2197 lines
63 KiB
C
2197 lines
63 KiB
C
/*
|
|
* Copyright (c) 1997-2000 LAN Media Corporation (LMC)
|
|
* All rights reserved. www.lanmedia.com
|
|
*
|
|
* This code is written by:
|
|
* Andrew Stanley-Jones (asj@cban.com)
|
|
* Rob Braun (bbraun@vix.com),
|
|
* Michael Graff (explorer@vix.com) and
|
|
* Matt Thomas (matt@3am-software.com).
|
|
*
|
|
* With Help By:
|
|
* David Boggs
|
|
* Ron Crane
|
|
* Alan Cox
|
|
*
|
|
* This software may be used and distributed according to the terms
|
|
* of the GNU General Public License version 2, incorporated herein by reference.
|
|
*
|
|
* Driver for the LanMedia LMC5200, LMC5245, LMC1000, LMC1200 cards.
|
|
*
|
|
* To control link specific options lmcctl is required.
|
|
* It can be obtained from ftp.lanmedia.com.
|
|
*
|
|
* Linux driver notes:
|
|
* Linux uses the device struct lmc_private to pass private information
|
|
* arround.
|
|
*
|
|
* The initialization portion of this driver (the lmc_reset() and the
|
|
* lmc_dec_reset() functions, as well as the led controls and the
|
|
* lmc_initcsrs() functions.
|
|
*
|
|
* The watchdog function runs every second and checks to see if
|
|
* we still have link, and that the timing source is what we expected
|
|
* it to be. If link is lost, the interface is marked down, and
|
|
* we no longer can transmit.
|
|
*
|
|
*/
|
|
|
|
/* $Id: lmc_main.c,v 1.36 2000/04/11 05:25:25 asj Exp $ */
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/in.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/inet.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <net/syncppp.h>
|
|
|
|
#include <asm/processor.h> /* Processor type for cache alignment. */
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/uaccess.h>
|
|
//#include <asm/spinlock.h>
|
|
|
|
#define DRIVER_MAJOR_VERSION 1
|
|
#define DRIVER_MINOR_VERSION 34
|
|
#define DRIVER_SUB_VERSION 0
|
|
|
|
#define DRIVER_VERSION ((DRIVER_MAJOR_VERSION << 8) + DRIVER_MINOR_VERSION)
|
|
|
|
#include "lmc.h"
|
|
#include "lmc_var.h"
|
|
#include "lmc_ioctl.h"
|
|
#include "lmc_debug.h"
|
|
#include "lmc_proto.h"
|
|
|
|
static int lmc_first_load = 0;
|
|
|
|
static int LMC_PKT_BUF_SZ = 1542;
|
|
|
|
static struct pci_device_id lmc_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
|
|
PCI_VENDOR_ID_LMC, PCI_ANY_ID },
|
|
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
|
|
PCI_ANY_ID, PCI_VENDOR_ID_LMC },
|
|
{ 0 }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, lmc_pci_tbl);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
static int lmc_rx (struct net_device *dev);
|
|
static int lmc_open(struct net_device *dev);
|
|
static int lmc_close(struct net_device *dev);
|
|
static struct net_device_stats *lmc_get_stats(struct net_device *dev);
|
|
static irqreturn_t lmc_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
|
|
static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, size_t csr_size);
|
|
static void lmc_softreset(lmc_softc_t * const);
|
|
static void lmc_running_reset(struct net_device *dev);
|
|
static int lmc_ifdown(struct net_device * const);
|
|
static void lmc_watchdog(unsigned long data);
|
|
static void lmc_reset(lmc_softc_t * const sc);
|
|
static void lmc_dec_reset(lmc_softc_t * const sc);
|
|
static void lmc_driver_timeout(struct net_device *dev);
|
|
|
|
/*
|
|
* linux reserves 16 device specific IOCTLs. We call them
|
|
* LMCIOC* to control various bits of our world.
|
|
*/
|
|
int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
|
|
{
|
|
lmc_softc_t *sc;
|
|
lmc_ctl_t ctl;
|
|
int ret;
|
|
u_int16_t regVal;
|
|
unsigned long flags;
|
|
|
|
struct sppp *sp;
|
|
|
|
ret = -EOPNOTSUPP;
|
|
|
|
sc = dev->priv;
|
|
|
|
lmc_trace(dev, "lmc_ioctl in");
|
|
|
|
/*
|
|
* Most functions mess with the structure
|
|
* Disable interrupts while we do the polling
|
|
*/
|
|
spin_lock_irqsave(&sc->lmc_lock, flags);
|
|
|
|
switch (cmd) {
|
|
/*
|
|
* Return current driver state. Since we keep this up
|
|
* To date internally, just copy this out to the user.
|
|
*/
|
|
case LMCIOCGINFO: /*fold01*/
|
|
if (copy_to_user(ifr->ifr_data, &sc->ictl, sizeof (lmc_ctl_t)))
|
|
return -EFAULT;
|
|
ret = 0;
|
|
break;
|
|
|
|
case LMCIOCSINFO: /*fold01*/
|
|
sp = &((struct ppp_device *) dev)->sppp;
|
|
if (!capable(CAP_NET_ADMIN)) {
|
|
ret = -EPERM;
|
|
break;
|
|
}
|
|
|
|
if(dev->flags & IFF_UP){
|
|
ret = -EBUSY;
|
|
break;
|
|
}
|
|
|
|
if (copy_from_user(&ctl, ifr->ifr_data, sizeof (lmc_ctl_t)))
|
|
return -EFAULT;
|
|
|
|
sc->lmc_media->set_status (sc, &ctl);
|
|
|
|
if(ctl.crc_length != sc->ictl.crc_length) {
|
|
sc->lmc_media->set_crc_length(sc, ctl.crc_length);
|
|
if (sc->ictl.crc_length == LMC_CTL_CRC_LENGTH_16)
|
|
sc->TxDescriptControlInit |= LMC_TDES_ADD_CRC_DISABLE;
|
|
else
|
|
sc->TxDescriptControlInit &= ~LMC_TDES_ADD_CRC_DISABLE;
|
|
}
|
|
|
|
if (ctl.keepalive_onoff == LMC_CTL_OFF)
|
|
sp->pp_flags &= ~PP_KEEPALIVE; /* Turn off */
|
|
else
|
|
sp->pp_flags |= PP_KEEPALIVE; /* Turn on */
|
|
|
|
ret = 0;
|
|
break;
|
|
|
|
case LMCIOCIFTYPE: /*fold01*/
|
|
{
|
|
u_int16_t old_type = sc->if_type;
|
|
u_int16_t new_type;
|
|
|
|
if (!capable(CAP_NET_ADMIN)) {
|
|
ret = -EPERM;
|
|
break;
|
|
}
|
|
|
|
if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t)))
|
|
return -EFAULT;
|
|
|
|
|
|
if (new_type == old_type)
|
|
{
|
|
ret = 0 ;
|
|
break; /* no change */
|
|
}
|
|
|
|
lmc_proto_close(sc);
|
|
lmc_proto_detach(sc);
|
|
|
|
sc->if_type = new_type;
|
|
// lmc_proto_init(sc);
|
|
lmc_proto_attach(sc);
|
|
lmc_proto_open(sc);
|
|
|
|
ret = 0 ;
|
|
break ;
|
|
}
|
|
|
|
case LMCIOCGETXINFO: /*fold01*/
|
|
sc->lmc_xinfo.Magic0 = 0xBEEFCAFE;
|
|
|
|
sc->lmc_xinfo.PciCardType = sc->lmc_cardtype;
|
|
sc->lmc_xinfo.PciSlotNumber = 0;
|
|
sc->lmc_xinfo.DriverMajorVersion = DRIVER_MAJOR_VERSION;
|
|
sc->lmc_xinfo.DriverMinorVersion = DRIVER_MINOR_VERSION;
|
|
sc->lmc_xinfo.DriverSubVersion = DRIVER_SUB_VERSION;
|
|
sc->lmc_xinfo.XilinxRevisionNumber =
|
|
lmc_mii_readreg (sc, 0, 3) & 0xf;
|
|
sc->lmc_xinfo.MaxFrameSize = LMC_PKT_BUF_SZ;
|
|
sc->lmc_xinfo.link_status = sc->lmc_media->get_link_status (sc);
|
|
sc->lmc_xinfo.mii_reg16 = lmc_mii_readreg (sc, 0, 16);
|
|
|
|
sc->lmc_xinfo.Magic1 = 0xDEADBEEF;
|
|
|
|
if (copy_to_user(ifr->ifr_data, &sc->lmc_xinfo,
|
|
sizeof (struct lmc_xinfo)))
|
|
return -EFAULT;
|
|
ret = 0;
|
|
|
|
break;
|
|
|
|
case LMCIOCGETLMCSTATS: /*fold01*/
|
|
if (sc->lmc_cardtype == LMC_CARDTYPE_T1){
|
|
lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_LSB);
|
|
sc->stats.framingBitErrorCount +=
|
|
lmc_mii_readreg (sc, 0, 18) & 0xff;
|
|
lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_MSB);
|
|
sc->stats.framingBitErrorCount +=
|
|
(lmc_mii_readreg (sc, 0, 18) & 0xff) << 8;
|
|
lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_LSB);
|
|
sc->stats.lineCodeViolationCount +=
|
|
lmc_mii_readreg (sc, 0, 18) & 0xff;
|
|
lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_MSB);
|
|
sc->stats.lineCodeViolationCount +=
|
|
(lmc_mii_readreg (sc, 0, 18) & 0xff) << 8;
|
|
lmc_mii_writereg (sc, 0, 17, T1FRAMER_AERR);
|
|
regVal = lmc_mii_readreg (sc, 0, 18) & 0xff;
|
|
|
|
sc->stats.lossOfFrameCount +=
|
|
(regVal & T1FRAMER_LOF_MASK) >> 4;
|
|
sc->stats.changeOfFrameAlignmentCount +=
|
|
(regVal & T1FRAMER_COFA_MASK) >> 2;
|
|
sc->stats.severelyErroredFrameCount +=
|
|
regVal & T1FRAMER_SEF_MASK;
|
|
}
|
|
|
|
if (copy_to_user(ifr->ifr_data, &sc->stats,
|
|
sizeof (struct lmc_statistics)))
|
|
return -EFAULT;
|
|
|
|
ret = 0;
|
|
break;
|
|
|
|
case LMCIOCCLEARLMCSTATS: /*fold01*/
|
|
if (!capable(CAP_NET_ADMIN)){
|
|
ret = -EPERM;
|
|
break;
|
|
}
|
|
|
|
memset (&sc->stats, 0, sizeof (struct lmc_statistics));
|
|
sc->stats.check = STATCHECK;
|
|
sc->stats.version_size = (DRIVER_VERSION << 16) +
|
|
sizeof (struct lmc_statistics);
|
|
sc->stats.lmc_cardtype = sc->lmc_cardtype;
|
|
ret = 0;
|
|
break;
|
|
|
|
case LMCIOCSETCIRCUIT: /*fold01*/
|
|
if (!capable(CAP_NET_ADMIN)){
|
|
ret = -EPERM;
|
|
break;
|
|
}
|
|
|
|
if(dev->flags & IFF_UP){
|
|
ret = -EBUSY;
|
|
break;
|
|
}
|
|
|
|
if (copy_from_user(&ctl, ifr->ifr_data, sizeof (lmc_ctl_t)))
|
|
return -EFAULT;
|
|
sc->lmc_media->set_circuit_type(sc, ctl.circuit_type);
|
|
sc->ictl.circuit_type = ctl.circuit_type;
|
|
ret = 0;
|
|
|
|
break;
|
|
|
|
case LMCIOCRESET: /*fold01*/
|
|
if (!capable(CAP_NET_ADMIN)){
|
|
ret = -EPERM;
|
|
break;
|
|
}
|
|
|
|
/* Reset driver and bring back to current state */
|
|
printk (" REG16 before reset +%04x\n", lmc_mii_readreg (sc, 0, 16));
|
|
lmc_running_reset (dev);
|
|
printk (" REG16 after reset +%04x\n", lmc_mii_readreg (sc, 0, 16));
|
|
|
|
LMC_EVENT_LOG(LMC_EVENT_FORCEDRESET, LMC_CSR_READ (sc, csr_status), lmc_mii_readreg (sc, 0, 16));
|
|
|
|
ret = 0;
|
|
break;
|
|
|
|
#ifdef DEBUG
|
|
case LMCIOCDUMPEVENTLOG:
|
|
if (copy_to_user(ifr->ifr_data, &lmcEventLogIndex, sizeof (u32)))
|
|
return -EFAULT;
|
|
if (copy_to_user(ifr->ifr_data + sizeof (u32), lmcEventLogBuf, sizeof (lmcEventLogBuf)))
|
|
return -EFAULT;
|
|
|
|
ret = 0;
|
|
break;
|
|
#endif /* end ifdef _DBG_EVENTLOG */
|
|
case LMCIOCT1CONTROL: /*fold01*/
|
|
if (sc->lmc_cardtype != LMC_CARDTYPE_T1){
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
break;
|
|
case LMCIOCXILINX: /*fold01*/
|
|
{
|
|
struct lmc_xilinx_control xc; /*fold02*/
|
|
|
|
if (!capable(CAP_NET_ADMIN)){
|
|
ret = -EPERM;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Stop the xwitter whlie we restart the hardware
|
|
*/
|
|
netif_stop_queue(dev);
|
|
|
|
if (copy_from_user(&xc, ifr->ifr_data, sizeof (struct lmc_xilinx_control)))
|
|
return -EFAULT;
|
|
switch(xc.command){
|
|
case lmc_xilinx_reset: /*fold02*/
|
|
{
|
|
u16 mii;
|
|
mii = lmc_mii_readreg (sc, 0, 16);
|
|
|
|
/*
|
|
* Make all of them 0 and make input
|
|
*/
|
|
lmc_gpio_mkinput(sc, 0xff);
|
|
|
|
/*
|
|
* make the reset output
|
|
*/
|
|
lmc_gpio_mkoutput(sc, LMC_GEP_RESET);
|
|
|
|
/*
|
|
* RESET low to force configuration. This also forces
|
|
* the transmitter clock to be internal, but we expect to reset
|
|
* that later anyway.
|
|
*/
|
|
|
|
sc->lmc_gpio &= ~LMC_GEP_RESET;
|
|
LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
|
|
|
|
|
|
/*
|
|
* hold for more than 10 microseconds
|
|
*/
|
|
udelay(50);
|
|
|
|
sc->lmc_gpio |= LMC_GEP_RESET;
|
|
LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
|
|
|
|
|
|
/*
|
|
* stop driving Xilinx-related signals
|
|
*/
|
|
lmc_gpio_mkinput(sc, 0xff);
|
|
|
|
/* Reset the frammer hardware */
|
|
sc->lmc_media->set_link_status (sc, 1);
|
|
sc->lmc_media->set_status (sc, NULL);
|
|
// lmc_softreset(sc);
|
|
|
|
{
|
|
int i;
|
|
for(i = 0; i < 5; i++){
|
|
lmc_led_on(sc, LMC_DS3_LED0);
|
|
mdelay(100);
|
|
lmc_led_off(sc, LMC_DS3_LED0);
|
|
lmc_led_on(sc, LMC_DS3_LED1);
|
|
mdelay(100);
|
|
lmc_led_off(sc, LMC_DS3_LED1);
|
|
lmc_led_on(sc, LMC_DS3_LED3);
|
|
mdelay(100);
|
|
lmc_led_off(sc, LMC_DS3_LED3);
|
|
lmc_led_on(sc, LMC_DS3_LED2);
|
|
mdelay(100);
|
|
lmc_led_off(sc, LMC_DS3_LED2);
|
|
}
|
|
}
|
|
|
|
|
|
|
|
ret = 0x0;
|
|
|
|
}
|
|
|
|
break;
|
|
case lmc_xilinx_load_prom: /*fold02*/
|
|
{
|
|
u16 mii;
|
|
int timeout = 500000;
|
|
mii = lmc_mii_readreg (sc, 0, 16);
|
|
|
|
/*
|
|
* Make all of them 0 and make input
|
|
*/
|
|
lmc_gpio_mkinput(sc, 0xff);
|
|
|
|
/*
|
|
* make the reset output
|
|
*/
|
|
lmc_gpio_mkoutput(sc, LMC_GEP_DP | LMC_GEP_RESET);
|
|
|
|
/*
|
|
* RESET low to force configuration. This also forces
|
|
* the transmitter clock to be internal, but we expect to reset
|
|
* that later anyway.
|
|
*/
|
|
|
|
sc->lmc_gpio &= ~(LMC_GEP_RESET | LMC_GEP_DP);
|
|
LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
|
|
|
|
|
|
/*
|
|
* hold for more than 10 microseconds
|
|
*/
|
|
udelay(50);
|
|
|
|
sc->lmc_gpio |= LMC_GEP_DP | LMC_GEP_RESET;
|
|
LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
|
|
|
|
/*
|
|
* busy wait for the chip to reset
|
|
*/
|
|
while( (LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0 &&
|
|
(timeout-- > 0))
|
|
;
|
|
|
|
|
|
/*
|
|
* stop driving Xilinx-related signals
|
|
*/
|
|
lmc_gpio_mkinput(sc, 0xff);
|
|
|
|
ret = 0x0;
|
|
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case lmc_xilinx_load: /*fold02*/
|
|
{
|
|
char *data;
|
|
int pos;
|
|
int timeout = 500000;
|
|
|
|
if(xc.data == 0x0){
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
data = kmalloc(xc.len, GFP_KERNEL);
|
|
if(data == 0x0){
|
|
printk(KERN_WARNING "%s: Failed to allocate memory for copy\n", dev->name);
|
|
ret = -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
if(copy_from_user(data, xc.data, xc.len))
|
|
{
|
|
kfree(data);
|
|
ret = -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
printk("%s: Starting load of data Len: %d at 0x%p == 0x%p\n", dev->name, xc.len, xc.data, data);
|
|
|
|
lmc_gpio_mkinput(sc, 0xff);
|
|
|
|
/*
|
|
* Clear the Xilinx and start prgramming from the DEC
|
|
*/
|
|
|
|
/*
|
|
* Set ouput as:
|
|
* Reset: 0 (active)
|
|
* DP: 0 (active)
|
|
* Mode: 1
|
|
*
|
|
*/
|
|
sc->lmc_gpio = 0x00;
|
|
sc->lmc_gpio &= ~LMC_GEP_DP;
|
|
sc->lmc_gpio &= ~LMC_GEP_RESET;
|
|
sc->lmc_gpio |= LMC_GEP_MODE;
|
|
LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
|
|
|
|
lmc_gpio_mkoutput(sc, LMC_GEP_MODE | LMC_GEP_DP | LMC_GEP_RESET);
|
|
|
|
/*
|
|
* Wait at least 10 us 20 to be safe
|
|
*/
|
|
udelay(50);
|
|
|
|
/*
|
|
* Clear reset and activate programming lines
|
|
* Reset: Input
|
|
* DP: Input
|
|
* Clock: Output
|
|
* Data: Output
|
|
* Mode: Output
|
|
*/
|
|
lmc_gpio_mkinput(sc, LMC_GEP_DP | LMC_GEP_RESET);
|
|
|
|
/*
|
|
* Set LOAD, DATA, Clock to 1
|
|
*/
|
|
sc->lmc_gpio = 0x00;
|
|
sc->lmc_gpio |= LMC_GEP_MODE;
|
|
sc->lmc_gpio |= LMC_GEP_DATA;
|
|
sc->lmc_gpio |= LMC_GEP_CLK;
|
|
LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
|
|
|
|
lmc_gpio_mkoutput(sc, LMC_GEP_DATA | LMC_GEP_CLK | LMC_GEP_MODE );
|
|
|
|
/*
|
|
* busy wait for the chip to reset
|
|
*/
|
|
while( (LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0 &&
|
|
(timeout-- > 0))
|
|
;
|
|
|
|
printk(KERN_DEBUG "%s: Waited %d for the Xilinx to clear it's memory\n", dev->name, 500000-timeout);
|
|
|
|
for(pos = 0; pos < xc.len; pos++){
|
|
switch(data[pos]){
|
|
case 0:
|
|
sc->lmc_gpio &= ~LMC_GEP_DATA; /* Data is 0 */
|
|
break;
|
|
case 1:
|
|
sc->lmc_gpio |= LMC_GEP_DATA; /* Data is 1 */
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "%s Bad data in xilinx programming data at %d, got %d wanted 0 or 1\n", dev->name, pos, data[pos]);
|
|
sc->lmc_gpio |= LMC_GEP_DATA; /* Assume it's 1 */
|
|
}
|
|
sc->lmc_gpio &= ~LMC_GEP_CLK; /* Clock to zero */
|
|
sc->lmc_gpio |= LMC_GEP_MODE;
|
|
LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
|
|
udelay(1);
|
|
|
|
sc->lmc_gpio |= LMC_GEP_CLK; /* Put the clack back to one */
|
|
sc->lmc_gpio |= LMC_GEP_MODE;
|
|
LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
|
|
udelay(1);
|
|
}
|
|
if((LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0){
|
|
printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (corrupted data)\n", dev->name);
|
|
}
|
|
else if((LMC_CSR_READ(sc, csr_gp) & LMC_GEP_DP) == 0){
|
|
printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (done)\n", dev->name);
|
|
}
|
|
else {
|
|
printk(KERN_DEBUG "%s: Done reprogramming Xilinx, %d bits, good luck!\n", dev->name, pos);
|
|
}
|
|
|
|
lmc_gpio_mkinput(sc, 0xff);
|
|
|
|
sc->lmc_miireg16 |= LMC_MII16_FIFO_RESET;
|
|
lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
|
|
|
|
sc->lmc_miireg16 &= ~LMC_MII16_FIFO_RESET;
|
|
lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
|
|
|
|
kfree(data);
|
|
|
|
ret = 0;
|
|
|
|
break;
|
|
}
|
|
default: /*fold02*/
|
|
ret = -EBADE;
|
|
break;
|
|
}
|
|
|
|
netif_wake_queue(dev);
|
|
sc->lmc_txfull = 0;
|
|
|
|
}
|
|
break;
|
|
default: /*fold01*/
|
|
/* If we don't know what to do, give the protocol a shot. */
|
|
ret = lmc_proto_ioctl (sc, ifr, cmd);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&sc->lmc_lock, flags); /*fold01*/
|
|
|
|
lmc_trace(dev, "lmc_ioctl out");
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
/* the watchdog process that cruises around */
|
|
static void lmc_watchdog (unsigned long data) /*fold00*/
|
|
{
|
|
struct net_device *dev = (struct net_device *) data;
|
|
lmc_softc_t *sc;
|
|
int link_status;
|
|
u_int32_t ticks;
|
|
unsigned long flags;
|
|
|
|
sc = dev->priv;
|
|
|
|
lmc_trace(dev, "lmc_watchdog in");
|
|
|
|
spin_lock_irqsave(&sc->lmc_lock, flags);
|
|
|
|
if(sc->check != 0xBEAFCAFE){
|
|
printk("LMC: Corrupt net_device stuct, breaking out\n");
|
|
spin_unlock_irqrestore(&sc->lmc_lock, flags);
|
|
return;
|
|
}
|
|
|
|
|
|
/* Make sure the tx jabber and rx watchdog are off,
|
|
* and the transmit and receive processes are running.
|
|
*/
|
|
|
|
LMC_CSR_WRITE (sc, csr_15, 0x00000011);
|
|
sc->lmc_cmdmode |= TULIP_CMD_TXRUN | TULIP_CMD_RXRUN;
|
|
LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode);
|
|
|
|
if (sc->lmc_ok == 0)
|
|
goto kick_timer;
|
|
|
|
LMC_EVENT_LOG(LMC_EVENT_WATCHDOG, LMC_CSR_READ (sc, csr_status), lmc_mii_readreg (sc, 0, 16));
|
|
|
|
/* --- begin time out check -----------------------------------
|
|
* check for a transmit interrupt timeout
|
|
* Has the packet xmt vs xmt serviced threshold been exceeded */
|
|
if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
|
|
sc->stats.tx_packets > sc->lasttx_packets &&
|
|
sc->tx_TimeoutInd == 0)
|
|
{
|
|
|
|
/* wait for the watchdog to come around again */
|
|
sc->tx_TimeoutInd = 1;
|
|
}
|
|
else if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
|
|
sc->stats.tx_packets > sc->lasttx_packets &&
|
|
sc->tx_TimeoutInd)
|
|
{
|
|
|
|
LMC_EVENT_LOG(LMC_EVENT_XMTINTTMO, LMC_CSR_READ (sc, csr_status), 0);
|
|
|
|
sc->tx_TimeoutDisplay = 1;
|
|
sc->stats.tx_TimeoutCnt++;
|
|
|
|
/* DEC chip is stuck, hit it with a RESET!!!! */
|
|
lmc_running_reset (dev);
|
|
|
|
|
|
/* look at receive & transmit process state to make sure they are running */
|
|
LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
|
|
|
|
/* look at: DSR - 02 for Reg 16
|
|
* CTS - 08
|
|
* DCD - 10
|
|
* RI - 20
|
|
* for Reg 17
|
|
*/
|
|
LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg (sc, 0, 16), lmc_mii_readreg (sc, 0, 17));
|
|
|
|
/* reset the transmit timeout detection flag */
|
|
sc->tx_TimeoutInd = 0;
|
|
sc->lastlmc_taint_tx = sc->lmc_taint_tx;
|
|
sc->lasttx_packets = sc->stats.tx_packets;
|
|
}
|
|
else
|
|
{
|
|
sc->tx_TimeoutInd = 0;
|
|
sc->lastlmc_taint_tx = sc->lmc_taint_tx;
|
|
sc->lasttx_packets = sc->stats.tx_packets;
|
|
}
|
|
|
|
/* --- end time out check ----------------------------------- */
|
|
|
|
|
|
link_status = sc->lmc_media->get_link_status (sc);
|
|
|
|
/*
|
|
* hardware level link lost, but the interface is marked as up.
|
|
* Mark it as down.
|
|
*/
|
|
if ((link_status == 0) && (sc->last_link_status != 0)) {
|
|
printk(KERN_WARNING "%s: hardware/physical link down\n", dev->name);
|
|
sc->last_link_status = 0;
|
|
/* lmc_reset (sc); Why reset??? The link can go down ok */
|
|
|
|
/* Inform the world that link has been lost */
|
|
netif_carrier_off(dev);
|
|
}
|
|
|
|
/*
|
|
* hardware link is up, but the interface is marked as down.
|
|
* Bring it back up again.
|
|
*/
|
|
if (link_status != 0 && sc->last_link_status == 0) {
|
|
printk(KERN_WARNING "%s: hardware/physical link up\n", dev->name);
|
|
sc->last_link_status = 1;
|
|
/* lmc_reset (sc); Again why reset??? */
|
|
|
|
/* Inform the world that link protocol is back up. */
|
|
netif_carrier_on(dev);
|
|
|
|
/* Now we have to tell the syncppp that we had an outage
|
|
* and that it should deal. Calling sppp_reopen here
|
|
* should do the trick, but we may have to call sppp_close
|
|
* when the link goes down, and call sppp_open here.
|
|
* Subject to more testing.
|
|
* --bbraun
|
|
*/
|
|
|
|
lmc_proto_reopen(sc);
|
|
|
|
}
|
|
|
|
/* Call media specific watchdog functions */
|
|
sc->lmc_media->watchdog(sc);
|
|
|
|
/*
|
|
* Poke the transmitter to make sure it
|
|
* never stops, even if we run out of mem
|
|
*/
|
|
LMC_CSR_WRITE(sc, csr_rxpoll, 0);
|
|
|
|
/*
|
|
* Check for code that failed
|
|
* and try and fix it as appropriate
|
|
*/
|
|
if(sc->failed_ring == 1){
|
|
/*
|
|
* Failed to setup the recv/xmit rin
|
|
* Try again
|
|
*/
|
|
sc->failed_ring = 0;
|
|
lmc_softreset(sc);
|
|
}
|
|
if(sc->failed_recv_alloc == 1){
|
|
/*
|
|
* We failed to alloc mem in the
|
|
* interrupt handler, go through the rings
|
|
* and rebuild them
|
|
*/
|
|
sc->failed_recv_alloc = 0;
|
|
lmc_softreset(sc);
|
|
}
|
|
|
|
|
|
/*
|
|
* remember the timer value
|
|
*/
|
|
kick_timer:
|
|
|
|
ticks = LMC_CSR_READ (sc, csr_gp_timer);
|
|
LMC_CSR_WRITE (sc, csr_gp_timer, 0xffffffffUL);
|
|
sc->ictl.ticks = 0x0000ffff - (ticks & 0x0000ffff);
|
|
|
|
/*
|
|
* restart this timer.
|
|
*/
|
|
sc->timer.expires = jiffies + (HZ);
|
|
add_timer (&sc->timer);
|
|
|
|
spin_unlock_irqrestore(&sc->lmc_lock, flags);
|
|
|
|
lmc_trace(dev, "lmc_watchdog out");
|
|
|
|
}
|
|
|
|
static void lmc_setup(struct net_device * const dev) /*fold00*/
|
|
{
|
|
lmc_trace(dev, "lmc_setup in");
|
|
|
|
dev->type = ARPHRD_HDLC;
|
|
dev->hard_start_xmit = lmc_start_xmit;
|
|
dev->open = lmc_open;
|
|
dev->stop = lmc_close;
|
|
dev->get_stats = lmc_get_stats;
|
|
dev->do_ioctl = lmc_ioctl;
|
|
dev->tx_timeout = lmc_driver_timeout;
|
|
dev->watchdog_timeo = (HZ); /* 1 second */
|
|
|
|
lmc_trace(dev, "lmc_setup out");
|
|
}
|
|
|
|
|
|
static int __devinit lmc_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *dev;
|
|
lmc_softc_t *sc;
|
|
u16 subdevice;
|
|
u_int16_t AdapModelNum;
|
|
int err = -ENOMEM;
|
|
static int cards_found;
|
|
#ifndef GCOM
|
|
/* We name by type not by vendor */
|
|
static const char lmcname[] = "hdlc%d";
|
|
#else
|
|
/*
|
|
* GCOM uses LMC vendor name so that clients can know which card
|
|
* to attach to.
|
|
*/
|
|
static const char lmcname[] = "lmc%d";
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Allocate our own device structure
|
|
*/
|
|
dev = alloc_netdev(sizeof(lmc_softc_t), lmcname, lmc_setup);
|
|
if (!dev) {
|
|
printk (KERN_ERR "lmc:alloc_netdev for device failed\n");
|
|
goto out1;
|
|
}
|
|
|
|
lmc_trace(dev, "lmc_init_one in");
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
printk(KERN_ERR "lmc: pci enable failed:%d\n", err);
|
|
goto out2;
|
|
}
|
|
|
|
if (pci_request_regions(pdev, "lmc")) {
|
|
printk(KERN_ERR "lmc: pci_request_region failed\n");
|
|
err = -EIO;
|
|
goto out3;
|
|
}
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
if(lmc_first_load == 0){
|
|
printk(KERN_INFO "Lan Media Corporation WAN Driver Version %d.%d.%d\n",
|
|
DRIVER_MAJOR_VERSION, DRIVER_MINOR_VERSION,DRIVER_SUB_VERSION);
|
|
lmc_first_load = 1;
|
|
}
|
|
|
|
sc = dev->priv;
|
|
sc->lmc_device = dev;
|
|
sc->name = dev->name;
|
|
|
|
/* Initialize the sppp layer */
|
|
/* An ioctl can cause a subsequent detach for raw frame interface */
|
|
sc->if_type = LMC_PPP;
|
|
sc->check = 0xBEAFCAFE;
|
|
dev->base_addr = pci_resource_start(pdev, 0);
|
|
dev->irq = pdev->irq;
|
|
|
|
SET_MODULE_OWNER(dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
/*
|
|
* This will get the protocol layer ready and do any 1 time init's
|
|
* Must have a valid sc and dev structure
|
|
*/
|
|
lmc_proto_init(sc);
|
|
|
|
lmc_proto_attach(sc);
|
|
|
|
/*
|
|
* Why were we changing this???
|
|
dev->tx_queue_len = 100;
|
|
*/
|
|
|
|
/* Init the spin lock so can call it latter */
|
|
|
|
spin_lock_init(&sc->lmc_lock);
|
|
pci_set_master(pdev);
|
|
|
|
printk ("%s: detected at %lx, irq %d\n", dev->name,
|
|
dev->base_addr, dev->irq);
|
|
|
|
if (register_netdev (dev) != 0) {
|
|
printk (KERN_ERR "%s: register_netdev failed.\n", dev->name);
|
|
goto out4;
|
|
}
|
|
|
|
sc->lmc_cardtype = LMC_CARDTYPE_UNKNOWN;
|
|
sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT;
|
|
|
|
/*
|
|
*
|
|
* Check either the subvendor or the subdevice, some systems reverse
|
|
* the setting in the bois, seems to be version and arch dependent?
|
|
* Fix the error, exchange the two values
|
|
*/
|
|
if ((subdevice = pdev->subsystem_device) == PCI_VENDOR_ID_LMC)
|
|
subdevice = pdev->subsystem_vendor;
|
|
|
|
switch (subdevice) {
|
|
case PCI_DEVICE_ID_LMC_HSSI:
|
|
printk ("%s: LMC HSSI\n", dev->name);
|
|
sc->lmc_cardtype = LMC_CARDTYPE_HSSI;
|
|
sc->lmc_media = &lmc_hssi_media;
|
|
break;
|
|
case PCI_DEVICE_ID_LMC_DS3:
|
|
printk ("%s: LMC DS3\n", dev->name);
|
|
sc->lmc_cardtype = LMC_CARDTYPE_DS3;
|
|
sc->lmc_media = &lmc_ds3_media;
|
|
break;
|
|
case PCI_DEVICE_ID_LMC_SSI:
|
|
printk ("%s: LMC SSI\n", dev->name);
|
|
sc->lmc_cardtype = LMC_CARDTYPE_SSI;
|
|
sc->lmc_media = &lmc_ssi_media;
|
|
break;
|
|
case PCI_DEVICE_ID_LMC_T1:
|
|
printk ("%s: LMC T1\n", dev->name);
|
|
sc->lmc_cardtype = LMC_CARDTYPE_T1;
|
|
sc->lmc_media = &lmc_t1_media;
|
|
break;
|
|
default:
|
|
printk (KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name);
|
|
break;
|
|
}
|
|
|
|
lmc_initcsrs (sc, dev->base_addr, 8);
|
|
|
|
lmc_gpio_mkinput (sc, 0xff);
|
|
sc->lmc_gpio = 0; /* drive no signals yet */
|
|
|
|
sc->lmc_media->defaults (sc);
|
|
|
|
sc->lmc_media->set_link_status (sc, LMC_LINK_UP);
|
|
|
|
/* verify that the PCI Sub System ID matches the Adapter Model number
|
|
* from the MII register
|
|
*/
|
|
AdapModelNum = (lmc_mii_readreg (sc, 0, 3) & 0x3f0) >> 4;
|
|
|
|
if ((AdapModelNum == LMC_ADAP_T1
|
|
&& subdevice == PCI_DEVICE_ID_LMC_T1) || /* detect LMC1200 */
|
|
(AdapModelNum == LMC_ADAP_SSI
|
|
&& subdevice == PCI_DEVICE_ID_LMC_SSI) || /* detect LMC1000 */
|
|
(AdapModelNum == LMC_ADAP_DS3
|
|
&& subdevice == PCI_DEVICE_ID_LMC_DS3) || /* detect LMC5245 */
|
|
(AdapModelNum == LMC_ADAP_HSSI
|
|
&& subdevice == PCI_DEVICE_ID_LMC_HSSI))
|
|
{ /* detect LMC5200 */
|
|
|
|
}
|
|
else {
|
|
printk ("%s: Model number (%d) miscompare for PCI Subsystem ID = 0x%04x\n",
|
|
dev->name, AdapModelNum, subdevice);
|
|
// return (NULL);
|
|
}
|
|
/*
|
|
* reset clock
|
|
*/
|
|
LMC_CSR_WRITE (sc, csr_gp_timer, 0xFFFFFFFFUL);
|
|
|
|
sc->board_idx = cards_found++;
|
|
sc->stats.check = STATCHECK;
|
|
sc->stats.version_size = (DRIVER_VERSION << 16) +
|
|
sizeof (struct lmc_statistics);
|
|
sc->stats.lmc_cardtype = sc->lmc_cardtype;
|
|
|
|
sc->lmc_ok = 0;
|
|
sc->last_link_status = 0;
|
|
|
|
lmc_trace(dev, "lmc_init_one out");
|
|
return 0;
|
|
|
|
out4:
|
|
lmc_proto_detach(sc);
|
|
out3:
|
|
if (pdev) {
|
|
pci_release_regions(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
out2:
|
|
free_netdev(dev);
|
|
out1:
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Called from pci when removing module.
|
|
*/
|
|
static void __devexit lmc_remove_one (struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (dev) {
|
|
lmc_softc_t *sc = dev->priv;
|
|
|
|
printk("%s: removing...\n", dev->name);
|
|
lmc_proto_detach(sc);
|
|
unregister_netdev(dev);
|
|
free_netdev(dev);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
}
|
|
|
|
/* After this is called, packets can be sent.
|
|
* Does not initialize the addresses
|
|
*/
|
|
static int lmc_open (struct net_device *dev) /*fold00*/
|
|
{
|
|
lmc_softc_t *sc = dev->priv;
|
|
|
|
lmc_trace(dev, "lmc_open in");
|
|
|
|
lmc_led_on(sc, LMC_DS3_LED0);
|
|
|
|
lmc_dec_reset (sc);
|
|
lmc_reset (sc);
|
|
|
|
LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
|
|
LMC_EVENT_LOG(LMC_EVENT_RESET2,
|
|
lmc_mii_readreg (sc, 0, 16),
|
|
lmc_mii_readreg (sc, 0, 17));
|
|
|
|
|
|
if (sc->lmc_ok){
|
|
lmc_trace(dev, "lmc_open lmc_ok out");
|
|
return (0);
|
|
}
|
|
|
|
lmc_softreset (sc);
|
|
|
|
/* Since we have to use PCI bus, this should work on x86,alpha,ppc */
|
|
if (request_irq (dev->irq, &lmc_interrupt, SA_SHIRQ, dev->name, dev)){
|
|
printk(KERN_WARNING "%s: could not get irq: %d\n", dev->name, dev->irq);
|
|
lmc_trace(dev, "lmc_open irq failed out");
|
|
return -EAGAIN;
|
|
}
|
|
sc->got_irq = 1;
|
|
|
|
/* Assert Terminal Active */
|
|
sc->lmc_miireg16 |= LMC_MII16_LED_ALL;
|
|
sc->lmc_media->set_link_status (sc, LMC_LINK_UP);
|
|
|
|
/*
|
|
* reset to last state.
|
|
*/
|
|
sc->lmc_media->set_status (sc, NULL);
|
|
|
|
/* setup default bits to be used in tulip_desc_t transmit descriptor
|
|
* -baz */
|
|
sc->TxDescriptControlInit = (
|
|
LMC_TDES_INTERRUPT_ON_COMPLETION
|
|
| LMC_TDES_FIRST_SEGMENT
|
|
| LMC_TDES_LAST_SEGMENT
|
|
| LMC_TDES_SECOND_ADDR_CHAINED
|
|
| LMC_TDES_DISABLE_PADDING
|
|
);
|
|
|
|
if (sc->ictl.crc_length == LMC_CTL_CRC_LENGTH_16) {
|
|
/* disable 32 bit CRC generated by ASIC */
|
|
sc->TxDescriptControlInit |= LMC_TDES_ADD_CRC_DISABLE;
|
|
}
|
|
sc->lmc_media->set_crc_length(sc, sc->ictl.crc_length);
|
|
/* Acknoledge the Terminal Active and light LEDs */
|
|
|
|
/* dev->flags |= IFF_UP; */
|
|
|
|
lmc_proto_open(sc);
|
|
|
|
dev->do_ioctl = lmc_ioctl;
|
|
|
|
|
|
netif_start_queue(dev);
|
|
|
|
sc->stats.tx_tbusy0++ ;
|
|
|
|
/*
|
|
* select what interrupts we want to get
|
|
*/
|
|
sc->lmc_intrmask = 0;
|
|
/* Should be using the default interrupt mask defined in the .h file. */
|
|
sc->lmc_intrmask |= (TULIP_STS_NORMALINTR
|
|
| TULIP_STS_RXINTR
|
|
| TULIP_STS_TXINTR
|
|
| TULIP_STS_ABNRMLINTR
|
|
| TULIP_STS_SYSERROR
|
|
| TULIP_STS_TXSTOPPED
|
|
| TULIP_STS_TXUNDERFLOW
|
|
| TULIP_STS_RXSTOPPED
|
|
| TULIP_STS_RXNOBUF
|
|
);
|
|
LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask);
|
|
|
|
sc->lmc_cmdmode |= TULIP_CMD_TXRUN;
|
|
sc->lmc_cmdmode |= TULIP_CMD_RXRUN;
|
|
LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode);
|
|
|
|
sc->lmc_ok = 1; /* Run watchdog */
|
|
|
|
/*
|
|
* Set the if up now - pfb
|
|
*/
|
|
|
|
sc->last_link_status = 1;
|
|
|
|
/*
|
|
* Setup a timer for the watchdog on probe, and start it running.
|
|
* Since lmc_ok == 0, it will be a NOP for now.
|
|
*/
|
|
init_timer (&sc->timer);
|
|
sc->timer.expires = jiffies + HZ;
|
|
sc->timer.data = (unsigned long) dev;
|
|
sc->timer.function = &lmc_watchdog;
|
|
add_timer (&sc->timer);
|
|
|
|
lmc_trace(dev, "lmc_open out");
|
|
|
|
return (0);
|
|
}
|
|
|
|
/* Total reset to compensate for the AdTran DSU doing bad things
|
|
* under heavy load
|
|
*/
|
|
|
|
static void lmc_running_reset (struct net_device *dev) /*fold00*/
|
|
{
|
|
|
|
lmc_softc_t *sc = (lmc_softc_t *) dev->priv;
|
|
|
|
lmc_trace(dev, "lmc_runnig_reset in");
|
|
|
|
/* stop interrupts */
|
|
/* Clear the interrupt mask */
|
|
LMC_CSR_WRITE (sc, csr_intr, 0x00000000);
|
|
|
|
lmc_dec_reset (sc);
|
|
lmc_reset (sc);
|
|
lmc_softreset (sc);
|
|
/* sc->lmc_miireg16 |= LMC_MII16_LED_ALL; */
|
|
sc->lmc_media->set_link_status (sc, 1);
|
|
sc->lmc_media->set_status (sc, NULL);
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
sc->lmc_txfull = 0;
|
|
sc->stats.tx_tbusy0++ ;
|
|
|
|
sc->lmc_intrmask = TULIP_DEFAULT_INTR_MASK;
|
|
LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask);
|
|
|
|
sc->lmc_cmdmode |= (TULIP_CMD_TXRUN | TULIP_CMD_RXRUN);
|
|
LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode);
|
|
|
|
lmc_trace(dev, "lmc_runnin_reset_out");
|
|
}
|
|
|
|
|
|
/* This is what is called when you ifconfig down a device.
|
|
* This disables the timer for the watchdog and keepalives,
|
|
* and disables the irq for dev.
|
|
*/
|
|
static int lmc_close (struct net_device *dev) /*fold00*/
|
|
{
|
|
/* not calling release_region() as we should */
|
|
lmc_softc_t *sc;
|
|
|
|
lmc_trace(dev, "lmc_close in");
|
|
|
|
sc = dev->priv;
|
|
sc->lmc_ok = 0;
|
|
sc->lmc_media->set_link_status (sc, 0);
|
|
del_timer (&sc->timer);
|
|
lmc_proto_close(sc);
|
|
lmc_ifdown (dev);
|
|
|
|
lmc_trace(dev, "lmc_close out");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Ends the transfer of packets */
|
|
/* When the interface goes down, this is called */
|
|
static int lmc_ifdown (struct net_device *dev) /*fold00*/
|
|
{
|
|
lmc_softc_t *sc = dev->priv;
|
|
u32 csr6;
|
|
int i;
|
|
|
|
lmc_trace(dev, "lmc_ifdown in");
|
|
|
|
/* Don't let anything else go on right now */
|
|
// dev->start = 0;
|
|
netif_stop_queue(dev);
|
|
sc->stats.tx_tbusy1++ ;
|
|
|
|
/* stop interrupts */
|
|
/* Clear the interrupt mask */
|
|
LMC_CSR_WRITE (sc, csr_intr, 0x00000000);
|
|
|
|
/* Stop Tx and Rx on the chip */
|
|
csr6 = LMC_CSR_READ (sc, csr_command);
|
|
csr6 &= ~LMC_DEC_ST; /* Turn off the Transmission bit */
|
|
csr6 &= ~LMC_DEC_SR; /* Turn off the Receive bit */
|
|
LMC_CSR_WRITE (sc, csr_command, csr6);
|
|
|
|
sc->stats.rx_missed_errors +=
|
|
LMC_CSR_READ (sc, csr_missed_frames) & 0xffff;
|
|
|
|
/* release the interrupt */
|
|
if(sc->got_irq == 1){
|
|
free_irq (dev->irq, dev);
|
|
sc->got_irq = 0;
|
|
}
|
|
|
|
/* free skbuffs in the Rx queue */
|
|
for (i = 0; i < LMC_RXDESCS; i++)
|
|
{
|
|
struct sk_buff *skb = sc->lmc_rxq[i];
|
|
sc->lmc_rxq[i] = NULL;
|
|
sc->lmc_rxring[i].status = 0;
|
|
sc->lmc_rxring[i].length = 0;
|
|
sc->lmc_rxring[i].buffer1 = 0xDEADBEEF;
|
|
if (skb != NULL)
|
|
dev_kfree_skb(skb);
|
|
sc->lmc_rxq[i] = NULL;
|
|
}
|
|
|
|
for (i = 0; i < LMC_TXDESCS; i++)
|
|
{
|
|
if (sc->lmc_txq[i] != NULL)
|
|
dev_kfree_skb(sc->lmc_txq[i]);
|
|
sc->lmc_txq[i] = NULL;
|
|
}
|
|
|
|
lmc_led_off (sc, LMC_MII16_LED_ALL);
|
|
|
|
netif_wake_queue(dev);
|
|
sc->stats.tx_tbusy0++ ;
|
|
|
|
lmc_trace(dev, "lmc_ifdown out");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Interrupt handling routine. This will take an incoming packet, or clean
|
|
* up after a trasmit.
|
|
*/
|
|
static irqreturn_t lmc_interrupt (int irq, void *dev_instance, struct pt_regs *regs) /*fold00*/
|
|
{
|
|
struct net_device *dev = (struct net_device *) dev_instance;
|
|
lmc_softc_t *sc;
|
|
u32 csr;
|
|
int i;
|
|
s32 stat;
|
|
unsigned int badtx;
|
|
u32 firstcsr;
|
|
int max_work = LMC_RXDESCS;
|
|
int handled = 0;
|
|
|
|
lmc_trace(dev, "lmc_interrupt in");
|
|
|
|
sc = dev->priv;
|
|
|
|
spin_lock(&sc->lmc_lock);
|
|
|
|
/*
|
|
* Read the csr to find what interrupts we have (if any)
|
|
*/
|
|
csr = LMC_CSR_READ (sc, csr_status);
|
|
|
|
/*
|
|
* Make sure this is our interrupt
|
|
*/
|
|
if ( ! (csr & sc->lmc_intrmask)) {
|
|
goto lmc_int_fail_out;
|
|
}
|
|
|
|
firstcsr = csr;
|
|
|
|
/* always go through this loop at least once */
|
|
while (csr & sc->lmc_intrmask) {
|
|
handled = 1;
|
|
|
|
/*
|
|
* Clear interrupt bits, we handle all case below
|
|
*/
|
|
LMC_CSR_WRITE (sc, csr_status, csr);
|
|
|
|
/*
|
|
* One of
|
|
* - Transmit process timed out CSR5<1>
|
|
* - Transmit jabber timeout CSR5<3>
|
|
* - Transmit underflow CSR5<5>
|
|
* - Transmit Receiver buffer unavailable CSR5<7>
|
|
* - Receive process stopped CSR5<8>
|
|
* - Receive watchdog timeout CSR5<9>
|
|
* - Early transmit interrupt CSR5<10>
|
|
*
|
|
* Is this really right? Should we do a running reset for jabber?
|
|
* (being a WAN card and all)
|
|
*/
|
|
if (csr & TULIP_STS_ABNRMLINTR){
|
|
lmc_running_reset (dev);
|
|
break;
|
|
}
|
|
|
|
if (csr & TULIP_STS_RXINTR){
|
|
lmc_trace(dev, "rx interrupt");
|
|
lmc_rx (dev);
|
|
|
|
}
|
|
if (csr & (TULIP_STS_TXINTR | TULIP_STS_TXNOBUF | TULIP_STS_TXSTOPPED)) {
|
|
|
|
int n_compl = 0 ;
|
|
/* reset the transmit timeout detection flag -baz */
|
|
sc->stats.tx_NoCompleteCnt = 0;
|
|
|
|
badtx = sc->lmc_taint_tx;
|
|
i = badtx % LMC_TXDESCS;
|
|
|
|
while ((badtx < sc->lmc_next_tx)) {
|
|
stat = sc->lmc_txring[i].status;
|
|
|
|
LMC_EVENT_LOG (LMC_EVENT_XMTINT, stat,
|
|
sc->lmc_txring[i].length);
|
|
/*
|
|
* If bit 31 is 1 the tulip owns it break out of the loop
|
|
*/
|
|
if (stat & 0x80000000)
|
|
break;
|
|
|
|
n_compl++ ; /* i.e., have an empty slot in ring */
|
|
/*
|
|
* If we have no skbuff or have cleared it
|
|
* Already continue to the next buffer
|
|
*/
|
|
if (sc->lmc_txq[i] == NULL)
|
|
continue;
|
|
|
|
/*
|
|
* Check the total error summary to look for any errors
|
|
*/
|
|
if (stat & 0x8000) {
|
|
sc->stats.tx_errors++;
|
|
if (stat & 0x4104)
|
|
sc->stats.tx_aborted_errors++;
|
|
if (stat & 0x0C00)
|
|
sc->stats.tx_carrier_errors++;
|
|
if (stat & 0x0200)
|
|
sc->stats.tx_window_errors++;
|
|
if (stat & 0x0002)
|
|
sc->stats.tx_fifo_errors++;
|
|
}
|
|
else {
|
|
|
|
sc->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff;
|
|
|
|
sc->stats.tx_packets++;
|
|
}
|
|
|
|
// dev_kfree_skb(sc->lmc_txq[i]);
|
|
dev_kfree_skb_irq(sc->lmc_txq[i]);
|
|
sc->lmc_txq[i] = NULL;
|
|
|
|
badtx++;
|
|
i = badtx % LMC_TXDESCS;
|
|
}
|
|
|
|
if (sc->lmc_next_tx - badtx > LMC_TXDESCS)
|
|
{
|
|
printk ("%s: out of sync pointer\n", dev->name);
|
|
badtx += LMC_TXDESCS;
|
|
}
|
|
LMC_EVENT_LOG(LMC_EVENT_TBUSY0, n_compl, 0);
|
|
sc->lmc_txfull = 0;
|
|
netif_wake_queue(dev);
|
|
sc->stats.tx_tbusy0++ ;
|
|
|
|
|
|
#ifdef DEBUG
|
|
sc->stats.dirtyTx = badtx;
|
|
sc->stats.lmc_next_tx = sc->lmc_next_tx;
|
|
sc->stats.lmc_txfull = sc->lmc_txfull;
|
|
#endif
|
|
sc->lmc_taint_tx = badtx;
|
|
|
|
/*
|
|
* Why was there a break here???
|
|
*/
|
|
} /* end handle transmit interrupt */
|
|
|
|
if (csr & TULIP_STS_SYSERROR) {
|
|
u32 error;
|
|
printk (KERN_WARNING "%s: system bus error csr: %#8.8x\n", dev->name, csr);
|
|
error = csr>>23 & 0x7;
|
|
switch(error){
|
|
case 0x000:
|
|
printk(KERN_WARNING "%s: Parity Fault (bad)\n", dev->name);
|
|
break;
|
|
case 0x001:
|
|
printk(KERN_WARNING "%s: Master Abort (naughty)\n", dev->name);
|
|
break;
|
|
case 0x010:
|
|
printk(KERN_WARNING "%s: Target Abort (not so naughty)\n", dev->name);
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "%s: This bus error code was supposed to be reserved!\n", dev->name);
|
|
}
|
|
lmc_dec_reset (sc);
|
|
lmc_reset (sc);
|
|
LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
|
|
LMC_EVENT_LOG(LMC_EVENT_RESET2,
|
|
lmc_mii_readreg (sc, 0, 16),
|
|
lmc_mii_readreg (sc, 0, 17));
|
|
|
|
}
|
|
|
|
|
|
if(max_work-- <= 0)
|
|
break;
|
|
|
|
/*
|
|
* Get current csr status to make sure
|
|
* we've cleared all interrupts
|
|
*/
|
|
csr = LMC_CSR_READ (sc, csr_status);
|
|
} /* end interrupt loop */
|
|
LMC_EVENT_LOG(LMC_EVENT_INT, firstcsr, csr);
|
|
|
|
lmc_int_fail_out:
|
|
|
|
spin_unlock(&sc->lmc_lock);
|
|
|
|
lmc_trace(dev, "lmc_interrupt out");
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00*/
|
|
{
|
|
lmc_softc_t *sc;
|
|
u32 flag;
|
|
int entry;
|
|
int ret = 0;
|
|
unsigned long flags;
|
|
|
|
lmc_trace(dev, "lmc_start_xmit in");
|
|
|
|
sc = dev->priv;
|
|
|
|
spin_lock_irqsave(&sc->lmc_lock, flags);
|
|
|
|
/* normal path, tbusy known to be zero */
|
|
|
|
entry = sc->lmc_next_tx % LMC_TXDESCS;
|
|
|
|
sc->lmc_txq[entry] = skb;
|
|
sc->lmc_txring[entry].buffer1 = virt_to_bus (skb->data);
|
|
|
|
LMC_CONSOLE_LOG("xmit", skb->data, skb->len);
|
|
|
|
#ifndef GCOM
|
|
/* If the queue is less than half full, don't interrupt */
|
|
if (sc->lmc_next_tx - sc->lmc_taint_tx < LMC_TXDESCS / 2)
|
|
{
|
|
/* Do not interrupt on completion of this packet */
|
|
flag = 0x60000000;
|
|
netif_wake_queue(dev);
|
|
}
|
|
else if (sc->lmc_next_tx - sc->lmc_taint_tx == LMC_TXDESCS / 2)
|
|
{
|
|
/* This generates an interrupt on completion of this packet */
|
|
flag = 0xe0000000;
|
|
netif_wake_queue(dev);
|
|
}
|
|
else if (sc->lmc_next_tx - sc->lmc_taint_tx < LMC_TXDESCS - 1)
|
|
{
|
|
/* Do not interrupt on completion of this packet */
|
|
flag = 0x60000000;
|
|
netif_wake_queue(dev);
|
|
}
|
|
else
|
|
{
|
|
/* This generates an interrupt on completion of this packet */
|
|
flag = 0xe0000000;
|
|
sc->lmc_txfull = 1;
|
|
netif_stop_queue(dev);
|
|
}
|
|
#else
|
|
flag = LMC_TDES_INTERRUPT_ON_COMPLETION;
|
|
|
|
if (sc->lmc_next_tx - sc->lmc_taint_tx >= LMC_TXDESCS - 1)
|
|
{ /* ring full, go busy */
|
|
sc->lmc_txfull = 1;
|
|
netif_stop_queue(dev);
|
|
sc->stats.tx_tbusy1++ ;
|
|
LMC_EVENT_LOG(LMC_EVENT_TBUSY1, entry, 0);
|
|
}
|
|
#endif
|
|
|
|
|
|
if (entry == LMC_TXDESCS - 1) /* last descriptor in ring */
|
|
flag |= LMC_TDES_END_OF_RING; /* flag as such for Tulip */
|
|
|
|
/* don't pad small packets either */
|
|
flag = sc->lmc_txring[entry].length = (skb->len) | flag |
|
|
sc->TxDescriptControlInit;
|
|
|
|
/* set the transmit timeout flag to be checked in
|
|
* the watchdog timer handler. -baz
|
|
*/
|
|
|
|
sc->stats.tx_NoCompleteCnt++;
|
|
sc->lmc_next_tx++;
|
|
|
|
/* give ownership to the chip */
|
|
LMC_EVENT_LOG(LMC_EVENT_XMT, flag, entry);
|
|
sc->lmc_txring[entry].status = 0x80000000;
|
|
|
|
/* send now! */
|
|
LMC_CSR_WRITE (sc, csr_txpoll, 0);
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
spin_unlock_irqrestore(&sc->lmc_lock, flags);
|
|
|
|
lmc_trace(dev, "lmc_start_xmit_out");
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int lmc_rx (struct net_device *dev) /*fold00*/
|
|
{
|
|
lmc_softc_t *sc;
|
|
int i;
|
|
int rx_work_limit = LMC_RXDESCS;
|
|
unsigned int next_rx;
|
|
int rxIntLoopCnt; /* debug -baz */
|
|
int localLengthErrCnt = 0;
|
|
long stat;
|
|
struct sk_buff *skb, *nsb;
|
|
u16 len;
|
|
|
|
lmc_trace(dev, "lmc_rx in");
|
|
|
|
sc = dev->priv;
|
|
|
|
lmc_led_on(sc, LMC_DS3_LED3);
|
|
|
|
rxIntLoopCnt = 0; /* debug -baz */
|
|
|
|
i = sc->lmc_next_rx % LMC_RXDESCS;
|
|
next_rx = sc->lmc_next_rx;
|
|
|
|
while (((stat = sc->lmc_rxring[i].status) & LMC_RDES_OWN_BIT) != DESC_OWNED_BY_DC21X4)
|
|
{
|
|
rxIntLoopCnt++; /* debug -baz */
|
|
len = ((stat & LMC_RDES_FRAME_LENGTH) >> RDES_FRAME_LENGTH_BIT_NUMBER);
|
|
if ((stat & 0x0300) != 0x0300) { /* Check first segment and last segment */
|
|
if ((stat & 0x0000ffff) != 0x7fff) {
|
|
/* Oversized frame */
|
|
sc->stats.rx_length_errors++;
|
|
goto skip_packet;
|
|
}
|
|
}
|
|
|
|
if(stat & 0x00000008){ /* Catch a dribbling bit error */
|
|
sc->stats.rx_errors++;
|
|
sc->stats.rx_frame_errors++;
|
|
goto skip_packet;
|
|
}
|
|
|
|
|
|
if(stat & 0x00000004){ /* Catch a CRC error by the Xilinx */
|
|
sc->stats.rx_errors++;
|
|
sc->stats.rx_crc_errors++;
|
|
goto skip_packet;
|
|
}
|
|
|
|
|
|
if (len > LMC_PKT_BUF_SZ){
|
|
sc->stats.rx_length_errors++;
|
|
localLengthErrCnt++;
|
|
goto skip_packet;
|
|
}
|
|
|
|
if (len < sc->lmc_crcSize + 2) {
|
|
sc->stats.rx_length_errors++;
|
|
sc->stats.rx_SmallPktCnt++;
|
|
localLengthErrCnt++;
|
|
goto skip_packet;
|
|
}
|
|
|
|
if(stat & 0x00004000){
|
|
printk(KERN_WARNING "%s: Receiver descriptor error, receiver out of sync?\n", dev->name);
|
|
}
|
|
|
|
len -= sc->lmc_crcSize;
|
|
|
|
skb = sc->lmc_rxq[i];
|
|
|
|
/*
|
|
* We ran out of memory at some point
|
|
* just allocate an skb buff and continue.
|
|
*/
|
|
|
|
if(skb == 0x0){
|
|
nsb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2);
|
|
if (nsb) {
|
|
sc->lmc_rxq[i] = nsb;
|
|
nsb->dev = dev;
|
|
sc->lmc_rxring[i].buffer1 = virt_to_bus (nsb->tail);
|
|
}
|
|
sc->failed_recv_alloc = 1;
|
|
goto skip_packet;
|
|
}
|
|
|
|
dev->last_rx = jiffies;
|
|
sc->stats.rx_packets++;
|
|
sc->stats.rx_bytes += len;
|
|
|
|
LMC_CONSOLE_LOG("recv", skb->data, len);
|
|
|
|
/*
|
|
* I'm not sure of the sanity of this
|
|
* Packets could be arriving at a constant
|
|
* 44.210mbits/sec and we're going to copy
|
|
* them into a new buffer??
|
|
*/
|
|
|
|
if(len > (LMC_MTU - (LMC_MTU>>2))){ /* len > LMC_MTU * 0.75 */
|
|
/*
|
|
* If it's a large packet don't copy it just hand it up
|
|
*/
|
|
give_it_anyways:
|
|
|
|
sc->lmc_rxq[i] = NULL;
|
|
sc->lmc_rxring[i].buffer1 = 0x0;
|
|
|
|
skb_put (skb, len);
|
|
skb->protocol = lmc_proto_type(sc, skb);
|
|
skb->protocol = htons(ETH_P_WAN_PPP);
|
|
skb->mac.raw = skb->data;
|
|
// skb->nh.raw = skb->data;
|
|
skb->dev = dev;
|
|
lmc_proto_netif(sc, skb);
|
|
|
|
/*
|
|
* This skb will be destroyed by the upper layers, make a new one
|
|
*/
|
|
nsb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2);
|
|
if (nsb) {
|
|
sc->lmc_rxq[i] = nsb;
|
|
nsb->dev = dev;
|
|
sc->lmc_rxring[i].buffer1 = virt_to_bus (nsb->tail);
|
|
/* Transferred to 21140 below */
|
|
}
|
|
else {
|
|
/*
|
|
* We've run out of memory, stop trying to allocate
|
|
* memory and exit the interrupt handler
|
|
*
|
|
* The chip may run out of receivers and stop
|
|
* in which care we'll try to allocate the buffer
|
|
* again. (once a second)
|
|
*/
|
|
sc->stats.rx_BuffAllocErr++;
|
|
LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len);
|
|
sc->failed_recv_alloc = 1;
|
|
goto skip_out_of_mem;
|
|
}
|
|
}
|
|
else {
|
|
nsb = dev_alloc_skb(len);
|
|
if(!nsb) {
|
|
goto give_it_anyways;
|
|
}
|
|
memcpy(skb_put(nsb, len), skb->data, len);
|
|
|
|
nsb->protocol = lmc_proto_type(sc, skb);
|
|
nsb->mac.raw = nsb->data;
|
|
// nsb->nh.raw = nsb->data;
|
|
nsb->dev = dev;
|
|
lmc_proto_netif(sc, nsb);
|
|
}
|
|
|
|
skip_packet:
|
|
LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len);
|
|
sc->lmc_rxring[i].status = DESC_OWNED_BY_DC21X4;
|
|
|
|
sc->lmc_next_rx++;
|
|
i = sc->lmc_next_rx % LMC_RXDESCS;
|
|
rx_work_limit--;
|
|
if (rx_work_limit < 0)
|
|
break;
|
|
}
|
|
|
|
/* detect condition for LMC1000 where DSU cable attaches and fills
|
|
* descriptors with bogus packets
|
|
*
|
|
if (localLengthErrCnt > LMC_RXDESCS - 3) {
|
|
sc->stats.rx_BadPktSurgeCnt++;
|
|
LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE,
|
|
localLengthErrCnt,
|
|
sc->stats.rx_BadPktSurgeCnt);
|
|
} */
|
|
|
|
/* save max count of receive descriptors serviced */
|
|
if (rxIntLoopCnt > sc->stats.rxIntLoopCnt) {
|
|
sc->stats.rxIntLoopCnt = rxIntLoopCnt; /* debug -baz */
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
if (rxIntLoopCnt == 0)
|
|
{
|
|
for (i = 0; i < LMC_RXDESCS; i++)
|
|
{
|
|
if ((sc->lmc_rxring[i].status & LMC_RDES_OWN_BIT)
|
|
!= DESC_OWNED_BY_DC21X4)
|
|
{
|
|
rxIntLoopCnt++;
|
|
}
|
|
}
|
|
LMC_EVENT_LOG(LMC_EVENT_RCVEND, rxIntLoopCnt, 0);
|
|
}
|
|
#endif
|
|
|
|
|
|
lmc_led_off(sc, LMC_DS3_LED3);
|
|
|
|
skip_out_of_mem:
|
|
|
|
lmc_trace(dev, "lmc_rx out");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct net_device_stats *lmc_get_stats (struct net_device *dev) /*fold00*/
|
|
{
|
|
lmc_softc_t *sc = dev->priv;
|
|
unsigned long flags;
|
|
|
|
lmc_trace(dev, "lmc_get_stats in");
|
|
|
|
|
|
spin_lock_irqsave(&sc->lmc_lock, flags);
|
|
|
|
sc->stats.rx_missed_errors += LMC_CSR_READ (sc, csr_missed_frames) & 0xffff;
|
|
|
|
spin_unlock_irqrestore(&sc->lmc_lock, flags);
|
|
|
|
lmc_trace(dev, "lmc_get_stats out");
|
|
|
|
return (struct net_device_stats *) &sc->stats;
|
|
}
|
|
|
|
static struct pci_driver lmc_driver = {
|
|
.name = "lmc",
|
|
.id_table = lmc_pci_tbl,
|
|
.probe = lmc_init_one,
|
|
.remove = __devexit_p(lmc_remove_one),
|
|
};
|
|
|
|
static int __init init_lmc(void)
|
|
{
|
|
return pci_module_init(&lmc_driver);
|
|
}
|
|
|
|
static void __exit exit_lmc(void)
|
|
{
|
|
pci_unregister_driver(&lmc_driver);
|
|
}
|
|
|
|
module_init(init_lmc);
|
|
module_exit(exit_lmc);
|
|
|
|
unsigned lmc_mii_readreg (lmc_softc_t * const sc, unsigned devaddr, unsigned regno) /*fold00*/
|
|
{
|
|
int i;
|
|
int command = (0xf6 << 10) | (devaddr << 5) | regno;
|
|
int retval = 0;
|
|
|
|
lmc_trace(sc->lmc_device, "lmc_mii_readreg in");
|
|
|
|
LMC_MII_SYNC (sc);
|
|
|
|
lmc_trace(sc->lmc_device, "lmc_mii_readreg: done sync");
|
|
|
|
for (i = 15; i >= 0; i--)
|
|
{
|
|
int dataval = (command & (1 << i)) ? 0x20000 : 0;
|
|
|
|
LMC_CSR_WRITE (sc, csr_9, dataval);
|
|
lmc_delay ();
|
|
/* __SLOW_DOWN_IO; */
|
|
LMC_CSR_WRITE (sc, csr_9, dataval | 0x10000);
|
|
lmc_delay ();
|
|
/* __SLOW_DOWN_IO; */
|
|
}
|
|
|
|
lmc_trace(sc->lmc_device, "lmc_mii_readreg: done1");
|
|
|
|
for (i = 19; i > 0; i--)
|
|
{
|
|
LMC_CSR_WRITE (sc, csr_9, 0x40000);
|
|
lmc_delay ();
|
|
/* __SLOW_DOWN_IO; */
|
|
retval = (retval << 1) | ((LMC_CSR_READ (sc, csr_9) & 0x80000) ? 1 : 0);
|
|
LMC_CSR_WRITE (sc, csr_9, 0x40000 | 0x10000);
|
|
lmc_delay ();
|
|
/* __SLOW_DOWN_IO; */
|
|
}
|
|
|
|
lmc_trace(sc->lmc_device, "lmc_mii_readreg out");
|
|
|
|
return (retval >> 1) & 0xffff;
|
|
}
|
|
|
|
void lmc_mii_writereg (lmc_softc_t * const sc, unsigned devaddr, unsigned regno, unsigned data) /*fold00*/
|
|
{
|
|
int i = 32;
|
|
int command = (0x5002 << 16) | (devaddr << 23) | (regno << 18) | data;
|
|
|
|
lmc_trace(sc->lmc_device, "lmc_mii_writereg in");
|
|
|
|
LMC_MII_SYNC (sc);
|
|
|
|
i = 31;
|
|
while (i >= 0)
|
|
{
|
|
int datav;
|
|
|
|
if (command & (1 << i))
|
|
datav = 0x20000;
|
|
else
|
|
datav = 0x00000;
|
|
|
|
LMC_CSR_WRITE (sc, csr_9, datav);
|
|
lmc_delay ();
|
|
/* __SLOW_DOWN_IO; */
|
|
LMC_CSR_WRITE (sc, csr_9, (datav | 0x10000));
|
|
lmc_delay ();
|
|
/* __SLOW_DOWN_IO; */
|
|
i--;
|
|
}
|
|
|
|
i = 2;
|
|
while (i > 0)
|
|
{
|
|
LMC_CSR_WRITE (sc, csr_9, 0x40000);
|
|
lmc_delay ();
|
|
/* __SLOW_DOWN_IO; */
|
|
LMC_CSR_WRITE (sc, csr_9, 0x50000);
|
|
lmc_delay ();
|
|
/* __SLOW_DOWN_IO; */
|
|
i--;
|
|
}
|
|
|
|
lmc_trace(sc->lmc_device, "lmc_mii_writereg out");
|
|
}
|
|
|
|
static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/
|
|
{
|
|
int i;
|
|
|
|
lmc_trace(sc->lmc_device, "lmc_softreset in");
|
|
|
|
/* Initialize the receive rings and buffers. */
|
|
sc->lmc_txfull = 0;
|
|
sc->lmc_next_rx = 0;
|
|
sc->lmc_next_tx = 0;
|
|
sc->lmc_taint_rx = 0;
|
|
sc->lmc_taint_tx = 0;
|
|
|
|
/*
|
|
* Setup each one of the receiver buffers
|
|
* allocate an skbuff for each one, setup the descriptor table
|
|
* and point each buffer at the next one
|
|
*/
|
|
|
|
for (i = 0; i < LMC_RXDESCS; i++)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
if (sc->lmc_rxq[i] == NULL)
|
|
{
|
|
skb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2);
|
|
if(skb == NULL){
|
|
printk(KERN_WARNING "%s: Failed to allocate receiver ring, will try again\n", sc->name);
|
|
sc->failed_ring = 1;
|
|
break;
|
|
}
|
|
else{
|
|
sc->lmc_rxq[i] = skb;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
skb = sc->lmc_rxq[i];
|
|
}
|
|
|
|
skb->dev = sc->lmc_device;
|
|
|
|
/* owned by 21140 */
|
|
sc->lmc_rxring[i].status = 0x80000000;
|
|
|
|
/* used to be PKT_BUF_SZ now uses skb since we lose some to head room */
|
|
sc->lmc_rxring[i].length = skb->end - skb->data;
|
|
|
|
/* use to be tail which is dumb since you're thinking why write
|
|
* to the end of the packj,et but since there's nothing there tail == data
|
|
*/
|
|
sc->lmc_rxring[i].buffer1 = virt_to_bus (skb->data);
|
|
|
|
/* This is fair since the structure is static and we have the next address */
|
|
sc->lmc_rxring[i].buffer2 = virt_to_bus (&sc->lmc_rxring[i + 1]);
|
|
|
|
}
|
|
|
|
/*
|
|
* Sets end of ring
|
|
*/
|
|
sc->lmc_rxring[i - 1].length |= 0x02000000; /* Set end of buffers flag */
|
|
sc->lmc_rxring[i - 1].buffer2 = virt_to_bus (&sc->lmc_rxring[0]); /* Point back to the start */
|
|
LMC_CSR_WRITE (sc, csr_rxlist, virt_to_bus (sc->lmc_rxring)); /* write base address */
|
|
|
|
|
|
/* Initialize the transmit rings and buffers */
|
|
for (i = 0; i < LMC_TXDESCS; i++)
|
|
{
|
|
if (sc->lmc_txq[i] != NULL){ /* have buffer */
|
|
dev_kfree_skb(sc->lmc_txq[i]); /* free it */
|
|
sc->stats.tx_dropped++; /* We just dropped a packet */
|
|
}
|
|
sc->lmc_txq[i] = NULL;
|
|
sc->lmc_txring[i].status = 0x00000000;
|
|
sc->lmc_txring[i].buffer2 = virt_to_bus (&sc->lmc_txring[i + 1]);
|
|
}
|
|
sc->lmc_txring[i - 1].buffer2 = virt_to_bus (&sc->lmc_txring[0]);
|
|
LMC_CSR_WRITE (sc, csr_txlist, virt_to_bus (sc->lmc_txring));
|
|
|
|
lmc_trace(sc->lmc_device, "lmc_softreset out");
|
|
}
|
|
|
|
void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/
|
|
{
|
|
lmc_trace(sc->lmc_device, "lmc_gpio_mkinput in");
|
|
sc->lmc_gpio_io &= ~bits;
|
|
LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io));
|
|
lmc_trace(sc->lmc_device, "lmc_gpio_mkinput out");
|
|
}
|
|
|
|
void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/
|
|
{
|
|
lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput in");
|
|
sc->lmc_gpio_io |= bits;
|
|
LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io));
|
|
lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput out");
|
|
}
|
|
|
|
void lmc_led_on(lmc_softc_t * const sc, u_int32_t led) /*fold00*/
|
|
{
|
|
lmc_trace(sc->lmc_device, "lmc_led_on in");
|
|
if((~sc->lmc_miireg16) & led){ /* Already on! */
|
|
lmc_trace(sc->lmc_device, "lmc_led_on aon out");
|
|
return;
|
|
}
|
|
|
|
sc->lmc_miireg16 &= ~led;
|
|
lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
|
|
lmc_trace(sc->lmc_device, "lmc_led_on out");
|
|
}
|
|
|
|
void lmc_led_off(lmc_softc_t * const sc, u_int32_t led) /*fold00*/
|
|
{
|
|
lmc_trace(sc->lmc_device, "lmc_led_off in");
|
|
if(sc->lmc_miireg16 & led){ /* Already set don't do anything */
|
|
lmc_trace(sc->lmc_device, "lmc_led_off aoff out");
|
|
return;
|
|
}
|
|
|
|
sc->lmc_miireg16 |= led;
|
|
lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
|
|
lmc_trace(sc->lmc_device, "lmc_led_off out");
|
|
}
|
|
|
|
static void lmc_reset(lmc_softc_t * const sc) /*fold00*/
|
|
{
|
|
lmc_trace(sc->lmc_device, "lmc_reset in");
|
|
sc->lmc_miireg16 |= LMC_MII16_FIFO_RESET;
|
|
lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
|
|
|
|
sc->lmc_miireg16 &= ~LMC_MII16_FIFO_RESET;
|
|
lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
|
|
|
|
/*
|
|
* make some of the GPIO pins be outputs
|
|
*/
|
|
lmc_gpio_mkoutput(sc, LMC_GEP_RESET);
|
|
|
|
/*
|
|
* RESET low to force state reset. This also forces
|
|
* the transmitter clock to be internal, but we expect to reset
|
|
* that later anyway.
|
|
*/
|
|
sc->lmc_gpio &= ~(LMC_GEP_RESET);
|
|
LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
|
|
|
|
/*
|
|
* hold for more than 10 microseconds
|
|
*/
|
|
udelay(50);
|
|
|
|
/*
|
|
* stop driving Xilinx-related signals
|
|
*/
|
|
lmc_gpio_mkinput(sc, LMC_GEP_RESET);
|
|
|
|
/*
|
|
* Call media specific init routine
|
|
*/
|
|
sc->lmc_media->init(sc);
|
|
|
|
sc->stats.resetCount++;
|
|
lmc_trace(sc->lmc_device, "lmc_reset out");
|
|
}
|
|
|
|
static void lmc_dec_reset(lmc_softc_t * const sc) /*fold00*/
|
|
{
|
|
u_int32_t val;
|
|
lmc_trace(sc->lmc_device, "lmc_dec_reset in");
|
|
|
|
/*
|
|
* disable all interrupts
|
|
*/
|
|
sc->lmc_intrmask = 0;
|
|
LMC_CSR_WRITE(sc, csr_intr, sc->lmc_intrmask);
|
|
|
|
/*
|
|
* Reset the chip with a software reset command.
|
|
* Wait 10 microseconds (actually 50 PCI cycles but at
|
|
* 33MHz that comes to two microseconds but wait a
|
|
* bit longer anyways)
|
|
*/
|
|
LMC_CSR_WRITE(sc, csr_busmode, TULIP_BUSMODE_SWRESET);
|
|
udelay(25);
|
|
#ifdef __sparc__
|
|
sc->lmc_busmode = LMC_CSR_READ(sc, csr_busmode);
|
|
sc->lmc_busmode = 0x00100000;
|
|
sc->lmc_busmode &= ~TULIP_BUSMODE_SWRESET;
|
|
LMC_CSR_WRITE(sc, csr_busmode, sc->lmc_busmode);
|
|
#endif
|
|
sc->lmc_cmdmode = LMC_CSR_READ(sc, csr_command);
|
|
|
|
/*
|
|
* We want:
|
|
* no ethernet address in frames we write
|
|
* disable padding (txdesc, padding disable)
|
|
* ignore runt frames (rdes0 bit 15)
|
|
* no receiver watchdog or transmitter jabber timer
|
|
* (csr15 bit 0,14 == 1)
|
|
* if using 16-bit CRC, turn off CRC (trans desc, crc disable)
|
|
*/
|
|
|
|
sc->lmc_cmdmode |= ( TULIP_CMD_PROMISCUOUS
|
|
| TULIP_CMD_FULLDUPLEX
|
|
| TULIP_CMD_PASSBADPKT
|
|
| TULIP_CMD_NOHEARTBEAT
|
|
| TULIP_CMD_PORTSELECT
|
|
| TULIP_CMD_RECEIVEALL
|
|
| TULIP_CMD_MUSTBEONE
|
|
);
|
|
sc->lmc_cmdmode &= ~( TULIP_CMD_OPERMODE
|
|
| TULIP_CMD_THRESHOLDCTL
|
|
| TULIP_CMD_STOREFWD
|
|
| TULIP_CMD_TXTHRSHLDCTL
|
|
);
|
|
|
|
LMC_CSR_WRITE(sc, csr_command, sc->lmc_cmdmode);
|
|
|
|
/*
|
|
* disable receiver watchdog and transmit jabber
|
|
*/
|
|
val = LMC_CSR_READ(sc, csr_sia_general);
|
|
val |= (TULIP_WATCHDOG_TXDISABLE | TULIP_WATCHDOG_RXDISABLE);
|
|
LMC_CSR_WRITE(sc, csr_sia_general, val);
|
|
|
|
lmc_trace(sc->lmc_device, "lmc_dec_reset out");
|
|
}
|
|
|
|
static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, /*fold00*/
|
|
size_t csr_size)
|
|
{
|
|
lmc_trace(sc->lmc_device, "lmc_initcsrs in");
|
|
sc->lmc_csrs.csr_busmode = csr_base + 0 * csr_size;
|
|
sc->lmc_csrs.csr_txpoll = csr_base + 1 * csr_size;
|
|
sc->lmc_csrs.csr_rxpoll = csr_base + 2 * csr_size;
|
|
sc->lmc_csrs.csr_rxlist = csr_base + 3 * csr_size;
|
|
sc->lmc_csrs.csr_txlist = csr_base + 4 * csr_size;
|
|
sc->lmc_csrs.csr_status = csr_base + 5 * csr_size;
|
|
sc->lmc_csrs.csr_command = csr_base + 6 * csr_size;
|
|
sc->lmc_csrs.csr_intr = csr_base + 7 * csr_size;
|
|
sc->lmc_csrs.csr_missed_frames = csr_base + 8 * csr_size;
|
|
sc->lmc_csrs.csr_9 = csr_base + 9 * csr_size;
|
|
sc->lmc_csrs.csr_10 = csr_base + 10 * csr_size;
|
|
sc->lmc_csrs.csr_11 = csr_base + 11 * csr_size;
|
|
sc->lmc_csrs.csr_12 = csr_base + 12 * csr_size;
|
|
sc->lmc_csrs.csr_13 = csr_base + 13 * csr_size;
|
|
sc->lmc_csrs.csr_14 = csr_base + 14 * csr_size;
|
|
sc->lmc_csrs.csr_15 = csr_base + 15 * csr_size;
|
|
lmc_trace(sc->lmc_device, "lmc_initcsrs out");
|
|
}
|
|
|
|
static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/
|
|
lmc_softc_t *sc;
|
|
u32 csr6;
|
|
unsigned long flags;
|
|
|
|
lmc_trace(dev, "lmc_driver_timeout in");
|
|
|
|
sc = dev->priv;
|
|
|
|
spin_lock_irqsave(&sc->lmc_lock, flags);
|
|
|
|
printk("%s: Xmitter busy|\n", dev->name);
|
|
|
|
sc->stats.tx_tbusy_calls++ ;
|
|
if (jiffies - dev->trans_start < TX_TIMEOUT) {
|
|
goto bug_out;
|
|
}
|
|
|
|
/*
|
|
* Chip seems to have locked up
|
|
* Reset it
|
|
* This whips out all our decriptor
|
|
* table and starts from scartch
|
|
*/
|
|
|
|
LMC_EVENT_LOG(LMC_EVENT_XMTPRCTMO,
|
|
LMC_CSR_READ (sc, csr_status),
|
|
sc->stats.tx_ProcTimeout);
|
|
|
|
lmc_running_reset (dev);
|
|
|
|
LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
|
|
LMC_EVENT_LOG(LMC_EVENT_RESET2,
|
|
lmc_mii_readreg (sc, 0, 16),
|
|
lmc_mii_readreg (sc, 0, 17));
|
|
|
|
/* restart the tx processes */
|
|
csr6 = LMC_CSR_READ (sc, csr_command);
|
|
LMC_CSR_WRITE (sc, csr_command, csr6 | 0x0002);
|
|
LMC_CSR_WRITE (sc, csr_command, csr6 | 0x2002);
|
|
|
|
/* immediate transmit */
|
|
LMC_CSR_WRITE (sc, csr_txpoll, 0);
|
|
|
|
sc->stats.tx_errors++;
|
|
sc->stats.tx_ProcTimeout++; /* -baz */
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
bug_out:
|
|
|
|
spin_unlock_irqrestore(&sc->lmc_lock, flags);
|
|
|
|
lmc_trace(dev, "lmc_driver_timout out");
|
|
|
|
|
|
}
|