kernel-fxtec-pro1x/arch/i386/pci
Bernhard Kaindl 8c4b2cf9af [PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fix
"In some cases, especially on modern laptops with a lot of PCI and cardbus
bridges, we're unable to assign correct secondary/subordinate bus numbers
to all cardbus bridges due to BIOS limitations unless we are using
"pci=assign-busses" boot option." -- Ivan Kokshaysky (from a patch comment)

Without it, Cardbus cards inserted are never seen by PCI because the parent
PCI-PCI Bridge of the Cardbus bridge will not pass and translate Type 1 PCI
configuration cycles correctly and the system will fail to find and
initialise the PCI devices in the system.

Reference: PCI-PCI Bridges: PCI Configuration Cycles and PCI Bus Numbering:
http://www.science.unitn.it/~fiorella/guidelinux/tlk/node72.html

The reason for this is that:
 ``All PCI busses located behind a PCI-PCI bridge must reside between the
secondary bus number and the subordinate bus number (inclusive).''

"pci=assign-busses" makes pcibios_assign_all_busses return 1 and this
turns on PCI renumbering during PCI probing.

Alan suggested to use DMI automatically set assign-busses on problem systems.

The only question for me was where to put it.  I put it directly before
scanning PCI bus into pcibios_scan_root() because it's called from legacy,
acpi and numa and so it can be one place for all systems and configurations
which may need it.

AMD64 Laptops are also affected and fixed by assign-busses, and the code is
also incuded from arch/x86_64/pci/ that place will also work for x86_64
kernels, I only ifdef'-ed the x86-only Laptop in this example.

Affected and known or assumed to be fixed with it are (found by googling):

* ASUS Z71V and L3s
* Samsung X20
* Compaq R3140us and all Compaq R3000 series laptops with TI1620 Controller,
  also Compaq R4000 series (from a kernel.org bugreport)
* HP zv5000z (AMD64 3700+, known that fixup_parent_subordinate_busnr fixes it)
* HP zv5200z
* IBM ThinkPad 240
* An IBM ThinkPad (1.8 GHz Pentium M) debugged by Pavel Machek
  gives the correspondig message which detects the possible problem.
* MSI S260 / Medion SIM 2100 MD 95600

The patch also expands the "try pci=assign-busses" warning so testers will
help us to update the DMI table.

Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:35:14 -08:00
..
acpi.c [PATCH] PCI: arch/i386/pci/acpi.c: use for_each_pci_dev 2006-01-09 12:13:15 -08:00
common.c [PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fix 2006-03-23 14:35:14 -08:00
direct.c [PATCH] PCI: Give PCI config access initialization a defined ordering 2006-03-23 14:35:12 -08:00
fixup.c [PATCH] gx1fb: (try to) play nicer with various BIOSes 2006-01-14 18:27:14 -08:00
i386.c [PATCH] PCI: remove bogus resource collision error 2005-11-23 23:04:27 -08:00
init.c [PATCH] PCI: Give PCI config access initialization a defined ordering 2006-03-23 14:35:12 -08:00
irq.c [PATCH] PCI: irq and pci_ids: patch for Intel ICH8 2006-01-31 18:00:11 -08:00
legacy.c [PATCH] acpi bridge hotadd: ACPI based root bridge hot-add 2005-06-27 21:52:39 -07:00
Makefile [PATCH] PCI: Give PCI config access initialization a defined ordering 2006-03-23 14:35:12 -08:00
mmconfig.c [PATCH] PCI: Give PCI config access initialization a defined ordering 2006-03-23 14:35:12 -08:00
numa.c [PATCH] acpi bridge hotadd: ACPI based root bridge hot-add 2005-06-27 21:52:39 -07:00
pcbios.c [PATCH] PCI: Give PCI config access initialization a defined ordering 2006-03-23 14:35:12 -08:00
pci.h [PATCH] PCI: Give PCI config access initialization a defined ordering 2006-03-23 14:35:12 -08:00
visws.c [PATCH] visws: linkage fix 2005-08-07 10:00:38 -07:00