1603b5aca4
This is a big irq cleanup patch. * Use set_irq_chip() to register irq_chip. * Initialize .mask, .unmask, .mask_ack field. Functions for these method are already exist in most case. * Do not initialize .startup, .shutdown, .enable, .disable fields if default routines provided by irq_chip_set_defaults() were suitable. * Remove redundant irq_desc initializations. * Remove unnecessary local_irq_save/local_irq_restore, spin_lock. With this cleanup, it would be easy to switch to slightly lightwait irq flow handlers (handle_level_irq(), etc.) instead of __do_IRQ(). Though whole this patch is quite large, changes in each irq_chip are not quite simple. Please review and test on your platform. Thanks. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
509 lines
14 KiB
C
509 lines
14 KiB
C
/*
|
|
* Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/linkage.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/kernel_stat.h>
|
|
|
|
#include <asm/errno.h>
|
|
#include <asm/irq_regs.h>
|
|
#include <asm/signal.h>
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/sibyte/bcm1480_regs.h>
|
|
#include <asm/sibyte/bcm1480_int.h>
|
|
#include <asm/sibyte/bcm1480_scd.h>
|
|
|
|
#include <asm/sibyte/sb1250_uart.h>
|
|
#include <asm/sibyte/sb1250.h>
|
|
|
|
/*
|
|
* These are the routines that handle all the low level interrupt stuff.
|
|
* Actions handled here are: initialization of the interrupt map, requesting of
|
|
* interrupt lines by handlers, dispatching if interrupts to handlers, probing
|
|
* for interrupt lines
|
|
*/
|
|
|
|
|
|
static void end_bcm1480_irq(unsigned int irq);
|
|
static void enable_bcm1480_irq(unsigned int irq);
|
|
static void disable_bcm1480_irq(unsigned int irq);
|
|
static void ack_bcm1480_irq(unsigned int irq);
|
|
#ifdef CONFIG_SMP
|
|
static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI
|
|
extern unsigned long ht_eoi_space;
|
|
#endif
|
|
|
|
#ifdef CONFIG_KGDB
|
|
#include <asm/gdb-stub.h>
|
|
extern void breakpoint(void);
|
|
static int kgdb_irq;
|
|
#ifdef CONFIG_GDB_CONSOLE
|
|
extern void register_gdb_console(void);
|
|
#endif
|
|
|
|
/* kgdb is on when configured. Pass "nokgdb" kernel arg to turn it off */
|
|
static int kgdb_flag = 1;
|
|
static int __init nokgdb(char *str)
|
|
{
|
|
kgdb_flag = 0;
|
|
return 1;
|
|
}
|
|
__setup("nokgdb", nokgdb);
|
|
|
|
/* Default to UART1 */
|
|
int kgdb_port = 1;
|
|
#ifdef CONFIG_SIBYTE_SB1250_DUART
|
|
extern char sb1250_duart_present[];
|
|
#endif
|
|
#endif
|
|
|
|
static struct irq_chip bcm1480_irq_type = {
|
|
.typename = "BCM1480-IMR",
|
|
.ack = ack_bcm1480_irq,
|
|
.mask = disable_bcm1480_irq,
|
|
.mask_ack = ack_bcm1480_irq,
|
|
.unmask = enable_bcm1480_irq,
|
|
.end = end_bcm1480_irq,
|
|
#ifdef CONFIG_SMP
|
|
.set_affinity = bcm1480_set_affinity
|
|
#endif
|
|
};
|
|
|
|
/* Store the CPU id (not the logical number) */
|
|
int bcm1480_irq_owner[BCM1480_NR_IRQS];
|
|
|
|
DEFINE_SPINLOCK(bcm1480_imr_lock);
|
|
|
|
void bcm1480_mask_irq(int cpu, int irq)
|
|
{
|
|
unsigned long flags;
|
|
u64 cur_ints,hl_spacing;
|
|
|
|
spin_lock_irqsave(&bcm1480_imr_lock, flags);
|
|
hl_spacing = 0;
|
|
if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
|
|
hl_spacing = BCM1480_IMR_HL_SPACING;
|
|
irq -= BCM1480_NR_IRQS_HALF;
|
|
}
|
|
cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
|
|
cur_ints |= (((u64) 1) << irq);
|
|
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
|
|
spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
|
|
}
|
|
|
|
void bcm1480_unmask_irq(int cpu, int irq)
|
|
{
|
|
unsigned long flags;
|
|
u64 cur_ints,hl_spacing;
|
|
|
|
spin_lock_irqsave(&bcm1480_imr_lock, flags);
|
|
hl_spacing = 0;
|
|
if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
|
|
hl_spacing = BCM1480_IMR_HL_SPACING;
|
|
irq -= BCM1480_NR_IRQS_HALF;
|
|
}
|
|
cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
|
|
cur_ints &= ~(((u64) 1) << irq);
|
|
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
|
|
spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
|
|
{
|
|
int i = 0, old_cpu, cpu, int_on, k;
|
|
u64 cur_ints;
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
unsigned long flags;
|
|
unsigned int irq_dirty;
|
|
|
|
i = first_cpu(mask);
|
|
if (next_cpu(i, mask) <= NR_CPUS) {
|
|
printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
|
|
return;
|
|
}
|
|
|
|
/* Convert logical CPU to physical CPU */
|
|
cpu = cpu_logical_map(i);
|
|
|
|
/* Protect against other affinity changers and IMR manipulation */
|
|
spin_lock_irqsave(&desc->lock, flags);
|
|
spin_lock(&bcm1480_imr_lock);
|
|
|
|
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
|
|
old_cpu = bcm1480_irq_owner[irq];
|
|
irq_dirty = irq;
|
|
if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
|
|
irq_dirty -= BCM1480_NR_IRQS_HALF;
|
|
}
|
|
|
|
for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */
|
|
cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
|
|
int_on = !(cur_ints & (((u64) 1) << irq_dirty));
|
|
if (int_on) {
|
|
/* If it was on, mask it */
|
|
cur_ints |= (((u64) 1) << irq_dirty);
|
|
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
|
|
}
|
|
bcm1480_irq_owner[irq] = cpu;
|
|
if (int_on) {
|
|
/* unmask for the new CPU */
|
|
cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
|
|
cur_ints &= ~(((u64) 1) << irq_dirty);
|
|
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
|
|
}
|
|
}
|
|
spin_unlock(&bcm1480_imr_lock);
|
|
spin_unlock_irqrestore(&desc->lock, flags);
|
|
}
|
|
#endif
|
|
|
|
|
|
/*****************************************************************************/
|
|
|
|
static void disable_bcm1480_irq(unsigned int irq)
|
|
{
|
|
bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
|
|
}
|
|
|
|
static void enable_bcm1480_irq(unsigned int irq)
|
|
{
|
|
bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
|
|
}
|
|
|
|
|
|
static void ack_bcm1480_irq(unsigned int irq)
|
|
{
|
|
u64 pending;
|
|
unsigned int irq_dirty;
|
|
int k;
|
|
|
|
/*
|
|
* If the interrupt was an HT interrupt, now is the time to
|
|
* clear it. NOTE: we assume the HT bridge was set up to
|
|
* deliver the interrupts to all CPUs (which makes affinity
|
|
* changing easier for us)
|
|
*/
|
|
irq_dirty = irq;
|
|
if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
|
|
irq_dirty -= BCM1480_NR_IRQS_HALF;
|
|
}
|
|
for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */
|
|
pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq],
|
|
R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING))));
|
|
pending &= ((u64)1 << (irq_dirty));
|
|
if (pending) {
|
|
#ifdef CONFIG_SMP
|
|
int i;
|
|
for (i=0; i<NR_CPUS; i++) {
|
|
/*
|
|
* Clear for all CPUs so an affinity switch
|
|
* doesn't find an old status
|
|
*/
|
|
__raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(cpu_logical_map(i),
|
|
R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
|
|
}
|
|
#else
|
|
__raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
|
|
#endif
|
|
|
|
/*
|
|
* Generate EOI. For Pass 1 parts, EOI is a nop. For
|
|
* Pass 2, the LDT world may be edge-triggered, but
|
|
* this EOI shouldn't hurt. If they are
|
|
* level-sensitive, the EOI is required.
|
|
*/
|
|
#ifdef CONFIG_PCI
|
|
if (ht_eoi_space)
|
|
*(uint32_t *)(ht_eoi_space+(irq<<16)+(7<<2)) = 0;
|
|
#endif
|
|
}
|
|
}
|
|
bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
|
|
}
|
|
|
|
|
|
static void end_bcm1480_irq(unsigned int irq)
|
|
{
|
|
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
|
|
bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
|
|
}
|
|
}
|
|
|
|
|
|
void __init init_bcm1480_irqs(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < BCM1480_NR_IRQS; i++) {
|
|
set_irq_chip(i, &bcm1480_irq_type);
|
|
bcm1480_irq_owner[i] = 0;
|
|
}
|
|
}
|
|
|
|
|
|
static irqreturn_t bcm1480_dummy_handler(int irq, void *dev_id)
|
|
{
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static struct irqaction bcm1480_dummy_action = {
|
|
.handler = bcm1480_dummy_handler,
|
|
.flags = 0,
|
|
.mask = CPU_MASK_NONE,
|
|
.name = "bcm1480-private",
|
|
.next = NULL,
|
|
.dev_id = 0
|
|
};
|
|
|
|
int bcm1480_steal_irq(int irq)
|
|
{
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
unsigned long flags;
|
|
int retval = 0;
|
|
|
|
if (irq >= BCM1480_NR_IRQS)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&desc->lock,flags);
|
|
/* Don't allow sharing at all for these */
|
|
if (desc->action != NULL)
|
|
retval = -EBUSY;
|
|
else {
|
|
desc->action = &bcm1480_dummy_action;
|
|
desc->depth = 0;
|
|
}
|
|
spin_unlock_irqrestore(&desc->lock,flags);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* init_IRQ is called early in the boot sequence from init/main.c. It
|
|
* is responsible for setting up the interrupt mapper and installing the
|
|
* handler that will be responsible for dispatching interrupts to the
|
|
* "right" place.
|
|
*/
|
|
/*
|
|
* For now, map all interrupts to IP[2]. We could save
|
|
* some cycles by parceling out system interrupts to different
|
|
* IP lines, but keep it simple for bringup. We'll also direct
|
|
* all interrupts to a single CPU; we should probably route
|
|
* PCI and LDT to one cpu and everything else to the other
|
|
* to balance the load a bit.
|
|
*
|
|
* On the second cpu, everything is set to IP5, which is
|
|
* ignored, EXCEPT the mailbox interrupt. That one is
|
|
* set to IP[2] so it is handled. This is needed so we
|
|
* can do cross-cpu function calls, as requred by SMP
|
|
*/
|
|
|
|
#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
|
|
#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
|
|
#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
|
|
#define IMR_IP5_VAL K_BCM1480_INT_MAP_I3
|
|
#define IMR_IP6_VAL K_BCM1480_INT_MAP_I4
|
|
|
|
void __init arch_init_irq(void)
|
|
{
|
|
|
|
unsigned int i, cpu;
|
|
u64 tmp;
|
|
unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
|
|
STATUSF_IP1 | STATUSF_IP0;
|
|
|
|
/* Default everything to IP2 */
|
|
/* Start with _high registers which has no bit 0 interrupt source */
|
|
for (i = 1; i < BCM1480_NR_IRQS_HALF; i++) { /* was I0 */
|
|
for (cpu = 0; cpu < 4; cpu++) {
|
|
__raw_writeq(IMR_IP2_VAL,
|
|
IOADDR(A_BCM1480_IMR_REGISTER(cpu,
|
|
R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (i << 3)));
|
|
}
|
|
}
|
|
|
|
/* Now do _low registers */
|
|
for (i = 0; i < BCM1480_NR_IRQS_HALF; i++) {
|
|
for (cpu = 0; cpu < 4; cpu++) {
|
|
__raw_writeq(IMR_IP2_VAL,
|
|
IOADDR(A_BCM1480_IMR_REGISTER(cpu,
|
|
R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + (i << 3)));
|
|
}
|
|
}
|
|
|
|
init_bcm1480_irqs();
|
|
|
|
/*
|
|
* Map the high 16 bits of mailbox_0 registers to IP[3], for
|
|
* inter-cpu messages
|
|
*/
|
|
/* Was I1 */
|
|
for (cpu = 0; cpu < 4; cpu++) {
|
|
__raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
|
|
(K_BCM1480_INT_MBOX_0_0 << 3)));
|
|
}
|
|
|
|
|
|
/* Clear the mailboxes. The firmware may leave them dirty */
|
|
for (cpu = 0; cpu < 4; cpu++) {
|
|
__raw_writeq(0xffffffffffffffffULL,
|
|
IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU)));
|
|
__raw_writeq(0xffffffffffffffffULL,
|
|
IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_1_CLR_CPU)));
|
|
}
|
|
|
|
|
|
/* Mask everything except the high 16 bit of mailbox_0 registers for all cpus */
|
|
tmp = ~((u64) 0) ^ ( (((u64) 1) << K_BCM1480_INT_MBOX_0_0));
|
|
for (cpu = 0; cpu < 4; cpu++) {
|
|
__raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_H)));
|
|
}
|
|
tmp = ~((u64) 0);
|
|
for (cpu = 0; cpu < 4; cpu++) {
|
|
__raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L)));
|
|
}
|
|
|
|
bcm1480_steal_irq(K_BCM1480_INT_MBOX_0_0);
|
|
|
|
/*
|
|
* Note that the timer interrupts are also mapped, but this is
|
|
* done in bcm1480_time_init(). Also, the profiling driver
|
|
* does its own management of IP7.
|
|
*/
|
|
|
|
#ifdef CONFIG_KGDB
|
|
imask |= STATUSF_IP6;
|
|
#endif
|
|
/* Enable necessary IPs, disable the rest */
|
|
change_c0_status(ST0_IM, imask);
|
|
|
|
#ifdef CONFIG_KGDB
|
|
if (kgdb_flag) {
|
|
kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
|
|
|
|
#ifdef CONFIG_SIBYTE_SB1250_DUART
|
|
sb1250_duart_present[kgdb_port] = 0;
|
|
#endif
|
|
/* Setup uart 1 settings, mapper */
|
|
/* QQQ FIXME */
|
|
__raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port));
|
|
|
|
bcm1480_steal_irq(kgdb_irq);
|
|
__raw_writeq(IMR_IP6_VAL,
|
|
IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
|
|
(kgdb_irq<<3));
|
|
bcm1480_unmask_irq(0, kgdb_irq);
|
|
|
|
#ifdef CONFIG_GDB_CONSOLE
|
|
register_gdb_console();
|
|
#endif
|
|
prom_printf("Waiting for GDB on UART port %d\n", kgdb_port);
|
|
set_debug_traps();
|
|
breakpoint();
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_KGDB
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
|
|
#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
|
|
|
|
static void bcm1480_kgdb_interrupt(void)
|
|
{
|
|
/*
|
|
* Clear break-change status (allow some time for the remote
|
|
* host to stop the break, since we would see another
|
|
* interrupt on the end-of-break too)
|
|
*/
|
|
kstat.irqs[smp_processor_id()][kgdb_irq]++;
|
|
mdelay(500);
|
|
duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
|
|
M_DUART_RX_EN | M_DUART_TX_EN);
|
|
set_async_breakpoint(&get_irq_regs()->cp0_epc);
|
|
}
|
|
|
|
#endif /* CONFIG_KGDB */
|
|
|
|
extern void bcm1480_timer_interrupt(void);
|
|
extern void bcm1480_mailbox_interrupt(void);
|
|
|
|
asmlinkage void plat_irq_dispatch(void)
|
|
{
|
|
unsigned int pending;
|
|
|
|
#ifdef CONFIG_SIBYTE_BCM1480_PROF
|
|
/* Set compare to count to silence count/compare timer interrupts */
|
|
write_c0_compare(read_c0_count());
|
|
#endif
|
|
|
|
pending = read_c0_cause() & read_c0_status();
|
|
|
|
#ifdef CONFIG_SIBYTE_BCM1480_PROF
|
|
if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */
|
|
sbprof_cpu_intr();
|
|
else
|
|
#endif
|
|
|
|
if (pending & CAUSEF_IP4)
|
|
bcm1480_timer_interrupt();
|
|
|
|
#ifdef CONFIG_SMP
|
|
else if (pending & CAUSEF_IP3)
|
|
bcm1480_mailbox_interrupt();
|
|
#endif
|
|
|
|
#ifdef CONFIG_KGDB
|
|
else if (pending & CAUSEF_IP6)
|
|
bcm1480_kgdb_interrupt(); /* KGDB (uart 1) */
|
|
#endif
|
|
|
|
else if (pending & CAUSEF_IP2) {
|
|
unsigned long long mask_h, mask_l;
|
|
unsigned long base;
|
|
|
|
/*
|
|
* Default...we've hit an IP[2] interrupt, which means we've
|
|
* got to check the 1480 interrupt registers to figure out what
|
|
* to do. Need to detect which CPU we're on, now that
|
|
* smp_affinity is supported.
|
|
*/
|
|
base = A_BCM1480_IMR_MAPPER(smp_processor_id());
|
|
mask_h = __raw_readq(
|
|
IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H));
|
|
mask_l = __raw_readq(
|
|
IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L));
|
|
|
|
if (mask_h) {
|
|
if (mask_h ^ 1)
|
|
do_IRQ(fls64(mask_h) - 1);
|
|
else
|
|
do_IRQ(63 + fls64(mask_l));
|
|
}
|
|
}
|
|
}
|