kernel-fxtec-pro1x/drivers/usb
Andiry Xu f99298bfa7 xHCI: BESL calculation based on USB2.0 LPM errata
The latest released errata for USB2.0 ECN LPM adds new fields to USB2.0
extension descriptor, defines two BESL values for device: baseline BESL
and deep BESL. Baseline BESL value communicates a nominal power savings
design point and the deep BESL value communicates a significant power
savings design point.

If device indicates BESL value, driver will use a value count in both
host BESL and device BESL. Use baseline BESL value as default.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Tested-by: Jason Fan <jcfan@qca.qualcomm.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-12 09:31:24 -07:00
..
atm module_param: make bool parameters really bool (drivers & misc) 2012-01-13 09:32:20 +10:30
c67x00
class usb: cdc-wdm: adding usb_cdc_wdm_register subdriver support 2012-03-08 13:06:48 -08:00
core usb/core: remove "always" from usb_unlink_urb() kernel doc entry 2012-03-02 16:22:11 -08:00
dwc3 usb: dwc3: core: Convert to module_platform_driver 2012-03-02 16:20:28 -08:00
early
gadget USB: gadget: Make g_hid device class conform to spec. 2012-03-08 13:11:34 -08:00
host xHCI: BESL calculation based on USB2.0 LPM errata 2012-03-12 09:31:24 -07:00
image
misc USB: usbsevseg: fix max length 2012-01-24 12:08:36 -08:00
mon
musb usb: core: hcd: make hcd->irq unsigned 2012-03-01 09:31:22 -08:00
otg usb: otg: ab8500-usb: make probe() work again 2012-03-02 16:22:11 -08:00
renesas_usbhs This merge is rather big. Here's what it contains: 2012-03-01 09:20:28 -08:00
serial USB: ftdi_sio: new PID: Distortec JTAG-lock-pick 2012-03-09 12:39:52 -08:00
storage usb/storage: redefine US_BULK_FLAG_IN and use it 2012-02-28 11:07:42 -08:00
wusbcore uwb & wusb: fix kconfig error 2012-01-26 11:22:42 -08:00
Kconfig USB: Add EHCI bus glue for Loongson1x SoCs (UPDATED) 2012-01-24 15:28:02 -08:00
Makefile
README
usb-common.c
usb-skeleton.c Revert "USB: usb-skeleton.c: fix open/disconnect race" 2012-01-24 12:02:38 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.