
(p->port_select != port && p->port_select != 0xFF)) {
|
|
pmp->status |= IB_SMP_INVALID_FIELD;
|
|
ret = reply((struct ib_smp *) pmp);
|
|
goto bail;
|
|
}
|
|
|
|
spin_lock_irqsave(&dev->pending_lock, flags);
|
|
if (crp->cr_psstat)
|
|
status = ipath_read_creg32(dev->dd, crp->cr_psstat);
|
|
else
|
|
status = dev->pma_sample_status;
|
|
if (status == IB_PMA_SAMPLE_STATUS_DONE) {
|
|
dev->pma_sample_start = be32_to_cpu(p->sample_start);
|
|
dev->pma_sample_interval = be32_to_cpu(p->sample_interval);
|
|
dev->pma_tag = be16_to_cpu(p->tag);
|
|
dev->pma_counter_select[0] = p->counter_select[0];
|
|
dev->pma_counter_select[1] = p->counter_select[1];
|
|
dev->pma_counter_select[2] = p->counter_select[2];
|
|
dev->pma_counter_select[3] = p->counter_select[3];
|
|
dev->pma_counter_select[4] = p->counter_select[4];
|
|
if (crp->cr_psstat) {
|
|
ipath_write_creg(dev->dd, crp->cr_psinterval,
|
|
dev->pma_sample_interval);
|
|
ipath_write_creg(dev->dd, crp->cr_psstart,
|
|
dev->pma_sample_start);
|
|
} else
|
|
dev->pma_sample_status = IB_PMA_SAMPLE_STATUS_STARTED;
|
|
}
|
|
spin_unlock_irqrestore(&dev->pending_lock, flags);
|
|
|
|
ret = recv_pma_get_portsamplescontrol(pmp, ibdev, port);
|
|
|
|
bail:
|
|
return ret;
|
|
}
|
|
|
|
static u64 get_counter(struct ipath_ibdev *dev,
|
|
struct ipath_cregs const *crp,
|
|
__be16 sel)
|
|
{
|
|
u64 ret;
|
|
|
|
switch (sel) {
|
|
case IB_PMA_PORT_XMIT_DATA:
|
|
ret = (crp->cr_psxmitdatacount) ?
|
|
ipath_read_creg32(dev->dd, crp->cr_psxmitdatacount) :
|
|
dev->ipath_sword;
|
|
break;
|
|
case IB_PMA_PORT_RCV_DATA:
|
|
ret = (crp->cr_psrcvdatacount) ?
|
|
ipath_read_creg32(dev->dd, crp->cr_psrcvdatacount) :
|
|
dev->ipath_rword;
|
|
break;
|
|
case IB_PMA_PORT_XMIT_PKTS:
|
|
ret = (crp->cr_psxmitpktscount) ?
|
|
ipath_read_creg32(dev->dd, crp->cr_psxmitpktscount) :
|
|
dev->ipath_spkts;
|
|
break;
|
|
case IB_PMA_PORT_RCV_PKTS:
|
|
ret = (crp->cr_psrcvpktscount) ?
|
|
ipath_read_creg32(dev->dd, crp->cr_psrcvpktscount) :
|
|
dev->ipath_rpkts;
|
|
break;
|
|
case IB_PMA_PORT_XMIT_WAIT:
|
|
ret = (crp->cr_psxmitwaitcount) ?
|
|
ipath_read_creg32(dev->dd, crp->cr_psxmitwaitcount) :
|
|
dev->ipath_xmit_wait;
|
|
break;
|
|
default:
|
|
ret = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int recv_pma_get_portsamplesresult(struct ib_perf *pmp,
|
|
struct ib_device *ibdev)
|
|
{
|
|
struct ib_pma_portsamplesresult *p =
|
|
(struct ib_pma_portsamplesresult *)pmp->data;
|
|
struct ipath_ibdev *dev = to_idev(ibdev);
|
|
struct ipath_cregs const *crp = dev->dd->ipath_cregs;
|
|
u8 status;
|
|
int i;
|
|
|
|
memset(pmp->data, 0, sizeof(pmp->data));
|
|
p->tag = cpu_to_be16(dev->pma_tag);
|
|
if (crp->cr_psstat)
|
|
status = ipath_read_creg32(dev->dd, crp->cr_psstat);
|
|
else
|
|
status = dev->pma_sample_status;
|
|
p->sample_status = cpu_to_be16(status);
|
|
for (i = 0; i < ARRAY_SIZE(dev->pma_counter_select); i++)
|
|
p->counter[i] = (status != IB_PMA_SAMPLE_STATUS_DONE) ? 0 :
|
|
cpu_to_be32(
|
|
get_counter(dev, crp, dev->pma_counter_select[i]));
|
|
|
|
return reply((struct ib_smp *) pmp);
|
|
}
|
|
|
|
static int recv_pma_get_portsamplesresult_ext(struct ib_perf *pmp,
|
|
struct ib_device *ibdev)
|
|
{
|
|
struct ib_pma_portsamplesresult_ext *p =
|
|
(struct ib_pma_portsamplesresult_ext *)pmp->data;
|
|
struct ipath_ibdev *dev = to_idev(ibdev);
|
|
struct ipath_cregs const *crp = dev->dd->ipath_cregs;
|
|
u8 status;
|
|
int i;
|
|
|
|
memset(pmp->data, 0, sizeof(pmp->data));
|
|
p->tag = cpu_to_be16(dev->pma_tag);
|
|
if (crp->cr_psstat)
|
|
status = ipath_read_creg32(dev->dd, crp->cr_psstat);
|
|
else
|
|
status = dev->pma_sample_status;
|
|
p->sample_status = cpu_to_be16(status);
|
|
/* 64 bits */
|
|
p->extended_width = __constant_cpu_to_be32(0x80000000);
|
|
for (i = 0; i < ARRAY_SIZE(dev->pma_counter_select); i++)
|
|
p->counter[i] = (status != IB_PMA_SAMPLE_STATUS_DONE) ? 0 :
|
|
cpu_to_be64(
|
|
get_counter(dev, crp, dev->pma_counter_select[i]));
|
|
|
|
return reply((struct ib_smp *) pmp);
|
|
}
|
|
|
|
static int recv_pma_get_portcounters(struct ib_perf *pmp,
|
|
struct ib_device *ibdev, u8 port)
|
|
{
|
|
struct ib_pma_portcounters *p = (struct ib_pma_portcounters *)
|
|
pmp->data;
|
|
struct ipath_ibdev *dev = to_idev(ibdev);
|
|
struct ipath_verbs_counters cntrs;
|
|
u8 port_select = p->port_select;
|
|
|
|
ipath_get_counters(dev->dd, &cntrs);
|
|
|
|
/* Adjust counters for any resets done. */
|
|
cntrs.symbol_error_counter -= dev->z_symbol_error_counter;
|
|
cntrs.link_error_recovery_counter -=
|
|
dev->z_link_error_recovery_counter;
|
|
cntrs.link_downed_counter -= dev->z_link_downed_counter;
|
|
cntrs.port_rcv_errors += dev->rcv_errors;
|
|
cntrs.port_rcv_errors -= dev->z_port_rcv_errors;
|
|
cntrs.port_rcv_remphys_errors -= dev->z_port_rcv_remphys_errors;
|
|
cntrs.port_xmit_discards -= dev->z_port_xmit_discards;
|
|
cntrs.port_xmit_data -= dev->z_port_xmit_data;
|
|
cntrs.port_rcv_data -= dev->z_port_rcv_data;
|
|
cntrs.port_xmit_packets -= dev->z_port_xmit_packets;
|
|
cntrs.port_rcv_packets -= dev->z_port_rcv_packets;
|
|
cntrs.local_link_integrity_errors -=
|
|
dev->z_local_link_integrity_errors;
|
|
cntrs.excessive_buffer_overrun_errors -=
|
|
dev->z_excessive_buffer_overrun_errors;
|
|
cntrs.vl15_dropped -= dev->z_vl15_dropped;
|
|
cntrs.vl15_dropped += dev->n_vl15_dropped;
|
|
|
|
memset(pmp->data, 0, sizeof(pmp->data));
|
|
|
|
p->port_select = port_select;
|
|
if (pmp->attr_mod != 0 ||
|
|
(port_select != port && port_select != 0xFF))
|
|
pmp->status |= IB_SMP_INVALID_FIELD;
|
|
|
|
if (cntrs.symbol_error_counter > 0xFFFFUL)
|
|
p->symbol_error_counter = __constant_cpu_to_be16(0xFFFF);
|
|
else
|
|
p->symbol_error_counter =
|
|
cpu_to_be16((u16)cntrs.symbol_error_counter);
|
|
if (cntrs.link_error_recovery_counter > 0xFFUL)
|
|
p->link_error_recovery_counter = 0xFF;
|
|
else
|
|
p->link_error_recovery_counter =
|
|
(u8)cntrs.link_error_recovery_counter;
|
|
if (cntrs.link_downed_counter > 0xFFUL)
|
|
p->link_downed_counter = 0xFF;
|
|
else
|
|
p->link_downed_counter = (u8)cntrs.link_downed_counter;
|
|
if (cntrs.port_rcv_errors > 0xFFFFUL)
|
|
p->port_rcv_errors = __constant_cpu_to_be16(0xFFFF);
|
|
else
|
|
p->port_rcv_errors =
|
|
cpu_to_be16((u16) cntrs.port_rcv_errors);
|
|
if (cntrs.port_rcv_remphys_errors > 0xFFFFUL)
|
|
p->port_rcv_remphys_errors = __constant_cpu_to_be16(0xFFFF);
|
|
else
|
|
p->port_rcv_remphys_errors =
|
|
cpu_to_be16((u16)cntrs.port_rcv_remphys_errors);
|
|
if (cntrs.port_xmit_discards > 0xFFFFUL)
|
|
p->port_xmit_discards = __constant_cpu_to_be16(0xFFFF);
|
|
else
|
|
p->port_xmit_discards =
|
|
cpu_to_be16((u16)cntrs.port_xmit_discards);
|
|
if (cntrs.local_link_integrity_errors > 0xFUL)
|
|
cntrs.local_link_integrity_errors = 0xFUL;
|
|
if (cntrs.excessive_buffer_overrun_errors > 0xFUL)
|
|
cntrs.excessive_buffer_overrun_errors = 0xFUL;
|
|
p->lli_ebor_errors = (cntrs.local_link_integrity_errors << 4) |
|
|
cntrs.excessive_buffer_overrun_errors;
|
|
if (cntrs.vl15_dropped > 0xFFFFUL)
|
|
p->vl15_dropped = __constant_cpu_to_be16(0xFFFF);
|
|
else
|
|
p->vl15_dropped = cpu_to_be16((u16)cntrs.vl15_dropped);
|
|
if (cntrs.port_xmit_data > 0xFFFFFFFFUL)
|
|
p->port_xmit_data = __constant_cpu_to_be32(0xFFFFFFFF);
|
|
else
|
|
p->port_xmit_data = cpu_to_be32((u32)cntrs.port_xmit_data);
|
|
if (cntrs.port_rcv_data > 0xFFFFFFFFUL)
|
|
p->port_rcv_data = __constant_cpu_to_be32(0xFFFFFFFF);
|
|
else
|
|
p->port_rcv_data = cpu_to_be32((u32)cntrs.port_rcv_data);
|
|
if (cntrs.port_xmit_packets > 0xFFFFFFFFUL)
|
|
p->port_xmit_packets = __constant_cpu_to_be32(0xFFFFFFFF);
|
|
else
|
|
p->port_xmit_packets =
|
|
cpu_to_be32((u32)cntrs.port_xmit_packets);
|
|
if (cntrs.port_rcv_packets > 0xFFFFFFFFUL)
|
|
p->port_rcv_packets = __constant_cpu_to_be32(0xFFFFFFFF);
|
|
else
|
|
p->port_rcv_packets =
|
|
cpu_to_be32((u32) cntrs.port_rcv_packets);
|
|
|
|
return reply((struct ib_smp *) pmp);
|
|
}
|
|
|
|
static int recv_pma_get_portcounters_ext(struct ib_perf *pmp,
|
|
struct ib_device *ibdev, u8 port)
|
|
{
|
|
struct ib_pma_portcounters_ext *p =
|
|
(struct ib_pma_portcounters_ext *)pmp->data;
|
|
struct ipath_ibdev *dev = to_idev(ibdev);
|
|
u64 swords, rwords, spkts, rpkts, xwait;
|
|
u8 port_select = p->port_select;
|
|
|
|
ipath_snapshot_counters(dev->dd, &swords, &rwords, &spkts,
|
|
&rpkts, &xwait);
|
|
|
|
/* Adjust counters for any resets done. */
|
|
swords -= dev->z_port_xmit_data;
|
|
rwords -= dev->z_port_rcv_data;
|
|
spkts -= dev->z_port_xmit_packets;
|
|
rpkts -= dev->z_port_rcv_packets;
|
|
|
|
memset(pmp->data, 0, sizeof(pmp->data));
|
|
|
|
p->port_select = port_select;
|
|
if (pmp->attr_mod != 0 ||
|
|
(port_select != port && port_select != 0xFF))
|
|
pmp->status |= IB_SMP_INVALID_FIELD;
|
|
|
|
p->port_xmit_data = cpu_to_be64(swords);
|
|
p->port_rcv_data = cpu_to_be64(rwords);
|
|
p->port_xmit_packets = cpu_to_be64(spkts);
|
|
p->port_rcv_packets = cpu_to_be64(rpkts);
|
|
p->port_unicast_xmit_packets = cpu_to_be64(dev->n_unicast_xmit);
|
|
p->port_unicast_rcv_packets = cpu_to_be64(dev->n_unicast_rcv);
|
|
p->port_multicast_xmit_packets = cpu_to_be64(dev->n_multicast_xmit);
|
|
p->port_multicast_rcv_packets = cpu_to_be64(dev->n_multicast_rcv);
|
|
|
|
return reply((struct ib_smp *) pmp);
|
|
}
|
|
|
|
static int recv_pma_set_portcounters(struct ib_perf *pmp,
|
|
struct ib_device *ibdev, u8 port)
|
|
{
|
|
struct ib_pma_portcounters *p = (struct ib_pma_portcounters *)
|
|
pmp->data;
|
|
struct ipath_ibdev *dev = to_idev(ibdev);
|
|
struct ipath_verbs_counters cntrs;
|
|
|
|
/*
|
|
* Since the HW doesn't support clearing counters, we save the
|
|
* current count and subtract it from future responses.
|
|
*/
|
|
ipath_get_counters(dev->dd, &cntrs);
|
|
|
|
if (p->counter_select & IB_PMA_SEL_SYMBOL_ERROR)
|
|
dev->z_symbol_error_counter = cntrs.symbol_error_counter;
|
|
|
|
if (p->counter_select & IB_PMA_SEL_LINK_ERROR_RECOVERY)
|
|
dev->z_link_error_recovery_counter =
|
|
cntrs.link_error_recovery_counter;
|
|
|
|
if (p->counter_select & IB_PMA_SEL_LINK_DOWNED)
|
|
dev->z_link_downed_counter = cntrs.link_downed_counter;
|
|
|
|
if (p->counter_select & IB_PMA_SEL_PORT_RCV_ERRORS)
|
|
dev->z_port_rcv_errors =
|
|
cntrs.port_rcv_errors + dev->rcv_errors;
|
|
|
|
if (p->counter_select & IB_PMA_SEL_PORT_RCV_REMPHYS_ERRORS)
|
|
dev->z_port_rcv_remphys_errors =
|
|
cntrs.port_rcv_remphys_errors;
|
|
|
|
if (p->counter_select & IB_PMA_SEL_PORT_XMIT_DISCARDS)
|
|
dev->z_port_xmit_discards = cntrs.port_xmit_discards;
|
|
|
|
if (p->counter_select & IB_PMA_SEL_LOCAL_LINK_INTEGRITY_ERRORS)
|
|
dev->z_local_link_integrity_errors =
|
|
cntrs.local_link_integrity_errors;
|
|
|
|
if (p->counter_select & IB_PMA_SEL_EXCESSIVE_BUFFER_OVERRUNS)
|
|
dev->z_excessive_buffer_overrun_errors =
|
|
cntrs.excessive_buffer_overrun_errors;
|
|
|
|
if (p->counter_select & IB_PMA_SEL_PORT_VL15_DROPPED) {
|
|
dev->n_vl15_dropped = 0;
|
|
dev->z_vl15_dropped = cntrs.vl15_dropped;
|
|
}
|
|
|
|
if (p->counter_select & IB_PMA_SEL_PORT_XMIT_DATA)
|
|
dev->z_port_xmit_data = cntrs.port_xmit_data;
|
|
|
|
if (p->counter_select & IB_PMA_SEL_PORT_RCV_DATA)
|
|
dev->z_port_rcv_data = cntrs.port_rcv_data;
|
|
|
|
if (p->counter_select & IB_PMA_SEL_PORT_XMIT_PACKETS)
|
|
dev->z_port_xmit_packets = cntrs.port_xmit_packets;
|
|
|
|
if (p->counter_select & IB_PMA_SEL_PORT_RCV_PACKETS)
|
|
dev->z_port_rcv_packets = cntrs.port_rcv_packets;
|
|
|
|
return recv_pma_get_portcounters(pmp, ibdev, port);
|
|
}
|
|
|
|
static int recv_pma_set_portcounters_ext(struct ib_perf *pmp,
|
|
struct ib_device *ibdev, u8 port)
|
|
{
|
|
struct ib_pma_portcounters *p = (struct ib_pma_portcounters *)
|
|
pmp->data;
|
|
struct ipath_ibdev *dev = to_idev(ibdev);
|
|
u64 swords, rwords, spkts, rpkts, xwait;
|
|
|
|
ipath_snapshot_counters(dev->dd, &swords, &rwords, &spkts,
|
|
&rpkts, &xwait);
|
|
|
|
if (p->counter_select & IB_PMA_SELX_PORT_XMIT_DATA)
|
|
dev->z_port_xmit_data = swords;
|
|
|
|
if (p->counter_select & IB_PMA_SELX_PORT_RCV_DATA)
|
|
dev->z_port_rcv_data = rwords;
|
|
|
|
if (p->counter_select & IB_PMA_SELX_PORT_XMIT_PACKETS)
|
|
dev->z_port_xmit_packets = spkts;
|
|
|
|
if (p->counter_select & IB_PMA_SELX_PORT_RCV_PACKETS)
|
|
dev->z_port_rcv_packets = rpkts;
|
|
|
|
if (p->counter_select & IB_PMA_SELX_PORT_UNI_XMIT_PACKETS)
|
|
dev->n_unicast_xmit = 0;
|
|
|
|
if (p->counter_select & IB_PMA_SELX_PORT_UNI_RCV_PACKETS)
|
|
dev->n_unicast_rcv = 0;
|
|
|
|
if (p->counter_select & IB_PMA_SELX_PORT_MULTI_XMIT_PACKETS)
|
|
dev->n_multicast_xmit = 0;
|
|
|
|
if (p->counter_select & IB_PMA_SELX_PORT_MULTI_RCV_PACKETS)
|
|
dev->n_multicast_rcv = 0;
|
|
|
|
return recv_pma_get_portcounters_ext(pmp, ibdev, port);
|
|
}
|
|
|
|
static int process_subn(struct ib_device *ibdev, int mad_flags,
|
|
u8 port_num, struct ib_mad *in_mad,
|
|
struct ib_mad *out_mad)
|
|
{
|
|
struct ib_smp *smp = (struct ib_smp *)out_mad;
|
|
struct ipath_ibdev *dev = to_idev(ibdev);
|
|
int ret;
|
|
|
|
*out_mad = *in_mad;
|
|
if (smp->class_version != 1) {
|
|
smp->status |= IB_SMP_UNSUP_VERSION;
|
|
ret = reply(smp);
|
|
goto bail;
|
|
}
|
|
|
|
/* Is the mkey in the process of expiring? */
|
|
if (dev->mkey_lease_timeout && jiffies >= dev->mkey_lease_timeout) {
|
|
/* Clear timeout and mkey protection field. */
|
|
dev->mkey_lease_timeout = 0;
|
|
dev->mkeyprot = 0;
|
|
}
|
|
|
|
/*
|
|
* M_Key checking depends on
|
|
* Portinfo:M_Key_protect_bits
|
|
*/
|
|
if ((mad_flags & IB_MAD_IGNORE_MKEY) == 0 && dev->mkey != 0 &&
|
|
dev->mkey != smp->mkey &&
|
|
(smp->method == IB_MGMT_METHOD_SET ||
|
|
(smp->method == IB_MGMT_METHOD_GET &&
|
|
dev->mkeyprot >= 2))) {
|
|
if (dev->mkey_violations != 0xFFFF)
|
|
++dev->mkey_violations;
|
|
if (dev->mkey_lease_timeout ||
|
|
dev->mkey_lease_period == 0) {
|
|
ret = IB_MAD_RESULT_SUCCESS |
|
|
IB_MAD_RESULT_CONSUMED;
|
|
goto bail;
|
|
}
|
|
dev->mkey_lease_timeout = jiffies +
|
|
dev->mkey_lease_period * HZ;
|
|
/* Future: Generate a trap notice. */
|
|
ret = IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED;
|
|
goto bail;
|
|
} else if (dev->mkey_lease_timeout)
|
|
dev->mkey_lease_timeout = 0;
|
|
|
|
switch (smp->method) {
|
|
case IB_MGMT_METHOD_GET:
|
|
switch (smp->attr_id) {
|
|
case IB_SMP_ATTR_NODE_DESC:
|
|
ret = recv_subn_get_nodedescription(smp, ibdev);
|
|
goto bail;
|
|
case IB_SMP_ATTR_NODE_INFO:
|
|
ret = recv_subn_get_nodeinfo(smp, ibdev, port_num);
|
|
goto bail;
|
|
case IB_SMP_ATTR_GUID_INFO:
|
|
ret = recv_subn_get_guidinfo(smp, ibdev);
|
|
goto bail;
|
|
case IB_SMP_ATTR_PORT_INFO:
|
|
ret = recv_subn_get_portinfo(smp, ibdev, port_num);
|
|
goto bail;
|
|
case IB_SMP_ATTR_PKEY_TABLE:
|
|
ret = recv_subn_get_pkeytable(smp, ibdev);
|
|
goto bail;
|
|
case IB_SMP_ATTR_SM_INFO:
|
|
if (dev->port_cap_flags & IB_PORT_SM_DISABLED) {
|
|
ret = IB_MAD_RESULT_SUCCESS |
|
|
IB_MAD_RESULT_CONSUMED;
|
|
goto bail;
|
|
}
|
|
if (dev->port_cap_flags & IB_PORT_SM) {
|
|
ret = IB_MAD_RESULT_SUCCESS;
|
|
goto bail;
|
|
}
|
|
/* FALLTHROUGH */
|
|
default:
|
|
smp->status |= IB_SMP_UNSUP_METH_ATTR;
|
|
ret = reply(smp);
|
|
goto bail;
|
|
}
|
|
|
|
case IB_MGMT_METHOD_SET:
|
|
switch (smp->attr_id) {
|
|
case IB_SMP_ATTR_GUID_INFO:
|
|
ret = recv_subn_set_guidinfo(smp, ibdev);
|
|
goto bail;
|
|
case IB_SMP_ATTR_PORT_INFO:
|
|
ret = recv_subn_set_portinfo(smp, ibdev, port_num);
|
|
goto bail;
|
|
case IB_SMP_ATTR_PKEY_TABLE:
|
|
ret = recv_subn_set_pkeytable(smp, ibdev);
|
|
goto bail;
|
|
case IB_SMP_ATTR_SM_INFO:
|
|
if (dev->port_cap_flags & IB_PORT_SM_DISABLED) {
|
|
ret = IB_MAD_RESULT_SUCCESS |
|
|
IB_MAD_RESULT_CONSUMED;
|
|
goto bail;
|
|
}
|
|
if (dev->port_cap_flags & IB_PORT_SM) {
|
|
ret = IB_MAD_RESULT_SUCCESS;
|
|
goto bail;
|
|
}
|
|
/* FALLTHROUGH */
|
|
default:
|
|
smp->status |= IB_SMP_UNSUP_METH_ATTR;
|
|
ret = reply(smp);
|
|
goto bail;
|
|
}
|
|
|
|
case IB_MGMT_METHOD_GET_RESP:
|
|
/*
|
|
* The ib_mad module will call us to process responses
|
|
* before checking for other consumers.
|
|
* Just tell the caller to process it normally.
|
|
*/
|
|
ret = IB_MAD_RESULT_SUCCESS;
|
|
goto bail;
|
|
default:
|
|
smp->status |= IB_SMP_UNSUP_METHOD;
|
|
ret = reply(smp);
|
|
}
|
|
|
|
bail:
|
|
return ret;
|
|
}
|
|
|
|
static int process_perf(struct ib_device *ibdev, u8 port_num,
|
|
struct ib_mad *in_mad,
|
|
struct ib_mad *out_mad)
|
|
{
|
|
struct ib_perf *pmp = (struct ib_perf *)out_mad;
|
|
int ret;
|
|
|
|
*out_mad = *in_mad;
|
|
if (pmp->class_version != 1) {
|
|
pmp->status |= IB_SMP_UNSUP_VERSION;
|
|
ret = reply((struct ib_smp *) pmp);
|
|
goto bail;
|
|
}
|
|
|
|
switch (pmp->method) {
|
|
case IB_MGMT_METHOD_GET:
|
|
switch (pmp->attr_id) {
|
|
case IB_PMA_CLASS_PORT_INFO:
|
|
ret = recv_pma_get_classportinfo(pmp);
|
|
goto bail;
|
|
case IB_PMA_PORT_SAMPLES_CONTROL:
|
|
ret = recv_pma_get_portsamplescontrol(pmp, ibdev,
|
|
port_num);
|
|
goto bail;
|
|
case IB_PMA_PORT_SAMPLES_RESULT:
|
|
ret = recv_pma_get_portsamplesresult(pmp, ibdev);
|
|
goto bail;
|
|
case IB_PMA_PORT_SAMPLES_RESULT_EXT:
|
|
ret = recv_pma_get_portsamplesresult_ext(pmp,
|
|
ibdev);
|
|
goto bail;
|
|
case IB_PMA_PORT_COUNTERS:
|
|
ret = recv_pma_get_portcounters(pmp, ibdev,
|
|
port_num);
|
|
goto bail;
|
|
case IB_PMA_PORT_COUNTERS_EXT:
|
|
ret = recv_pma_get_portcounters_ext(pmp, ibdev,
|
|
port_num);
|
|
goto bail;
|
|
default:
|
|
pmp->status |= IB_SMP_UNSUP_METH_ATTR;
|
|
ret = reply((struct ib_smp *) pmp);
|
|
goto bail;
|
|
}
|
|
|
|
case IB_MGMT_METHOD_SET:
|
|
switch (pmp->attr_id) {
|
|
case IB_PMA_PORT_SAMPLES_CONTROL:
|
|
ret = recv_pma_set_portsamplescontrol(pmp, ibdev,
|
|
port_num);
|
|
goto bail;
|
|
case IB_PMA_PORT_COUNTERS:
|
|
ret = recv_pma_set_portcounters(pmp, ibdev,
|
|
port_num);
|
|
goto bail;
|
|
case IB_PMA_PORT_COUNTERS_EXT:
|
|
ret = recv_pma_set_portcounters_ext(pmp, ibdev,
|
|
port_num);
|
|
goto bail;
|
|
default:
|
|
pmp->status |= IB_SMP_UNSUP_METH_ATTR;
|
|
ret = reply((struct ib_smp *) pmp);
|
|
goto bail;
|
|
}
|
|
|
|
case IB_MGMT_METHOD_GET_RESP:
|
|
/*
|
|
* The ib_mad module will call us to process responses
|
|
* before checking for other consumers.
|
|
* Just tell the caller to process it normally.
|
|
*/
|
|
ret = IB_MAD_RESULT_SUCCESS;
|
|
goto bail;
|
|
default:
|
|
pmp->status |= IB_SMP_UNSUP_METHOD;
|
|
ret = reply((struct ib_smp *) pmp);
|
|
}
|
|
|
|
bail:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ipath_process_mad - process an incoming MAD packet
|
|
* @ibdev: the infiniband device this packet came in on
|
|
* @mad_flags: MAD flags
|
|
* @port_num: the port number this packet came in on
|
|
* @in_wc: the work completion entry for this packet
|
|
* @in_grh: the global route header for this packet
|
|
* @in_mad: the incoming MAD
|
|
* @out_mad: any outgoing MAD reply
|
|
*
|
|
* Returns IB_MAD_RESULT_SUCCESS if this is a MAD that we are not
|
|
* interested in processing.
|
|
*
|
|
* Note that the verbs framework has already done the MAD sanity checks,
|
|
* and hop count/pointer updating for IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE
|
|
* MADs.
|
|
*
|
|
* This is called by the ib_mad module.
|
|
*/
|
|
int ipath_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
|
|
struct ib_wc *in_wc, struct ib_grh *in_grh,
|
|
struct ib_mad *in_mad, struct ib_mad *out_mad)
|
|
{
|
|
int ret;
|
|
|
|
switch (in_mad->mad_hdr.mgmt_class) {
|
|
case IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE:
|
|
case IB_MGMT_CLASS_SUBN_LID_ROUTED:
|
|
ret = process_subn(ibdev, mad_flags, port_num,
|
|
in_mad, out_mad);
|
|
goto bail;
|
|
case IB_MGMT_CLASS_PERF_MGMT:
|
|
ret = process_perf(ibdev, port_num, in_mad, out_mad);
|
|
goto bail;
|
|
default:
|
|
ret = IB_MAD_RESULT_SUCCESS;
|
|
}
|
|
|
|
bail:
|
|
return ret;
|
|
}
|