f0c8ac8083
Removed the following cruft from .dts files: * 32-bit in cpu node -- doesn't exist in any spec and not used by kernel * removed built-in (chrp legacy) * Removed #interrupt-cells in places they don't need to be set * Fixed ranges on lite5200* * Removed clock-frequency from i8259 pic node, not sure where this came from * Removed big-endian from i8259 pic nodes, this was just bogus Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
345 lines
8.6 KiB
Text
345 lines
8.6 KiB
Text
/*
|
|
* Lite5200B board Device Tree Source
|
|
*
|
|
* Copyright 2006-2007 Secret Lab Technologies Ltd.
|
|
* Grant Likely <grant.likely@secretlab.ca>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/*
|
|
* WARNING: Do not depend on this tree layout remaining static just yet.
|
|
* The MPC5200 device tree conventions are still in flux
|
|
* Keep an eye on the linuxppc-dev mailing list for more details
|
|
*/
|
|
|
|
/ {
|
|
model = "fsl,lite5200b";
|
|
// revision = "1.0";
|
|
compatible = "fsl,lite5200b\0generic-mpc5200";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,5200@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
d-cache-line-size = <20>;
|
|
i-cache-line-size = <20>;
|
|
d-cache-size = <4000>; // L1, 16K
|
|
i-cache-size = <4000>; // L1, 16K
|
|
timebase-frequency = <0>; // from bootloader
|
|
bus-frequency = <0>; // from bootloader
|
|
clock-frequency = <0>; // from bootloader
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <00000000 10000000>; // 256MB
|
|
};
|
|
|
|
soc5200@f0000000 {
|
|
model = "fsl,mpc5200b";
|
|
compatible = "mpc5200";
|
|
revision = ""; // from bootloader
|
|
device_type = "soc";
|
|
ranges = <0 f0000000 0000c000>;
|
|
reg = <f0000000 00000100>;
|
|
bus-frequency = <0>; // from bootloader
|
|
system-frequency = <0>; // from bootloader
|
|
|
|
cdm@200 {
|
|
compatible = "mpc5200b-cdm\0mpc5200-cdm";
|
|
reg = <200 38>;
|
|
};
|
|
|
|
mpc5200_pic: pic@500 {
|
|
// 5200 interrupts are encoded into two levels;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
device_type = "interrupt-controller";
|
|
compatible = "mpc5200b-pic\0mpc5200-pic";
|
|
reg = <500 80>;
|
|
};
|
|
|
|
gpt@600 { // General Purpose Timer
|
|
compatible = "mpc5200b-gpt\0mpc5200-gpt";
|
|
device_type = "gpt";
|
|
cell-index = <0>;
|
|
reg = <600 10>;
|
|
interrupts = <1 9 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
has-wdt;
|
|
};
|
|
|
|
gpt@610 { // General Purpose Timer
|
|
compatible = "mpc5200b-gpt\0mpc5200-gpt";
|
|
device_type = "gpt";
|
|
cell-index = <1>;
|
|
reg = <610 10>;
|
|
interrupts = <1 a 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
gpt@620 { // General Purpose Timer
|
|
compatible = "mpc5200b-gpt\0mpc5200-gpt";
|
|
device_type = "gpt";
|
|
cell-index = <2>;
|
|
reg = <620 10>;
|
|
interrupts = <1 b 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
gpt@630 { // General Purpose Timer
|
|
compatible = "mpc5200b-gpt\0mpc5200-gpt";
|
|
device_type = "gpt";
|
|
cell-index = <3>;
|
|
reg = <630 10>;
|
|
interrupts = <1 c 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
gpt@640 { // General Purpose Timer
|
|
compatible = "mpc5200b-gpt\0mpc5200-gpt";
|
|
device_type = "gpt";
|
|
cell-index = <4>;
|
|
reg = <640 10>;
|
|
interrupts = <1 d 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
gpt@650 { // General Purpose Timer
|
|
compatible = "mpc5200b-gpt\0mpc5200-gpt";
|
|
device_type = "gpt";
|
|
cell-index = <5>;
|
|
reg = <650 10>;
|
|
interrupts = <1 e 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
gpt@660 { // General Purpose Timer
|
|
compatible = "mpc5200b-gpt\0mpc5200-gpt";
|
|
device_type = "gpt";
|
|
cell-index = <6>;
|
|
reg = <660 10>;
|
|
interrupts = <1 f 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
gpt@670 { // General Purpose Timer
|
|
compatible = "mpc5200b-gpt\0mpc5200-gpt";
|
|
device_type = "gpt";
|
|
cell-index = <7>;
|
|
reg = <670 10>;
|
|
interrupts = <1 10 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
rtc@800 { // Real time clock
|
|
compatible = "mpc5200b-rtc\0mpc5200-rtc";
|
|
device_type = "rtc";
|
|
reg = <800 100>;
|
|
interrupts = <1 5 0 1 6 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
mscan@900 {
|
|
device_type = "mscan";
|
|
compatible = "mpc5200b-mscan\0mpc5200-mscan";
|
|
cell-index = <0>;
|
|
interrupts = <2 11 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
reg = <900 80>;
|
|
};
|
|
|
|
mscan@980 {
|
|
device_type = "mscan";
|
|
compatible = "mpc5200b-mscan\0mpc5200-mscan";
|
|
cell-index = <1>;
|
|
interrupts = <2 12 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
reg = <980 80>;
|
|
};
|
|
|
|
gpio@b00 {
|
|
compatible = "mpc5200b-gpio\0mpc5200-gpio";
|
|
reg = <b00 40>;
|
|
interrupts = <1 7 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
gpio-wkup@c00 {
|
|
compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
|
|
reg = <c00 40>;
|
|
interrupts = <1 8 0 0 3 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
pci@0d00 {
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
compatible = "mpc5200b-pci\0mpc5200-pci";
|
|
reg = <d00 100>;
|
|
interrupt-map-mask = <f800 0 0 7>;
|
|
interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
|
|
c000 0 0 2 &mpc5200_pic 1 1 3
|
|
c000 0 0 3 &mpc5200_pic 1 2 3
|
|
c000 0 0 4 &mpc5200_pic 1 3 3
|
|
|
|
c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
|
|
c800 0 0 2 &mpc5200_pic 1 2 3
|
|
c800 0 0 3 &mpc5200_pic 1 3 3
|
|
c800 0 0 4 &mpc5200_pic 0 0 3>;
|
|
clock-frequency = <0>; // From boot loader
|
|
interrupts = <2 8 0 2 9 0 2 a 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
bus-range = <0 0>;
|
|
ranges = <42000000 0 80000000 80000000 0 20000000
|
|
02000000 0 a0000000 a0000000 0 10000000
|
|
01000000 0 00000000 b0000000 0 01000000>;
|
|
};
|
|
|
|
spi@f00 {
|
|
device_type = "spi";
|
|
compatible = "mpc5200b-spi\0mpc5200-spi";
|
|
reg = <f00 20>;
|
|
interrupts = <2 d 0 2 e 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
usb@1000 {
|
|
device_type = "usb-ohci-be";
|
|
compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be";
|
|
reg = <1000 ff>;
|
|
interrupts = <2 6 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
bestcomm@1200 {
|
|
device_type = "dma-controller";
|
|
compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm";
|
|
reg = <1200 80>;
|
|
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
|
3 4 0 3 5 0 3 6 0 3 7 0
|
|
3 8 0 3 9 0 3 a 0 3 b 0
|
|
3 c 0 3 d 0 3 e 0 3 f 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
xlb@1f00 {
|
|
compatible = "mpc5200b-xlb\0mpc5200-xlb";
|
|
reg = <1f00 100>;
|
|
};
|
|
|
|
serial@2000 { // PSC1
|
|
device_type = "serial";
|
|
compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
|
|
port-number = <0>; // Logical port assignment
|
|
cell-index = <0>;
|
|
reg = <2000 100>;
|
|
interrupts = <2 1 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
// PSC2 in ac97 mode example
|
|
//ac97@2200 { // PSC2
|
|
// device_type = "sound";
|
|
// compatible = "mpc5200b-psc-ac97\0mpc5200-psc-ac97";
|
|
// cell-index = <1>;
|
|
// reg = <2200 100>;
|
|
// interrupts = <2 2 0>;
|
|
// interrupt-parent = <&mpc5200_pic>;
|
|
//};
|
|
|
|
// PSC3 in CODEC mode example
|
|
//i2s@2400 { // PSC3
|
|
// device_type = "sound";
|
|
// compatible = "mpc5200b-psc-i2s"; //not 5200 compatible
|
|
// cell-index = <2>;
|
|
// reg = <2400 100>;
|
|
// interrupts = <2 3 0>;
|
|
// interrupt-parent = <&mpc5200_pic>;
|
|
//};
|
|
|
|
// PSC4 in uart mode example
|
|
//serial@2600 { // PSC4
|
|
// device_type = "serial";
|
|
// compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
|
|
// cell-index = <3>;
|
|
// reg = <2600 100>;
|
|
// interrupts = <2 b 0>;
|
|
// interrupt-parent = <&mpc5200_pic>;
|
|
//};
|
|
|
|
// PSC5 in uart mode example
|
|
//serial@2800 { // PSC5
|
|
// device_type = "serial";
|
|
// compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
|
|
// cell-index = <4>;
|
|
// reg = <2800 100>;
|
|
// interrupts = <2 c 0>;
|
|
// interrupt-parent = <&mpc5200_pic>;
|
|
//};
|
|
|
|
// PSC6 in spi mode example
|
|
//spi@2c00 { // PSC6
|
|
// device_type = "spi";
|
|
// compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi";
|
|
// cell-index = <5>;
|
|
// reg = <2c00 100>;
|
|
// interrupts = <2 4 0>;
|
|
// interrupt-parent = <&mpc5200_pic>;
|
|
//};
|
|
|
|
ethernet@3000 {
|
|
device_type = "network";
|
|
compatible = "mpc5200b-fec\0mpc5200-fec";
|
|
reg = <3000 800>;
|
|
mac-address = [ 02 03 04 05 06 07 ]; // Bad!
|
|
interrupts = <2 5 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
ata@3a00 {
|
|
device_type = "ata";
|
|
compatible = "mpc5200b-ata\0mpc5200-ata";
|
|
reg = <3a00 100>;
|
|
interrupts = <2 7 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
i2c@3d00 {
|
|
device_type = "i2c";
|
|
compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
|
|
cell-index = <0>;
|
|
reg = <3d00 40>;
|
|
interrupts = <2 f 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
fsl5200-clocking;
|
|
};
|
|
|
|
i2c@3d40 {
|
|
device_type = "i2c";
|
|
compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
|
|
cell-index = <1>;
|
|
reg = <3d40 40>;
|
|
interrupts = <2 10 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
fsl5200-clocking;
|
|
};
|
|
sram@8000 {
|
|
device_type = "sram";
|
|
compatible = "mpc5200b-sram\0mpc5200-sram\0sram";
|
|
reg = <8000 4000>;
|
|
};
|
|
};
|
|
};
|