kernel-fxtec-pro1x/drivers/net/hplance.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

242 lines
7.1 KiB
C

/* hplance.c : the Linux/hp300/lance ethernet driver
*
* Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
* Based on the Sun Lance driver and the NetBSD HP Lance driver
* Uses the generic 7990.c LANCE code.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/errno.h>
/* Used for the temporal inet entries and routing */
#include <linux/socket.h>
#include <linux/route.h>
#include <linux/dio.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include "hplance.h"
/* We have 16834 bytes of RAM for the init block and buffers. This places
* an upper limit on the number of buffers we can use. NetBSD uses 8 Rx
* buffers and 2 Tx buffers.
*/
#define LANCE_LOG_TX_BUFFERS 1
#define LANCE_LOG_RX_BUFFERS 3
#include "7990.h" /* use generic LANCE code */
/* Our private data structure */
struct hplance_private {
struct lance_private lance;
};
/* function prototypes... This is easy because all the grot is in the
* generic LANCE support. All we have to support is probing for boards,
* plus board-specific init, open and close actions.
* Oh, and we need to tell the generic code how to read and write LANCE registers...
*/
static int __devinit hplance_init_one(struct dio_dev *d,
const struct dio_device_id *ent);
static void __devinit hplance_init(struct net_device *dev,
struct dio_dev *d);
static void __devexit hplance_remove_one(struct dio_dev *d);
static void hplance_writerap(void *priv, unsigned short value);
static void hplance_writerdp(void *priv, unsigned short value);
static unsigned short hplance_readrdp(void *priv);
static int hplance_open(struct net_device *dev);
static int hplance_close(struct net_device *dev);
static struct dio_device_id hplance_dio_tbl[] = {
{ DIO_ID_LAN },
{ 0 }
};
static struct dio_driver hplance_driver = {
.name = "hplance",
.id_table = hplance_dio_tbl,
.probe = hplance_init_one,
.remove = __devexit_p(hplance_remove_one),
};
static const struct net_device_ops hplance_netdev_ops = {
.ndo_open = hplance_open,
.ndo_stop = hplance_close,
.ndo_start_xmit = lance_start_xmit,
.ndo_set_multicast_list = lance_set_multicast,
.ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = lance_poll,
#endif
};
/* Find all the HP Lance boards and initialise them... */
static int __devinit hplance_init_one(struct dio_dev *d,
const struct dio_device_id *ent)
{
struct net_device *dev;
int err = -ENOMEM;
int i;
dev = alloc_etherdev(sizeof(struct hplance_private));
if (!dev)
goto out;
err = -EBUSY;
if (!request_mem_region(dio_resource_start(d),
dio_resource_len(d), d->name))
goto out_free_netdev;
hplance_init(dev, d);
err = register_netdev(dev);
if (err)
goto out_release_mem_region;
dio_set_drvdata(d, dev);
printk(KERN_INFO "%s: %s; select code %d, addr %2.2x", dev->name, d->name, d->scode, dev->dev_addr[0]);
for (i=1; i<6; i++) {
printk(":%2.2x", dev->dev_addr[i]);
}
printk(", irq %d\n", d->ipl);
return 0;
out_release_mem_region:
release_mem_region(dio_resource_start(d), dio_resource_len(d));
out_free_netdev:
free_netdev(dev);
out:
return err;
}
static void __devexit hplance_remove_one(struct dio_dev *d)
{
struct net_device *dev = dio_get_drvdata(d);
unregister_netdev(dev);
release_mem_region(dio_resource_start(d), dio_resource_len(d));
free_netdev(dev);
}
/* Initialise a single lance board at the given DIO device */
static void __init hplance_init(struct net_device *dev, struct dio_dev *d)
{
unsigned long va = (d->resource.start + DIO_VIRADDRBASE);
struct hplance_private *lp;
int i;
/* reset the board */
out_8(va+DIO_IDOFF, 0xff);
udelay(100); /* ariba! ariba! udelay! udelay! */
/* Fill the dev fields */
dev->base_addr = va;
dev->netdev_ops = &hplance_netdev_ops;
dev->dma = 0;
for (i=0; i<6; i++) {
/* The NVRAM holds our ethernet address, one nibble per byte,
* at bytes NVRAMOFF+1,3,5,7,9...
*/
dev->dev_addr[i] = ((in_8(va + HPLANCE_NVRAMOFF + i*4 + 1) & 0xF) << 4)
| (in_8(va + HPLANCE_NVRAMOFF + i*4 + 3) & 0xF);
}
lp = netdev_priv(dev);
lp->lance.name = (char*)d->name; /* discards const, shut up gcc */
lp->lance.base = va;
lp->lance.init_block = (struct lance_init_block *)(va + HPLANCE_MEMOFF); /* CPU addr */
lp->lance.lance_init_block = NULL; /* LANCE addr of same RAM */
lp->lance.busmaster_regval = LE_C3_BSWP; /* we're bigendian */
lp->lance.irq = d->ipl;
lp->lance.writerap = hplance_writerap;
lp->lance.writerdp = hplance_writerdp;
lp->lance.readrdp = hplance_readrdp;
lp->lance.lance_log_rx_bufs = LANCE_LOG_RX_BUFFERS;
lp->lance.lance_log_tx_bufs = LANCE_LOG_TX_BUFFERS;
lp->lance.rx_ring_mod_mask = RX_RING_MOD_MASK;
lp->lance.tx_ring_mod_mask = TX_RING_MOD_MASK;
}
/* This is disgusting. We have to check the DIO status register for ack every
* time we read or write the LANCE registers.
*/
static void hplance_writerap(void *priv, unsigned short value)
{
struct lance_private *lp = (struct lance_private *)priv;
do {
out_be16(lp->base + HPLANCE_REGOFF + LANCE_RAP, value);
} while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
}
static void hplance_writerdp(void *priv, unsigned short value)
{
struct lance_private *lp = (struct lance_private *)priv;
do {
out_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP, value);
} while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
}
static unsigned short hplance_readrdp(void *priv)
{
struct lance_private *lp = (struct lance_private *)priv;
__u16 value;
do {
value = in_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP);
} while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
return value;
}
static int hplance_open(struct net_device *dev)
{
int status;
struct lance_private *lp = netdev_priv(dev);
status = lance_open(dev); /* call generic lance open code */
if (status)
return status;
/* enable interrupts at board level. */
out_8(lp->base + HPLANCE_STATUS, LE_IE);
return 0;
}
static int hplance_close(struct net_device *dev)
{
struct lance_private *lp = netdev_priv(dev);
out_8(lp->base + HPLANCE_STATUS, 0); /* disable interrupts at boardlevel */
lance_close(dev);
return 0;
}
static int __init hplance_init_module(void)
{
return dio_register_driver(&hplance_driver);
}
static void __exit hplance_cleanup_module(void)
{
dio_unregister_driver(&hplance_driver);
}
module_init(hplance_init_module);
module_exit(hplance_cleanup_module);
MODULE_LICENSE("GPL");