86cf635a31
Most Maxim PMIC regulator drivers are for sub-devices of Multi-Function Devices with drivers under drivers/mfd. But for many of these, the same object file name was used for both the MFD and the regulator drivers. Having 2 different drivers with the same name causes a lot of confusion to Kbuild, specially if these are built as module since only one module will be installed and also exported symbols will be undefined due being overwritten by the other module during modpost. For example, it fixes the following issue when both drivers are module: $ make M=drivers/regulator/ ... CC [M] drivers/regulator//max14577.o Building modules, stage 2. MODPOST 1 modules WARNING: "maxim_charger_calc_reg_current" [drivers/regulator//max14577.ko] undefined! WARNING: "maxim_charger_currents" [drivers/regulator//max14577.ko] undefined! Reported-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
318 lines
9.2 KiB
C
318 lines
9.2 KiB
C
/*
|
|
* max77693.c - Regulator driver for the Maxim 77693 and 77843
|
|
*
|
|
* Copyright (C) 2013-2015 Samsung Electronics
|
|
* Jonghwa Lee <jonghwa3.lee@samsung.com>
|
|
* Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* This driver is based on max77686.c
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/export.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/mfd/max77693.h>
|
|
#include <linux/mfd/max77693-common.h>
|
|
#include <linux/mfd/max77693-private.h>
|
|
#include <linux/mfd/max77843-private.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/*
|
|
* ID for MAX77843 regulators.
|
|
* There is no need for such for MAX77693.
|
|
*/
|
|
enum max77843_regulator_type {
|
|
MAX77843_SAFEOUT1 = 0,
|
|
MAX77843_SAFEOUT2,
|
|
MAX77843_CHARGER,
|
|
|
|
MAX77843_NUM,
|
|
};
|
|
|
|
/* Register differences between chargers: MAX77693 and MAX77843 */
|
|
struct chg_reg_data {
|
|
unsigned int linear_reg;
|
|
unsigned int linear_mask;
|
|
unsigned int uA_step;
|
|
unsigned int min_sel;
|
|
};
|
|
|
|
/*
|
|
* MAX77693 CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA
|
|
* 0x00, 0x01, 0x2, 0x03 = 60 mA
|
|
* 0x04 ~ 0x7E = (60 + (X - 3) * 20) mA
|
|
* Actually for MAX77693 the driver manipulates the maximum input current,
|
|
* not the fast charge current (output). This should be fixed.
|
|
*
|
|
* On MAX77843 the calculation formula is the same (except values).
|
|
* Fortunately it properly manipulates the fast charge current.
|
|
*/
|
|
static int max77693_chg_get_current_limit(struct regulator_dev *rdev)
|
|
{
|
|
const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev);
|
|
unsigned int chg_min_uA = rdev->constraints->min_uA;
|
|
unsigned int chg_max_uA = rdev->constraints->max_uA;
|
|
unsigned int reg, sel;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(rdev->regmap, reg_data->linear_reg, ®);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
sel = reg & reg_data->linear_mask;
|
|
|
|
/* the first four codes for charger current are all 60mA */
|
|
if (sel <= reg_data->min_sel)
|
|
sel = 0;
|
|
else
|
|
sel -= reg_data->min_sel;
|
|
|
|
val = chg_min_uA + reg_data->uA_step * sel;
|
|
if (val > chg_max_uA)
|
|
return -EINVAL;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int max77693_chg_set_current_limit(struct regulator_dev *rdev,
|
|
int min_uA, int max_uA)
|
|
{
|
|
const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev);
|
|
unsigned int chg_min_uA = rdev->constraints->min_uA;
|
|
int sel = 0;
|
|
|
|
while (chg_min_uA + reg_data->uA_step * sel < min_uA)
|
|
sel++;
|
|
|
|
if (chg_min_uA + reg_data->uA_step * sel > max_uA)
|
|
return -EINVAL;
|
|
|
|
/* the first four codes for charger current are all 60mA */
|
|
sel += reg_data->min_sel;
|
|
|
|
return regmap_write(rdev->regmap, reg_data->linear_reg, sel);
|
|
}
|
|
/* end of CHARGER regulator ops */
|
|
|
|
/* Returns regmap suitable for given regulator on chosen device */
|
|
static struct regmap *max77693_get_regmap(enum max77693_types type,
|
|
struct max77693_dev *max77693,
|
|
int reg_id)
|
|
{
|
|
if (type == TYPE_MAX77693)
|
|
return max77693->regmap;
|
|
|
|
/* Else: TYPE_MAX77843 */
|
|
switch (reg_id) {
|
|
case MAX77843_SAFEOUT1:
|
|
case MAX77843_SAFEOUT2:
|
|
return max77693->regmap;
|
|
case MAX77843_CHARGER:
|
|
return max77693->regmap_chg;
|
|
default:
|
|
return max77693->regmap;
|
|
}
|
|
}
|
|
|
|
static const unsigned int max77693_safeout_table[] = {
|
|
4850000,
|
|
4900000,
|
|
4950000,
|
|
3300000,
|
|
};
|
|
|
|
static struct regulator_ops max77693_safeout_ops = {
|
|
.list_voltage = regulator_list_voltage_table,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
};
|
|
|
|
static struct regulator_ops max77693_charger_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_current_limit = max77693_chg_get_current_limit,
|
|
.set_current_limit = max77693_chg_set_current_limit,
|
|
};
|
|
|
|
#define max77693_regulator_desc_esafeout(_num) { \
|
|
.name = "ESAFEOUT"#_num, \
|
|
.id = MAX77693_ESAFEOUT##_num, \
|
|
.of_match = of_match_ptr("ESAFEOUT"#_num), \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.n_voltages = 4, \
|
|
.ops = &max77693_safeout_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.volt_table = max77693_safeout_table, \
|
|
.vsel_reg = MAX77693_CHG_REG_SAFEOUT_CTRL, \
|
|
.vsel_mask = SAFEOUT_CTRL_SAFEOUT##_num##_MASK, \
|
|
.enable_reg = MAX77693_CHG_REG_SAFEOUT_CTRL, \
|
|
.enable_mask = SAFEOUT_CTRL_ENSAFEOUT##_num##_MASK , \
|
|
}
|
|
|
|
static const struct regulator_desc max77693_supported_regulators[] = {
|
|
max77693_regulator_desc_esafeout(1),
|
|
max77693_regulator_desc_esafeout(2),
|
|
{
|
|
.name = "CHARGER",
|
|
.id = MAX77693_CHARGER,
|
|
.of_match = of_match_ptr("CHARGER"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.ops = &max77693_charger_ops,
|
|
.type = REGULATOR_CURRENT,
|
|
.owner = THIS_MODULE,
|
|
.enable_reg = MAX77693_CHG_REG_CHG_CNFG_00,
|
|
.enable_mask = CHG_CNFG_00_CHG_MASK |
|
|
CHG_CNFG_00_BUCK_MASK,
|
|
.enable_val = CHG_CNFG_00_CHG_MASK | CHG_CNFG_00_BUCK_MASK,
|
|
},
|
|
};
|
|
|
|
static const struct chg_reg_data max77693_chg_reg_data = {
|
|
.linear_reg = MAX77693_CHG_REG_CHG_CNFG_09,
|
|
.linear_mask = CHG_CNFG_09_CHGIN_ILIM_MASK,
|
|
.uA_step = 20000,
|
|
.min_sel = 3,
|
|
};
|
|
|
|
#define max77843_regulator_desc_esafeout(num) { \
|
|
.name = "SAFEOUT" # num, \
|
|
.id = MAX77843_SAFEOUT ## num, \
|
|
.ops = &max77693_safeout_ops, \
|
|
.of_match = of_match_ptr("SAFEOUT" # num), \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.n_voltages = ARRAY_SIZE(max77693_safeout_table), \
|
|
.volt_table = max77693_safeout_table, \
|
|
.enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \
|
|
.enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT ## num, \
|
|
.vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \
|
|
.vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT ## num ## _MASK, \
|
|
}
|
|
|
|
static const struct regulator_desc max77843_supported_regulators[] = {
|
|
[MAX77843_SAFEOUT1] = max77843_regulator_desc_esafeout(1),
|
|
[MAX77843_SAFEOUT2] = max77843_regulator_desc_esafeout(2),
|
|
[MAX77843_CHARGER] = {
|
|
.name = "CHARGER",
|
|
.id = MAX77843_CHARGER,
|
|
.ops = &max77693_charger_ops,
|
|
.of_match = of_match_ptr("CHARGER"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.type = REGULATOR_CURRENT,
|
|
.owner = THIS_MODULE,
|
|
.enable_reg = MAX77843_CHG_REG_CHG_CNFG_00,
|
|
.enable_mask = MAX77843_CHG_MASK,
|
|
.enable_val = MAX77843_CHG_MASK,
|
|
},
|
|
};
|
|
|
|
static const struct chg_reg_data max77843_chg_reg_data = {
|
|
.linear_reg = MAX77843_CHG_REG_CHG_CNFG_02,
|
|
.linear_mask = MAX77843_CHG_FAST_CHG_CURRENT_MASK,
|
|
.uA_step = MAX77843_CHG_FAST_CHG_CURRENT_STEP,
|
|
.min_sel = 2,
|
|
};
|
|
|
|
static int max77693_pmic_probe(struct platform_device *pdev)
|
|
{
|
|
enum max77693_types type = platform_get_device_id(pdev)->driver_data;
|
|
struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent);
|
|
const struct regulator_desc *regulators;
|
|
unsigned int regulators_size;
|
|
int i;
|
|
struct regulator_config config = { };
|
|
|
|
config.dev = iodev->dev;
|
|
|
|
switch (type) {
|
|
case TYPE_MAX77693:
|
|
regulators = max77693_supported_regulators;
|
|
regulators_size = ARRAY_SIZE(max77693_supported_regulators);
|
|
config.driver_data = (void *)&max77693_chg_reg_data;
|
|
break;
|
|
case TYPE_MAX77843:
|
|
regulators = max77843_supported_regulators;
|
|
regulators_size = ARRAY_SIZE(max77843_supported_regulators);
|
|
config.driver_data = (void *)&max77843_chg_reg_data;
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "Unsupported device type: %u\n", type);
|
|
return -ENODEV;
|
|
}
|
|
|
|
for (i = 0; i < regulators_size; i++) {
|
|
struct regulator_dev *rdev;
|
|
|
|
config.regmap = max77693_get_regmap(type, iodev,
|
|
regulators[i].id);
|
|
|
|
rdev = devm_regulator_register(&pdev->dev,
|
|
®ulators[i], &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to initialize regulator-%d\n", i);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id max77693_pmic_id[] = {
|
|
{ "max77693-pmic", TYPE_MAX77693 },
|
|
{ "max77843-regulator", TYPE_MAX77843 },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(platform, max77693_pmic_id);
|
|
|
|
static struct platform_driver max77693_pmic_driver = {
|
|
.driver = {
|
|
.name = "max77693-pmic",
|
|
},
|
|
.probe = max77693_pmic_probe,
|
|
.id_table = max77693_pmic_id,
|
|
};
|
|
|
|
static int __init max77693_pmic_init(void)
|
|
{
|
|
return platform_driver_register(&max77693_pmic_driver);
|
|
}
|
|
subsys_initcall(max77693_pmic_init);
|
|
|
|
static void __exit max77693_pmic_cleanup(void)
|
|
{
|
|
platform_driver_unregister(&max77693_pmic_driver);
|
|
}
|
|
module_exit(max77693_pmic_cleanup);
|
|
|
|
MODULE_DESCRIPTION("MAXIM 77693/77843 regulator driver");
|
|
MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
|
|
MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski.k@gmail.com>");
|
|
MODULE_LICENSE("GPL");
|