5ca032ee21
In the initial submission of the MSP driver msp1 and msp3's associated pinctrl mechanism was passed back to platform code using a plat_init() call-back routine, but it has no place in platform code. The MSP driver should set this up for the appropriate ports. Instead we use a use_pinctrl identifier which is passed from platform_data/Device Tree which indicates which ports should use pinctrl. Acked-by: Ola Lilja <ola.o.lilja@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
557 lines
13 KiB
C
557 lines
13 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2012
|
|
*
|
|
* Author: Ola Lilja <ola.o.lilja@stericsson.com>,
|
|
* for ST-Ericsson.
|
|
*
|
|
* License terms:
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
|
|
#ifndef UX500_MSP_I2S_H
|
|
#define UX500_MSP_I2S_H
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <mach/msp.h>
|
|
|
|
#define MSP_INPUT_FREQ_APB 48000000
|
|
|
|
/*** Stereo mode. Used for APB data accesses as 16 bits accesses (mono),
|
|
* 32 bits accesses (stereo).
|
|
***/
|
|
enum msp_stereo_mode {
|
|
MSP_MONO,
|
|
MSP_STEREO
|
|
};
|
|
|
|
/* Direction (Transmit/Receive mode) */
|
|
enum msp_direction {
|
|
MSP_TX = 1,
|
|
MSP_RX = 2
|
|
};
|
|
|
|
/* Transmit and receive configuration register */
|
|
#define MSP_BIG_ENDIAN 0x00000000
|
|
#define MSP_LITTLE_ENDIAN 0x00001000
|
|
#define MSP_UNEXPECTED_FS_ABORT 0x00000000
|
|
#define MSP_UNEXPECTED_FS_IGNORE 0x00008000
|
|
#define MSP_NON_MODE_BIT_MASK 0x00009000
|
|
|
|
/* Global configuration register */
|
|
#define RX_ENABLE 0x00000001
|
|
#define RX_FIFO_ENABLE 0x00000002
|
|
#define RX_SYNC_SRG 0x00000010
|
|
#define RX_CLK_POL_RISING 0x00000020
|
|
#define RX_CLK_SEL_SRG 0x00000040
|
|
#define TX_ENABLE 0x00000100
|
|
#define TX_FIFO_ENABLE 0x00000200
|
|
#define TX_SYNC_SRG_PROG 0x00001800
|
|
#define TX_SYNC_SRG_AUTO 0x00001000
|
|
#define TX_CLK_POL_RISING 0x00002000
|
|
#define TX_CLK_SEL_SRG 0x00004000
|
|
#define TX_EXTRA_DELAY_ENABLE 0x00008000
|
|
#define SRG_ENABLE 0x00010000
|
|
#define FRAME_GEN_ENABLE 0x00100000
|
|
#define SRG_CLK_SEL_APB 0x00000000
|
|
#define RX_FIFO_SYNC_HI 0x00000000
|
|
#define TX_FIFO_SYNC_HI 0x00000000
|
|
#define SPI_CLK_MODE_NORMAL 0x00000000
|
|
|
|
#define MSP_FRAME_SIZE_AUTO -1
|
|
|
|
#define MSP_DR 0x00
|
|
#define MSP_GCR 0x04
|
|
#define MSP_TCF 0x08
|
|
#define MSP_RCF 0x0c
|
|
#define MSP_SRG 0x10
|
|
#define MSP_FLR 0x14
|
|
#define MSP_DMACR 0x18
|
|
|
|
#define MSP_IMSC 0x20
|
|
#define MSP_RIS 0x24
|
|
#define MSP_MIS 0x28
|
|
#define MSP_ICR 0x2c
|
|
#define MSP_MCR 0x30
|
|
#define MSP_RCV 0x34
|
|
#define MSP_RCM 0x38
|
|
|
|
#define MSP_TCE0 0x40
|
|
#define MSP_TCE1 0x44
|
|
#define MSP_TCE2 0x48
|
|
#define MSP_TCE3 0x4c
|
|
|
|
#define MSP_RCE0 0x60
|
|
#define MSP_RCE1 0x64
|
|
#define MSP_RCE2 0x68
|
|
#define MSP_RCE3 0x6c
|
|
#define MSP_IODLY 0x70
|
|
|
|
#define MSP_ITCR 0x80
|
|
#define MSP_ITIP 0x84
|
|
#define MSP_ITOP 0x88
|
|
#define MSP_TSTDR 0x8c
|
|
|
|
#define MSP_PID0 0xfe0
|
|
#define MSP_PID1 0xfe4
|
|
#define MSP_PID2 0xfe8
|
|
#define MSP_PID3 0xfec
|
|
|
|
#define MSP_CID0 0xff0
|
|
#define MSP_CID1 0xff4
|
|
#define MSP_CID2 0xff8
|
|
#define MSP_CID3 0xffc
|
|
|
|
/* Protocol dependant parameters list */
|
|
#define RX_ENABLE_MASK BIT(0)
|
|
#define RX_FIFO_ENABLE_MASK BIT(1)
|
|
#define RX_FSYNC_MASK BIT(2)
|
|
#define DIRECT_COMPANDING_MASK BIT(3)
|
|
#define RX_SYNC_SEL_MASK BIT(4)
|
|
#define RX_CLK_POL_MASK BIT(5)
|
|
#define RX_CLK_SEL_MASK BIT(6)
|
|
#define LOOPBACK_MASK BIT(7)
|
|
#define TX_ENABLE_MASK BIT(8)
|
|
#define TX_FIFO_ENABLE_MASK BIT(9)
|
|
#define TX_FSYNC_MASK BIT(10)
|
|
#define TX_MSP_TDR_TSR BIT(11)
|
|
#define TX_SYNC_SEL_MASK (BIT(12) | BIT(11))
|
|
#define TX_CLK_POL_MASK BIT(13)
|
|
#define TX_CLK_SEL_MASK BIT(14)
|
|
#define TX_EXTRA_DELAY_MASK BIT(15)
|
|
#define SRG_ENABLE_MASK BIT(16)
|
|
#define SRG_CLK_POL_MASK BIT(17)
|
|
#define SRG_CLK_SEL_MASK (BIT(19) | BIT(18))
|
|
#define FRAME_GEN_EN_MASK BIT(20)
|
|
#define SPI_CLK_MODE_MASK (BIT(22) | BIT(21))
|
|
#define SPI_BURST_MODE_MASK BIT(23)
|
|
|
|
#define RXEN_SHIFT 0
|
|
#define RFFEN_SHIFT 1
|
|
#define RFSPOL_SHIFT 2
|
|
#define DCM_SHIFT 3
|
|
#define RFSSEL_SHIFT 4
|
|
#define RCKPOL_SHIFT 5
|
|
#define RCKSEL_SHIFT 6
|
|
#define LBM_SHIFT 7
|
|
#define TXEN_SHIFT 8
|
|
#define TFFEN_SHIFT 9
|
|
#define TFSPOL_SHIFT 10
|
|
#define TFSSEL_SHIFT 11
|
|
#define TCKPOL_SHIFT 13
|
|
#define TCKSEL_SHIFT 14
|
|
#define TXDDL_SHIFT 15
|
|
#define SGEN_SHIFT 16
|
|
#define SCKPOL_SHIFT 17
|
|
#define SCKSEL_SHIFT 18
|
|
#define FGEN_SHIFT 20
|
|
#define SPICKM_SHIFT 21
|
|
#define TBSWAP_SHIFT 28
|
|
|
|
#define RCKPOL_MASK BIT(0)
|
|
#define TCKPOL_MASK BIT(0)
|
|
#define SPICKM_MASK (BIT(1) | BIT(0))
|
|
#define MSP_RX_CLKPOL_BIT(n) ((n & RCKPOL_MASK) << RCKPOL_SHIFT)
|
|
#define MSP_TX_CLKPOL_BIT(n) ((n & TCKPOL_MASK) << TCKPOL_SHIFT)
|
|
|
|
#define P1ELEN_SHIFT 0
|
|
#define P1FLEN_SHIFT 3
|
|
#define DTYP_SHIFT 10
|
|
#define ENDN_SHIFT 12
|
|
#define DDLY_SHIFT 13
|
|
#define FSIG_SHIFT 15
|
|
#define P2ELEN_SHIFT 16
|
|
#define P2FLEN_SHIFT 19
|
|
#define P2SM_SHIFT 26
|
|
#define P2EN_SHIFT 27
|
|
#define FSYNC_SHIFT 15
|
|
|
|
#define P1ELEN_MASK 0x00000007
|
|
#define P2ELEN_MASK 0x00070000
|
|
#define P1FLEN_MASK 0x00000378
|
|
#define P2FLEN_MASK 0x03780000
|
|
#define DDLY_MASK 0x00003000
|
|
#define DTYP_MASK 0x00000600
|
|
#define P2SM_MASK 0x04000000
|
|
#define P2EN_MASK 0x08000000
|
|
#define ENDN_MASK 0x00001000
|
|
#define TFSPOL_MASK 0x00000400
|
|
#define TBSWAP_MASK 0x30000000
|
|
#define COMPANDING_MODE_MASK 0x00000c00
|
|
#define FSYNC_MASK 0x00008000
|
|
|
|
#define MSP_P1_ELEM_LEN_BITS(n) (n & P1ELEN_MASK)
|
|
#define MSP_P2_ELEM_LEN_BITS(n) (((n) << P2ELEN_SHIFT) & P2ELEN_MASK)
|
|
#define MSP_P1_FRAME_LEN_BITS(n) (((n) << P1FLEN_SHIFT) & P1FLEN_MASK)
|
|
#define MSP_P2_FRAME_LEN_BITS(n) (((n) << P2FLEN_SHIFT) & P2FLEN_MASK)
|
|
#define MSP_DATA_DELAY_BITS(n) (((n) << DDLY_SHIFT) & DDLY_MASK)
|
|
#define MSP_DATA_TYPE_BITS(n) (((n) << DTYP_SHIFT) & DTYP_MASK)
|
|
#define MSP_P2_START_MODE_BIT(n) ((n << P2SM_SHIFT) & P2SM_MASK)
|
|
#define MSP_P2_ENABLE_BIT(n) ((n << P2EN_SHIFT) & P2EN_MASK)
|
|
#define MSP_SET_ENDIANNES_BIT(n) ((n << ENDN_SHIFT) & ENDN_MASK)
|
|
#define MSP_FSYNC_POL(n) ((n << TFSPOL_SHIFT) & TFSPOL_MASK)
|
|
#define MSP_DATA_WORD_SWAP(n) ((n << TBSWAP_SHIFT) & TBSWAP_MASK)
|
|
#define MSP_SET_COMPANDING_MODE(n) ((n << DTYP_SHIFT) & \
|
|
COMPANDING_MODE_MASK)
|
|
#define MSP_SET_FSYNC_IGNORE(n) ((n << FSYNC_SHIFT) & FSYNC_MASK)
|
|
|
|
/* Flag register */
|
|
#define RX_BUSY BIT(0)
|
|
#define RX_FIFO_EMPTY BIT(1)
|
|
#define RX_FIFO_FULL BIT(2)
|
|
#define TX_BUSY BIT(3)
|
|
#define TX_FIFO_EMPTY BIT(4)
|
|
#define TX_FIFO_FULL BIT(5)
|
|
|
|
#define RBUSY_SHIFT 0
|
|
#define RFE_SHIFT 1
|
|
#define RFU_SHIFT 2
|
|
#define TBUSY_SHIFT 3
|
|
#define TFE_SHIFT 4
|
|
#define TFU_SHIFT 5
|
|
|
|
/* Multichannel control register */
|
|
#define RMCEN_SHIFT 0
|
|
#define RMCSF_SHIFT 1
|
|
#define RCMPM_SHIFT 3
|
|
#define TMCEN_SHIFT 5
|
|
#define TNCSF_SHIFT 6
|
|
|
|
/* Sample rate generator register */
|
|
#define SCKDIV_SHIFT 0
|
|
#define FRWID_SHIFT 10
|
|
#define FRPER_SHIFT 16
|
|
|
|
#define SCK_DIV_MASK 0x0000003FF
|
|
#define FRAME_WIDTH_BITS(n) (((n) << FRWID_SHIFT) & 0x0000FC00)
|
|
#define FRAME_PERIOD_BITS(n) (((n) << FRPER_SHIFT) & 0x1FFF0000)
|
|
|
|
/* DMA controller register */
|
|
#define RX_DMA_ENABLE BIT(0)
|
|
#define TX_DMA_ENABLE BIT(1)
|
|
|
|
#define RDMAE_SHIFT 0
|
|
#define TDMAE_SHIFT 1
|
|
|
|
/* Interrupt Register */
|
|
#define RX_SERVICE_INT BIT(0)
|
|
#define RX_OVERRUN_ERROR_INT BIT(1)
|
|
#define RX_FSYNC_ERR_INT BIT(2)
|
|
#define RX_FSYNC_INT BIT(3)
|
|
#define TX_SERVICE_INT BIT(4)
|
|
#define TX_UNDERRUN_ERR_INT BIT(5)
|
|
#define TX_FSYNC_ERR_INT BIT(6)
|
|
#define TX_FSYNC_INT BIT(7)
|
|
#define ALL_INT 0x000000ff
|
|
|
|
/* MSP test control register */
|
|
#define MSP_ITCR_ITEN BIT(0)
|
|
#define MSP_ITCR_TESTFIFO BIT(1)
|
|
|
|
#define RMCEN_BIT 0
|
|
#define RMCSF_BIT 1
|
|
#define RCMPM_BIT 3
|
|
#define TMCEN_BIT 5
|
|
#define TNCSF_BIT 6
|
|
|
|
/* Single or dual phase mode */
|
|
enum msp_phase_mode {
|
|
MSP_SINGLE_PHASE,
|
|
MSP_DUAL_PHASE
|
|
};
|
|
|
|
/* Frame length */
|
|
enum msp_frame_length {
|
|
MSP_FRAME_LEN_1 = 0,
|
|
MSP_FRAME_LEN_2 = 1,
|
|
MSP_FRAME_LEN_4 = 3,
|
|
MSP_FRAME_LEN_8 = 7,
|
|
MSP_FRAME_LEN_12 = 11,
|
|
MSP_FRAME_LEN_16 = 15,
|
|
MSP_FRAME_LEN_20 = 19,
|
|
MSP_FRAME_LEN_32 = 31,
|
|
MSP_FRAME_LEN_48 = 47,
|
|
MSP_FRAME_LEN_64 = 63
|
|
};
|
|
|
|
/* Element length */
|
|
enum msp_elem_length {
|
|
MSP_ELEM_LEN_8 = 0,
|
|
MSP_ELEM_LEN_10 = 1,
|
|
MSP_ELEM_LEN_12 = 2,
|
|
MSP_ELEM_LEN_14 = 3,
|
|
MSP_ELEM_LEN_16 = 4,
|
|
MSP_ELEM_LEN_20 = 5,
|
|
MSP_ELEM_LEN_24 = 6,
|
|
MSP_ELEM_LEN_32 = 7
|
|
};
|
|
|
|
enum msp_data_xfer_width {
|
|
MSP_DATA_TRANSFER_WIDTH_BYTE,
|
|
MSP_DATA_TRANSFER_WIDTH_HALFWORD,
|
|
MSP_DATA_TRANSFER_WIDTH_WORD
|
|
};
|
|
|
|
enum msp_frame_sync {
|
|
MSP_FSYNC_UNIGNORE = 0,
|
|
MSP_FSYNC_IGNORE = 1,
|
|
};
|
|
|
|
enum msp_phase2_start_mode {
|
|
MSP_PHASE2_START_MODE_IMEDIATE,
|
|
MSP_PHASE2_START_MODE_FSYNC
|
|
};
|
|
|
|
enum msp_btf {
|
|
MSP_BTF_MS_BIT_FIRST = 0,
|
|
MSP_BTF_LS_BIT_FIRST = 1
|
|
};
|
|
|
|
enum msp_fsync_pol {
|
|
MSP_FSYNC_POL_ACT_HI = 0,
|
|
MSP_FSYNC_POL_ACT_LO = 1
|
|
};
|
|
|
|
/* Data delay (in bit clock cycles) */
|
|
enum msp_delay {
|
|
MSP_DELAY_0 = 0,
|
|
MSP_DELAY_1 = 1,
|
|
MSP_DELAY_2 = 2,
|
|
MSP_DELAY_3 = 3
|
|
};
|
|
|
|
/* Configurations of clocks (transmit, receive or sample rate generator) */
|
|
enum msp_edge {
|
|
MSP_FALLING_EDGE = 0,
|
|
MSP_RISING_EDGE = 1,
|
|
};
|
|
|
|
enum msp_hws {
|
|
MSP_SWAP_NONE = 0,
|
|
MSP_SWAP_BYTE_PER_WORD = 1,
|
|
MSP_SWAP_BYTE_PER_HALF_WORD = 2,
|
|
MSP_SWAP_HALF_WORD_PER_WORD = 3
|
|
};
|
|
|
|
enum msp_compress_mode {
|
|
MSP_COMPRESS_MODE_LINEAR = 0,
|
|
MSP_COMPRESS_MODE_MU_LAW = 2,
|
|
MSP_COMPRESS_MODE_A_LAW = 3
|
|
};
|
|
|
|
enum msp_spi_burst_mode {
|
|
MSP_SPI_BURST_MODE_DISABLE = 0,
|
|
MSP_SPI_BURST_MODE_ENABLE = 1
|
|
};
|
|
|
|
enum msp_expand_mode {
|
|
MSP_EXPAND_MODE_LINEAR = 0,
|
|
MSP_EXPAND_MODE_LINEAR_SIGNED = 1,
|
|
MSP_EXPAND_MODE_MU_LAW = 2,
|
|
MSP_EXPAND_MODE_A_LAW = 3
|
|
};
|
|
|
|
#define MSP_FRAME_PERIOD_IN_MONO_MODE 256
|
|
#define MSP_FRAME_PERIOD_IN_STEREO_MODE 32
|
|
#define MSP_FRAME_WIDTH_IN_STEREO_MODE 16
|
|
|
|
enum msp_protocol {
|
|
MSP_I2S_PROTOCOL,
|
|
MSP_PCM_PROTOCOL,
|
|
MSP_PCM_COMPAND_PROTOCOL,
|
|
MSP_INVALID_PROTOCOL
|
|
};
|
|
|
|
/*
|
|
* No of registers to backup during
|
|
* suspend resume
|
|
*/
|
|
#define MAX_MSP_BACKUP_REGS 36
|
|
|
|
enum enum_i2s_controller {
|
|
MSP_0_I2S_CONTROLLER = 0,
|
|
MSP_1_I2S_CONTROLLER,
|
|
MSP_2_I2S_CONTROLLER,
|
|
MSP_3_I2S_CONTROLLER,
|
|
};
|
|
|
|
enum i2s_direction_t {
|
|
MSP_DIR_TX = 0x01,
|
|
MSP_DIR_RX = 0x02,
|
|
};
|
|
|
|
enum msp_data_size {
|
|
MSP_DATA_BITS_DEFAULT = -1,
|
|
MSP_DATA_BITS_8 = 0x00,
|
|
MSP_DATA_BITS_10,
|
|
MSP_DATA_BITS_12,
|
|
MSP_DATA_BITS_14,
|
|
MSP_DATA_BITS_16,
|
|
MSP_DATA_BITS_20,
|
|
MSP_DATA_BITS_24,
|
|
MSP_DATA_BITS_32,
|
|
};
|
|
|
|
enum msp_state {
|
|
MSP_STATE_IDLE = 0,
|
|
MSP_STATE_CONFIGURED = 1,
|
|
MSP_STATE_RUNNING = 2,
|
|
};
|
|
|
|
enum msp_rx_comparison_enable_mode {
|
|
MSP_COMPARISON_DISABLED = 0,
|
|
MSP_COMPARISON_NONEQUAL_ENABLED = 2,
|
|
MSP_COMPARISON_EQUAL_ENABLED = 3
|
|
};
|
|
|
|
struct msp_multichannel_config {
|
|
bool rx_multichannel_enable;
|
|
bool tx_multichannel_enable;
|
|
enum msp_rx_comparison_enable_mode rx_comparison_enable_mode;
|
|
u8 padding;
|
|
u32 comparison_value;
|
|
u32 comparison_mask;
|
|
u32 rx_channel_0_enable;
|
|
u32 rx_channel_1_enable;
|
|
u32 rx_channel_2_enable;
|
|
u32 rx_channel_3_enable;
|
|
u32 tx_channel_0_enable;
|
|
u32 tx_channel_1_enable;
|
|
u32 tx_channel_2_enable;
|
|
u32 tx_channel_3_enable;
|
|
};
|
|
|
|
struct msp_protdesc {
|
|
u32 rx_phase_mode;
|
|
u32 tx_phase_mode;
|
|
u32 rx_phase2_start_mode;
|
|
u32 tx_phase2_start_mode;
|
|
u32 rx_byte_order;
|
|
u32 tx_byte_order;
|
|
u32 rx_frame_len_1;
|
|
u32 rx_frame_len_2;
|
|
u32 tx_frame_len_1;
|
|
u32 tx_frame_len_2;
|
|
u32 rx_elem_len_1;
|
|
u32 rx_elem_len_2;
|
|
u32 tx_elem_len_1;
|
|
u32 tx_elem_len_2;
|
|
u32 rx_data_delay;
|
|
u32 tx_data_delay;
|
|
u32 rx_clk_pol;
|
|
u32 tx_clk_pol;
|
|
u32 rx_fsync_pol;
|
|
u32 tx_fsync_pol;
|
|
u32 rx_half_word_swap;
|
|
u32 tx_half_word_swap;
|
|
u32 compression_mode;
|
|
u32 expansion_mode;
|
|
u32 frame_sync_ignore;
|
|
u32 frame_period;
|
|
u32 frame_width;
|
|
u32 clocks_per_frame;
|
|
};
|
|
|
|
struct i2s_message {
|
|
enum i2s_direction_t i2s_direction;
|
|
void *txdata;
|
|
void *rxdata;
|
|
size_t txbytes;
|
|
size_t rxbytes;
|
|
int dma_flag;
|
|
int tx_offset;
|
|
int rx_offset;
|
|
bool cyclic_dma;
|
|
dma_addr_t buf_addr;
|
|
size_t buf_len;
|
|
size_t period_len;
|
|
};
|
|
|
|
struct i2s_controller {
|
|
struct module *owner;
|
|
unsigned int id;
|
|
unsigned int class;
|
|
const struct i2s_algorithm *algo; /* the algorithm to access the bus */
|
|
void *data;
|
|
struct mutex bus_lock;
|
|
struct device dev; /* the controller device */
|
|
char name[48];
|
|
};
|
|
|
|
struct ux500_msp_config {
|
|
unsigned int f_inputclk;
|
|
unsigned int rx_clk_sel;
|
|
unsigned int tx_clk_sel;
|
|
unsigned int srg_clk_sel;
|
|
unsigned int rx_fsync_pol;
|
|
unsigned int tx_fsync_pol;
|
|
unsigned int rx_fsync_sel;
|
|
unsigned int tx_fsync_sel;
|
|
unsigned int rx_fifo_config;
|
|
unsigned int tx_fifo_config;
|
|
unsigned int spi_clk_mode;
|
|
unsigned int spi_burst_mode;
|
|
unsigned int loopback_enable;
|
|
unsigned int tx_data_enable;
|
|
unsigned int default_protdesc;
|
|
struct msp_protdesc protdesc;
|
|
int multichannel_configured;
|
|
struct msp_multichannel_config multichannel_config;
|
|
unsigned int direction;
|
|
unsigned int protocol;
|
|
unsigned int frame_freq;
|
|
unsigned int frame_size;
|
|
enum msp_data_size data_size;
|
|
unsigned int def_elem_len;
|
|
unsigned int iodelay;
|
|
void (*handler) (void *data);
|
|
void *tx_callback_data;
|
|
void *rx_callback_data;
|
|
};
|
|
|
|
struct ux500_msp {
|
|
enum enum_i2s_controller id;
|
|
void __iomem *registers;
|
|
struct device *dev;
|
|
struct i2s_controller *i2s_cont;
|
|
struct stedma40_chan_cfg *dma_cfg_rx;
|
|
struct stedma40_chan_cfg *dma_cfg_tx;
|
|
struct dma_chan *tx_pipeid;
|
|
struct dma_chan *rx_pipeid;
|
|
enum msp_state msp_state;
|
|
int (*transfer) (struct ux500_msp *msp, struct i2s_message *message);
|
|
struct timer_list notify_timer;
|
|
int def_elem_len;
|
|
unsigned int dir_busy;
|
|
int loopback_enable;
|
|
u32 backup_regs[MAX_MSP_BACKUP_REGS];
|
|
unsigned int f_bitclk;
|
|
/* Pin modes */
|
|
struct pinctrl *pinctrl_p;
|
|
struct pinctrl_state *pinctrl_def;
|
|
struct pinctrl_state *pinctrl_sleep;
|
|
/* Reference Count */
|
|
int pinctrl_rxtx_ref;
|
|
};
|
|
|
|
struct ux500_msp_dma_params {
|
|
unsigned int data_size;
|
|
struct stedma40_chan_cfg *dma_cfg;
|
|
};
|
|
|
|
int ux500_msp_i2s_init_msp(struct platform_device *pdev,
|
|
struct ux500_msp **msp_p,
|
|
struct msp_i2s_platform_data *platform_data);
|
|
void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev,
|
|
struct ux500_msp *msp);
|
|
int ux500_msp_i2s_open(struct ux500_msp *msp, struct ux500_msp_config *config);
|
|
int ux500_msp_i2s_close(struct ux500_msp *msp,
|
|
unsigned int dir);
|
|
int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd,
|
|
int direction);
|
|
|
|
#endif
|