Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/isdn/sc/interrupt.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

260 lines
6.7 KiB
C
Raw Blame History

/* $Id: interrupt.c,v 1.4.8.3 2001/09/23 22:24:59 kai Exp $
*
* Copyright (C) 1996 SpellCaster Telecommunications Inc.
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
* For more information, please contact gpl-info@spellcast.com or write:
*
* SpellCaster Telecommunications Inc.
* 5621 Finch Avenue East, Unit #3
* Scarborough, Ontario Canada
* M1B 2T9
* +1 (416) 297-8565
* +1 (416) 297-6433 Facsimile
*/
#include "includes.h"
#include "hardware.h"
#include "message.h"
#include "card.h"
#include <linux/interrupt.h>
extern int indicate_status(int, int, ulong, char *);
extern void check_phystat(unsigned long);
extern int receivemessage(int, RspMessage *);
extern int sendmessage(int, unsigned int, unsigned int, unsigned int,
unsigned int, unsigned int, unsigned int, unsigned int *);
extern void rcvpkt(int, RspMessage *);
extern int cinst;
extern board *sc_adapter[];
static int get_card_from_irq(int irq)
{
int i;
for(i = 0 ; i < cinst ; i++) {
if(sc_adapter[i]->interrupt == irq)
return i;
}
return -1;
}
/*
*
*/
irqreturn_t interrupt_handler(int interrupt, void *cardptr)
{
RspMessage rcvmsg;
int channel;
int card;
card = get_card_from_irq(interrupt);
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return IRQ_NONE;
}
pr_debug("%s: Entered Interrupt handler\n",
sc_adapter[card]->devicename);
/*
* Pull all of the waiting messages off the response queue
*/
while (!receivemessage(card, &rcvmsg)) {
/*
* Push the message to the adapter structure for
* send_and_receive to snoop
*/
if(sc_adapter[card]->want_async_messages)
memcpy(&(sc_adapter[card]->async_msg),
&rcvmsg, sizeof(RspMessage));
channel = (unsigned int) rcvmsg.phy_link_no;
/*
* Trap Invalid request messages
*/
if(IS_CM_MESSAGE(rcvmsg, 0, 0, Invalid)) {
pr_debug("%s: Invalid request Message, rsp_status = %d\n",
sc_adapter[card]->devicename,
rcvmsg.rsp_status);
break;
}
/*
* Check for a linkRead message
*/
if (IS_CE_MESSAGE(rcvmsg, Lnk, 1, Read))
{
pr_debug("%s: Received packet 0x%x bytes long at 0x%lx\n",
sc_adapter[card]->devicename,
rcvmsg.msg_data.response.msg_len,
rcvmsg.msg_data.response.buff_offset);
rcvpkt(card, &rcvmsg);
continue;
}
/*
* Handle a write acknoledgement
*/
if(IS_CE_MESSAGE(rcvmsg, Lnk, 1, Write)) {
pr_debug("%s: Packet Send ACK on channel %d\n",
sc_adapter[card]->devicename,
rcvmsg.phy_link_no);
sc_adapter[card]->channel[rcvmsg.phy_link_no-1].free_sendbufs++;
continue;
}
/*
* Handle a connection message
*/
if (IS_CE_MESSAGE(rcvmsg, Phy, 1, Connect))
{
unsigned int callid;
setup_parm setup;
pr_debug("%s: Connect message: line %d: status %d: cause 0x%x\n",
sc_adapter[card]->devicename,
rcvmsg.phy_link_no,
rcvmsg.rsp_status,
rcvmsg.msg_data.byte_array[2]);
memcpy(&callid,rcvmsg.msg_data.byte_array,sizeof(int));
if(callid>=0x8000 && callid<=0xFFFF)
{
pr_debug("%s: Got Dial-Out Rsp\n",
sc_adapter[card]->devicename);
indicate_status(card, ISDN_STAT_DCONN,
(unsigned long)rcvmsg.phy_link_no-1,NULL);
}
else if(callid>=0x0000 && callid<=0x7FFF)
{
pr_debug("%s: Got Incoming Call\n",
sc_adapter[card]->devicename);
strcpy(setup.phone,&(rcvmsg.msg_data.byte_array[4]));
strcpy(setup.eazmsn,
sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn);
setup.si1 = 7;
setup.si2 = 0;
setup.plan = 0;
setup.screen = 0;
indicate_status(card, ISDN_STAT_ICALL,(unsigned long)rcvmsg.phy_link_no-1,(char *)&setup);
indicate_status(card, ISDN_STAT_DCONN,(unsigned long)rcvmsg.phy_link_no-1,NULL);
}
continue;
}
/*
* Handle a disconnection message
*/
if (IS_CE_MESSAGE(rcvmsg, Phy, 1, Disconnect))
{
pr_debug("%s: disconnect message: line %d: status %d: cause 0x%x\n",
sc_adapter[card]->devicename,
rcvmsg.phy_link_no,
rcvmsg.rsp_status,
rcvmsg.msg_data.byte_array[2]);
indicate_status(card, ISDN_STAT_BHUP,(unsigned long)rcvmsg.phy_link_no-1,NULL);
indicate_status(card, ISDN_STAT_DHUP,(unsigned long)rcvmsg.phy_link_no-1,NULL);
continue;
}
/*
* Handle a startProc engine up message
*/
if (IS_CM_MESSAGE(rcvmsg, 5, 0, MiscEngineUp)) {
pr_debug("%s: Received EngineUp message\n",
sc_adapter[card]->devicename);
sc_adapter[card]->EngineUp = 1;
sendmessage(card, CEPID,ceReqTypeCall,ceReqClass0,ceReqCallGetMyNumber,1,0,NULL);
sendmessage(card, CEPID,ceReqTypeCall,ceReqClass0,ceReqCallGetMyNumber,2,0,NULL);
init_timer(&sc_adapter[card]->stat_timer);
sc_adapter[card]->stat_timer.function = check_phystat;
sc_adapter[card]->stat_timer.data = card;
sc_adapter[card]->stat_timer.expires = jiffies + CHECKSTAT_TIME;
add_timer(&sc_adapter[card]->stat_timer);
continue;
}
/*
* Start proc response
*/
if (IS_CM_MESSAGE(rcvmsg, 2, 0, StartProc)) {
pr_debug("%s: StartProc Response Status %d\n",
sc_adapter[card]->devicename,
rcvmsg.rsp_status);
continue;
}
/*
* Handle a GetMyNumber Rsp
*/
if (IS_CE_MESSAGE(rcvmsg,Call,0,GetMyNumber)){
strcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn,rcvmsg.msg_data.byte_array);
continue;
}
/*
* PhyStatus response
*/
if(IS_CE_MESSAGE(rcvmsg, Phy, 2, Status)) {
unsigned int b1stat, b2stat;
/*
* Covert the message data to the adapter->phystat code
*/
b1stat = (unsigned int) rcvmsg.msg_data.byte_array[0];
b2stat = (unsigned int) rcvmsg.msg_data.byte_array[1];
sc_adapter[card]->nphystat = (b2stat >> 8) | b1stat; /* endian?? */
pr_debug("%s: PhyStat is 0x%2x\n",
sc_adapter[card]->devicename,
sc_adapter[card]->nphystat);
continue;
}
/*
* Handle a GetFramFormat
*/
if(IS_CE_MESSAGE(rcvmsg, Call, 0, GetFrameFormat)) {
if(rcvmsg.msg_data.byte_array[0] != HDLC_PROTO) {
unsigned int proto = HDLC_PROTO;
/*
* Set board format to HDLC if it wasn't already
*/
pr_debug("%s: current frame format: 0x%x, will change to HDLC\n",
sc_adapter[card]->devicename,
rcvmsg.msg_data.byte_array[0]);
sendmessage(card, CEPID, ceReqTypeCall,
ceReqClass0,
ceReqCallSetFrameFormat,
(unsigned char) channel +1,
1,&proto);
}
continue;
}
/*
* Hmm...
*/
pr_debug("%s: Received unhandled message (%d,%d,%d) link %d\n",
sc_adapter[card]->devicename,
rcvmsg.type, rcvmsg.class, rcvmsg.code,
rcvmsg.phy_link_no);
} /* while */
pr_debug("%s: Exiting Interrupt Handler\n",
sc_adapter[card]->devicename);
return IRQ_HANDLED;
}
Reference in a new issue View git blame Copy permalink