Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/net/wireless/iwlwifi/iwl-config.h
Johannes Berg 99cd471423 iwlwifi: add 7000 series device configuration 
Add configuration and detection code for the new
7000 series, with 7260 and 3160 devices.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-30 21:41:24 +01:00

278 lines
9.7 KiB
C
Raw Blame History

/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __IWL_CONFIG_H__
#define __IWL_CONFIG_H__
#include <linux/types.h>
#include <net/mac80211.h>
enum iwl_device_family {
IWL_DEVICE_FAMILY_UNDEFINED,
IWL_DEVICE_FAMILY_1000,
IWL_DEVICE_FAMILY_100,
IWL_DEVICE_FAMILY_2000,
IWL_DEVICE_FAMILY_2030,
IWL_DEVICE_FAMILY_105,
IWL_DEVICE_FAMILY_135,
IWL_DEVICE_FAMILY_5000,
IWL_DEVICE_FAMILY_5150,
IWL_DEVICE_FAMILY_6000,
IWL_DEVICE_FAMILY_6000i,
IWL_DEVICE_FAMILY_6005,
IWL_DEVICE_FAMILY_6030,
IWL_DEVICE_FAMILY_6050,
IWL_DEVICE_FAMILY_6150,
IWL_DEVICE_FAMILY_7000,
};
/*
* LED mode
* IWL_LED_DEFAULT: use device default
* IWL_LED_RF_STATE: turn LED on/off based on RF state
* LED ON = RF ON
* LED OFF = RF OFF
* IWL_LED_BLINK: adjust led blink rate based on blink table
* IWL_LED_DISABLE: led disabled
*/
enum iwl_led_mode {
IWL_LED_DEFAULT,
IWL_LED_RF_STATE,
IWL_LED_BLINK,
IWL_LED_DISABLE,
};
/*
* This is the threshold value of plcp error rate per 100mSecs. It is
* used to set and check for the validity of plcp_delta.
*/
#define IWL_MAX_PLCP_ERR_THRESHOLD_MIN 1
#define IWL_MAX_PLCP_ERR_THRESHOLD_DEF 50
#define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF 100
#define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF 200
#define IWL_MAX_PLCP_ERR_THRESHOLD_MAX 255
#define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE 0
/* TX queue watchdog timeouts in mSecs */
#define IWL_WATCHDOG_DISABLED 0
#define IWL_DEF_WD_TIMEOUT 2000
#define IWL_LONG_WD_TIMEOUT 10000
#define IWL_MAX_WD_TIMEOUT 120000
/* Antenna presence definitions */
#define ANT_NONE 0x0
#define ANT_A BIT(0)
#define ANT_B BIT(1)
#define ANT_C BIT(2)
#define ANT_AB (ANT_A | ANT_B)
#define ANT_AC (ANT_A | ANT_C)
#define ANT_BC (ANT_B | ANT_C)
#define ANT_ABC (ANT_A | ANT_B | ANT_C)
/*
* @max_ll_items: max number of OTP blocks
* @shadow_ram_support: shadow support for OTP memory
* @led_compensation: compensate on the led on/off time per HW according
* to the deviation to achieve the desired led frequency.
* The detail algorithm is described in iwl-led.c
* @chain_noise_num_beacons: number of beacons used to compute chain noise
* @adv_thermal_throttle: support advance thermal throttle
* @support_ct_kill_exit: support ct kill exit condition
* @plcp_delta_threshold: plcp error rate threshold used to trigger
* radio tuning when there is a high receiving plcp error rate
* @chain_noise_scale: default chain noise scale used for gain computation
* @wd_timeout: TX queues watchdog timeout
* @max_event_log_size: size of event log buffer size for ucode event logging
* @shadow_reg_enable: HW shadow register support
* @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
* @no_idle_support: do not support idle mode
*/
struct iwl_base_params {
int eeprom_size;
int num_of_queues; /* def: HW dependent */
/* for iwl_pcie_apm_init() */
u32 pll_cfg_val;
const u16 max_ll_items;
const bool shadow_ram_support;
u16 led_compensation;
bool adv_thermal_throttle;
bool support_ct_kill_exit;
u8 plcp_delta_threshold;
s32 chain_noise_scale;
unsigned int wd_timeout;
u32 max_event_log_size;
const bool shadow_reg_enable;
const bool hd_v2;
const bool no_idle_support;
};
/*
* @advanced_bt_coexist: support advanced bt coexist
* @bt_init_traffic_load: specify initial bt traffic load
* @bt_prio_boost: default bt priority boost value
* @agg_time_limit: maximum number of uSec in aggregation
* @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
*/
struct iwl_bt_params {
bool advanced_bt_coexist;
u8 bt_init_traffic_load;
u32 bt_prio_boost;
u16 agg_time_limit;
bool bt_sco_disable;
bool bt_session_2;
};
/*
* @use_rts_for_aggregation: use rts/cts protection for HT traffic
* @ht40_bands: bitmap of bands (using %IEEE80211_BAND_*) that support HT40
*/
struct iwl_ht_params {
enum ieee80211_smps_mode smps_mode;
const bool ht_greenfield_support; /* if used set to true */
bool use_rts_for_aggregation;
u8 ht40_bands;
};
/*
* information on how to parse the EEPROM
*/
#define EEPROM_REG_BAND_1_CHANNELS 0x08
#define EEPROM_REG_BAND_2_CHANNELS 0x26
#define EEPROM_REG_BAND_3_CHANNELS 0x42
#define EEPROM_REG_BAND_4_CHANNELS 0x5C
#define EEPROM_REG_BAND_5_CHANNELS 0x74
#define EEPROM_REG_BAND_24_HT40_CHANNELS 0x82
#define EEPROM_REG_BAND_52_HT40_CHANNELS 0x92
#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS 0x80
#define EEPROM_REGULATORY_BAND_NO_HT40 0
struct iwl_eeprom_params {
const u8 regulatory_bands[7];
bool enhanced_txpower;
};
/**
* struct iwl_cfg
* @name: Offical name of the device
* @fw_name_pre: Firmware filename prefix. The api version and extension
* (.ucode) will be added to filename before loading from disk. The
* filename is constructed as fw_name_pre<api>.ucode.
* @ucode_api_max: Highest version of uCode API supported by driver.
* @ucode_api_ok: oldest version of the uCode API that is OK to load
* without a warning, for use in transitions
* @ucode_api_min: Lowest version of uCode API supported by driver.
* @max_inst_size: The maximal length of the fw inst section
* @max_data_size: The maximal length of the fw data section
* @valid_tx_ant: valid transmit antenna
* @valid_rx_ant: valid receive antenna
* @nvm_ver: NVM version
* @nvm_calib_ver: NVM calibration version
* @lib: pointer to the lib ops
* @base_params: pointer to basic parameters
* @ht_params: point to ht patameters
* @bt_params: pointer to bt parameters
* @need_temp_offset_calib: need to perform temperature offset calibration
* @no_xtal_calib: some devices do not need crystal calibration data,
* don't send it to those
* @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
* @adv_pm: advance power management
* @rx_with_siso_diversity: 1x1 device with rx antenna diversity
* @internal_wimax_coex: internal wifi/wimax combo device
* @temp_offset_v2: support v2 of temperature offset calibration
*
* We enable the driver to be backward compatible wrt. hardware features.
* API differences in uCode shouldn't be handled here but through TLVs
* and/or the uCode API version instead.
*/
struct iwl_cfg {
/* params specific to an individual device within a device family */
const char *name;
const char *fw_name_pre;
const unsigned int ucode_api_max;
const unsigned int ucode_api_ok;
const unsigned int ucode_api_min;
const enum iwl_device_family device_family;
const u32 max_data_size;
const u32 max_inst_size;
u8 valid_tx_ant;
u8 valid_rx_ant;
u16 nvm_ver;
u16 nvm_calib_ver;
/* params not likely to change within a device family */
const struct iwl_base_params *base_params;
/* params likely to change within a device family */
const struct iwl_ht_params *ht_params;
const struct iwl_bt_params *bt_params;
const struct iwl_eeprom_params *eeprom_params;
const bool need_temp_offset_calib; /* if used set to true */
const bool no_xtal_calib;
enum iwl_led_mode led_mode;
const bool adv_pm;
const bool rx_with_siso_diversity;
const bool internal_wimax_coex;
const bool temp_offset_v2;
};
#endif /* __IWL_CONFIG_H__ */
Reference in a new issue View git blame Copy permalink