Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/arm
History
Andy Green f01fdac005 ARM: SMDK6410: Add nC1 chipselect SROM setup 
Since the mach-smdk6410.c file claims it can start up the
smsc9115 ethernet device on the board, it should take care
about configuring the necessary chip select nCS1 so it can
see the chip.  The select defaults to 8-bit mode so without
config the Ethernet doesn't work.

This patch uses the new SROM definitions to set nCS1 to the
state found in the Samsung U-Boot port for 6410.  It may be
more conservative that it needs to be since those settings
were marked as for CS8900A also using this chip select.

But this change is enough to get the ethernet working when
booted with Qi.

Signed-off-by: Andy Green <andy@warmcat.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-18 11:41:03 +09:00
..
boot arm: add support for LZO-compressed kernels 2010-01-11 09:34:05 -08:00
common ARM: 5857/1: ARM: dmabounce: fix build 2009-12-22 15:32:32 +00:00
configs ARM: SAMSUNG: Move S3C24XX ADC driver to plat-samsung 2010-01-18 09:30:49 +09:00
include/asm ARM: Add common entry code for system with two VICs 2010-01-15 17:10:14 +09:00
kernel ARM: Fix wrong dmb 2010-01-12 18:59:16 +00:00
lib Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6 2009-09-19 13:47:57 +01:00
mach-aaec2000
mach-at91 atmel-mci: change use of dma slave interface 2009-12-15 08:53:35 -08:00
mach-bcmring Merge git://git.infradead.org/mtd-2.6 2009-12-16 10:23:43 -08:00
mach-clps711x ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug 2009-12-13 16:33:19 +00:00
mach-davinci DaVinci: DM365: Add the device_enable for the DaVinci Keyscan 2010-01-06 08:57:45 -08:00
mach-dove ARM: Add Tauros2 L2 cache controller support 2009-11-27 15:43:21 -05:00
mach-ebsa110
mach-ep93xx Input: ep93xx_keypad - update driver to new core support 2009-12-15 08:54:45 -08:00
mach-footbridge ARM: footbridge: trim down old ISA rtc setup 2009-12-24 13:39:18 +00:00
mach-gemini
mach-h720x
mach-integrator ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug 2009-12-13 16:33:19 +00:00
mach-iop13xx Merge branch 'devel-stable' into devel 2009-12-05 10:35:33 +00:00
mach-iop32x iop: enable generic time 2009-10-29 11:46:55 -07:00
mach-iop33x iop: enable generic time 2009-10-29 11:46:55 -07:00
mach-ixp4xx IXP4xx: GTWX5715 platform only has two PCI IRQ lines, not four. 2009-12-05 16:58:41 +01:00
mach-ixp23xx ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug 2009-12-13 16:33:19 +00:00
mach-ixp2000 ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug 2009-12-13 16:33:19 +00:00
mach-kirkwood [ARM] Kirkwood: Add LaCie Network Space v2 support 2009-12-10 23:01:57 -05:00
mach-ks8695 ARM: dma-mapping: provide dma_to_page() 2009-11-23 12:53:54 +00:00
mach-l7200
mach-lh7a40x ARM: 5871/1: arch/arm: Fix build failure for lpd7a404_defconfig caused by missing includes 2010-01-10 00:08:14 +00:00
mach-loki
mach-mmp [ARM] pxa/ttc_dkb: remove duplicate macro definition 2009-12-29 14:11:33 +08:00
mach-msm HTC Dream: mmc compilation fixes 2009-12-10 10:14:34 -08:00
mach-mv78xx0 [ARM] properly report mv78100 stepping A1 2009-11-05 23:03:19 -05:00
mach-mx1
mach-mx2 mx27: mxt_td60: Remove not used UART pins 2010-01-04 11:47:43 +01:00
mach-mx3 imx/mx3: depend on USB_ULPI for otg_ulpi_create 2010-01-04 13:26:23 +01:00
mach-mx25 mx25: pdk: add platform code for FEC support 2010-01-04 11:47:44 +01:00
mach-mxc91231
mach-netx
mach-nomadik Merge git://git.infradead.org/mtd-2.6 2009-12-16 10:23:43 -08:00
mach-ns9xxx genirq: Convert irq_desc.lock to raw_spinlock 2009-12-14 23:55:33 +01:00
mach-omap1 Merge branch 'for_2.6.33rc_c' of git://git.pwsan.com/linux-2.6 into omap-fixes-for-linus 2010-01-08 14:27:56 -08:00
mach-omap2 Merge branch 'for_2.6.33rc_c' of git://git.pwsan.com/linux-2.6 into omap-fixes-for-linus 2010-01-08 14:27:56 -08:00
mach-orion5x tree-wide: fix assorted typos all over the place 2009-12-04 15:39:55 +01:00
mach-pnx4008
mach-pxa [ARM] pxa: fix strange characters in zaurus gpio .desc 2010-01-08 09:42:45 +08:00
mach-realview ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boards 2010-01-11 15:39:21 +00:00
mach-rpc
mach-s3c24a0/include/mach ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug 2009-12-13 16:33:19 +00:00
mach-s3c2400 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2009-12-09 19:43:33 -08:00
mach-s3c2410 ARM: S3C24XX: touchscreen device definition 2009-12-23 19:28:12 +00:00
mach-s3c2412 ARM: SAMSUNG: Reduce size of struct clk. 2010-01-15 17:10:10 +09:00
mach-s3c2440 ARM: SAMSUNG: Reduce size of struct clk. 2010-01-15 17:10:10 +09:00
mach-s3c2442 ARM: SAMSUNG: Reduce size of struct clk. 2010-01-15 17:10:10 +09:00
mach-s3c2443 ARM: SAMSUNG: Add call to register array of clocks 2010-01-15 17:10:11 +09:00
mach-s3c6400 ARM: S3C64XX: Add SROM register definitions 2010-01-18 11:41:03 +09:00
mach-s3c6410 ARM: SMDK6410: Add nC1 chipselect SROM setup 2010-01-18 11:41:03 +09:00
mach-s5p6440 ARM: S5P6440: Add Board support file 2010-01-15 19:16:36 +09:00
mach-s5pc100 ARM: S5PC1XX: Move to using standard timer IRQ handling code 2010-01-15 17:10:16 +09:00
mach-sa1100 ARM: fix sa1100 build 2009-12-13 19:38:08 +00:00
mach-shark
mach-stmp37xx
mach-stmp378x
mach-u300 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx 2009-12-16 10:28:56 -08:00
mach-ux500 ARM: 5832/1: ARM: U8500 Makefile.boot 2009-11-28 10:22:52 +00:00
mach-versatile ARM: 5720/1: Move MMCI header to amba include dir 2009-09-22 20:49:04 +01:00
mach-w90x900 ARM: 5864/1: Implement arch_reset() in NUC900 2010-01-05 20:52:45 +00:00
mm Merge master.kernel.org:/home/rmk/linux-2.6-arm 2010-01-12 20:56:01 -08:00
nwfpe ARM: Kill CONFIG_CPU_32 2009-12-18 16:07:53 +00:00
oprofile ARM: 5849/1: ARMv7: fix Oprofile events count 2009-12-22 15:32:31 +00:00
plat-iop iop: implement sched_clock() 2009-10-29 11:46:56 -07:00
plat-mxc mx25: add support for FEC on i.MX25 2010-01-04 11:47:44 +01:00
plat-nomadik ARM: 5833/1: ARM nomadik: enable U8500 for common platform 2009-11-28 10:22:53 +00:00
plat-omap Merge branch 'for_2.6.33rc_c' of git://git.pwsan.com/linux-2.6 into omap-fixes-for-linus 2010-01-08 14:27:56 -08:00
plat-orion
plat-pxa [ARM] pxa: use resource_size() in pwm.c 2009-12-29 14:11:27 +08:00
plat-s3c ARM: S3C64XX: Add S3C64XX support to the generic Samsung ADC driver 2010-01-18 09:30:49 +09:00
plat-s3c24xx ARM: SAMSUNG: Move S3C24XX ADC driver to plat-samsung 2010-01-18 09:30:49 +09:00
plat-s3c64xx ARM: S3C64XX: Add SROM register definitions 2010-01-18 11:41:03 +09:00
plat-s5p ARM: S5P6440: Add serial port support 2010-01-15 19:16:47 +09:00
plat-s5pc1xx ARM: S5PC1XX: Use common UART IRQ handling code 2010-01-15 17:10:16 +09:00
plat-samsung ARM: S3C64XX: Add S3C64XX support to the generic Samsung ADC driver 2010-01-18 09:30:49 +09:00
plat-stmp3xxx ARM: STMP3xxx: deallocation with negative index of descriptors[] 2009-09-19 12:14:05 +01:00
tools Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm 2009-12-17 15:53:41 -08:00
vfp ARM: Convert VFP/Crunch/XscaleCP thread_release() to exit_thread() 2009-12-18 14:53:41 +00:00
Kconfig ARM: S5P6440: Add new Kconfig and Makefiles 2010-01-15 19:16:32 +09:00
Kconfig-nommu
Kconfig.debug Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-12-13 16:35:09 +00:00
Makefile ARM: S5P6440: Add new Kconfig and Makefiles 2010-01-15 19:16:32 +09:00