kernel-fxtec-pro1x/drivers/usb/musb/musbhsdma.c
Felipe Balbi 5c8a86e10a usb: musb: drop unneeded musb_debug trickery
We have a generic way of enabling/disabling
different debug messages on a driver called
DYNAMIC_PRINTK. Anyone interested in enabling
just part of the debug messages, please read
the documentation under:

Documentation/dynamic-debug-howto.txt

for information on how to use that great
infrastructure.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13 14:34:04 +03:00

422 lines
12 KiB
C

/*
* MUSB OTG driver - support for Mentor's DMA controller
*
* Copyright 2005 Mentor Graphics Corporation
* Copyright (C) 2005-2007 by Texas Instruments
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "musb_core.h"
#include "musbhsdma.h"
static int dma_controller_start(struct dma_controller *c)
{
/* nothing to do */
return 0;
}
static void dma_channel_release(struct dma_channel *channel);
static int dma_controller_stop(struct dma_controller *c)
{
struct musb_dma_controller *controller = container_of(c,
struct musb_dma_controller, controller);
struct musb *musb = controller->private_data;
struct dma_channel *channel;
u8 bit;
if (controller->used_channels != 0) {
dev_err(musb->controller,
"Stopping DMA controller while channel active\n");
for (bit = 0; bit < MUSB_HSDMA_CHANNELS; bit++) {
if (controller->used_channels & (1 << bit)) {
channel = &controller->channel[bit].channel;
dma_channel_release(channel);
if (!controller->used_channels)
break;
}
}
}
return 0;
}
static struct dma_channel *dma_channel_allocate(struct dma_controller *c,
struct musb_hw_ep *hw_ep, u8 transmit)
{
struct musb_dma_controller *controller = container_of(c,
struct musb_dma_controller, controller);
struct musb_dma_channel *musb_channel = NULL;
struct dma_channel *channel = NULL;
u8 bit;
for (bit = 0; bit < MUSB_HSDMA_CHANNELS; bit++) {
if (!(controller->used_channels & (1 << bit))) {
controller->used_channels |= (1 << bit);
musb_channel = &(controller->channel[bit]);
musb_channel->controller = controller;
musb_channel->idx = bit;
musb_channel->epnum = hw_ep->epnum;
musb_channel->transmit = transmit;
channel = &(musb_channel->channel);
channel->private_data = musb_channel;
channel->status = MUSB_DMA_STATUS_FREE;
channel->max_len = 0x100000;
/* Tx => mode 1; Rx => mode 0 */
channel->desired_mode = transmit;
channel->actual_len = 0;
break;
}
}
return channel;
}
static void dma_channel_release(struct dma_channel *channel)
{
struct musb_dma_channel *musb_channel = channel->private_data;
channel->actual_len = 0;
musb_channel->start_addr = 0;
musb_channel->len = 0;
musb_channel->controller->used_channels &=
~(1 << musb_channel->idx);
channel->status = MUSB_DMA_STATUS_UNKNOWN;
}
static void configure_channel(struct dma_channel *channel,
u16 packet_sz, u8 mode,
dma_addr_t dma_addr, u32 len)
{
struct musb_dma_channel *musb_channel = channel->private_data;
struct musb_dma_controller *controller = musb_channel->controller;
struct musb *musb = controller->private_data;
void __iomem *mbase = controller->base;
u8 bchannel = musb_channel->idx;
u16 csr = 0;
dev_dbg(musb->controller, "%p, pkt_sz %d, addr 0x%x, len %d, mode %d\n",
channel, packet_sz, dma_addr, len, mode);
if (mode) {
csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
BUG_ON(len < packet_sz);
}
csr |= MUSB_HSDMA_BURSTMODE_INCR16
<< MUSB_HSDMA_BURSTMODE_SHIFT;
csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
| (1 << MUSB_HSDMA_ENABLE_SHIFT)
| (1 << MUSB_HSDMA_IRQENABLE_SHIFT)
| (musb_channel->transmit
? (1 << MUSB_HSDMA_TRANSMIT_SHIFT)
: 0);
/* address/count */
musb_write_hsdma_addr(mbase, bchannel, dma_addr);
musb_write_hsdma_count(mbase, bchannel, len);
/* control (this should start things) */
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL),
csr);
}
static int dma_channel_program(struct dma_channel *channel,
u16 packet_sz, u8 mode,
dma_addr_t dma_addr, u32 len)
{
struct musb_dma_channel *musb_channel = channel->private_data;
struct musb_dma_controller *controller = musb_channel->controller;
struct musb *musb = controller->private_data;
dev_dbg(musb->controller, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n",
musb_channel->epnum,
musb_channel->transmit ? "Tx" : "Rx",
packet_sz, dma_addr, len, mode);
BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
channel->status == MUSB_DMA_STATUS_BUSY);
/* Let targets check/tweak the arguments */
if (musb->ops->adjust_channel_params) {
int ret = musb->ops->adjust_channel_params(channel,
packet_sz, &mode, &dma_addr, &len);
if (ret)
return ret;
}
/*
* The DMA engine in RTL1.8 and above cannot handle
* DMA addresses that are not aligned to a 4 byte boundary.
* It ends up masking the last two bits of the address
* programmed in DMA_ADDR.
*
* Fail such DMA transfers, so that the backup PIO mode
* can carry out the transfer
*/
if ((musb->hwvers >= MUSB_HWVERS_1800) && (dma_addr % 4))
return false;
channel->actual_len = 0;
musb_channel->start_addr = dma_addr;
musb_channel->len = len;
musb_channel->max_packet_sz = packet_sz;
channel->status = MUSB_DMA_STATUS_BUSY;
configure_channel(channel, packet_sz, mode, dma_addr, len);
return true;
}
static int dma_channel_abort(struct dma_channel *channel)
{
struct musb_dma_channel *musb_channel = channel->private_data;
void __iomem *mbase = musb_channel->controller->base;
u8 bchannel = musb_channel->idx;
int offset;
u16 csr;
if (channel->status == MUSB_DMA_STATUS_BUSY) {
if (musb_channel->transmit) {
offset = MUSB_EP_OFFSET(musb_channel->epnum,
MUSB_TXCSR);
/*
* The programming guide says that we must clear
* the DMAENAB bit before the DMAMODE bit...
*/
csr = musb_readw(mbase, offset);
csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
musb_writew(mbase, offset, csr);
csr &= ~MUSB_TXCSR_DMAMODE;
musb_writew(mbase, offset, csr);
} else {
offset = MUSB_EP_OFFSET(musb_channel->epnum,
MUSB_RXCSR);
csr = musb_readw(mbase, offset);
csr &= ~(MUSB_RXCSR_AUTOCLEAR |
MUSB_RXCSR_DMAENAB |
MUSB_RXCSR_DMAMODE);
musb_writew(mbase, offset, csr);
}
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL),
0);
musb_write_hsdma_addr(mbase, bchannel, 0);
musb_write_hsdma_count(mbase, bchannel, 0);
channel->status = MUSB_DMA_STATUS_FREE;
}
return 0;
}
static irqreturn_t dma_controller_irq(int irq, void *private_data)
{
struct musb_dma_controller *controller = private_data;
struct musb *musb = controller->private_data;
struct musb_dma_channel *musb_channel;
struct dma_channel *channel;
void __iomem *mbase = controller->base;
irqreturn_t retval = IRQ_NONE;
unsigned long flags;
u8 bchannel;
u8 int_hsdma;
u32 addr, count;
u16 csr;
spin_lock_irqsave(&musb->lock, flags);
int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
#ifdef CONFIG_BLACKFIN
/* Clear DMA interrupt flags */
musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma);
#endif
if (!int_hsdma) {
dev_dbg(musb->controller, "spurious DMA irq\n");
for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) {
musb_channel = (struct musb_dma_channel *)
&(controller->channel[bchannel]);
channel = &musb_channel->channel;
if (channel->status == MUSB_DMA_STATUS_BUSY) {
count = musb_read_hsdma_count(mbase, bchannel);
if (count == 0)
int_hsdma |= (1 << bchannel);
}
}
dev_dbg(musb->controller, "int_hsdma = 0x%x\n", int_hsdma);
if (!int_hsdma)
goto done;
}
for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) {
if (int_hsdma & (1 << bchannel)) {
musb_channel = (struct musb_dma_channel *)
&(controller->channel[bchannel]);
channel = &musb_channel->channel;
csr = musb_readw(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel,
MUSB_HSDMA_CONTROL));
if (csr & (1 << MUSB_HSDMA_BUSERROR_SHIFT)) {
musb_channel->channel.status =
MUSB_DMA_STATUS_BUS_ABORT;
} else {
u8 devctl;
addr = musb_read_hsdma_addr(mbase,
bchannel);
channel->actual_len = addr
- musb_channel->start_addr;
dev_dbg(musb->controller, "ch %p, 0x%x -> 0x%x (%zu / %d) %s\n",
channel, musb_channel->start_addr,
addr, channel->actual_len,
musb_channel->len,
(channel->actual_len
< musb_channel->len) ?
"=> reconfig 0" : "=> complete");
devctl = musb_readb(mbase, MUSB_DEVCTL);
channel->status = MUSB_DMA_STATUS_FREE;
/* completed */
if ((devctl & MUSB_DEVCTL_HM)
&& (musb_channel->transmit)
&& ((channel->desired_mode == 0)
|| (channel->actual_len &
(musb_channel->max_packet_sz - 1)))
) {
u8 epnum = musb_channel->epnum;
int offset = MUSB_EP_OFFSET(epnum,
MUSB_TXCSR);
u16 txcsr;
/*
* The programming guide says that we
* must clear DMAENAB before DMAMODE.
*/
musb_ep_select(mbase, epnum);
txcsr = musb_readw(mbase, offset);
txcsr &= ~(MUSB_TXCSR_DMAENAB
| MUSB_TXCSR_AUTOSET);
musb_writew(mbase, offset, txcsr);
/* Send out the packet */
txcsr &= ~MUSB_TXCSR_DMAMODE;
txcsr |= MUSB_TXCSR_TXPKTRDY;
musb_writew(mbase, offset, txcsr);
}
musb_dma_completion(musb, musb_channel->epnum,
musb_channel->transmit);
}
}
}
retval = IRQ_HANDLED;
done:
spin_unlock_irqrestore(&musb->lock, flags);
return retval;
}
void dma_controller_destroy(struct dma_controller *c)
{
struct musb_dma_controller *controller = container_of(c,
struct musb_dma_controller, controller);
if (!controller)
return;
if (controller->irq)
free_irq(controller->irq, c);
kfree(controller);
}
struct dma_controller *__init
dma_controller_create(struct musb *musb, void __iomem *base)
{
struct musb_dma_controller *controller;
struct device *dev = musb->controller;
struct platform_device *pdev = to_platform_device(dev);
int irq = platform_get_irq_byname(pdev, "dma");
if (irq == 0) {
dev_err(dev, "No DMA interrupt line!\n");
return NULL;
}
controller = kzalloc(sizeof(*controller), GFP_KERNEL);
if (!controller)
return NULL;
controller->channel_count = MUSB_HSDMA_CHANNELS;
controller->private_data = musb;
controller->base = base;
controller->controller.start = dma_controller_start;
controller->controller.stop = dma_controller_stop;
controller->controller.channel_alloc = dma_channel_allocate;
controller->controller.channel_release = dma_channel_release;
controller->controller.channel_program = dma_channel_program;
controller->controller.channel_abort = dma_channel_abort;
if (request_irq(irq, dma_controller_irq, IRQF_DISABLED,
dev_name(musb->controller), &controller->controller)) {
dev_err(dev, "request_irq %d failed!\n", irq);
dma_controller_destroy(&controller->controller);
return NULL;
}
controller->irq = irq;
return &controller->controller;
}