kernel-fxtec-pro1x/drivers/net/ibm_newemac/tah.h
David Gibson 1d3bb99648 Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs.  The
same ASIC is also found in the Axon bridge chip.  This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.

This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac).  The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).

This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging.  Specifically:
	- Should be adjusted to properly use the dma mapping API.
Axon needs this.
	- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices.  The dependencies here between
EMAC, MAL, ZMII etc. make this complicated.  At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:51:52 -07:00

90 lines
2.2 KiB
C

/*
* drivers/net/ibm_newemac/tah.h
*
* Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
*
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
* Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __IBM_NEWEMAC_TAH_H
#define __IBM_NEWEMAC_TAH_H
/* TAH */
struct tah_regs {
u32 revid;
u32 pad[3];
u32 mr;
u32 ssr0;
u32 ssr1;
u32 ssr2;
u32 ssr3;
u32 ssr4;
u32 ssr5;
u32 tsr;
};
/* TAH device */
struct tah_instance {
struct tah_regs __iomem *base;
/* Only one EMAC whacks us at a time */
struct mutex lock;
/* number of EMACs using this TAH */
int users;
/* OF device instance */
struct of_device *ofdev;
};
/* TAH engine */
#define TAH_MR_CVR 0x80000000
#define TAH_MR_SR 0x40000000
#define TAH_MR_ST_256 0x01000000
#define TAH_MR_ST_512 0x02000000
#define TAH_MR_ST_768 0x03000000
#define TAH_MR_ST_1024 0x04000000
#define TAH_MR_ST_1280 0x05000000
#define TAH_MR_ST_1536 0x06000000
#define TAH_MR_TFS_16KB 0x00000000
#define TAH_MR_TFS_2KB 0x00200000
#define TAH_MR_TFS_4KB 0x00400000
#define TAH_MR_TFS_6KB 0x00600000
#define TAH_MR_TFS_8KB 0x00800000
#define TAH_MR_TFS_10KB 0x00a00000
#define TAH_MR_DTFP 0x00100000
#define TAH_MR_DIG 0x00080000
#ifdef CONFIG_IBM_NEW_EMAC_TAH
extern int tah_init(void);
extern void tah_exit(void);
extern int tah_attach(struct of_device *ofdev, int channel);
extern void tah_detach(struct of_device *ofdev, int channel);
extern void tah_reset(struct of_device *ofdev);
extern int tah_get_regs_len(struct of_device *ofdev);
extern void *tah_dump_regs(struct of_device *ofdev, void *buf);
#else
# define tah_init() 0
# define tah_exit() do { } while(0)
# define tah_attach(x,y) (-ENXIO)
# define tah_detach(x,y) do { } while(0)
# define tah_reset(x) do { } while(0)
# define tah_get_regs_len(x) 0
# define tah_dump_regs(x,buf) (buf)
#endif /* !CONFIG_IBM_NEW_EMAC_TAH */
#endif /* __IBM_NEWEMAC_TAH_H */