kernel-fxtec-pro1x/arch/frv/kernel/irq-mb93093.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

99 lines
2.3 KiB
C

/* irq-mb93093.c: MB93093 FPGA interrupt handling
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/bitops.h>
#include <asm/delay.h>
#include <asm/irq.h>
#include <asm/irc-regs.h>
#include <asm/irq-routing.h>
#define __reg16(ADDR) (*(volatile unsigned short *)(__region_CS2 + (ADDR)))
#define __get_IMR() ({ __reg16(0x0a); })
#define __set_IMR(M) do { __reg16(0x0a) = (M); wmb(); } while(0)
#define __get_IFR() ({ __reg16(0x02); })
#define __clr_IFR(M) do { __reg16(0x02) = ~(M); wmb(); } while(0)
static void frv_fpga_doirq(struct irq_source *source);
static void frv_fpga_control(struct irq_group *group, int irq, int on);
/*****************************************************************************/
/*
* FPGA IRQ multiplexor
*/
static struct irq_source frv_fpga[4] = {
#define __FPGA(X, M) \
[X] = { \
.muxname = "fpga."#X, \
.irqmask = M, \
.doirq = frv_fpga_doirq, \
}
__FPGA(0, 0x0700),
};
static struct irq_group frv_fpga_irqs = {
.first_irq = IRQ_BASE_FPGA,
.control = frv_fpga_control,
.sources = {
[ 8] = &frv_fpga[0],
[ 9] = &frv_fpga[0],
[10] = &frv_fpga[0],
},
};
static void frv_fpga_control(struct irq_group *group, int index, int on)
{
uint16_t imr = __get_IMR();
if (on)
imr &= ~(1 << index);
else
imr |= 1 << index;
__set_IMR(imr);
}
static void frv_fpga_doirq(struct irq_source *source)
{
uint16_t mask, imr;
imr = __get_IMR();
mask = source->irqmask & ~imr & __get_IFR();
if (mask) {
__set_IMR(imr | mask);
__clr_IFR(mask);
distribute_irqs(&frv_fpga_irqs, mask);
__set_IMR(imr);
}
}
void __init fpga_init(void)
{
__set_IMR(0x0700);
__clr_IFR(0x0000);
frv_irq_route_external(&frv_fpga[0], IRQ_CPU_EXTERNAL2);
frv_irq_set_group(&frv_fpga_irqs);
}