kernel-fxtec-pro1x/arch/x86/kernel/genapic_flat_64.c
Mike Travis e7986739a7 x86 smp: modify send_IPI_mask interface to accept cpumask_t pointers
Impact: cleanup, change parameter passing

  * Change genapic interfaces to accept cpumask_t pointers where possible.

  * Modify external callers to use cpumask_t pointers in function calls.

  * Create new send_IPI_mask_allbutself which is the same as the
    send_IPI_mask functions but removes smp_processor_id() from list.
    This removes another common need for a temporary cpumask_t variable.

  * Functions that used a temp cpumask_t variable for:

	cpumask_t allbutme = cpu_online_map;

	cpu_clear(smp_processor_id(), allbutme);
	if (!cpus_empty(allbutme))
		...

    become:

	if (!cpus_equal(cpu_online_map, cpumask_of_cpu(cpu)))
		...

  * Other minor code optimizations (like using cpus_clear instead of
    CPU_MASK_NONE, etc.)

Applies to linux-2.6.tip/master.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
2008-12-16 17:40:56 -08:00

276 lines
6.8 KiB
C

/*
* Copyright 2004 James Cleverdon, IBM.
* Subject to the GNU Public License, v.2
*
* Flat APIC subarch code.
*
* Hacked for x86-64 by James Cleverdon from i386 architecture code by
* Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
* James Cleverdon.
*/
#include <linux/errno.h>
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/hardirq.h>
#include <asm/smp.h>
#include <asm/ipi.h>
#include <asm/genapic.h>
#include <mach_apicdef.h>
#ifdef CONFIG_ACPI
#include <acpi/acpi_bus.h>
#endif
static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
return 1;
}
static const cpumask_t *flat_target_cpus(void)
{
return &cpu_online_map;
}
static void flat_vector_allocation_domain(int cpu, cpumask_t *retmask)
{
/* Careful. Some cpus do not strictly honor the set of cpus
* specified in the interrupt destination when using lowest
* priority interrupt delivery mode.
*
* In particular there was a hyperthreading cpu observed to
* deliver interrupts to the wrong hyperthread when only one
* hyperthread was specified in the interrupt desitination.
*/
*retmask = (cpumask_t) { {[0] = APIC_ALL_CPUS, } };
}
/*
* Set up the logical destination ID.
*
* Intel recommends to set DFR, LDR and TPR before enabling
* an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
* document number 292116). So here it goes...
*/
static void flat_init_apic_ldr(void)
{
unsigned long val;
unsigned long num, id;
num = smp_processor_id();
id = 1UL << num;
apic_write(APIC_DFR, APIC_DFR_FLAT);
val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
val |= SET_APIC_LOGICAL_ID(id);
apic_write(APIC_LDR, val);
}
static inline void _flat_send_IPI_mask(unsigned long mask, int vector)
{
unsigned long flags;
local_irq_save(flags);
__send_IPI_dest_field(mask, vector, APIC_DEST_LOGICAL);
local_irq_restore(flags);
}
static void flat_send_IPI_mask(const cpumask_t *cpumask, int vector)
{
unsigned long mask = cpus_addr(*cpumask)[0];
_flat_send_IPI_mask(mask, vector);
}
static void flat_send_IPI_mask_allbutself(const cpumask_t *cpumask, int vector)
{
unsigned long mask = cpus_addr(*cpumask)[0];
int cpu = smp_processor_id();
if (cpu < BITS_PER_LONG)
clear_bit(cpu, &mask);
_flat_send_IPI_mask(mask, vector);
}
static void flat_send_IPI_allbutself(int vector)
{
int cpu = smp_processor_id();
#ifdef CONFIG_HOTPLUG_CPU
int hotplug = 1;
#else
int hotplug = 0;
#endif
if (hotplug || vector == NMI_VECTOR) {
if (!cpus_equal(cpu_online_map, cpumask_of_cpu(cpu))) {
unsigned long mask = cpus_addr(cpu_online_map)[0];
if (cpu < BITS_PER_LONG)
clear_bit(cpu, &mask);
_flat_send_IPI_mask(mask, vector);
}
} else if (num_online_cpus() > 1) {
__send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL);
}
}
static void flat_send_IPI_all(int vector)
{
if (vector == NMI_VECTOR)
flat_send_IPI_mask(&cpu_online_map, vector);
else
__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
}
static unsigned int get_apic_id(unsigned long x)
{
unsigned int id;
id = (((x)>>24) & 0xFFu);
return id;
}
static unsigned long set_apic_id(unsigned int id)
{
unsigned long x;
x = ((id & 0xFFu)<<24);
return x;
}
static unsigned int read_xapic_id(void)
{
unsigned int id;
id = get_apic_id(apic_read(APIC_ID));
return id;
}
static int flat_apic_id_registered(void)
{
return physid_isset(read_xapic_id(), phys_cpu_present_map);
}
static unsigned int flat_cpu_mask_to_apicid(const cpumask_t *cpumask)
{
return cpus_addr(*cpumask)[0] & APIC_ALL_CPUS;
}
static unsigned int phys_pkg_id(int index_msb)
{
return hard_smp_processor_id() >> index_msb;
}
struct genapic apic_flat = {
.name = "flat",
.acpi_madt_oem_check = flat_acpi_madt_oem_check,
.int_delivery_mode = dest_LowestPrio,
.int_dest_mode = (APIC_DEST_LOGICAL != 0),
.target_cpus = flat_target_cpus,
.vector_allocation_domain = flat_vector_allocation_domain,
.apic_id_registered = flat_apic_id_registered,
.init_apic_ldr = flat_init_apic_ldr,
.send_IPI_all = flat_send_IPI_all,
.send_IPI_allbutself = flat_send_IPI_allbutself,
.send_IPI_mask = flat_send_IPI_mask,
.send_IPI_mask_allbutself = flat_send_IPI_mask_allbutself,
.send_IPI_self = apic_send_IPI_self,
.cpu_mask_to_apicid = flat_cpu_mask_to_apicid,
.phys_pkg_id = phys_pkg_id,
.get_apic_id = get_apic_id,
.set_apic_id = set_apic_id,
.apic_id_mask = (0xFFu<<24),
};
/*
* Physflat mode is used when there are more than 8 CPUs on a AMD system.
* We cannot use logical delivery in this case because the mask
* overflows, so use physical mode.
*/
static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
#ifdef CONFIG_ACPI
/*
* Quirk: some x86_64 machines can only use physical APIC mode
* regardless of how many processors are present (x86_64 ES7000
* is an example).
*/
if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
printk(KERN_DEBUG "system APIC only can use physical flat");
return 1;
}
#endif
return 0;
}
static const cpumask_t *physflat_target_cpus(void)
{
return &cpu_online_map;
}
static void physflat_vector_allocation_domain(int cpu, cpumask_t *retmask)
{
cpus_clear(*retmask);
cpu_set(cpu, *retmask);
}
static void physflat_send_IPI_mask(const cpumask_t *cpumask, int vector)
{
send_IPI_mask_sequence(cpumask, vector);
}
static void physflat_send_IPI_mask_allbutself(const cpumask_t *cpumask,
int vector)
{
send_IPI_mask_allbutself(cpumask, vector);
}
static void physflat_send_IPI_allbutself(int vector)
{
send_IPI_mask_allbutself(&cpu_online_map, vector);
}
static void physflat_send_IPI_all(int vector)
{
physflat_send_IPI_mask(&cpu_online_map, vector);
}
static unsigned int physflat_cpu_mask_to_apicid(const cpumask_t *cpumask)
{
int cpu;
/*
* We're using fixed IRQ delivery, can only return one phys APIC ID.
* May as well be the first.
*/
cpu = first_cpu(*cpumask);
if ((unsigned)cpu < nr_cpu_ids)
return per_cpu(x86_cpu_to_apicid, cpu);
else
return BAD_APICID;
}
struct genapic apic_physflat = {
.name = "physical flat",
.acpi_madt_oem_check = physflat_acpi_madt_oem_check,
.int_delivery_mode = dest_Fixed,
.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
.target_cpus = physflat_target_cpus,
.vector_allocation_domain = physflat_vector_allocation_domain,
.apic_id_registered = flat_apic_id_registered,
.init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/
.send_IPI_all = physflat_send_IPI_all,
.send_IPI_allbutself = physflat_send_IPI_allbutself,
.send_IPI_mask = physflat_send_IPI_mask,
.send_IPI_mask_allbutself = physflat_send_IPI_mask_allbutself,
.send_IPI_self = apic_send_IPI_self,
.cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
.phys_pkg_id = phys_pkg_id,
.get_apic_id = get_apic_id,
.set_apic_id = set_apic_id,
.apic_id_mask = (0xFFu<<24),
};