kernel-fxtec-pro1x/drivers/net/phy/marvell.c
Kim Phillips 895ee682db phylib: add RGMII-ID mode to the Marvell m88e1111 PHY to fix broken ucc_geth
Support for configuring RGMII-ID (RGMII with internal delay) mode on the
88e1111 and 88e1145.  Ucc_geth on MPC8360EMDS(the main user of ucc_geth)
is broken after changed to use phylib.  It is fixed by adding this
internal delay.

Also renamed 88e1111s -> 88e1111 (no references to an 88e1111s part were
found), and fixed some whitespace.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09 18:25:35 -04:00

315 lines
6.8 KiB
C

/*
* drivers/net/phy/marvell.c
*
* Driver for Marvell PHYs
*
* Author: Andy Fleming
*
* Copyright (c) 2004 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#define MII_M1011_IEVENT 0x13
#define MII_M1011_IEVENT_CLEAR 0x0000
#define MII_M1011_IMASK 0x12
#define MII_M1011_IMASK_INIT 0x6400
#define MII_M1011_IMASK_CLEAR 0x0000
#define MII_M1011_PHY_SCR 0x10
#define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060
#define MII_M1145_PHY_EXT_CR 0x14
#define MII_M1145_RGMII_RX_DELAY 0x0080
#define MII_M1145_RGMII_TX_DELAY 0x0002
#define M1145_DEV_FLAGS_RESISTANCE 0x00000001
#define MII_M1111_PHY_LED_CONTROL 0x18
#define MII_M1111_PHY_LED_DIRECT 0x4100
#define MII_M1111_PHY_LED_COMBINE 0x411c
#define MII_M1111_PHY_EXT_CR 0x14
#define MII_M1111_RX_DELAY 0x80
#define MII_M1111_TX_DELAY 0x2
#define MII_M1111_PHY_EXT_SR 0x1b
#define MII_M1111_HWCFG_MODE_MASK 0xf
#define MII_M1111_HWCFG_MODE_RGMII 0xb
MODULE_DESCRIPTION("Marvell PHY driver");
MODULE_AUTHOR("Andy Fleming");
MODULE_LICENSE("GPL");
static int marvell_ack_interrupt(struct phy_device *phydev)
{
int err;
/* Clear the interrupts by reading the reg */
err = phy_read(phydev, MII_M1011_IEVENT);
if (err < 0)
return err;
return 0;
}
static int marvell_config_intr(struct phy_device *phydev)
{
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
else
err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
return err;
}
static int marvell_config_aneg(struct phy_device *phydev)
{
int err;
/* The Marvell PHY has an errata which requires
* that certain registers get written in order
* to restart autonegotiation */
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x1f);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x200c);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x5);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x100);
if (err < 0)
return err;
err = phy_write(phydev, MII_M1011_PHY_SCR,
MII_M1011_PHY_SCR_AUTO_CROSS);
if (err < 0)
return err;
err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
MII_M1111_PHY_LED_DIRECT);
if (err < 0)
return err;
err = genphy_config_aneg(phydev);
return err;
}
static int m88e1111_config_init(struct phy_device *phydev)
{
int err;
if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
(phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)) {
int temp;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
if (temp < 0)
return temp;
temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
if (err < 0)
return err;
}
temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
if (temp < 0)
return temp;
temp &= ~(MII_M1111_HWCFG_MODE_MASK);
temp |= MII_M1111_HWCFG_MODE_RGMII;
err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
if (err < 0)
return err;
}
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err < 0)
return err;
return 0;
}
static int m88e1145_config_init(struct phy_device *phydev)
{
int err;
/* Take care of errata E0 & E1 */
err = phy_write(phydev, 0x1d, 0x001b);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x418f);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x0016);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0xa2da);
if (err < 0)
return err;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR);
if (temp < 0)
return temp;
temp |= (MII_M1145_RGMII_RX_DELAY | MII_M1145_RGMII_TX_DELAY);
err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp);
if (err < 0)
return err;
if (phydev->dev_flags & M1145_DEV_FLAGS_RESISTANCE) {
err = phy_write(phydev, 0x1d, 0x0012);
if (err < 0)
return err;
temp = phy_read(phydev, 0x1e);
if (temp < 0)
return temp;
temp &= 0xf03f;
temp |= 2 << 9; /* 36 ohm */
temp |= 2 << 6; /* 39 ohm */
err = phy_write(phydev, 0x1e, temp);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x3);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x8000);
if (err < 0)
return err;
}
}
return 0;
}
static struct phy_driver m88e1101_driver = {
.phy_id = 0x01410c60,
.phy_id_mask = 0xfffffff0,
.name = "Marvell 88E1101",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = &marvell_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.driver = {.owner = THIS_MODULE,},
};
static struct phy_driver m88e1111_driver = {
.phy_id = 0x01410cc0,
.phy_id_mask = 0xfffffff0,
.name = "Marvell 88E1111",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = &marvell_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.config_init = &m88e1111_config_init,
.driver = {.owner = THIS_MODULE,},
};
static struct phy_driver m88e1145_driver = {
.phy_id = 0x01410cd0,
.phy_id_mask = 0xfffffff0,
.name = "Marvell 88E1145",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &m88e1145_config_init,
.config_aneg = &marvell_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.driver = {.owner = THIS_MODULE,},
};
static int __init marvell_init(void)
{
int ret;
ret = phy_driver_register(&m88e1101_driver);
if (ret)
return ret;
ret = phy_driver_register(&m88e1111_driver);
if (ret)
goto err1111;
ret = phy_driver_register(&m88e1145_driver);
if (ret)
goto err1145;
return 0;
err1145:
phy_driver_unregister(&m88e1111_driver);
err1111:
phy_driver_unregister(&m88e1101_driver);
return ret;
}
static void __exit marvell_exit(void)
{
phy_driver_unregister(&m88e1101_driver);
phy_driver_unregister(&m88e1111_driver);
phy_driver_unregister(&m88e1145_driver);
}
module_init(marvell_init);
module_exit(marvell_exit);