kernel-fxtec-pro1x/include/net/dn_dev.h
Eric Dumazet fc766e4c49 decnet: RCU conversion and get rid of dev_base_lock
While tracking dev_base_lock users, I found decnet used it in
dnet_select_source(), but for a wrong purpose:

Writers only hold RTNL, not dev_base_lock, so readers must use RCU if
they cannot use RTNL.

Adds an rcu_head in struct dn_ifaddr and handle proper RCU management.

Adds __rcu annotation in dn_route as well.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-08 13:50:08 -08:00

198 lines
5.4 KiB
C

#ifndef _NET_DN_DEV_H
#define _NET_DN_DEV_H
struct dn_dev;
struct dn_ifaddr {
struct dn_ifaddr __rcu *ifa_next;
struct dn_dev *ifa_dev;
__le16 ifa_local;
__le16 ifa_address;
__u8 ifa_flags;
__u8 ifa_scope;
char ifa_label[IFNAMSIZ];
struct rcu_head rcu;
};
#define DN_DEV_S_RU 0 /* Run - working normally */
#define DN_DEV_S_CR 1 /* Circuit Rejected */
#define DN_DEV_S_DS 2 /* Data Link Start */
#define DN_DEV_S_RI 3 /* Routing Layer Initialize */
#define DN_DEV_S_RV 4 /* Routing Layer Verify */
#define DN_DEV_S_RC 5 /* Routing Layer Complete */
#define DN_DEV_S_OF 6 /* Off */
#define DN_DEV_S_HA 7 /* Halt */
/*
* The dn_dev_parms structure contains the set of parameters
* for each device (hence inclusion in the dn_dev structure)
* and an array is used to store the default types of supported
* device (in dn_dev.c).
*
* The type field matches the ARPHRD_ constants and is used in
* searching the list for supported devices when new devices
* come up.
*
* The mode field is used to find out if a device is broadcast,
* multipoint, or pointopoint. Please note that DECnet thinks
* different ways about devices to the rest of the kernel
* so the normal IFF_xxx flags are invalid here. For devices
* which can be any combination of the previously mentioned
* attributes, you can set this on a per device basis by
* installing an up() routine.
*
* The device state field, defines the initial state in which the
* device will come up. In the dn_dev structure, it is the actual
* state.
*
* Things have changed here. I've killed timer1 since it's a user space
* issue for a user space routing deamon to sort out. The kernel does
* not need to be bothered with it.
*
* Timers:
* t2 - Rate limit timer, min time between routing and hello messages
* t3 - Hello timer, send hello messages when it expires
*
* Callbacks:
* up() - Called to initialize device, return value can veto use of
* device with DECnet.
* down() - Called to turn device off when it goes down
* timer3() - Called once for each ifaddr when timer 3 goes off
*
* sysctl - Hook for sysctl things
*
*/
struct dn_dev_parms {
int type; /* ARPHRD_xxx */
int mode; /* Broadcast, Unicast, Mulitpoint */
#define DN_DEV_BCAST 1
#define DN_DEV_UCAST 2
#define DN_DEV_MPOINT 4
int state; /* Initial state */
int forwarding; /* 0=EndNode, 1=L1Router, 2=L2Router */
unsigned long t2; /* Default value of t2 */
unsigned long t3; /* Default value of t3 */
int priority; /* Priority to be a router */
char *name; /* Name for sysctl */
int (*up)(struct net_device *);
void (*down)(struct net_device *);
void (*timer3)(struct net_device *, struct dn_ifaddr *ifa);
void *sysctl;
};
struct dn_dev {
struct dn_ifaddr __rcu *ifa_list;
struct net_device *dev;
struct dn_dev_parms parms;
char use_long;
struct timer_list timer;
unsigned long t3;
struct neigh_parms *neigh_parms;
__u8 addr[ETH_ALEN];
struct neighbour *router; /* Default router on circuit */
struct neighbour *peer; /* Peer on pointopoint links */
unsigned long uptime; /* Time device went up in jiffies */
};
struct dn_short_packet {
__u8 msgflg;
__le16 dstnode;
__le16 srcnode;
__u8 forward;
} __packed;
struct dn_long_packet {
__u8 msgflg;
__u8 d_area;
__u8 d_subarea;
__u8 d_id[6];
__u8 s_area;
__u8 s_subarea;
__u8 s_id[6];
__u8 nl2;
__u8 visit_ct;
__u8 s_class;
__u8 pt;
} __packed;
/*------------------------- DRP - Routing messages ---------------------*/
struct endnode_hello_message {
__u8 msgflg;
__u8 tiver[3];
__u8 id[6];
__u8 iinfo;
__le16 blksize;
__u8 area;
__u8 seed[8];
__u8 neighbor[6];
__le16 timer;
__u8 mpd;
__u8 datalen;
__u8 data[2];
} __packed;
struct rtnode_hello_message {
__u8 msgflg;
__u8 tiver[3];
__u8 id[6];
__u8 iinfo;
__le16 blksize;
__u8 priority;
__u8 area;
__le16 timer;
__u8 mpd;
} __packed;
extern void dn_dev_init(void);
extern void dn_dev_cleanup(void);
extern int dn_dev_ioctl(unsigned int cmd, void __user *arg);
extern void dn_dev_devices_off(void);
extern void dn_dev_devices_on(void);
extern void dn_dev_init_pkt(struct sk_buff *skb);
extern void dn_dev_veri_pkt(struct sk_buff *skb);
extern void dn_dev_hello(struct sk_buff *skb);
extern void dn_dev_up(struct net_device *);
extern void dn_dev_down(struct net_device *);
extern int dn_dev_set_default(struct net_device *dev, int force);
extern struct net_device *dn_dev_get_default(void);
extern int dn_dev_bind_default(__le16 *addr);
extern int register_dnaddr_notifier(struct notifier_block *nb);
extern int unregister_dnaddr_notifier(struct notifier_block *nb);
static inline int dn_dev_islocal(struct net_device *dev, __le16 addr)
{
struct dn_dev *dn_db;
struct dn_ifaddr *ifa;
int res = 0;
rcu_read_lock();
dn_db = rcu_dereference(dev->dn_ptr);
if (dn_db == NULL) {
printk(KERN_DEBUG "dn_dev_islocal: Called for non DECnet device\n");
goto out;
}
for (ifa = rcu_dereference(dn_db->ifa_list);
ifa != NULL;
ifa = rcu_dereference(ifa->ifa_next))
if ((addr ^ ifa->ifa_local) == 0) {
res = 1;
break;
}
out:
rcu_read_unlock();
return res;
}
#endif /* _NET_DN_DEV_H */